Finding the best grizzly dust collector remote switch suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best grizzly dust collector remote switch
1. WEN 3410 3-Speed Remote-Controlled Air Filtration System (300/350/400 CFM), Basic w/ RF Remote (400 CFM)
Feature
Circulate the air in a 400 square foot room up to 7.5 times per hourThree-speed operation flows air at a rate of 300, 350, or 400 cubic feet per minute
Includes a 1-micron filter and a 5-micron pre-filter, both of which can be easily replaced
Programmable timer automatically shuts unit off after set number of minutes
Remote control allows users to set timer, change speed and power the unit on and off from up to 26 feet away
Description
Remember when your workshop was full of clean air? Air-borne dust particulates can dirty up a woodworker's workshop and harm a healthy respiratory system, but with the WEN 3-Speed Remote-Controlled Air Filtration System, you no longer need to worry. This system eradicates these contaminants by catching them in one of the two easily cleanable filters while circulating the air in your work area. The powerful 1/6 HP motor leaves no stone unturned, collecting every contaminant in its path. Quiet system creates 50 to 60 dB of noise and is controllable up to 26 feet away with the included remote. The lightweight design weighs in at a mere 31 pounds. Combine this with the attached carrying handle and eyebolts for easy mobility, mounting and installation. The WEN Air Filtration System collects and releases the air in your workshop after filtering it through both a 5-micron outer filter and a 1-micron inner filter. Easily switch between three speeds of 300, 350 and 400 cfm depending on what the situation calls for. With the time feature, you don't even have to worry about turning off your machine. Simply set the timer and the machine will turn off on its own once the time runs out, allowing you to easily give your workshop a thorough cleanse at the end of a day of woodworking without having to be present. And because this is a WEN Product, your 3-Speed Remote-Controlled Air Filtration System is backed by a two-year warranty, a helpful customer service phone line, and a nationwide network of experienced technicians. Remember when you could breathe easy in your workshop? Remember WEN.2. REMOTE DUST COLLECTOR SWITCH
3. PSI Woodworking LR110-3 110-Volt Long Ranger Dust Collector Switch
Feature
PSI Woodworking Long Ranger dust collector switch with 110-volt, 1-1/2-horspower engine and 20-amp relay receiverTurn on a dust collector from anywhere in the shop
Uses R.F. signal, which is not affected by outside interference by large television transformers, electrical noise, or three-phase power sources
Includes a circuit breaker in the receiver and a 5-foot power cord
Ships at 1.84-pounds
Description
PSI Woodworking LR110-3 110-Volt Long Ranger Dust Collector Switch ;from#arikando104. SHOP FOX W1685 1.5-Horsepower 1,280 CFM Dust Collector
Feature
Powder coated paintBag volume: 5.4 cubic feet
Static pressure: 10.1-Inch
Air suction capacity: Approximately 1,280 CFM
Standard bag filtration: 2.5 Microns
Description
A powerful dust collector from Shop Fox. This unit features an extra heavy-duty 12" steel impeller and a 1-1/2 HP motor that runs on 110V. For wood dust only. Features 2.5 micron filtration.5. Dust Collector Remote Control System for 220V Dust Collectors
Feature
Power up your system from up to 50 feet away!Remote also works through walls and is small enought to fit into your pocket.
Power up from most anywhere in your shop!
Operates dust collectors up to 3 HP
Maximum Amperage: 15 with 5 1/2' cord
Description
You're getting ready to make a cut on your table saw and you forgot to turn on the dust collector and course the dust collector is on the other side of the room. This remote control is the perfect solution for powering up your system from up to 50 feet away! The remote also works through walls and is small enought to fit into your pocket. Simply plug the base unit into a standard wall outlet, then plug your dust collector into the base unit, power on the base unit and your dust collector, push the power button on the remote. Now you can power up from most anywhere in your shop!6. Wireless Remote Control Outlet, Fosmon Outdoor Electrical Outlet Switch Weatherproof Heavy Duty, 3-Prong Plug-in ETL Listed (Battery Included)
Feature
[GREAT FOR LIGHTING] Remotely turn your indoor and outdoor lighting ON/OFF[CONVENIENT] Conveniently turn your outside lights on from indoors or turn hard to reach places on with a click of a remote.
[WEATHER RESISTANT] Durable, weather resistant construction for outdoor use
[MULTIPLE USES] TV's, lighting, heaters, sprinkler systems, terrariums, aquariums, humidifiers
[LIMITED LIFETIME WARRANTY] Includes a Limited Lifetime Warranty
Description
Convenient and Great for LightingRemotely turn your indoor and outdoor lighting ON/OFF anytime with Fosmon's wireless remote control outlet. It is ideal for seasonal lights and lamps. Conveniently turn your outside lights on from indoors or in your car with its 30 meter (98 foot) range.
Overcome Hard to Reach Outlets
Great for turning devices ON/OFF in hard to reach places. Perfect for the elderly and those with limited mobility and back pain.
Grounded and Weather Resistant
Durable, weather resistant construction for outdoor applications with a grounded 3 prong AC plug that plugs into any standard outlet.
Compact Remote
Fits comfortably in your pocket, purse, and glove box or on your key chain.
Multiple Uses
Great for TVs, lighting, heaters, sprinkler systems, terrariums, aquariums, humidifiers and more.
Simple
Simplistic design with an ON/OFF button for ease of use. Quick installation with no additional tools needed.
Limited Lifetime Warranty
This Fosmon product includes a limited lifetime warranty. Please visit Fosmon's website for more details.
Please note:
If using outdoors, be sure to plug into GFCI approved outlet, and hang with outlet hanging down. This will prevent moisture from penetrating into the plug.
Multiple plug in outlets (receiver) can be paired to one remote but multiple remotes cannot be paired to one outlet.
Specifications:
Max Range in Open Area - 30 meters / 98.4ft
Includes CR2032 Battery for IR Remote
For Outdoor and Indoor Use
Single 125VAC outlet - 15A Max
125VAC,60HZ,15A,Resistive
125VAC,60HZ,15A, General purpose
125VAC,60HZ,10A / 1250W,Tungsten
125VAC,60HZ,3/4HP TV-5
Fixed Transmitter and Receiver Code
Frequency: 433.92MHz
ETL Listed
Package Includes
Outlet Receiver x1
Outlet Remote x1
7. PSI Woodworking Long Ranger -III Remote
Feature
Extra remote handpiece for Long Ranger 3Turn on a dust collector from anywhere in the shop
Uses R.F. signal
Grounded with reset button
Programmable
8. Dust Collector Remote Control System for 110V Dust Collectors
Feature
Power up your system from up to 50 feet away!Remote also works through walls and is small enought to fit into your pocket.
Power up from most anywhere in your shop!
Operates dust collectors up to 1 HP
Maximum Amperage: 15 with 5 1/2' cord
Description
You're getting ready to make a cut on your table saw and you forgot to turn on the dust collector and course the dust collector is on the other side of the room. This remote control is the perfect solution for powering up your system from up to 50 feet away! The remote also works through walls and is small enought to fit into your pocket. Simply plug the base unit into a standard wall outlet, then plug your dust collector into the base unit, power on the base unit and your dust collector, push the power button on the remote. Now you can power up from most anywhere in your shop!9. POWERTEC 70136 4-Inch to 2-1/2-Inch Cone Reducer
Feature
Connect 4" ID flexible dust collection hose to 2-1/2" ID flexible dust collection hose4" nominal OD end measures 3-61/64" OD and 3-41/64" ID; 2-1/2" nominal OD end measures 2-15/32" OD and 2-9/32" ID
Adaptable to most shop vacuum cleaner hoses with 2-1/4" OD connectors
Use Powertec 70149, Dust Control Flex Cuff (sold separately) to connect 4" nominal OD end to other 4" OD adapters; Use Powertec 70148, Dust Control Flex Cuff (sold separately) to connect 2-1/2" nominal OD end to other 2-1/2" OD adapters
Tough durable ABS plastic
Description
The POWERTEC 4-Inch to 2-1/2-Inch Cone Reducer allows you to connect 4-Inch port to a 2-1/2-Inch hose or a 2-1/2-Inch port to a 4-Inch hose. The 2-1/2-Inch opening also allows you to fit Shop-Vac, Sears and a variety of other wet/dry vacuum cleaners. Simple to install, use and uninstall for the utmost in ease, performance and reliability.10. REMOTE REPLACEMENT FOR 43959
