Finding your suitable hole cutter for recessed lights is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best hole cutter for recessed lights including detail information and customer reviews. Let’s find out which is your favorite one.
Best hole cutter for recessed lights
1. HolePro T-200 1-5/8" to 8" TWIN BLADE Adjustable Hole Saw Cutter for Recessed Lights Speakers. HSS Blades use Drill Power of a Hole Saw to Cut Sheetrock Plastic Soft-woods NO PLYWOOD/PLASTER
Feature
Replaceable HSS Blades SKU HP1183 ASIN B07GY3Z25PTwin blades for perfect balance - no bars to change or threads to break off
Ball bearing mounted strong ABS shield with soft silicon gasket dust seal
11" OD Shield - Cuts perfect holes from 1-5/8" to 8" - replacing hole saw kits with multiple saws
Max cut depth: 1": cuts sheetrock, wood (NO PLYWOOD or PLASTER), melamine, acrylic sheet, soft acoustic tile, plastics
Description
Replaceable HSS bladesDRILL NOT INCLUDED, NOT FOR PLASTER, OR ENGINEERED WOODS SUCH AS PLYWOOD OR OSB OR MDF
Great for DIYer cutting holes in soft sheetrock for recessed light cans and speakers.
Adjustable hole cutter with tough ball bearing mounted ABS shield with silicon gasket dust seal
.
High speed steel blades cut through sheetrock and have a thin kerf profile to cut through wood, plastics, and delicate acoustic tile.
Requires only a hand drill with a 3/8" or larger chuck to cut holes from 1-5/8 inches to 8 inches in diameter and materials up to 1 inch thick. Infinite adjustment and measure bar is marked in inches
.
Make sure to measure the CUTOUT for the product (speaker, recessed light)
.
INSTRUCTIONS: Put one blade holder at "6" and the same with the opposite blade holder and the tool cuts a 6" diameter hole. Shield catches all the shavings and dust and holds the cut section. Does away with the mess and need for drop cloths.
ABS shield remains in place and the internal bearing allows the adjustable hole cutter to spin independent of the shield
.
Orange knob makes it simple to limit the cutting depth to reduce risk of cutting wires and pipes behind the sheetrock or paneling
.
Unlike single blade adjustable hole cutters there are no balance bars to change and nothing to break off and make the tool useless
.
No wobble as with single blade hole cutters so holes are perfectly round even when cut into soft sheetrock.
.
NOT FOR USE IN DRILL PRESS you are installing
.
The size of the product you are installing uses a larger cutout, and the needed size is different by manufacturer of the canned light or the speaker. As with any new tool, always test on a scrap piece of material to get familiar with the tool.
2. QWORK 1-5/8" to 8" (40-200mm) Adjustable Hole Cutter Hole Saw for Recessed Lights Ceiling Speakers Vent holes on Sheetrock Drywall Plaster Ceiling Tile Soft Acoustic Tile Plastics Wood and Plywood
Feature
1) Adjustable twin blade hole cutter for cutting 1-5/8" to 8" (40 - 200mm) holes in ceilings, walls and floors, Cutting depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides2) This kit includes one professional grade adjustable hole cutter with two replaceable pilot drill bits (1x auger type Self-Feed pilot bit + 1x HSS pilot bit), two sets of replaceable cutting blades (1 set of high speed steel blades + 1 set of tungsten carbide blades), one ABS dust shield, one adjustment hex wrench, 5 Pcs brad-point wood drill bits and 5 Pcs Masonry drill bits 5/32", 3/16", 1/4", 5/16, 3/8", one carpenter pencil, one 2m tape measure and a durable storage case
3) Two blades counter balance the cutter for low vibration. 2 sets of user replaceable blades: High Speed Steel blades for wood, plastics, acoustic tile, laminates, rubber; Tungsten Carbide blades for Sheetrock, drywall, plaster, Hardi board, fiberglass, chipboard, plywood, MDF
4) Ball bearing mounted ABS dust shield with soft silicon rubber gasket to trap the dust and shavings to prevent them from going airborne and making mess in your furnished home. It is also safe to use as protection equipment for hole cutting application
5) One hole cutter kit replaces of dozens of hole saws for faster, safer, easier cutting of exactly the hole size needed. It is a very practical tool set for carpenters, home decorators, contractors, professionals and DIY home owners for recessed lights, ceiling speakers, vent holes and other hole cutting application
Description
Adjustable hole cutter kit
Cutting hole diameter: 1-5/8" to 8" (40mm - 200mm)
Cutting depth: up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides
Shank: 3-flat shank
Infinite adjustment and measure bar is marked in inches and metric system
Used for recessed lights and ceiling speakers installation hole cutting, skylights, vent holes cutting
Application materials: Sheetrock, Drywall, Plaster, Ceiling Tile, Soft Acoustic Tile, Plastics, Fiberglass, Acrylic Sheet, Soft Wood and Plywood
User Instruction
It requires a hand drill with a 3/8"(10mm) or larger chuck to cut holes from 1-5/8"(40mm) to 8"(200mm) in diameter and materials up to 3/4"(19mm) thick from one side, 1-1/8"(30mm) thick from two sides
Caution
* When cutting into walls, floors or ceilings, always check to ensure that no electric cables or water pipes etc are in the vicinity of the proposed cut
* Always keep the cutting blades sharp
* Do not use undue force, or too great a drill speed, suggested cutting speeds
Hole Diameter(mm) Drill Speed(RPM)
40 - 49 --------------- 800
50 - 69 --------------- 600
70 - 89 --------------- 400
90 - 119 -------------- 200
120 -180 -------------- 100
* Ensure the cutting blade holders are tight before use
* Make sure to measure the CUTOUT for the product (speaker, recessed light) you are installing. The size of the product you are installing uses a larger cutout, and the needed size is different by manufacturer of the canned light or the speaker
* Screw the wing nut on to the threaded end of the spindle so that that assembly is secure
* As with any new tool, always test on a scrap piece of material to get familiar with the tool
3. Hole Pro X-230+ 1-7/8" to 9-1/4" TWIN BLADE Pro Hole Saw Cutter Electricians Installing Recessed Lights: Cuts Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie
Feature
TWIN BLADES for balance - NO BALANCE BARS to BREAK and finer kerf than with SINGLE Blade modelsCUT HOLE 1-7/8" to 9-1/4" in ceilings, walls, floors - Cut Depth control
UNIQUE 5/8" threaded shaft tip to QUICKLY MOUNT CARBIDE GRIT holes saws
Sturdy Carry Case and replaceable blades: Cut plywood, sheetrock, plaster, veneers, cement board, ceiling tiles, T&G
LIFE TIME warranty see details under IMPORTANT Information section
Description
ADJUSTABLE TWIN BLADE hole cutter kitwith infinite adjustment 1-7/8" to 9-1/4" for faster cutting for recessed lights, ceiling speakers, ducts with perfect balance
One hole saw kit replaces dozens of hole saws for faster, safer, easier cutting of exactly the hole size needed.
Tough 11-1/4" OD ABS Shield - Needs 1/2" drill chuck - Take a quarter the power of hole saws so bigger holes easily cut
High Speed Steel and Tungsten Carbide Blades with 1-1/8" cutting depth replaced in seconds
Cutting depth 1-1/8" from a side, 2-1/4" if can be cut from two sides
NO NEED for BALANCE BARS as with SINGLE BLADE models that can break off
INCLUDES
-Pro grade adjustable hole cutter
-Ball bearing mounted ABS shield with soft silicon rubber gasket to trap all dust and shavings
-Sturdy Carry Case
-Replaceable blades and Pilot Bit
- narrow kerf High Speed Steel for wood, plastics, acoustic tile, tongue & groove, laminates, rubber and Tungsten Carbide blades for drywall, plaster, Hardi board, fiberglass, chipboard, OSB, plywood, MDF
-hex wrenches
The depth control knob helps to avoid accidental cutting of wires or pipes in walls or ceilings.
Vacuum adapter (HP1174 -- NOT INCLUDED) available for connecting shop vac where asbestos or lead paint exists
Cut holes in plywood up to 8" in diameter with 18 volt cordless drill
INCLUDES NEW 5/8" threaded shaft end for using the hole cutter with standard carbide grit holes saws up to 1-1/4 inch cutting depth with the same dust and depth control as the adjustable hole cutter
Do NOT USE with STUD DRILLS
NOT MADE FOR USE WITHOUT PILOT BIT
does NOT include additional hole saw or vacuum adapter
Use Hole Saws to 2-1/4 deep & to 9" diameter with shield and HP1168 Arbor Adapter kit
4. Klein Tools 53731 Hole Saw, Adjustable Saw Cutter with Dust Shiled for Cutting Drywall and Ceiling Tile for Recessed Lights
Feature
Cuts 2-1/2-Inch to 7-Inch holes in drywall and ceiling tileBlades are carbide-coated for longer blade life
Dust shield included
Range: 2-1/2-Inch-7-Inch
Weight: 1.0-Pound
Description
The Klein 53731 Quick Cutter Adjustable Hole Saw cuts 2-1/2-Inch to 7-Inch holes in drywall and ceiling tile. The blades are carbide-coated for longer blade life. Dust shield included. Quick Cutter is a registered trademark of Spear Tools. Range: 2-1/2-Inch-7-Inch. Weight: 1.0-Pound.5. EZ HOLE Professional Hole Saw Cutter with Full
Feature
FULL LIFETIME WARRANTY - The last hole cutter you'll ever need to buy.CUTS HOLES WITH EASE - Ideal for plywood, drywall, plaster, backer board, etc.
HEAVY DUTY - Carbide cutting blade, all metal jig, sealed ball bearings, and an ABS dust shield
COSTS LESS - This kit can replace an entire hole saw set from 1-3/16" to 8-5/8" for much less
REPLACEABLE BLADE - Inexpensive tungsten carbide replacement blades readily available
Description
This Hole Saw Kit Makes it EasyJust set the cutter to the correct size and attach it to a drill. It will cut a clean hole while trapping all of the dust and debris inside its plastic shield.
A Complete Kit
Each kit includes an all steel hole cutter, specially designed dust shield with full ball bearings, extra blade for various surfaces, adjustment wrenches, and a durable storage case. The saw is fully adjustable from 1-3/16" to 8-5/8" and cuts up to 7/8" deep on one side or 1-3/4" deep from both sides.
Eliminate the Dust and Mess
Drywall and plaster dust can be a nightmare to control, especially when working inside a furnished home. Dust and debris is captured inside the hole cutter's transparent cowl rather than going airborne and making mess.
Replaceable Blade
Inexpensive replacement blades are readily available and can be changed in seconds.
Full Lifetime Warranty
Only the cutter blade and pilot bit are not included in lifetime warranty but are fully replaceable after normal wear.
6. Blue Boar Recessed Light Carbide Grit Hole Saw 4-3/8 dia for 4 inch lights: fast cutting in drywall, lath & plaster, Hardi board: easy plug removal uses standard 5/8 18 thread hole saw arbor adptr
Feature
1" deep - Hard tungsten carbide grit edge for a long life in abrasive materialsContinuous cutting edge for smooth cutting even in wood lath and plaster
Cuts through drywall, plaster, CornHole board, fiber cement Hardie board, stucco, acoustical tile, ceiling tile
Attaches to standard 5/8"-18 2-pin mount hole saw arbor and works with Hole Pro XL-Arbor/Shield Kit or Hole Pro X-230+ model
Open back design for faster cut plug removal
Description
***HOLE SAW ONLY -- does NOT INCLUDE Pilot Bit, Arbor or Shield ***** Blue Boar Tungsten Carbide Grit Recessed Lighting Hole Saw 4-3/8" is perfect for installing most 4-inch recessed light cans in ceilings and soffits. CONFIRM the actual cutout size of your recessed lights as all 4" lights can vary by manufacturer. The hole saw has a hard tungsten Carbide grit that provides longer life in tough, abrasive materials. Continuous cutting edge provides a smooth cut and does not catch on wood or metal lath and plaster. The open back design makes it fast and easy to remove the cut plug and start the next cutting the next hole. This hole saw works perfectly with recessed lights (incandescent, halogen, and LED) made by Capri, Halo, Juno, Marco, Lithonia, Progress, Lightolier, Pathway & Thomas, and others light cans that require a 4-3/8" opening. The 1-inch cutting depth will cut through the thickest drywall, stucco, and plaster, and provides clearance so the carbide grit hole saw can also be used with Hole Pro X-230+ hole cutters for 100% dust containment of the drywall dust or when dealing with lead paint or asbestos and needing to use a HEPA vacuum. The Blue Boar tungsten carbide grit recessed light hole saw can also be used with the Hole Pro XL Shield & Arbor adapter kit (HP1168-71) or Hole Pro X-230+ Adjustable Hole Cutter (HP1180) for 100% dust containment and cutting depth control. Attaches to standard hole saw arbor adapters made for 1-3/8" and larger hole saws including the Blue Boar Heavy Duty 7/16" shank dual arbor and mandrel kit HP15977. NstallMates Multi Size Hole Cutter with Dust Bowl
Feature
Everything you need to start cutting holes - just add your power drill!High-speed steel blade is capable of cutting sheetrock, plywood, and acrylic with ease | Tungsten carbide tipped blade can cut metal up to 3/64" thick
Includes blades, drill bit, hex wrench, spanner wrench & dust bowl - all in a handy carrying case!
Dust bowl encompasses the drilling area to catch debris and contain dust
Cut Diameter: From 1-1/4" to 10-1/4"
Description
Did you make a mess during your last in-ceiling speaker installation? Cutting holes in drywall makes dust go everywhere! The Installmates Dust Bowl Hole Cutter is a great solution for this everyday problem. It has adjustable-radius blades to cut various sized holes and a handy plastic bowl to catch the mess. This is one of those must-have tools for every installer! It's guaranteed to make your speaker installations easier.Up to 10-"" Diameter
This blades cutting diameter is freely adjustable from 1-" to 10-". This gives you ultimate versatility in your cuts replacing several hole saws that still won't give you the precise cutting of this tool.
High-Speed Steel Blade
This blade will most likely be your go-to blade. It cuts sheetrock, plywood, and acrylic with ease.
Tungsten Blade
You might need to cut through a thin piece of metal but you don't want to have to switch tools. Simply attach the tungsten carbide tipped blade to cut metal up to 3/64" thick.
Tools Included
This hole cutter comes with an array of tools and components. It includes blades, drill bit, hex wrench, spanner wrench, and dust bowl, all in a handy carrying case.
Compression Spring
Located on the tool's main shaft, the compression spring absorbs vibrations while cutting. This leaves you with a clean and steady cut.
Large Dust-Catching Bowl
What makes this tool so valuable is the large bowl that catches all the drywall dust. It's a transparent, impact-resistant bowl that prevents chips from flying into your eyes and making a mess while cutting.
Power Drill (Not Included)
This hole cutter simply hooks up to any variable speed drill.
8. Hole Pro LARGE Hole Saw Dust Shield & XL Arbor Kit with Cut Depth Control -use with any 1/2" or 5/8" threaded hole saw up to 2-1/2" deep and 9" diameter
Feature
Hole Pro LARGE XL Shield & XL Arbor kit for hole saws to 2-1/2" deep & 9" diaArbor adjusts for cutting depth control & insures perfect straight cuts
ABS Shield (11-1/4" OD) captures 100% of dust. Adjustable cutting depth control
Work with all 1/2"-20 & 5/8"-18 thread mount holes saws
** Hole Saw NOT INCLUDED
Description
The Hole Pro LARGE XL Shield and XL Arbor kit comes with the following components:1) ABS (11-1/4" OD) transparent shield with ball bearing mount
2) Orange adjustment knob for cutting depth
3) XL Arbor
4) Yellow storage pouch
5) Tensioning spring
6) Release bar to assist with removing the hole saw after use
7) Hex wrench to loosen, tighten, or replace the HSS pilot bit
8) High Speed Steel pilot bit
9) Spacer disk (metal washer) goes on the arbor over the 1/2" - 5/8" threads before threading on the hole saw to enable easier hole saw removal after use
10) Includes plastic plug in shield for use when NOT using Vacuum Adapter
** Hole Saw NOT INCLUDED**
** Vacuum Adapter NOT INCLUDED**
9. Hole Pro X-305 Pro Twin Blade Hole Saw Kit: Adjusts to cut all size holes between 1-7/8" to 12" Cuts Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie: Includes Tungsten Carbide & HSS blades
Feature
Twin blades for faster/smoother cutting, strong shield traps 100% dust & control cutting depthUser replaceable High Speed Steel and Tungsten Carbide Blades with 1-1/8" cutting depth
Cuts plywood, sheetrock, veneer, cement board, slate, ceiling tiles, etc.
14" OD - Adjusts infinitely for holes 2" to 12", Shield turns drill into portable drill press to use anywhere
Complete kit - add your 1/2" drill chuck - Needs power of hole saws so bigger holes easily cut
