If you looking for ninja personal blender blade replacement then you are right place. We are searching for the best ninja personal blender blade replacement on the market and analyze these products to provide you the best choice.
Best ninja personal blender blade replacement
1. NutriBullet NBR-1201 12-Piece High-Speed Blender/Mixer System, Gray (600 Watts)
Feature
Effortlessly pulverizes fruits, vegetables, and superfoods for nutritious protein shakes and green smoothiesHigh-torque power base and 600-watt motor
Powerful, patented stainless steel blade design with cyclonic action
Includes power base, 1 tall cup, 2 short cups, 1 flat blade, 1 emulsifying blade, 2 re-sealable lids, pocket nutritionist and manual with recipes
Includes 1-year warranty and access to hundreds of smoothie recipes
NOTE: Refer the User Manual before use
Description
The Nutri Bullet NBR-12 12-Piece Hi-Speed Blender/Mixer System by Magic Bullet is portable, safe for kids, easy to use and effortlessly pulverizes fruits, vegetables, superfoods and protein shakes into a delicious, smooth texture. The Nutri-Bullet's power, patented blade design and cyclonic action combine to extract all of the nutrients from your food helping you to achieve the healthiest lifestyle possible today. To get the most out of your life, you need to get the most out of your food. This product is manufactured in compliance with US & Canadian Electrical Standards This product should not be used with any type of Adapter or Voltage converter device, nor should it be used outside of the United States or Canada. Use of Adapters and Converters is considered an unauthorized modification of the product and as such will void the warranty2. NLSD Replacement Parts for Nutri Ninja Blender Blade Assembly Fits Nutri Ninja BL660 BL770 BL740 BL771 BL772 BL773CO (6 Fins)
Feature
BEFORE PURCHASING please check your existing blade for the following 1) Count the FINS IT SHOULD BE 6-FINS. 2) The blade has MALE FINS. 3) 3.35" (8.5cm) Diameter.6 fins blade fits for Ninja BL770, BL771, BL772, BL773CO ,BL780, BL660, BL740
Made of Food Grade BPA Free Plastic and Stainless Steel, Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
GOOD REPLACEMENT:It's non-original aftermarket part but exactly fit for Nutri Ninja Blender
Description
Please check carefully for the model that fit for before buying. Fits for Nutri Ninja Ninja BL770, BL771, BL772, BL773CO ,BL780, BL660, BL740 .Warranty Policy All products sold by NLSD are covered by 3 months warranty. NLSD endeavours to provide customer with new replacement for any product within 15 days from the date of purchase. If a customer received a product which is faulty or damaded on arrival, please notify us within 15 days. Beyond 15 days, NLSD will provide customer a refund, exchange or repair the product.
3. NLSD Replacement Parts Blender Blade Assembly Fits Nutri Ninja Auto-iQ BL480-30 BL681A-30 BL682 BL640, Black
Feature
BEFORE PURCHASING please check your existing blade for the following 1) Count the FINS IT SHOULD BE 7-FINS. 2) The blade has MALE FINS 3) 4" (10cm) Diameter.7 fins blade fits for model # end with 30: fits for 1000w/1100w Nutri Ninja Auto iQ BL480-30, BL481-30,BL681A-30,483-30,BL486CO-30; fits for 900w BL450-70,BL451-70,BL454-70.
7 fins blade fits for All models: BL487,BL487,BL488W,BL490,BL491,BL492W,BL492,BL640,BL641,BL642,BL642W,BL642Z,BL680,BL680A,BL682
NOT FIT BL66x,BL77x,BL8xx, NOT FIT model # end with 70 (not fit for BL450-70,BL451-70,BL454-70,BL480-70,BL484-70)BL481-70,BL482-70,BL483-70,)
Made of Food Grade BPA Free Plastic and Stainless Steel, Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
Description
Please check carefully for the model that fit for before buying. Fits for Nutri Ninja Auto iQ BL480, BL480D, BL481-30, BL681A-30, BL2012, BL2013, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Only fit for 18oz, 24oz, 32oz not fit for 16oz) NOT FIT for: 6 pins, model# end with 70, BL6XX, BL7XX, BL8XX, NJXX NOT FIT For: BL620C, BL660, BL663, BL682, BL201, BL610, NJ600, BL740, BL772, BL771, BL770, BL682, BL830, BL780, BL810 BL820 BL830 Warranty Policy All products sold by NLSD are covered by 3 months warranty. NLSD endeavours to provide customer with new replacement for any product within 15 days from the date of purchase. If a customer received a product which is faulty or damaded on arrival, please notify us within 15 days. Beyond 15 days, NLSD will provide customer a refund, exchange or repair the product.4. Ninja Blender Replacement Parts, Ninja Bottom Blade 7 Fins for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ 7 Fins Blade Assembly (Black) (Black)
Feature
Ninja Replacement Blade --7 Fins, 4"/10CM diameter, 165g, made of food grade PP and stainless steel (Should you have any question about this item, feel free to contact us! ) Packing include: 1x 7 Fins Bottom Blade Assembly, 1 x Replacement Gasket RubberBL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing)
Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade
Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you're going to use this replacement gasket
Note3: Be careful of the blade when open the package
Description
KIND REMINDER BEFORE PURCHASE:1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can't fit all the 7 fins blender's motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don't purchase it
2: Your blender model must be identical with our stated model."ONLY COMPATABLE WITH" 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it's loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage
4. Do not overfill! To avoid spilling, do not add ingredients past the "Max" fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
5. ELEFOCUS Replacement Parts for Nutri Ninja Blender, 2 Pack 16-ounce Single Serve Cup and Sip N Seal Lid Fit for Ultima & Professional for Ninja Series BL770 BL780 BL660 All Pro 4 Tab Blenders
Feature
Cup Set Replacement part for ninja : Two clear cups with lidsReplacement part boxes for ninja-These are Not store
These cups fit these model number blenders. (The model number is located underneath the base of the blender and must start with a BL) : BL660 (1100 watt), BL663 (1100 watt), BL740, BL770 BL771 BL772 (1500 watt), BL780 (1200 watt), BL810 BL820 BL830
Do not order if you are not sure...some smaller for Ninja blenders (Pulse) have 3 tabs and A Ninja Blender that did not originally come with single serve cups will not work with single serve cupsreturns or liquidation items
Single Serve 16 ounce cups with FOUR TABS.
Description
Single Serve Cup Set-Replacement part for Ninja Ultima Blender Model # BL810, BL820 BL830 and is a clear cup with a slight smoke or gray tint -Also for Ninja BL770 / BL771 / BL772 | Ninja BL780 BL730 | BL740 BL660 and BL663.PLEASE NOTE: These sets NOT FIT Auto-iQ Series blenders or some smaller Ninja blenders have 3 tabs, NOT FIT For Nutri Ninja 2-1 QB300 QB3000SSW QB3004 QB3005
6. BLEND PRO Replacement Nutri Ninja 24 oz Cup with Sip & Seal Lid - For Blender BL450 BL454 Auto-iQ BL480 BL481 BL482 BL687 (2-Pack)
Feature
Nutri Ninja 24 oz Cup with Sip & Seal Lidcompatible with Nutri Ninja BL480 BL490 BL640 BL680 Auto IQ Series blenders
All components are BPA free and dishwasher safe
100 satisfaction guaranteed or your money back
Description
Nutri Ninja 24 oz Cup with Sip & Seal Lid 2-PACK7. Nutri Ninja 32oz Cup and 7-Fin Blade Replacement Set - Large Accessory Part Compatible with Auto IQ and Duo Blenders (1, 32oz Cup & Blade)
Feature
COMPATIBLE NINJA MODELS : BL2012, BL2013, BL480, BL480D, BL481, BL482, BL486CO, BL487, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680, BL680A, BL682, CT640C, CT641, CT680, CT680A, CT680SS, CT680W, CT682SP, NN100, NN100A, NN101, NN102, NN210High Quality BPA Free Plastic , X-Large 32 ounce Replacement Cup Accessory/Dishwasher Safe - top rack only
Blade is made of stainless steel. Never needs sharpening.
Perfect for chopping, grating and blending. Helps make healthy cooking easier.
DO NOT USE WITH HOT COFFEE OR HOT LIQUIDS OF ANY KIND
Description
Cup and blender base combo are perfect replacement parts for your Auto IQ and Duo Blenders.8. Replacement Parts Ninja Bottom suitable for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (Black)
Feature
Ninja Blade Apply to BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012,Please confirm your blender need 7 fins replacement blade before purchasingNinja Replacement Blade --7 Fins, 4"/10CM diameter, 165g, made of food grade PP and stainless steel (Should you have any question about this item, feel free to contact us! )
Easy installation -It can be well loaded and easily removed. Just replace your bad blade and juicer can be reused.
Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade
Note2: Be careful of the blade when open the package
Description
Color:Blade 7 Fins
Description:
Item Type: Ninja Blender Replacement Parts for blender
Blade material: stainless steel
Blade shape: Cross blade
This Ninja Blender Accessories Suit for:
BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
Not fit for :
BL660,BL663,BL740,BL770,BL771,BL773CO,BL780,BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
NOTE:
Two conditions must be met at the same time before purchase:
1: Your original motor base must be 7 fins;
2: Your blender model must identity with our stated model.
The Nutra Ninja Replacement Blade can't fit all the 7 fins blender's motor base:
There are too many models of ninja blender blade, if any character is difference, please don't purchase it.
Note: You are recommended to replace your ninja blender every 6 months or as needed for optimal performance.
Pay attention to before use :
Please check whether the gear of the bottom loosen or tighten before use. If it's loosen, please tighten it.
Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding a leak)
Do not overfill! To avoid spilling, do not add ingredients past the Max fill line.
Place the replacement blade onto the cup and screw it tightly until you have a good seal.
Please make sure it in right place and locked tightly.
Do not run your blender over 4 minutes at a time to prevent overheating of the blender.
Packing including:
1 x Ninja blade Replacement
9. BLEND PRO Replacement For Ninja 16 Oz Cup Single Serve - For Nutri Ninja BL770 BL780 BL660 Blender (2-Pack)
Feature
BLEND-PRO Replacenent Cup For Nutri Ninja 16 oz Cups with LidCompatible with Nutri Ninja BL660 BL740 BL770 BL810 BL820 Blenders
ONE YEAR MANUFACTURER WARRANTY
!! BE AWARE !! only seller BLEND PRO sells GENUINE BLEND PRO PARTS covered by WARRANTY
Description
Replacenent Cup For Nutri Ninja 16 oz Cup with Sip Seal Lid for BL660 BL660W BL740 BL770 BL810 BL820 Blender 2-Pack BY BLEND PRO10. Replacement Extractor Blade 7 Fin For Nutri Ninja 1000W Auto iQ BL682 BL642 BL641 Blender
Feature
nt part for Nutri Ninja Blender, make your Juicer reuse again and perfect for all your blending and mixing needs.BPA Free, Effortlessly pulverizes fruits, vegetables, superfoods and protein shakes into a delicious, smooth texture.
Fits for BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30
Please check your existing blade by counting the fins before purchase. It Should Be 7fin
