Finding your suitable polypropylene epoxy is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best polypropylene epoxy including detail information and customer reviews. Let’s find out which is your favorite one.
Best polypropylene epoxy
1. Permatex 84145 Permapoxy Black Plastic Weld - 0.84 fl. oz.
Feature
Structural adhesive designed for general purpose bonding of a wide variety of materialsForms a tough, durable bond with a permanent strength up to 3500 PSI
Fast-curing product sets in five minutes at room temperature
Bonds most plastics, composites, ceramics, and wood in any combination
Gap filling to 0.125 inches
Description
Permatex's Permapoxy Black Plastic Weld is a structural adhesive designed for general purpose bonding of a wide variety of materials. Black Plastic Weld forms a tough, durable bond to most plastics, composites, ceramics, and wood in any combination. It is a fast-curing product with gelling of mixed adhesive in 5 to 6 minutes and fixturing in 9 to 10 minutes. Bonds hard and soft plastics to specified surfaces, and requires no primers. Sets in five minutes at room temperature, with a temperature range of -60 degrees Fahrenheit to 250 degrees Fahrenheit (-51C to 121C). Permanent strength up to 3500 PSI, and gap filling to 0.125 inches. This epoxy is water resistant, with good chemical resistance. Suggested Applications: Bonds rigid materials including ABS, acrylic, fiberglass, FRP, glass, PVC, SMC, steel, styrene, vinyl, and wood. NOTE: Permatex Black Plastic Weld will not bond polyethylene and polypropylene plastics.2. J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe - Dries Tan - 25 ml
Feature
Tan drying two-part urethane adhesive sets in 15 minutes and cures in 30 minutesGreat for filling dents, bumpers, trim, polypropylene and polyethylene plastics, fiberglass and more
Tensile strength of 3770 PSI for a strong, permanent bond
No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out
J-B Weld is proudly made in the USA
Description
J-B Weld Plastic Bonder SyringePlastic Bonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. Plastic Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, Plastic Bonder sets to a tan color and cures to a hard, permanent bond.
Use on:
Instructions
1. Prepare: Clean surface area of dirt, grease, oil, paint, or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.
2. Mix: After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.
3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
4. Dry: Sets in 15 minutes. Cures in 30 minutes. If temperature is below 40 degrees Fahrenheit, then set time is longer.
J-B Weld is proudly made in the USA
3. J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Dries Black - 25 ml
Feature
Black drying two-part body panel adhesive and gap filler sets in 15 minutes and cures in 30 minutesGreat for filling gaps, plastic to metal and plastic to plastic bonding
Tensile strength of 3770 PSI for a strong, permanent bond
No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out
J-B Weld is proudly made in the USA
Description
J-B Weld Black Plastic Bonder SyringePlastic Bonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete and more. Plastic Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, Plastic Bonder sets black in color and cures to a hard, permanent bond.
Use on:
Instructions
1. Prepare: Clean surface area of dirt, grease, oil, paint, rust, etc.
2. Mix: After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.
3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
4. Dry: Sets in 15 minutes. Cures in 30 minutes. If temperature is below 40 degrees Fahrenheit, then set time is longer.
J-B Weld is proudly made in the USA
4. Plastic Glue - Acrylic Repair, Auto Body Filler and Bumper Repair Kit - Bonding Adhesive for Radiators, Headlights, Most Plastics, Metal, Glass, Fiberglass and More
Feature
GET FASTER AND STRONGER BONDING WITH THIS DUAL ADHESIVE REPAIR KIT AND AS A PLASTIC BODY GAP, CRACK OR HOLE FILLER. It can be used on most plastics (including abs), resin, ceramic, fiberglass, metals, rubber, concrete and glass. Specific items include automotive rubber trim, plastic bumpers, auto emblems, wheel caps, carburetors, headlights, tabs as well as home improvements such as electrical switches, tubs, showers, pool pump valves, household appliances, toys, modeling and much moreFOR BEST RESULTS, USE ON A HORIZONTAL SURFACE. MORE SUPER GLUE THAN MOST OTHER KITS: The kit includes 20ml Adhesive (Special Grade Super Glue) and 15ml each filling powder in black and white which can be mixed to create gray. It can be used either as a two part kit or single acrylic adhesive
STRONG HEAVY DUTY ADHESIVE: It can be sanded, filed, drilled, tapped, painted and is heat resistant up to approximately 194 degrees Fahrenheit (90 Celsius). Great for use on car plastic and for front or rear bumper or fender, dashboard/dash, gas/fuel tank, radiator or headlight repairs or restoration on boats, motorcycles, canoes, dinghy, kayak, ATV's
THE ACRYLIC GLUE PART OF THIS KIT IS SUPER GLUE AND QUITE RUNNY IN ORDER TO SATURATE THE POWDER which means it is easy to apply and a suggestion to keep it FRESH FOR A VERY LONG TIME is to keep it in a refrigerator after opening it.
PROVEN TRACK RECORD: Trusted by thousands of happy customers WORLDWIDE SINCE 1948.
Description
Do you need to fix something? (ANYthing?) Automotive trim and parts, plastic, metals, glass, wood, concrete or rubber? TV remotes, shoes, chairs, tools, kitchen appliances?
AND you need it to dry instantly right? Pratley's Powda Bond is your answer.
Benefits:
Powda Bond is:An instant repair, ultra fast curing adhesive kit and gap filler which can be used either as a two part kit or single adhesive.
The repair kit includes: 20ml Adhesive (Special Grade Super Glue) that can be used on its own or with the filling powder(s) and 15ml each filling powder in black and white which can be mixed to create gray if you need that.
It can be sanded, filed, drilled, tapped and painted
It repairs most plastics, metals, rubbers, wood, concrete and even glass.
It fills cracks, gaps and holes.
It can be used on just about any automotive parts like bumpers, wheel caps and carburetors as well as household items like electrical switches, shoes, remotes, toys, tools, pool pump valves etc.
It can be exposed to water once hardened.
It can withstand heat up to 194 degrees Fahrenheit.
Features:
Powda Bond is manufactured by Pratley. The company was established in 1948 and manufactures over 800 products that is sold worldwide to thousands of very happy customers.Powda Bond is considered an Adhesive and Powder Filler Repair Kit.
The surface will begin to harden in approximately 15 seconds after all the liquid has been absorbed.
The adhesive will harden fully after approximately 30 seconds (it will take a bit longer in cold weather though)
Powda Bond will harden to a depth of about 10mm. If thicker sections are needed, you can apply layers one on top of the other.
Powda Bond is set apart from similar products because its penetration is far superior.
5. Technicqll Clear Adhesive Glue For Pp Polypropylene, Pe Polyethylene, Ptfe, Silicone
Feature
1 x ADHESIVE GLUE FOR Polypropylene, Polyethylene, PTFE, Silicone etc (8ml+8g)CLEAR / COLOURLESS HIGH QUALITY SPECIALISTIC PRODUCT
A specialistic adhesive with a ground agent called BASE PRIMER increasing surface energy of plastics
difficult to stick such as: PP (Polypropylene), PE (Polyethylene), PTFE.
It bonds to polyethylene and polypropylene, hot formed elastomers, silicone and related plastics.
Description
A specialistic adhesive with a ground agent called BASE PRIMER increasing surface energy of plastics difficult to stick such as: PP (Polypropylene), PE (Polyethylene), PTFE. This colourless, curing in seconds and close to ideal of the 21st century adhesive is used for strong and durable bonding of all materials having surfaces smooth and porous, stiff and elastic as well as material combinations e.g. PE to steel, PP to stone. It bonds to polyethylene and polypropylene, hot formed elastomers, silicone and related plastics. May be also used for bonding PTFE plastics to all other materials e.g. PE to glass or stone or PVC etc.In the production of the adhesive the latest achievement of supermolecular chemical engineering has been used up. Applying a new generation adhesive allows for obtaining excellent strength parameters and the highest adhesion to polyolefins (PE, PP) coated previous with the base primer. HOW TO USE: Clean and degrease thoroughly the surface to be bonded before applying the base primer. Thanks to a brush added to every bottle of the base primer this agent is applied equally and thoroughly to the surfaces. It is recommended to coat with the primer twice or three times in case of porous and irregular surfaces. The base primer is to be applied only to PP, PE and PTFE surfaces. A minute after applying it the adhesive may be applied to one of the surfaces to be bonded. The antiadhesive hair of the brush allows for application a very thin layer of the adhesive (even 0,15mm). Such a micron film gives a joint of the highest parameters with an equal distribution of adhesion forces during breaking stresses. Please note: You must not to apply the base primer to surfaces which are easy to stick (e.g. PVC) because you obtain the opposite effect from what you intended. The adhesive should be used only for one of the surfaces to be bonded.6. J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe - Dries Translucent Yellow - 25 ml
Feature
Translucent yellow drying epoxy sets in 5 minutes and cures in 1 hourGreat for most hard plastics, ABS, fiberglass, pvc, glass, vinyl and most composites
Tensile strength of 4400 PSI for a strong, permanent bond
No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out
J-B Weld is proudly made in the USA
Description
J-B Weld PlasticWeld SyringePlasticWeld is a specially formulated two-part adhesive and epoxy filler system that provides for strong, lasting repairs. PlasticWeld will bond a variety of surfaces, such as metal, composites, fiberglass and others. PlasticWeld sets in 5 minutes at room temperature and is fully cured in 1 hour. Using a 1:1 mixing ratio, PlasticWeld combines to a tensile strength of 4400 PSI and cures to a translucent yellow color.
Use on:
Instructions
1. Prepare: Clean repair area of dirt, grease, oil, paint, rust, etc.
2. Mix: After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.
3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
4. Dry: Sets in 5 minutes. Cures in 1 hour. If temperature is below 40 degrees Fahrenheit, then set time is longer.
J-B Weld is proudly made in the USA
7. Permatex 84115 5-minute Plastic Weld Adhesive, 0.84 oz.
Feature
Structural adhesive designed for general purpose bonding of a wide variety of materialsForms a tough, durable bond to most plastics, composites, ceramics and wood in any combination
Requires no primers, sets in five minutes at room temperature
Permanent strength up to 3500 PSI
Suggested Applications:Bonds rigid materials including ABS, acrylic, fiberglass, FRP, glass, PVC, SMC, steel, styrene, vinyl, and wood. Use for interior trim, fills cracks, bonds most plastic, bonds plastic to vinyl
Description
Permatex PermaPoxy 5 Minute Plastic Weld is a structural adhesive designed for general purpose bonding of a wide variety of materials. This weld forms a tough, durable bond to most plastics, composites, ceramics and wood in any combination. A fast curing product with gelling of mixed adhesive in 5 6 minutes and fixturing in 9 10 minutes, it bonds hard and soft plastics to specified surfaces. Requires no primers, sets in five minutes at room temperature, with a cream appearance. Gap filling to 0.125 inch, with a permanent strength up to 3500 PSI. Temperature range of -60 degrees Fahrenheit to 250 degrees Fahrenheit, with good chemical resistance and water resistance. NOTE: Will not bond most polyethylene or polypropylene plastics. Permatex offers convenient solutions for a wide range of bonding applications. Available in many packaging configurations, Permatex epoxies are versatile and easy-to-use. From general-purpose to material-specific, Permatex offers a formulation that will work for you.8. Technicqll Clear Adhesive Glue Super Gel For Pp Polypropylene, Pe Polyethylene, Ptfe, Silicone
Feature
1 x ADHESIVE GLUE SUPER GEL FOR Polypropylene, Polyethylene, PTFE, Silicone etc (4ml+4g)CLEAR / COLOURLESS HIGH QUALITY SPECIALISTIC PRODUCT
A specialistic adhesive with a ground agent called BASE PRIMER increasing surface energy of plastics
difficult to stick such as: PP (Polypropylene), PE (Polyethylene), PTFE.
It bonds to polyethylene and polypropylene, hot formed elastomers, silicone and related plastics.
Description
A specialistic adhesive with a ground agent called BASE PRIMER increasing surface energy of plastics difficult to stick such as: PP (Polypropylene), PE (Polyethylene), PTFE. This colourless, curing in seconds and close to ideal of the 21st century adhesive is used for strong and durable bonding of all materials having surfaces smooth and porous, stiff and elastic as well as material combinations e.g. PE to steel, PP to stone. It bonds to polyethylene and polypropylene, hot formed elastomers, silicone and related plastics. May be also used for bonding PTFE plastics to all other materials e.g. PE to glass or stone or PVC etc.In the production of the adhesive the latest achievement of supermolecular chemical engineering has been used up. Applying a new generation adhesive allows for obtaining excellent strength parameters and the highest adhesion to polyolefins (PE, PP) coated previous with the base primer.HOW TO USE:Clean and degrease thoroughly the surface to be bonded before applying the base primer. Thanks to a brush added to every bottle of the base primer this agent is applied equally and thoroughly to the surfaces. It is recommended to coat with the primer twice or three times in case of porous and irregular surfaces. The base primer is to be applied only to PP, PE and PTFE surfaces. A minute after applying it the adhesive may be applied to one of the surfaces to be bonded. The antiadhesive hair of the brush allows for application a very thin layer of the adhesive (even 0,15mm). Such a micron film gives a joint of the highest parameters with an equal distribution of adhesion forces during breaking stresses.Please note: You must not to apply the base primer to surfaces which are easy to stick (e.g. PVC) because you obtain the opposite effect from what you intended. The adhesive should be used only for one of the surfaces to be bonded.9. Devcon 30350 Super Glue for Plastic (2G), 0.07 oz.
Feature
Fast-setting, semi-thick adhesiveCreates a flexible bond
Works on most polyethylene and polypropylene plastics
Ideal for use on porous materials such as foam rubber, cloth or wood
High tensile strength (3,200 psi)
Description
A fast-setting, semi-thick adhesive that is excellent for bonding plastic and elastic surfaces. Stays flexible. Ideal for use on porous materials such as foam rubber, cloth or wood.10. Bondo 280 Epoxy Bumper Repair Syringe Kit - 0.34 fl. oz.
Feature
This product is easy to use.This product is highly durable
This product is manufactured in China
Durable yet flexible for automotive plastic panel repair
2-part epoxy adhesive dispenses evenly from syringe container with no premixing required
Very versatile - makes permanent repairs as an adhesive or filler
Creates fully sandable and paintable surface
Kit contains plastic spreader and reinforced mesh for fast, easy repairs
