Finding the best frs springs suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best frs springs
1. Genuine Toyota (PTR07-18130) Lowering Spring
Feature
Quicker turn-inEnhanced cornering and steering response
TRD-developed proprietary spring rates
2014 FR-S SCION COUPE, FA20
Description
The lower the center of gravity, the greater the steadiness. By reducing the center of gravity of your FR-S by about one inch, you'll get quicker turn-in, enhanced cornering and steering response on a variety of road surfaces. Features TRD-developed proprietary spring rates (linear in front, progressive in rear). Lowers vehicle's center of gravity by approximately 1-inch (1-1/8-inch). Red powder-coat finish provides superior corrosion resistance. Designed to work with stock struts and shock absorbers.2. Manzo USA Scion FR-S Lowering Drop Springs Coil Kit
Feature
NoneDescription
Our lowering springs are made from SAE 9254 cold wounded steel, which are powder-coated for maximum durability.3. Skunk2 519-12-1001 Lowering Spring for Subaru/Scion
Feature
What's more, Skunk2 Lowering Springs also help counteract squatting under acceleration as well as nose-diving while brakingAll Skunk2 Lowering Springs are CNC-wound using the highest quality SAE 9254V spring steel, shot-peen stress relieved, and corrosion-protected thanks to powder coating and specialized phosphate treating processes
The results are a lower center of gravity and race car-like handling, yet smooth, comfortable ride characteristics-the perfect balance between performance and comfort
Skunk2 Lowering Springs are compatible with OEM or aftermarket shock absorbers and look great on vehicles with stock or aftermarket wheels
Description
Skunk2 Lowering Springs for the 2013+ BRZ/FRS are designed to dramatically improve handling performance and driver feel through significantly increased cornering grip and reduced body roll.4. Godspeed(LS-TS-SN-0001-A) Traction-S Performance Lowering Springs, Reduced Body Roll, Improve Overall Handling, Quicker Steering Response, Set of 4
Feature
Fits 2013, 2014, 2015, 2016 Scion FR-S; Average Lower: Front: 1.8" Rear: 1.3" ; Spring Rate(kg/mm): Front: 3.09 | Rear: 2.88/5.63Enhances on-road vehicle performance quicker turn-in, enhanced steering response and improved cornering.
Multi Heat Treated SAE 9254 Wire, Cold Wound To Prevent Sag Overtime; Powder Coat Finished For Corrosion Protection
Designed To Work With OEM Shocks, Better With Aftermarket High Performance Shocks; Lowered While Maintain Ride Comfort
Engineered to ensure against rattling, clunking or rubbing even when pushed to the limit.; Lifetime Limited Warranty On Material Defect And Craftsmanship
Description
Godspeed Project's performance lowering springs are cold wound on coil winding machine with SAE 9254 spring wire material, one of the ideal materials available. Manufacturing Process involves steel material going through heat treatments before winding into coils, these are necessary steps in order to deliver an outstanding ultra high tensile strength and provide equal spring rates that are extremely durable in order to resist premature sagging. The end result of this process generates a spring that specifically offers improved vehicle handling and response capabilities while maintaining a very smooth yet comfortable ride experience. Each spring has been carefully precision tested and inspected in order to provide outstanding handling, response, control and balance throughout the suspension of your vehicle. These quality made performance lowering springs designed to work with OEM shocks and offer a generous drop to your vehicle while remaining at a comfortable daily ride height in order to avoid bottoming-out and clearance issues. Not only lowering your vehicle will improve vehicle handling, will also enhance overall appearance.
Average Drop: Front: 1.8" Rear: 1.3"
5. Godspeed (LS-TS-SN-0001) Traction-S Lowering Spring Set For Scion FR-S 2013-2016 ZC6 gsp set kit
Feature
GODSPEED TRACTION-S SPRINGS FOR SCION FR-S 2013-2017/ SUBARU BRZ 2013-2017(ZC6)Multi Heat Treated SAE 9254 Wire, Cold Wound To Prevent Sag Overtime
Designed To Work With OEM Shocks, Better With Aftermarket High Performance Shocks
Average Drop: Front: 1.8" Rear: 1.3"
Lifetime Limited Warranty On Material Defect And Craftmenship
Description
GODSPEED PROJECT TRACTION-S SPRINGS FOR SCION FR-S 2013-2017/ SUBARU BRZ 2013-2017(ZC6)
Godspeed Project's performance lowering springs are cold wound on coil winding machine with SAE 9254 spring wire material, one of the ideal materials available. Manufacturing Process involves steel material going through heat treatments before winding into coils, these are necessary steps in order to deliver an outstanding ultra high tensile strength and provide equal spring rates that are extremely durable in order to resist premature "sagging". The end result of this process generates a spring that specifically offers improved vehicle handling and response capabilities while maintaining a very smooth yet comfortable ride experience. Each spring has been carefully precision tested and inspected in order to provide outstanding handling, response, control and balance throughout the suspension of your vehicle. These quality made performance lowering springs designed to work with OEM shocks and offer a generous drop to your vehicle while remaining at a comfortable daily ride height in order to avoid bottoming-out and clearance issues. Not only lowering your vehicle will improve vehicle handling, will also enhance overall appearance.
Average Drop: Front: 1.8" Rear: 1.3"
NOTE: Lowering height are measured from center hub to edge of fender arch.
Multi Heat Treated SAE 9254 Wire, Cold Wound To Prevent Sag Overtime
Powder Coated Finish Prevent Corrosion
Designed To Work With OEM Shocks, Better With Aftermarket High Performance Shocks
Average Drop: Front: 1.8" Rear: 1.3"
Lifetime Limited Warranty On Material Defect And Craftmenship
High Performance Lowering Spring Set
Does not come with installation instructions
6. H&R Super Sport Lowering Springs 2013 BRZ/FR-S (54408-77)
Feature
Front Lowering: 1.2inRear Lowering: 1.4in
Description
H&R Springs - Super Sport Springs:Every spring produced by H&R comes from the H&R ISO 9001 certified engineering and manufacturing facility in Germany. All H&R springs are produced from a special 54SiCr6 spring steel, which has strength rated at 290,000 psi resulting in unrivaled tensile strength and resiliency. Only from H&R, H&R Super Sport Springs have all the features of Sport Springs, plus additional loweringgreat for the seasoned enthusiast looking for a little more. These high tech progressive springs retain superior ride comfort. The handling of your vehicle will be improved with a lower center of gravity. H&R Super Sport Springs give your vehicle the best-looking performance stance. (Lowers 1.75 - 2.3 inches on average)7. Eibach (410582) Sportline Lowering Spring Kit
Feature
Genuine Eibach productDescription
Eibach Sportline SpringsSportline SpringsEibach Sportline is the extreme-performance spring set createdfor the extreme enthusiastthe one who craves a race-car attitudefor maximum street performancewith the lowest possible drop, butwith the exceptional ride quality you expect from Eibach.Engineered with the same care as our Pro-Kit springs, EibachSportline springs achieve legendary handling by aggressivelylowering your cars center of gravity, using ourprecisionengineered progressive spring rates.By radically lowering your cars center of gravity, ourSportline springs dramatically reduce squat during acceleration,body roll in corners and nose-dive under braking. By using ourproprietary, progressive spring design, our Sportline springsprovide the ultimate balance between high performance, extremelowering and comfortable ride quality. When combined with todayswild 18, 19 or 20 wheels and tires, the result is a car thathandles just as white-hot as it looksFeaturesExtreme Performance Meets Extreme StyleRace-Car Like HandlingLower than our Pro-Kit. Lowers Vehicle 1.7 2.3 (loweringamount varies by application use our application look-up forspecific information on lowering for your car or truck)Progressive Spring DesignExcellent Ride QualityPart of the Eibach Sport-SystemMillion Mile Warranty8. 2013-2016 Scion FR-S D2 PRO Series Springs (D-SP-SC-06)
Feature
Progressive Spring Rates: Allows for a comfortable ride under normal travel and during compression, the rate increase to help with body rollHigh Tensile Wires: Cold wound for strength and shot peened for increased stress relieft
1 Year Manufacturer Warranty.
1 Year Manufacturer Warranty
Description
D-Sp-Sc-06 Scion Fr-S Front Drop: 1.75 / Rear Drop: 1.25 Tags: >D2 Racing PRO Series lowering springs have been designed to give your car superior handling with an aggressive race look. Most other brands use a linear rate, but D2 utilizes a progressive rate for several reasons. A progressive rate allows a plush comfortable ride under normal travel, but since the rate shifts higher during compression, it stops "body roll" during heavy braking, hard acceleration, or fast cornering. By lowering the center of gravity from OE height you dramatically improve performance and handling characteristics. Features: Progressive Spring Rates: Allows for a comfortable ride under normal travel and during compression, the rate increase to help with body roll. High Tensile Wires: Cold wound for strength and shot peened for increased stress relieft 1 Year Manufacturer Warranty.9. ZX Purple Lowering Springs 2012+ FR-S BRZ 1.75F/1.25R
Feature
ZX Performance lowering springs are manufactured of chrome silicon steel which exceeds OEM standards.Lowers 1.75" front and 1.25" rear
Includes lifetime unlimited mileage warranty
10. MTEC Scion FRS, BRZ, Toyota GT 86 Shifter Springs
