Finding your suitable regulator kegerator is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best regulator kegerator including detail information and customer reviews. Let’s find out which is your favorite one.
Best regulator kegerator
1. Taprite T752HP Two Product Dual Pressure Kegerator CO2 Regulator
Feature
Large easy adjusting knob to increase or decrease delivery pressureEach regulator has a sentry shut-down safety built into the body that instantly protects the dispensing system in the unlikely event of regulator failure
Outlet features shut-off with back flow check valve and 5/16" I.D. hose barb nipple
Permanent quad-ring seal on inlet nipple helps eliminate leaks, no need to use a fiber washer each time tanks are changed
Blow-off is factory set at 55-65 psig
Description
The TAPRITE ADVANTAGE Taprite regulators are built and tested in accordance with UL Standard 252 for compressed gas Regulators and UL 252A for compressed gas regulator accessories All Taprite regulator components and accessories are inspected by our Quality Department upon receipt in accordance with the requirements of MIL-STD-105E High CO volumetric flow provides continuity in product dispensing Polycarbonate bonnet will not chip, break, or fade 10 Micron Filter built in to keep contaminants out of regulator One repair kit for primary and secondary regulators. WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING.2. Kegco KC LH-542 Premium Pro Series Dual Gauge Co2 Draft Beer Regulator, Chrome
Feature
Beware of cheap imitation! Only Beverage Factory sells this regulator with the Kegco warrantyDual Gauge regulator shows you working pressure and tank pressure
Chrome Plated Brass Body
Manual Pressure Release Valve and Pressure Adjustment Knob
Integral Safety pressure relief valve releases at 45 PSI
Description
The Kegco 542 Pro series works with any Co2 Tank with a CGA-320 valve and measures PSI, as well as the volume of the Co2 gas in the Cylinder. The regulator body is constructed of forged brass with all brass connections and components, a sintered brass inlet filter, integrated nylon tank connection washer (and spare) and self resetting safety release valve. Both gauges feature an easy to read design. The top gauge lets you know how much Co2 Pressure is in the keg and displays 0-60 psi. The second gauge lets you know how much Co2 gas is left inside the Co2 Tank and features a 0-2000 display. A large adjustment knob with a lock ring allows gas flow to be changed without the need for a screw driver. This regulator includes a tamper proof safety pressure relive valve that releases at 45 psi. There is also a shut off valve that allows for instantly shutting off pressure to the keg without backing up your gas line.3. Dual Gauge CO2 Beer Regulator-Homebrew Kegerator Draft Beer Dispensing CO2 Regulator-Unit with CGA-320 inlet, 0-60 PSI Working Pressure, 0-3000 PSI Tank Pressure with Safety Pressure Relief Valve
Feature
The dual gauge beer regulator and professional grade tool that will always tell you working pressure and tank pressure with pinpoint accuracy.The heavy dual gauge CO2 beer regulator is a completely standard unitCGA320 and 3/8''.Every valve can be adjusted without tools and it is very easy to setup.
The On-off valve can relieve the pressure that make it easy to switch tanks and kegs.On-off valve for flow control,convenient and no waste a bunch of CO2 gas any more.
The barbed output allowing you connect a variety of gas line types easily.Made of high quality materials,durable,strength and easy to clean.
It is designed for you who want to have different taste of beer.By adding distributor to outlets,you can serve multiple kegs with this regulator.Get it to prepare for home-party and a gathering of friends.
Description
Size:Single OutputWeight:27.32 oz
Inlet connection:CGA320
On-off built-in check valve
Dual Gauge CO2 Regulator for Draft Beer Homebrew Kegerator.
It can maintain the pressure of the output gas and the steady flow.
Manual Pressure Release Valve and Pressure Adjustment Knob make the adjust easier and better.
The heavy duty double gauge and professional grade tool that will always tell you working pressure and tank pressure with pinpoint accuracy.Both gauges are easy to read.
The top gauge shows how much CO2 Pressure is in the keg and displays 0-60 psi. The second gauge shows how much CO2 gas is left inside the CO2 Tank and features a 0-3000 psi display.
You can get it for next party and leisure time,wish you have a nice day.
4. Dual Gauge CO2 Keg Beer Kegerator Regulator, Draft Beer Regulator, Draft Beer Dispensing CO2 Regulator, CO2 Keg Pressure Regulator By MRbrew
Feature
🍻Works with any Co2 tank with a CGA-320 valve, 5/16" barbed output for use with 5/16" ID hose, Integral Safety pressure relief valve releases at 45 PSI; Integrated nylon tank connection washer (and spare) Prevent leakage.🍻 Durable chrome-plated brass body, Inlet nipple has a sintered metal flow control filter to keep dirt and other particles from harming the internal regulator parts; Both gauges come equipped with rubber boots that help protect them from damage in the event of a fall.
🍻 This dual gauge draft beer regulator has a gauge on top that measures CO2pressure in the keg as well as a gauge on the side that indicates how much CO2is left in the gas cylinder, so you'll never be caught off guard by an empty CO2tank again.
🍻 Commercial grade design withstands the demands of the busiest bars and restaurants, allowing adjustments to be optimized for the operational range of beer, wine, coffee or whatever you're dispensing. A large adjustment knob allows you to make quick and accurate adjustments by hand and turns effortlessly, even in freezing temperatures.
🍻 We have a Satisfaction Guarantee. Letting you know that you have a free replacement or full refund in the case of you being unsatisfied with any part of your Beer Regulator. Without you having to go to the post office or pay for postage in every case.
Description
US CO2 valve threadStandard cylinder valve outlet connection
Inlet connection:CGA320
One gauge shows pressure for carbonating and dispensing. The other gauge displays how much CO2 is left, so you don't run out during the middle of your homebrew party
Package includes:
1* Co2 regulator
Matters needing attention:
1. Before installing the Co2 regulator gauge, open the cylinder valve to blow down the dirt, so as to prevent dust and moisture from entering the Dual Gauge CO2 Beer Regulator.
When opening the cylinder valve, the operator should not stand at the front of the outlet of the bottle valve to prevent the high-pressure gas from hurting suddenly.
2. The kegerator Co2 regulator should be turned loose before open the valve. When the cylinder valve is opened, it should be slow and not too hard to prevent high pressure gas from damaging the Co2 pressure regulator and high pressure meter.
3. After opening the cylinder valve, check whether there is any leakage of gas in each part, whether the pressure gauge works normally, and then connect the hose after the inspection is finished.
4. when adjusting working pressure, it should slowly rotate the pressure regulating screw to prevent high pressure gas from damaging the diaphragm or damaging the low pressure meter.
5. When the CO2 Keg Pressure Regulator is used in the process of freezing, use hot water or steam to thaw.Never use fire
6. When you stop working, you should close the bottle valve and slowly release the gas in the co2 regulator dual, and make the pressure regulating spring in a free state.
7. The CO2 Keg Pressure Regulator must be checked and calibrated regularly to ensure that the voltage regulation is reliable and the reading accuracy is accurate.
8. CO2 pressure reducer and other gas regulator can not be exchanged for each other.Always place a washer between the lock-down nut and the tank to ensure a tight seal and Replace washers regularly.
5. TerraBloom CO2 Keg Pressure Regulator for Draft Beer Kegerators. Dual Gauge Heavy Duty Unit with CGA-320 Inlet, 0-50 PSI Working Pressure, 0-3000 PSI Tank Pressure with Safety Pressure Relief Valve
Feature
HEAVY DUTY WITH DUAL GAUGES: TerraBloom CO2 Pressure Regulator for Draft Beer Setups is a heavy duty unit made with double gauges to accurately measure working pressure in the system and CO2 tank pressure.PROFESSIONAL GRADE: This CO2 Regulator fits all standard CO2 tanks with CGA-320 inlets. You can adjust the working pressure in your system via a control knob in the front. Gas Shut Off Valve for easy keg/tank swaps. Safety Pressure relieve valve/Chrome Shut Off Valve to prevent beer from backing up into the gas lines.
EASY INSTALLATION: All you need to install this CO2 Pressure Regulator is an adjustable wrench. Each unit is supplied with 2 O-ring washers. Always place a washer between the lock-down nut and the tank to ensure a tight seal. Replace washers regularly.
VERSATILE APPLICATIONS: Works with 15.5 Gallon Kegs, 5 Gallon Kegs, 1.75 Mini Kegs, Half Barrels and Quarter Barrel Units. Barbed Gas Outlet Fitting Allows easy connection to many gas line types.
WARRANTY: TerraBloom 30-day money back guarantee. 1 Year Warranty Against Manufacturing Defects.
Description
TerraBloom CO2 Regulator is specifically designed for use in draft beer setups. This CO2 regulator is equipped with 2 gauge displays: 1 for showing the working pressure in your draft beer setup as well as 1 for showing the pressure in your CO2 tank. This regulator attaches to standard North American CO2 gas tanks with a male thread (standard CGA-320 connection). Red knob on the regulator lets you adjust the working pressure without any additional tools.6. Taprite T742HP Primary Double Gauge CO2 Regulator, Brass
Feature
Mixed gas primary co2 regulatorScrew adjusted pressure
Output pressure gauge: 0-60 psi
Tank pressure gauge: 0-2000 psi
Description
WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING.
You can use this primary regulator on any CO2 tank with a CGA-320 valve. CO2 tanks have a male thread (CGA-320); these regulators have a female thread. This regulator features dual gauges to measure PSI as well as the volume of CO2 in the cylinder, indicating how much CO2 is left in the cylinder and when you should have it refilled. The knob on the front is used to adjust the output pressure.
7. TapRite Separate Pressure Adjusting 2 Product CO2 Regulator
Feature
AT PRESENT WE DO NOT SHIP TO CALIFORNIATap two kegs at the same time and control the pressure to each
0-60 gauges measure pressure to each keg
0-3000 gauge measures CO2 in tank
Nonadjustable "shut down" blows off at 55-65 PSI
Description
WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING. Tap two kegs at the same time and control the pressure to each of them individually. This two product two pressure CO2 regulator has two separate gauges to uniquely measure the pressure to each keg and allow you to adjust it particularly for the type of beer or beverage you are drinking. A third gauge tells you the amount of CO2 left in your tank. Regulator attaches directly to CO2 tank and has an air shut off switch for each CO2 line. Nonadjustable shut down blows off at 55-65 PSI. The polycarbonate bonnet is lighter weight and stronger than zinc bonnet regulators and it will not corrode in wet environments. No special tools are required to raise or lower the CO2 pressure. The cap knob simply pulls out so it can be turned to adjust pressure up or down then pushes back in to lock in pressure. In stock and ready to ship. Features: Tap two kegs at the same time and control the pressure to each. 0-60 Gauges measure pressure to each keg. 0-2000 Gauge measures CO2 in tank. Has air shut off switch for each CO2 line. High CO2 volumetric flow to insure continuity in product dispensing. Bonnet material is glass-filled Polycarbonate. 10 Micron filter built in to keep contaminants out of regulator. Less prone to freeze up problems. Approved by Pepsi and Coca-Cola. Specs: dimensions: 9inchW x 7 1/2inchH x 5 1/2inchD.8. Taprite 12218 1 X co2 Dual Gauge Regulator
Feature
At present we do not ship to californiaDual pressure gauges - Co2 tank and keg pressure
Integrated 5/16 barb outlet with check valve to prevent backflow
0-50 psi range, 60 lb and 2000 lb gauges
Duck-bill shutoff, check valve, and a red easy adjustment cap
Description
Warning: this product contains one or more chemicals known to the state of California to cause cancer and birth defects or other Reproductive harm. Wash hands after handling. Robust design delivers performance and reliability. Extremely durable and user friendly polycarbonate bonnets make adjustments a snap. Pull cap to adjust the pressure and push back to lock it in. High CO2 volumetric flow provides continuity in product dispensing. This primary regulator connects directly to its gas source so it's ready to rock. Recommended operating pressure should be limited to 2/3 of the gauge range for maximum accuracy. UL approved per UL252 Class IV rating for CO2. Polycarbonate bonnet will not chip, break or fade. 10 micron filter built in to keep contaminants out of regulator.Taprite regulators are used throughout the beverage industry. This regulator is the most consistently accurate and well built regulator on the market. This unit stays on pressure even when your CO2 tank level does down. Approved for use by all major beer distributors and Breweries. Shutoff Valve is a ball Type check Valve that prevents product back-flow into the regulator and tank. Solid Brass with extra long nipple. Regulator has pressure safety system (burst at 55 to 60 psi). permanent Quad ring seal on Inlet nipple helps eliminate a source of leaks. no need to use a new fiber washer each time tank is changed. Regulator will be double boxed to avoid any damage in transit.9. Brewin Dual Gauge Co2 Draft Beer Dispensing Regulator
Feature
0-3000 psi high pressure gauge0-60 psi low pressure gauge
Shutoff valve for flow control
Blow off safety relief valve
Comes with tank washer
Description
This is a Brewin brand dual gauge CO2 regulator used for draft beer setups. The high pressure gauge reads between 0-3000 psi and the lower pressure gauge reads between 0-60 psi. There is an easy to turn knob which does not require any screw driver to adjust the pressure like other CO2 regulators and will easily dispense your beer consistently around 10 psi with little fluctuation in pressure. There is a shutoff valve for additional flow control.10. MANATEE Co2 Beer Regulator Single Gauge Kegerator Heavy Duty Features Adjusting Screw - 0 to 80 PSI / 6 Bar Tank Pressure CGA-320 Inlet w/ 3/8" O.D.
Feature
INTORDUCING Pro Co2 Beer Dual Body Regulator. The heavy duty double gauge and professional grade tool that will always tell you working pressure and tank pressure with pinpoint accuracy.HEAVY DUTY - SINGLE REGULATOR This is a completely standard unit - you can be assured it works with everything! This regulator features a convenient T STYLE pressure adjusting handle that can be adjusted without tools. You can feel the heft of this unit at almost three pounds and if your Co2 tank is correctly chained to the wall it should last you a very long time.
PERFECT for those who want to keep different pressure on different beer styles. It is also used for those who wish to have beer and soda off the same CO2 tank. You can serve multiple kegs with this system by adding ain air distributor to one or both outlets.
HAS a barbed output allowing you connect a variety of gas line types easily. There is a shutoff valve so you can relieve the pressure and easily switch kegs and tanks.
EQUIPPED with all the specs a business owner could ever ask, this tool will become your dependable, go-to pressure monitoring solution that will offer you the peace of mind you need. Most Accurate and Well Built regulators on the Market! CO2 Beer Regulator, The Pro's Choice!
Description
Beer Draft Regulator Supreme!
Introducing Pro Co2 Beer regulator. The heavy duty double gauge and professional grade tool that will always tell you working pressure and tank pressure with pinpoint accuracy!
Feature
Single gauges for maximum control of how much pressure goes in and out of the kegSmart Barbed output for easily connecting/ switching between kegs and tanks
Shut-off valve with built-in check valve for beer back-up prevention
Pressure safety & permanent seal at the inlet nipple that provides enhanced protection of leaks
Heavy duty construction
Heavy duty single gauge
Big body for less pressure fluctuation
Outlet barb sized for use with 5/16" ID gas hose
Regulator has a pressure safety system with blow off at 0 to 60 PSI
Eliminates the need for fiber washers upon refill.
Equipped with all the specs a business owner could ever ask, this tool will become your dependable, go-to pressure monitoring solution that will offer you the peace of mind you need.
Guarantee HIGH QUALITY!
>> Hurry! Scroll Up & Click the yellow "Add to Cart" button now! CO2 Beer Draft Regulator, The Pro's Choice.
