Shopping for the best antenna tripod roof mount kit is about as tricky as finding your soulmate. You not only think about quality, price but also need to find where to buy antenna tripod roof mount kit. Don’t worry any more! We spend many hours to review and compare antenna tripod roof mount kit to make the short list for you. Let’s check which product is suitable with you.
Best antenna tripod roof mount kit
1. Winegard-11773 TR-1518 Satellite Tripod Mount (Compatible with Carryout, Pathway and Playmaker RV Satellite Antennas) - Adjustable Height, Gray
Feature
Compatible with all Winegard Carryout, Pathway and DISH Playmaker portable satellite antennas. Cross functional mount for maximum versatility.Adjustable Height and Level - Adjusts from 14.5" to 22". Quickly disassembles for compact storage.
Built Tough - Built to withstand the harsh outdoor environments. Easy assembly with sturdy mount including ground anchor and bungee. 2 years parts, 1 year labor warranty.
Protect Your Antenna - Makes usage easier while also raising and protecting your satellite antenna from damage and theft using the anchor loop.
Winegard Antenna Experts - Leading US designer and manufacturer of quality TV antenna and signal reception equipment since 1954. Designed and built in the U.S.A.
Adjustable height and leveling settings of 14.5 inches - 22 inches
Quickly disassembles for compact storage
Compatible with Carryout antenna models (GM-1518, GM-1599, GM-MP1)
Description
Aluminum tripod elevates your Winegard carryout (gm-1518, gm-1599 or gm-mp1) portable satellite antenna off the ground for protection against dirt/mud/snow/water. Adjustable height settings from 14. 5 inches to 22 inches. Sturdy ground anchor, 6 inches bungee cord and anchor loop hold the tripod and satellite antenna securely. Easy assembly; quickly disassembles for compact storage. Shipping weight, 4. 4 pounds. Made in the USA. Compatibility: DISH Playmaker, Pathway X1, Pathway X2, Carryout G2, Carryout G2+2. Winegard DS-3000 J Pipe Mount for Antennas, 39"
Feature
3ft heavy-duty Galvanized steel tripod mount for Off-air antennaTripods & masts over 10ft should be guy wired
Pitch pads are recommended but not included
Designed for outdoor Antennas
Mountable on side of house or roof
Highest quality build
E-coat finish stops weathering
Extra height improves antenna performance and clears obstacles
Extra wide base for stability
Made in USA
Description
The WINEGARD DS-3000 "J" Pipe mount is designed for outdoor antennas. It can be used on either end of pipe for best mounting. Pipe is made of galvanized steel, 39 inches long, with a wall thickness of .060 inches. 1.66" Of, E-Coated for maximum protection from the elements.3. Skywalker Signature Series 5 ft Heavy Duty Tripod
Feature
Accommodates masts up to 2" in outside diameterSturdy metal construction stands 5ft tall
Tripod leg positioning ideal for Off-Air Antenna installations
Perfect for DDS (Digital Satellite Service) / DBS (Direct Broadcasting System) Antennas & Satellite Dishes
(Please Note: Lag bolts, mast, and pitch pads not included)
Description
Need a sturdy tripod that can be mounted almost anywhere? Then look no further! This heavy-duty 5ft tall tripod is perfectly constructed to mount an antenna or satellite dish wherever you need. Each of the three tripod legs features pre-drilled holes at the base of the foot to make installing easy. Please note: Lag bolts, mast, and pitch pads not included.4. RCA Premium Antenna Tripod (VH130R)
Feature
3 foot antenna tripodFully assembled and easy to Set-Up
Works with all brands
Description
Premium 3 foot RCA antenna tripod mount. Comes fully assembled and easy to set-up. Works with all brands.5. Skywalker Signature Series Heavy Duty 3ft Tripod Base with 1.66 Mast
Feature
Permanently mount an antenna or satellite dish on the roof with Skywalker's Heavy Duty 3ft Tripod Base. The mast AND installation hardware is included, so mounting your desired antenna is made that much simpler.An advantage of Tripod mounts is that you can mount them almost anywhere. From the peak of a rooftop to a flat platform, this tripod can handle it. The sturdy feet with multiple mounting holes will make sure it stays put.
The Tripod is surprisingly heavy duty without being overly weighty which, conveniently, makes it easy to carry up a ladder. It folds out into the proper tripod position and, once mounted, supports the mast and antenna securely.
Tripod comes with its own 1.66" x 28" mast to get you started. It is secured in place via the bolts and nuts attached to the Tripod at the mast base and Tripod top.
The Skywalker Signature Series Heavy Duty 3ft Tripod Base can support masts up to 2" OD.
Description
Heavy Duty 3ft Tripod Base with 28" MastPermanently mount an antenna or satellite dish on the roof with Skywalker's Heavy Duty 3ft Tripod Base. The mast is included, so mounting your desired antenna is made that much simpler.
Mount Here, There, Anywhere!
An advantage of Tripod mounts is that you can mount them almost anywhere. From the peak of a rooftop to a flat platform, this tripod can handle it. The sturdy feet with multiple mounting holes will make sure it stays put!
Heavy Duty
The Tripod is surprisingly heavy duty without being overly weighty which, conveniently, makes it easy to carry up a ladder. It folds out into the proper tripod position and, once mounted, supports the mast and antenna securely.
Mast Included
Whereas most of the time you have to purchase a mast separately, this Tripod comes with its own 1.66" x 28" mast to get you started. It is secured in place via the bolts and nuts attached to the Tripod at the mast base and Tripod top. The Skywalker Signature Series Heavy Duty 3ft Tripod Base can support masts up to 2" OD.
6. Winegard SW-0010 Tripod Mount for Antenna
Feature
Tripods & masts more than 10ft should be guy wiredPitch pads are recommended but not included
Great for all your needs
3-Ft Heavy-Duty Galvanized Steel Tripod Mount For Off-Air Antenna
Tripods & Masts Over 10 Ft Should Be Guy Wired
Pitch Pads Are Recommended But Not Included
Description
3-Ft Heavy-Duty Galvanized Steel Tripod Mount For Off-Air Antenna; Tripods & Masts Over 10 Ft Should Be Guy Wired ; Pitch Pads Are Recommended But Not Included7. 3 ft. Satellite Tripod Mount with 1.66" OD Mast
Feature
3ft tripod with 1.66 diameter poleGalvanized for long term outdoor use
Folds down for storage and transport
Holes in tripod feet for mounting. Can mount over peak of asphalt roof
Great for DISH satellite, Wifi, and Off-Air antenna installation
Description
The 3ft galvanized is perfect for satellite dish, wifi, and off-air antenna installations. the 1.66 inch diamter pole fits most all DISH (Network) satellite dishes, most Free-to-air dishes, and some Directv satellite dishes (measure your Directv dish opening to make sure). 1.66 is also a good diameter for U bolt assembly for antennas. Tripod and pole are galvanized. Tripod sets up in minutes!8. 3 feet Satellite Tripod Mount with 2-Inch OD Mast
Feature
37.4 x 6.3 x 5.5 inchesDescription
Heavy-duty 3 foot galvanized satellite tripod. For use with 2 O.D. mast. Mounts DIRECTVs Slim Line models SL3, SL5, AT9, AU9-S. It can also be used as a support for an off-air VHF/UHF antenna. The PVTP3U is a heavy-duty tripod used to mount satellite antennas or off-air antennas. It is super sturdy, made of 18 gauge steel. The 3 tripod includes a 28 long center universal support pole which is 2.0 O.D. on one end and 1 5/8 O.D. on the other end.9. Ambient Weather EZ-48 Weather Station Tripod and Mast Assembly
Feature
Perfect for mounting weather stations. This universal mounting tripod fits all weather stations and is preferred over the Davis Instruments 7716 due to better materials and design. Works with all Davis Weather StationsThe EZ-48 Tripod assembly is constructed of 18 gauge 1008-10 steel tubing, galvanized using the Flo-Coat (zinc-chromate-polymer) process for excellent corrosion protection
Mast collars feature a captive stop-nut design, to eliminate lock nut spin when tightened; and a mast supporting cup for additional stability. The tripod base is 33-Inch (85.8 cm)
Installed Tripod Height: Supplied with one mast for an assembly height of 53"-Inch (150.8 cm). Add 35" mast extensions to increase the height 31-Inch per extension (ASIN B003EAU52Q)
Add ground stakes (ASIN B004M4IO8K) for ground installation. Add Tar Pad kit (ASIN B003EB3C4S) for rooftop installations
Description
Perfect for mounting weather stations. This universal mounting tripod fits all weather stations and is preferred over the Davis Instruments 7716 due to better materials and design.The EZ-48-3AB-125-35 Tripod assembly is constructed of 18 gauge 1008-10 steel tubing, galvanized using the Flo-Coat (zinc-chromate-polymer) process for excellent corrosion protection.
Ungalvanized leg braces, mast collars, & connecting components are gold irridited for corrosion protection.
Mast collars feature a captive "stop-nut" design, to eliminate lock nut spin when tightened; and a mast supporting cup for additional stability. The tripod base is 33" (85.8 cm).
Tripod height 33 inches (85.8 cm). Supplied with one mast for an assembly height of 53" inches (150.8 cm), and an adjustment range of 41 to 58 inches (106.6 to 150.8 cm).
Add up to two mast extensions (see below, EZ-125-35M) to extend the height of 31" per mast extension.
Add the optional stake kit (see below, EZ-245-SK) for moderate wind ground installation.
Add the optional tar pads (see below, EZ-46-3) for roof-top installations.
Add the optional guy wire kit (see below, EZ-GWA) for configurations with two extension poles, or for locations that experience sustained periods of high wind.
10. Indoor Attic Mount with Signal Peaking Technology - Range Xperts HD-T200-Tripod
Feature
SIGNAL PEAKING TECHNOLOGY - Indoor and/or Portable TV Antenna (note: for our Ham Radio tripod version, search for ASIN: B071983GNQ) Antenna Mount allows for 3 Modes of movement are fully adjustable on the fly (even after antenna installation), increase / lower height (min of 40 inch (3ft 6in) ceiling height required) & rotate direction anytime and lock down securely with tension knob, or try it room to room or in the attic by simply moving it (fully portable and tool-less).MOUNT YOUR HIGH GAIN OUTDOOR ANTENNAS INDOORS! - Specially designed for mounting high gain Outdoor TV Antennas indoors, it's vastly superior to fixed attic mounts in both ease of install and provides vastly better TV reception results too (we'll explain how) via its signal peaking technology!
BETTER RECEPTION - You can finally get the absolute best reception that's possible indoors. These indoor antenna tripods are leaps and bounds better in reception performance than fixed attic mounts, as they both reduce inside home loss by allowing the antenna to be installed with some distance away from lossy home materials & they still have full adjustment after mounting. Instantly fine tune your direction and/or height afterwards with a simple tension locking knob (no tools needed)
SPECIALLY DESIGNED FOR OUTDOOR TV ANTENNAS - This may look similar to a camera tripod by the picture, however it's not even close to the same. This tripod is much more robust, heavy duty, and the top pole is the same diameter as a standard TV antenna mast (so it universally fits all outdoor antenna mast clamps) and handles awkward, large TV antenna loads with ease! It also has an advanced "anti-tipover" design that allows it to handle even 7ft VHF off-centered antennas rock solid
NO ASSEMBLY, DRILLING OR NAILING - This stout, heavy duty indoor tripod stays in place without needing any bolts, screws, or holes to drill into your valuable home's wood. Installs in seconds without tools! This heavy duty tripod easily handles even 7ft antennas securely at full 6ft height (legs fully widened) & doesn't need to be bolted or screwed down into your valuable homes wood! Raise/lower from 39inch to 6ft and fully rotatable; once you find a sweet spot, lock its position with hand knob.
