When you looking for rotary indexer, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable rotary indexer is not an easy task. In this post, we show you how to find the right rotary indexer along with our top-rated reviews. Please check out our suggestions to find the best rotary indexer for you.
Best rotary indexer
1. Mophorn Dividing Head BS-0 5Inch 3 Jaw Chuck Dividing Head Set Precision Semi Universal Dividing Head for Milling Machine Rotary Table Tailstock Milling Set (5 Inch Chuck)
Feature
Model#: BS0 Dividing Head;Swing: 7-7/8" ; Center Height: 3.937" ; Support 5'' chucks.Gear has 1:40 ratio;Direct index plate of 24 holes allow direct dividing in 2,3,4,6,8,12 & 24.
Accurate precision, little backlash, fine appearance and strong structure so can assure smooth rotation.
The swivel head can be locked of any angle from 10 below horizontal to 90 vertical-precision fitting to base assures smooth rotation.
This 5 inch Universal dividing head is installed on the milling machine for machine tool accessories will be arbitrarily divided into equal portions of the workpiece.
Description
BS-0 Precision Dividing Head 5" 3 Jaw Chuck Tailstock Dividing Plate CNC Milling
Introduction :
This is our semi-universal dividing head,one of machine tool accessories for dividing workpieces into equal partitions. By using dividing scale ring, vernier, locating pin, index plate and change gear, workpieces placed can be divided into equal partitions according to your demand. It can be used for direct and indirect dividing. Able to complete gear, face and flute processing without need of accessories, however its whole construction is the same with the universal type.
Technical Parameters
Swing: 7-7/8"
Center Height: 3-15/16"
Headstock Taper: 7 B&S
Number of holes:
A-Plate:15,16,17,18,19,20
B-Plate:21,23,27,29,31,33
C-Plate:37,39,41,43,47,49
Worm gear reduction ratio: 1:40
Hole Through Spindle: 0.709"
Threads on back plate: 1-1/2" - 8
Spindle Bore (Clear Through): .708"
Spindle Mount: 1-1/2" x 8 TPI
Spindle Taper Runout: .0006"
Features
-Head stock swivels to all angles
-All number from 1-50
-All even numbers from 50-100
-Many others from 50-400
-Spindles with tapered roller bearings are on integral part of all diving heads
-Can be easily Adjusted to any angle between +10 to 90 degrees from a horizontal position
2. SHZOND Dividing Head Set 3 Jaw Lathe Chuck Dividing Head 5 Inch with Tailstock Dividing Plates for Milling Machine (5 inch dividing head)
Feature
This dividing head set includes headstock, 5" 3-jaw lathe chuck, tailstock, center&driving dog, threaded back plate & 3 dividing plates. 1:40 ratio.Headstock adjustable from 10 downward to 90 degree upward from the horizontal position
By using dividing scale ring, vernier, locating pin, index plate and change gear, workpieces placed can be divided into equal partitions according to your demand
The 24 quick-dividing holes can complete 2, 3, 4, 6, 8, 12, 24 division indexing
3 dividing plates are attached along with the dividing head for indirect dividing in any division indexing 2-50, 51-380 except prime numbers and certain other numbers
Description
Dividing Head Set 3 Jaw Lathe Chuck Dividing Head 5 Inch with Tailstock Dividing Plates for Milling Machine
Workpieces can be divided into any week for the division or straight line for indexing.The workpiece can be installed into the required angle (vertical, horizontal or inclined.through the exchange of gears, the indexing head can be connected with the table drive system, so that the indexing spindle with table feed motion for continuous rotation to milled spiral surface and the rotary surface.
Item Specifications
Swing: 7-7/8"
Center Height : 3-15/16"
Headstock Taper: 7 B&S
Spindle Bore (Clear Through): .708"
Spindle Mount: 1-1/2" x 8 TPI
Spindle Taper Runout: .0006"
The front of dividing head dimension: 7.59",5.51",6.81",3.93",6.53",3.54",0.63"
The tail of the dividing head dimension:6.89",3.42",4.21",3.93",5.12",3.62",0.63"
Dividing Plate: Quantity of dividing plate's hole (Helical gear reduction ratio 1:40)
Dividing Plate A: 15,16,17,18,19,20
Dividing Plate B: 21,23,27,29,31,33
Dividing Plate C:37,39,41,43,47,49
Package content
Dividing head set x 1
3 x Dividing Plates
1 x Tailstock
1 x 3 Jaw Chuck
3. 6 Inch 3-Jaw Front Mount, Plain Back Lathe Chuck With 2 Sets Of Jaws (3800-5822)
Feature
Lathe Chuck Size 6"FRONT-MOUNT, 3-JAW CHUCK PLAIN BACK LATHE CHUCK, WITH 2 SETS OF INTERCHANGEABLE JAWS, (INTERNAL AND EXTERNAL)
Through holes for easy direct mounting on dividing heads, rotary tables, spacers ,or other indexers.
Description
6 Inch 3-Jaw Front Mount Lathe Chuck With 2 Sets Of Jaws4. NEW CAMCO 1305RDM4H48-330 ROTARY INDEXER 1305RDM4H48330
Description
NEW CAMCO 1305RDM4H48-330 ROTARY INDEXER 1305RDM4H48330B3/S57 BB5. BS-0 Dividing Head Set with 5" Chuck, Tailstock, Dividing Plates, and more
Feature
5 Year WarrantyComplete Set
Tilts up to 90 degrees for any angle
3 Plates, Tailstock, and Chuck Included
Quick Indexing Feature for faster simple indexing
Description
Main Features: Head tilts 10 degrees down, and 90 degrees in the vertical direction, so it can be used for any angle needed Quick indexing feature, for fast indexing without dividing plates, in 15 degree increments (24 positions) makes quick work of simple tasks such as machining hex shaped bolt heads (3) Dividing Plates cover any divisions you would need Hardened Worm Gear for longer life Backed by a 5 year warranty honored directly through us in the USA Main Specifications: Center Height: 3-15/16" Swing: 7-7/8" Spindle Bore (Clear Through): .708" Spindle Mount: 1-1/2" x 8 TPI Spindle Taper Runout: .0006" Gear Ratio: 40:1 Spindle Taper BS-7 This set comes complete with everything as shown, as listed below: Dividing Head 5" 3 Jaw Chuck, with inside and outside jaws, and chuck wrench Adjustable Tailstock Dividing Plates (3 pcs.) Spindle Center Dog Driver (For use when turning between centers) 5 YEAR Warranty against any defective parts6. Sherline 87105 CNC Rotary Indexer
Feature
Allows you to convert your 8730 CNC Rotary Table to the 8700 Rotary Table with IndexerAll entries are made from simple keypad!
Includes the microprocessor unit with numeric input keypad, 115 VAC power source, and all necessary connecting cables
Description
Sherline 87105 CNC Rotary IndexerThe 87105 CNC Rotary Indexer allows you to convert your 8730 CNC Rotary Table to the 8700 Rotary Table with Indexer. This indexer is specific to the rotary table, and should not be confused with the linear controllers for the X-, Y-, or Z-axes e.g. P/N 8800/8810 or P/N 8850/8855.
All entries are made from this simple keypad. No separate computer is needed. The Rotary Indexer includes the microprocessor unit with numeric input keypad, 115 VAC power source, and all necessary connecting cables.
Operation is very simple
After entering the number of steps per revolution (or the number of degrees per step) on a simple numeric keypad, the table advances quickly and precisely to the next position at the touch of a single advance key. If an error is made, previous positions can be accurately recalled by hitting another button. Basic resolution is 28,800 steps per revolution, 0.006 per step. This allows the accurate machining of items like gears with odd numbers of teeth. Computations are made internally to a high degree of accuracy to avoid cumulative errors.
The CNC rotary indexer is a stand-alone unit. You get everything you need to make complex indexing jobs easy. In addition, the unit can be connected to an existing CNC control to act in conjunction with that system. An input signal triggers the programmed function. When it is complete, it signals back to continue the program. The unit can also be daisy chained with other units to trigger sequential actions. As with all Sherline accessories, complete instructions are included.
The rotary table can also be daisy chained with Sherlines linear controller (P/N 8800) to achieve combinations of rotary and linear movement in sequence. This makes it easy to set up for relatively sophisticated operations like cutting gears without having to know anything about CNC programming beyond what is entered from these simple key
7. CNC 4" rotary indexer
Feature
3700 4 rotary table is fitted with a dual shaft NEMA 23 stepper motor to drive it2 amp, 136 oz-in stepper motor is driven by programmable keypad/driver unit
Resolution: 400 steps/rev (.0125)
Rotation speeds: programmable from 1 to 50 per second
Divisions (0-999), Degrees (to 3 decimal places), Program and Settings modes
Description
Based on the 3700 4" rotary table, this stand-alone CNC indexer can make your dividing and indexing jobs easy. Instead of cranking the rotary table handwheel by hand, you simply input your desired divisions or degrees and hit the NXT (Next) button. The stepper motor accurately advances the table to your preprogrammed position. You can divide a circle into from 1 to 999 divisions or into degrees to three decimal places at the touch of a button. The internal memory chip can store two programs of up to 40 steps each with up to four programmable parameters for each step. Resolution of the stepper motor is .0125 per step or 28,800 steps per revolution .006/step based on 400 steps per revolution and a 72:1 worm gear. Rotation speed is programmable between 1/second and 50/ second. The unit can also be daisy-chained to communicate with other 8700 or 8800 (linear control) units to put together sophisticated sequential CNC movements without any need to learn G-code. A 120 Volt (input) 24 Volt (output) power supply is included as are an extension cable and daisy-chain cable. The 136 oz-in stepper motor includes a handwheel on the rear shaft for optional manual control. Works with Sherline mills or with other mills, drill presses and production fixtures. Its small size makes it a good fit inside compact enclosures.8. Sherline 8700, CNC Rotary Table Indexer
Feature
Rotation speed: Programmable from 1/sec to 50/secResolution:Motor-400 steps/rev, Table-28,800 steps/rev (.0125/step .006)
While running in continuous mode, speed can be reset to "faster" or "slower" setting with keypad
Table size: 4" diameter, 2"
Made in the USA
Description
Included in the package is the rotary table, mounted stepper motor with preloaded and dampened coupling, power supply, computer/keypad unit, connecting cables, mounting hardware and detailed instructions.9. Sherline 8710 - CNC Rotary Indexer Riser Plate
Feature
On rotary tables,bottom of the stepper motor mount extends a bit below the bottom surface of tableOn Sherline mills, the mount overhangs the side of the table so this is not a problem.
Made in the USA
