When you looking for pneumatic solenoid, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable pneumatic solenoid is not an easy task. In this post, we show you how to find the right pneumatic solenoid along with our top-rated reviews. Please check out our suggestions to find the best pneumatic solenoid for you.
Best pneumatic solenoid
1. Baomain 4V210-08 DC 12V Single Head 2 Position 5 Way 4 Pneumatic Solenoid Valve w Base
Feature
Model : 4V210-08; Working Voltage : DC 12VPosition & Way Number : 2 Position 5 Way;
Quick Fitting Inner Dia.: Base Part Fitting size 8mm, Solenoid valve fitting size: 6mm
Mounted Hole Dia. : 4mm/ 5/32"; Total Size : 153 x 117 x 90mm/6'' x 4.6'' x 3.5'' (L*W*H)
Weight : 1079g; Package Content : 1 x 4 Solenoid Valve w Base Muffler
Description
2. Baomain Pneumatic Air Control Solenoid Valve 4V210-08 DC 12V 5 Way 2 Position PT1/4" Internally Piloted Acting Type Single Electrical Control
Feature
Model : 4V210-08; Operation Type : Internally Piloted Acting TypeType: 2 Position 5 Way; Power Consumption : DC 12V; Operating Pressure: 0.15 ~ 0.8MPa
Position & Way Number : Two-position, Five-way; Female Thread Port Diameter : 11.4mm / 0.448", 8.5mm / 0.334";Joint Pipe Bore : Inlet=Outlet=1/4''
Total Size(Approx) : 110 x 66 x 22mm / 4.33" x 2.6" x 0.86" (L*W*H)
Weight : 205g; Package Content : 1 x Solenoid Valve
Description
3. 1/4inch DC 12V 2 Way Normally Closed Electric Solenoid Air Valve
Feature
Valve Type: 2 Way Normally Closed (Valve opens with energized) ; Port Size: 1/4" Female Port Coil Voltage: DC12V Service Media: Air, Gas, Liquid, Water ; Operation Model: Direct Acting; Flow Model: Uni-DirectionalThis solenoid valve has one 1/4" inch NPT inlet and one 1/4" inch NPT outlet port. Valve stays close when the coil is de-energized- and it opens when energized.
2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum). . Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized.
WIC Valve is compatible with SMC valves. Has two holes in the bottom and can be mounted in any position.
100% Brand New By AOMAG. 1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve WIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas.
Description
Description : 1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air ValveWIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas. This solenoid valve has one 1/4" inch NPT inlet and one 1/4" inch NPT outlet port. Valve stays close when the coil is de-energized, and it opens when energized. Has two holes in the bottom and can be mounted in any position. Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized. 2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum). WIC Valve is compatible with SMC valves.Specification :
Model Number : 2ACK-1/4-12VDC-G
Valve Type : 2 Way Normally Closed (Valve opens with energized)
Service Media : Air, Gas, Liquid, Water
Operation Model : Direct Acting
Flow Model : Uni-Directional Flow Rate : 0.23Cv (Fluid Flow), 22 SCFM at 100 PSI (Air Flow) Response Time : Less than 20 msBody Material : Anodized Aluminum Seal Material : NBR (Buna N) Armature Tube Material : Brass Plunger & Spring
Material : Stainless Steel Coil
Certification : CE Certification
Coil Power : 6.5W
Coil Class : F Class IP 65 (CE Certification)
Coil Duty : 100% ED (Continuous Duty)
Operating Pressure : Vacuum to 115 PSI
Operating Temperature : -5 to 80 C
Port Size : 1/4" Inch NPT Female Port
Coil Voltage : 12V DC
Voltage Tolerances : DC : +10% -5% ; AC : +10% -15%
Electrical Connection : Grommet Coil with 12" Lead Wire2ACK Series Electric Solenoid Valve Dimensions :
Package included : 1 x 1/4inch DC 12V Electric Solenoid Air ValveDetails pictures
4. Baomain Solenoid Valve 4V210-08 DC 12V PT1/4 2 Position 5 way Base Muffler Quick Fittings Set
Feature
Coil Voltage: DC 12VPosition & Way: 2 Position 5 Way
Port size: PT 1/4; CV value: 0.78
Quick Fitting Inner Dia.: Solenoid Valve: 6mm; Base: 8mm
Weight: 1344g
Description
5. Solenoid Air Valve DC 12V 1/4inch 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Valve
Feature
Valve Type: 2 Way Normally Closed (Valve opens with energized)Port Size: 1/4" Female Port
Coil Voltage: DC12V
Service Media: Air, Gas, Liquid, Water
Operation Model: Direct Acting; Flow Model: Uni-Directional
Description
Valve Type: 2 Way Normally Closed (Valve opens with energized)
Port Size: 1/4" Female Port
Coil Voltage: AC220V, DC24V, DC12V
Service Media: Air, Gas, Liquid, Water
Operation Model: Direct Acting
Flow Model: Uni-Directional
Flow Rate: 0.23Cv (Fluid Flow), 22 SCFM at 100 PSI (Air Flow)
Operating Pressure: 0 - 0.8Mpa(can be operated at 0 PSI (Vacuum))
6. 1/4" NPT 5 Way 2 Position Pneumatic Electric Solenoid Valve DC 24 V
Feature
U.S. Solid Pneumatic Valve- Industrial Grade Product.DC 24 V 5/2 Valve with 1/4" NPT Aperture
Versatile, Small, Responsive, Light, and Durable.
SHIPS FROM CLEVELAND, OHIO
EXPEDITED SHIPPING AVAILABLE
Description
Pneumatic types of solenoid valves can be found in a wide array of industries. Aircrafts use pneumatic valves to control the pressure and flow of hot engine air to the windshield for the anti-icing and rain removal. Food and beverage manufacturers use them to make, dispense or preserve food and beverage products. This is the U.S. Solid 1/4" 5 way 2 Position Pneumatic Electric Solenoid Valve. It is a switch for sending air to any pneumatic device, usually an actuator, letting a relatively small signal to power a large device. It is also the interface between electronic controllers and pneumatic systems. It allows pneumatic control of position, flow, pressure and temperature. This particular valve is a 5/2 valve which means it has 5 ports; 2 exhaust ports through which air is regulated as it flows out, 2 power ports that power the system, 1 supply port for the inlet of air pressure, and 2 flow positions. This valve is made with an aluminum alloy and has an aperture of 1/4" NPT. U.S. Solid pneumatic valves are reliable, low power consuming, and have long life.Specifications:
Brand U.S. Solid
SKU: JFPSV00011
GTIN-12 (U.P.C.) 888107024583
U.S. Solid Model: USS- PSV00011
Valve Type: 2 Position 5 Way
Thread Type: NPT
Operation/ Property: Normally Closed
Material: Aluminum Alloy
Size:: 1/4"
Effective Section Area (mm): 16
Voltage: DC 24 V
Applicable Media: Filtered Air
Flow Value (Cv): 0.89
Insulation & Protection: Class F; IP 65
Working Pressure: 0.15 ~ 0.8 Mpa
Max. Pressure Resistance: 1.2 Mpa
Direct Operated/ Pilot Operated: Pilot Acting
Operation Temperature: 5 ~ 50
7. BACOENG 3/8" 12VDC VITON Solenoid Valve (1/4",3/8",1/2",3/4",1" 12VDC and 110VAC Available)
Feature
3/8" DC 12V Solenoid Valve Both power lines can be connected with positive and negative polesVITON gasket.VITON gasket.VITON gasket.
Valve Type:Direct Acting, Wet Armature
Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel.
Ideal for for: do-it-yourself projects, moderate temperature applications, water exchange for aquarium, air horn, or bleeding moisture from an air tank.
Description
BACOENG VITONNormally Closed Electric Solenoid Valve;
3/8"ports, BRASS body, Viton seals, 12 volt DC, for air, water, or fuel
Thiselectric solenoid valve is constructed with a high-qualitybrass body, two-way inlet and outlet ports with one-quarter inch (3/8") female threaded (NPT) connections, and heat and oil resistant Viton seals.
The coil uses alternating current and energizes at12 volts DC; voltage range + or - 10%. 18 Watt power rating.
Direct lift valve operates from 0 PSI to a maximum pressure of 145 PSI (0 MPa to 1.0 MPa). Operational pressure range for water: 0 to 101 PSI; for oil: 0 to 72 PSI; for air or gases: 0 to 101 PSI.
3/8" (14 mm) flow aperture permits a unidirectional flow capacity of 0.6 gallons per minute (GPM) of water at 60oFwith a pressure drop of 1 PSI (0.6 Cv).
Operational temperature range is 14 to 248 degrees Fahrenheit; -10 to +120 degrees Celsius. Suitable for outdoor use; not for use underwater.
Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel.
Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, water exchange for aquarium, air horn, or bleeding moisture from an air tank.
Manufactured in China. Model: USS2-00066. Quality assurance and/or conformity managed in accordance with standards:
ISO 9001:2000; GB/T 19001:2000; European EN61000-6-1:2001 and EN61000-6-3:2001.
8. 1/8" NPT 5 Way 2 Position Pneumatic Electric Solenoid ValveDC 12 V from U.S. SOLID
Feature
USE: Valve for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control a large device. It is also the interface between electronic controllers and pneumatic systems.SPECIFICS: Voltage for this valve is DC 12 V with an aperture of 1/8"NPT.
MATERIALS: Constructed of industrial grade aluminum alloy components with NBR (nitrile rubber) seal.
5 WAY 2 POSITION: This is a 5/2 valve which means it has 5 ports; 2 exhaust ports through which air is regulated as it flows out, 2 power ports that power the system, 1 supply port for the inlet of air pressure, and 2 flow positions.
GUARANTEE: We offer a 12 month money back guarantee. Feel free to contact our friendly staff. SHIPS FROM CLEVELAND, OHIO, USA - EXPEDITED SHIPPING AVAILABLE
Description
The USS-PSV00039 1/8" NPT 5 Way 2 Position Pneumatic Aluminum Electric Solenoid Valveis a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control a large device. It is also the interface between electronic controllers and pneumatic systems. This valve allows pneumatic control of position, flow, pressure and temperature. This is a 5/2 valve which means it has 5 ports; 2 exhaust ports through which air is regulated as it flows out, 2 power ports that power the system, 1 supply port for the inlet of air pressure, and 2 flow positions. This valve is made with an aluminum alloy and has an aperture of 1/8". Pneumatic types of valves can be found in a wide range of industries. They are used in Pneumatic Artificial Muscles (PAM) for robotics and automation. Manufacturing companies that use conveyors belts uses pneumatic valves in their conveyor belt systems. Food and beverage manufacturers use them to make, dispense or preserve food and beverage products. U.S. Solid pneumatic valves offer reliability, low power consuming, and long life. They have prewired connections which makes installation, maintenance, and control simple.Specifications:
Brand: U.S. Solid
SKU: JFPSV00039
U.S. Solid Model: USS-PSV00039
GTIN-12 (UPC) : 888107071846
Valve Type: 2 Position 5 Way
Thread Type: NPT
Operation/ Property: Normally Closed
Material: Aluminum Alloy
Size: 1/8"
Voltage: DC 12 V
Applicable Media: Filtered Air
Power Rating (W): 2.5
Effective Section Area (mm): 12
Flow Value (Cv): 0.67
Working Pressure: 0.15 ~ 0.8 Mpa
Direct Operated/ Pilot Operated: Pilot Operated
Operation Temperature: -5C ~ 50C
Wiring Form: Direct Lead Wire
Cable Length: 42cm/ 16.5"
9. 1/4" NPT 5 way 2 Position Pneumatic Electric Solenoid Valve DC 12 V
Feature
U.S. Solid Pneumatic Valve- Industrial Grade Product5/2 Valve with 1/4" NPT Aperture (inlet/outlet: A=B=P=1/4"; exhaust port: R=S=1/8")
Voltage: DC 12 V
Versatile, Small, Responsive, Light, and Durable
SHIPS FROM CLEVELAND, OHIO - EXPEDITED SHIPPING AVAILABLE
Description
Pneumatic types of valves can be found in a wide array of industries. The transportation industry has many uses for them; motorcycle & ATV air ride suspension systems, door opening systems on buses, and garbage truck lift mechanisms just to name a few. They are also found in air lift devices like forklifts. This is the U.S. Solid 1/4"NPT 5 way 2 Position Pneumatic Electric Solenoid Valve. It is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control a large device. It is also the interface between electronic controllers and pneumatic systems. This valve allows pneumatic control of position, flow, pressure and temperature. This valve is a 5/2 valve which means it has 5 ports; two 1/8" exhaust ports through which air is regulated as it flows out, two 1/4" power ports that power the system, 1/4" supply port for the inlet of air pressure, and 2 flow positions. This valve is made with an aluminum alloy and has an aperture of 1/4". U.S. Solid pneumatic valves offer reliability, low power consumption, and have a long life.Specifications:
Brand U.S. Solid
SKU: JFPSV00034
GTIN-12 (U.P.C.) 888107070917
U.S. Solid Model: USS- PSV00034
Valve Type: 2 Position 5 Way
Thread Type: NPT
Operation/ Property: Normally Closed
Size:: 1/4"
Voltage: DC 12 V
Applicable Media: Filtered Air
Effective Section Area (mm): 16
Flow Value (Cv): 0.89
Insulation & Protection: Class F; IP 65
Working Pressure: 0.15 ~ 0.8 Mpa
Max. Pressure Resistance: 1.2 Mpa
Direct Operated/ Pilot Operated: Pilot Acting
Operation Temperature: -5 ~ 50
<10. Baomain Pneumatic Air Control Solenoid Valve 4V210-08 DC24V 5 Way 2 Position PT1/4" Internally Piloted Acting Type Single Electrical Control
Feature
Product Name : Pneumatic Solenoid Valve; Model : 4V210-08; Operation Type : Internally Piloted Acting TypeType : 2 Position 5 Way; Power Consumption : DC 24V; Operating Pressure : 0.15 ~ 0.8MPa
Position & Way Number : Two-position, Five-way;Female Thread Port Diameter : 11.4mm / 0.448", 8.5mm / 0.334";Joint Pipe Bore : Inlet=Outlet=1/4''
Hex Connector Inner Dia(Approx) : 10.5mm / 0.41"; Total Size(Approx) : 11 x 6.6 x 2.2cm / 4.33" x 2.6" x 0.86" (L*W*H)
Weight : 205g; Package Content : 1 x Solenoid Valve
