If you looking for torque wrench low range then you are right place. We are searching for the best torque wrench low range on the market and analyze these products to provide you the best choice.
Best torque wrench low range
1. TEKTON 24330 3/8-Inch Drive Click Torque Wrench (10-80 ft.-lb./13.6-108.5 Nm)
Feature
Wrench emits that can be heard and felt when the preset value is reachedHigh-contrast dual-range scale is easy to read, even in low light
Reversible ratchet head drives in both directions and measures torque in clockwise direction
Durable all-steel construction has no plastic parts to break or wear out
Ships pre-calibrated to +/- 4% accuracy and ready to use
Description
TEKTON 24330 3/8-Inch Drive Click Torque Wrench (10-80 ft.-lb./13.6-108.5 Nm)2. TEKTON 24320 1/4-Inch Drive Click Torque Wrench (20-200 in.-lb./2.26-22.6 Nm)
Feature
Wrench emits that can be heard and felt when the preset value is reachedHigh-contrast dual-range scale is easy to read, even in low light
Reversible ratchet head drives in both directions and measures torque in clockwise direction
Durable all-steel construction has no plastic parts to break or wear out
Ships pre-calibrated to +/- 4% accuracy and ready to use
Description
Calibrated to an accuracy of +/ 4%, the TEKTON 1/4 in. Drive Click Torque Wrench lets you work with confidence, eliminating guessing and the common tendency to overtighten fasteners. Correctly tightening fasteners to a vehicle or equipment manufacturer's torque specifications ensures parts are properly secured without being damaged. Simple and easy to use, this wrench has a reversible ratcheting head that drives fasteners in both directions and measures torque in the clockwise direction. To measure torque, set the desired value on the handle scale (inch pounds or Newton meters) and begin tightening the fastener. When the preset torque value is reached, a reliable mechanical operation inside the handle produces a click you can hear and feel, alerting you to stop applying force. Built for consistent performance and years of dependable service, the mechanical design doesn't need batteries, and the allsteel construction has no plastic parts to break or wear out.
IMPORTANT: This wrench is shipped precalibrated and ready to use. To help maintain calibration, store at its lowest setting of 20 in.lb./2.2 Nm when not in use. Be sure to read and understand the operator's manual, including all safety information, before first use.
Specifications:
- Range - in.-lb.: 20-200 in.-lb.
- Range - Nm: 2.26-22.6 Nm
- Increment: 1 in.-lb. (0.113 Nm)
- Accuracy: 4 percent
- Length: 10-7/8 inch
- Ratchet: 24 tooth
- Country of Origin: Taiwan
Includes:
- (1) 1/4 in. drive torque wrench
- (1) Storage case
- (1) Operator's manual with torque conversion chart
3. TACKLIFE 1/4" Drive Click Torque Wrench (20-200 in.-lb./2.26-22.6 Nm) with 2.95-Inch Extension Bar, 3/8" Reducer - HTW4A
Feature
Professional & Precise Each torque wrench passed the calibration according to DIN-ISO-6789(international standard) within +/- 4% and certificated with individual test data and serial No.All-steel Construction All steel construction, sliver chrome coating with sand-blasting, black chrome coating for sleeve, it is durable and anti-rust. High-contrast dual-range scale makes it easy to read under low or strong light.
Clockwise & Counter-clockwiseReversible ratchet head drives in both directions and measures torque in clockwise direction.
Torque Preset Turn the handle to the required torque value, and then lock to avoid error during operation. "Click" emits when wrench reaches the preset torque, avoiding overloading.
Complete Wrench Set Come with extra 1/4"(F) to 3/8"(M) reducer, 1/4" socket extension bar in the plastic black case, the maximum torque value for 3/8" reducer is 170Nm, please use these within its specific torque value.
Description
Tacklife - Professional team on Amazon, which deals only with development of the tools.We commit ourselves to using qualitative tools to improve the quality of life.
Reliable & Professional
Every unit passed the calibration according to DIN-ISO-6789 (international standard) within +/- 4%, it is reliable and precise
With a calibration of +/- 4%, you can confidently apply the precise amount of fastener torque according to manufacturer specification
Easily set and lock your torque range with the bottom adjustable ring to avoid over or under tightening, a clear "click" sounds upon reaching the set torque
Durable and High Quality
The 24-tooth ratchet head was made from hardened treated Chrome Vanadium steel alloy (Cr-V), harder than regular ones
Fully constructed with chrome vanadium steel for durability and consistent performance
Treated with atomization process, it can protect your eyes from dazzling in a strong light
Easy & Convenient to use
The high contrast and dual-range scale make it convenient to read even in low light
Reversible ratchet head drives in both directions and measures torque in clockwise direction
Come with extra adaptor, reducer, socket and extension bar, it can be applied for more situation
With the protective case, it is easy for you to store it safely and carry around
Specifications:
Range - in.-lb.: 20-200 lb-in
Range - Nm: 2.26-22.6nm
Increment: 1 ft.-lb. (1.36 Nm)
Accuracy: +/- 4%
Length: 10-7/8 inch
Ratchet: 24 tooth
Country of Origin: Taiwan
Package Included:
1* Tacklife HTW4A 1/4-inch Drive Torque Wrench
1*1/4 in. drive(F) to 3/8 in. drive(M) adapter
1*1/4 in. drive impact socket extension bar
1* Certificate of Calibration
1* User Manual
1*Warranty Card
4. Performance Tool M195 0-80 in-lb. and 0-7 N-m Beam Style Torque Wrench, 1/4"
Feature
1/4'' Drive Torque Beam Wrench0-80 in/lbs. clockwise or counterclockwise measurement
Ball type handles that localize force, better ensuring accuracy
Deflection beam wrenches do not wear or fatigue over the lifetime of the tool, insuring better accuracy
Directly measure a variety of torque values when tightening fasteners
Description
The Performance Tool M195 features a Pointed, hard spring steel beam that gives precise readings while resisting bending; Torque measurements calibrated in SAE & Metric; Deflection beam torque wrenches do not wear or fatigue over the lifetime of the tool insuring increased accuracy; 60in/lbs. Maximum Torque; 0-80 Working Torque; 0-7 Newton meters; Accurate measurements Clockwise or Counterclockwise; Corrosion Resistant; High-Contrast Dual Range Scale (Easy to read in low light); Can be used for rear differential, gunsmithing, and preload on pinion bearings where a click type torque wrench won't cut it. Also use it while tightening seat post clamp on carbon fiber bicycles or torqueing plastic intake manifolds. Use the M195 when need to measure break away torque.5. RamPro 1/4 Drive Click Torque Wrench Low Range (20-200 in.-lbs./23-230 CM-KGs) | Micrometer Adjustable Ratcheting Bar with Click Stop Twist SAE/Metric Dial Gauge | Great for Cars/Bikes
Feature
The Ram-Pro Low Range Torque Measuring Chrome Wrench, gives the mechanic or electrician accessibility to tighten bolts and nuts ratcheting clockwise & counterclockwise while applying the most precise level of torque pressure desired, without overtightening when Hearing/Feeling the Ratchet Click.SPECS: Drive: 1/4" Square - Accuracy Tolerance: 4% - Dial Torque Range SAE/Metric: 20-200 in.-lbs./2.26-22.6 Nm - Increment: 1 in.-lb./.53 KG-CM - Wrench Weight: 1.12 lb. - Length: 11 inch - Width: 1.18" - Height 0.81" - Ratchet Gear Tooth's: 24 - Sturdy Black Plastic Storage Case Included - Complete Torque Conversion Chart with Instructions included.
ACCURACY & QUALITY: Made in Taiwan Factory Tested & Ships Pre-Calibrated accurate to +/- 4% Meeting ANSI, DIN & Federal Standards, to be used right out of box - Entirely Constructed of Chrome Plated Alloy Steel, ensuring no breaking or wearing out, and a Rust/Corrosion Resistant long lasting life - Heavy-Duty Cam & Pawl Mechanism is Micrometer Adjustable Measuring Torque accurately - Blow Molded Storage Case included.
DESIGN: Engraved High-Contrast Torque Range Scales measures Torques by in-lb. or CM-KGs (NM) precisely & Locks with Bottom Nut - Tangible Stop Click Notifies when Pre-Set Torque is reached - Reversible Switch toggles between clockwise & counterclockwise rotation - Detent Ball on Quarter inch driver securely Latches onto Sockets - Non-Slip Knurled Handle for a Comfortable Strong Grip.
USE FOR: Superior Bike Tool for Bicycle Repairs - A Great Hand-Held Spanner for Tightening (Loosening) Car/Truck Automotive, RV & Motorcycle Fastener Screws from Tire/Wheel Bearing Lug Nuts, Brake Pads, and Crankshaft Bolts to Cylinder Heads, Spark Plugs, Trailer Hitches and Engine Mountings - Perfect for AR Gun-smiting, Scope/Sight-Base Mounting - Excellent on Lug, Pan, Flare, Barrel, Caliper and Castle Male/Female Nuts.
Description
About The Ram-Pro CR-V 1-4 inch Drive Click Stop Ratchet Torque WrenchEver needed to tighten a set of bolts/nuts to a desired & recommended Torque, as when fixing vehicle engines or Repairing Bikes/Firearms, Precision is of course key to getting the job done right.Introducing:The Ram-Pro 1/4 in. Square Drive Click Type Micrometer Adjustable Torque Wrench, which is the go-to tool when precise leverage torque is needed.TQ with Confidence:
Wrench is pre calibrated to +/-4% accuracy for assured precisionYou Get:
1/4" Torque Wrench
Black Storage Case
User's Manual with Conversion TableSocket Holder:
Spring-loaded detent ball securely latches onto sockets, preventing Fall-Offs.Setting Torque:
Turn Knurled Handle with Horizontal Engraved Micro Graduations.
Also dial-able with a Hex Wrench for easier presetting.Dual Torque Range Scale:
20-200 Inch Pound
23-230 CM.KGS/KPS (2.26-22.6 Newton Meters)Increment Increase:
1 in-lb.
.53 KGS-CMConversion Table:
1 ft-lb=0.1383MKg=1.3556Nm
1 MKg=7.233ft-lb=9.806Nm
1 Nm=0.1019MKg=0.73756ft-lb
(Complete Conversion Chart included).Loud Tangible Micro-Clicker:
When Preset TQ is reached an Automatic Wrench Click Sound is Heard & Felt (for noisy environments), Do not pull further or you risk damaging the studs.Dual-Direction:
Ratchet works Clockwise & Counterclockwise to tighten & loosen cap heads.Black Storage Case:
Blow Molded Plastic Case is included for tool security, easy transport & efficient storage.Tip:
When Storing the Wrench, Dial it down to the lowest torque setting (don't turn handle below lowest torque setting).Excellent Tool for doing Auto Engine Work.DIY Gauge Tool for your Bike Repair.Make a Safer World Through Accuracy & Precision!
6. J&R Quality Tools 1/4-Inch Adjustable Torque Wrench, 200-Inch 1-Pound | Chrome Vanadium Steel
Feature
TRIED AND TESTED: 1/4" torque wrench includes wide range of torque settings to loosen and tighten bolts on cars, motorcycles and small engine repairTORQUE PRECISION: Machined factory tested and calibrated to +/- 4 percent
HARD-WEARING: Durable torque wrench is built tough with heat-treated Chrome Vanadium Steel construction
INCLUDES LOW TORQUE SETTINGS: 1/4" drive torque and ratchet includes hard-to-find lower torque settings
REVERSIBLE: 1/4" drive click torque wrench includes forward and reverse lock settings
Description
Need these instructions added to listing, having to many buyers not know how to use the item, these instructions should fix that. Please add the instructions to the product description, thanks INSTRUCTIONS: Please note at lower settings, you will not hear a load click, The best way to tell people who have not used this type of wrench is; First set the torque wrench to 120 or higher and test the unit, look for a click and feel for it. The higher the setting the more distinct the click. second look at the window on the side, you will see the clicker inside move when the torque setting is reached. The clicker is hitting a inside plate and is were the clicking sound comes from. third get a feel for the hand feel, you will feel the clicker engage, important for lower settings. then at lower settings you will notice the feel more than the click. this is normal for this low of torque settings wrenches. 20 inch pounds of pressure is not much so the clicker inside will only have that same force when hitting the side plate in the torque wrench. thanks, and hopefully this helps.7. Garage Ready Digital Torque Wrench - (4 to 22 ft-lbs) (48-264 in-lbs) (5 to 30 Nm) +/- 2% Accuracy with Limit Buzzer & LED Flash Notification and Peak Trace Tracking (1/4-Inch Drive)
Feature
SUPERIOR PERFORMANCE - 72 Gear Teeth for 5 Degrees per Ratchet click and ships pre-calibrated at 2% torque accuracy for range 4 to 22 ft-lbs. Great for Low torque applications like Bikes and Plastic Fasteners.EASY TO USE - Digital Backlit LCD Display, Simple Set-point via Push Button Control, Buzzer and Flashing LED to indicate Torque Setting Achievement.
ADVANCED FUNCTIONALITY - Torque units for (Nm / ft-lb / in-lb / kg-cm), 50 torque point memory with Peak and Trace capabilities.
TRUSTWORTHY - ISO 6789 Calibrated, Powered by 2 AAA batteries for 55 hours of operation, it has a reversible ratchet head to drive in both directions and measures torque in clockwise or counter clockwise use.
DURABLE - Steel construction with molded case has no torque springs to vibrate loose or wear out. No special storage between use.
Description
Calibrated to an accuracy of +/- 2%The Garage Ready -inch Drive Digital Torque Wrench enables you to tighten fasteners with confidence and provides precision measurements without the annoying limitations of traditional torque wrenches. An easy to read LCD display with torque modes for ft-lb., N-m, kg-cm and in-lb. ensure you get the job done without the confusion of conversion tables.
Walk away knowing that the tool did the job with a convenient flashing LED light and pulsing audio buzzer when within 20% of the target torque and an audible alert that buzzes for recognition of the perfect torque condition. Track your peak torque along with tracing your torque measurements. Store up to 50 different torque measurements to ensure you did the job according to the specifications.
We have added both a quick release and a reversible ratchet switch, making this the perfect tool for not only accuracy but for efficiency as well. Securely grab the ratchet on its anti-slip grip which makes it easy, safe and comfortable to use. This Digital Torque Wrench runs on just two (2) AAA batteries and allows it to be used for a staggering 55hrs. It's Digital, so no need to worry about breaking the calibration after incorrectly storing it away without releasing the spring pressure.
Specifications:
- Range - ft.-lb.: 1-22 ft.-lb.
- Range - Nm: 1.5-30 N-m
- Increment: 0.01 unit (ft-lb., N-m, kg-cm or in-lb.)
- Accuracy: 2 percent 4-22 ft-lbs or 5-30Nm
- Length: 7.87 inch
- Ratchet: 72 teeth
Includes:
- 1/4 in. drive digital torque wrench
- Storage case
- Operator's manual
We have fantastic customer service with great response rates and all our products are backed by Amazon's 30-Day return guarantee in addition to our 6-month manufacture warranty.
This is a perfect and must have accessory for your Garage!8. TEKTON 1/2" Drive Click Torque Wrench (10-150'.-Lb./13.6-203.5 Nm) | 24335
Feature
Wrench emits click that can be heard and felt when the preset value is reachedHigh-contrast dual-range scale is easy to read, even in low light
Reversible ratchet head drives in both directions and measures torque in clockwise direction
Durable all-steel construction has no plastic parts to break or wear out
Ships pre-calibrated to +/- 4% accuracy and ready to use
Description
Calibrated to an accuracy of +/ 4%, the TEKTON 1/2 in. Drive Click Torque Wrench lets you work with confidence, eliminating guessing and the common tendency to overtighten fasteners. Correctly tightening fasteners to a vehicle or equipment manufacturer's torque specifications ensures parts are properly secured without being damaged. Simple and easy to use, this wrench has a reversible ratcheting head that drives fasteners in both directions and measures torque in the clockwise direction. To measure torque, set the desired value on the handle scale (foot pounds or Newton meters) and begin tightening the fastener. When the preset torque value is reached, a reliable mechanical operation inside the handle produces a click you can hear and feel, alerting you to stop applying force. Built for consistent performance and years of dependable service, the mechanical design doesn't need batteries, and the allsteel construction has no plastic parts to break or wear out.
IMPORTANT: This wrench is shipped precalibrated and ready to use. To help maintain calibration, store at its lowest setting of 10 ft.lb./13.6 Nm when not in use. Be sure to read and understand the operator's manual, including all safety information, before first use.
Specifications:
- Range - ft.-lb.: 10-150 ft.-lb.
- Range - Nm: 13.6-203.5 Nm
- Increment: 1 ft.-lb. (1.36 Nm)
- Accuracy: 4 percent
- Length: 18-3/8 inch
- Ratchet: 24 tooth
- Country of Origin: Taiwan
Includes:
- (1) 1/2 in. drive torque wrench
- (1) Storage case
- (1) Operator's manual with torque conversion chart
9. Neiko 03711B 3/4-Inch Drive Adjustable Torque Wrench, 50 to 300-Feet-Pound Torque Range | Chrome Vanadium
Feature
PROFESSIONAL QUALITY: High quality, reversible 3/4" drive torque/ratchet includes a wide range of torque settings to loosen and tighten boltsTORQUE PRECISION: Machined factory tested and calibrated to +/- 4 percent, dial in torque settings with the embossed steel handle
SOLID BUILD: Constructed of very sturdy, heat-treated Chrome Vanadium steel
WIDE TORQUE SETTINGS: Includes a wide range of torque settings from 50-300 pounds and provides readings in foot-pound and Newton-meter
HEAR AND FEEL ACTION: Wrench clicks when torque value is reached and locking mechanism prevents accidental lapse during operation
Description
Use the dual range 50-300 foot-pound (100-500 Nm) NEIKO 3/4-Inch Drive Torque Wrench to prevent damages to parts or fasteners caused by over-tightening during assembly. This unit provides readings in foot-pounds and Newton-meters while the locking feature adjusts quick and easy. As you tighten fastener, you will hear and feel a "click" when pre-set torque value is reached. Our redesigned grip offers comfort while working and the all-steel construction, chrome moly ratchet head is corrosion resistant for durability. Specifications: Drive: 3/4 inch Ratchet: Cr-Mo, 24 tooth Length: 34-1/4 inch Dual Range: 50-300 foot-pound / 100-500 Nm Increment: 2.5 foot-found / 2.5 Nm Accuracy: +/- 4% IMPORTANT: Please read manual and all safety measures before use. Store at lowest setting when not in use.10. TEKTON 24340 1/2-Inch Drive Click Torque Wrench (25-250 ft.-lb./33.9-338.9 Nm)
Feature
Length : 26 inches;Width : 3 inches ;Height :2.5 inchesHigh-contrast dual-range scale is easy to read, even in low light
Reversible ratchet head drives in both directions and measures torque in clockwise direction
Durable all-steel construction has no plastic parts to break or wear out
Ships pre-calibrated to +/- 4% accuracy and ready to use
