If you looking for pvc valves and fittings then you are right place. We are searching for the best pvc valves and fittings on the market and analyze these products to provide you the best choice.
Best pvc valves and fittings
1. Homewerks VBV-P40-E3B Ball Valve, PVC Schedule 40, Solvent x Solvent, 1/2-Inch
Feature
150 PSI at 73 Degrees FEPDM seat seals and o-rings
Fits both Schedule 40 and 80 pipe
Slip ends comply with ASTM D2466
Meets ANSI / NSF 14 for Plastic Piping System Components
Description
It is used for cold water pressure distribution systems in residential, commercial, agricultural and light industrial applications. This NSF-approved valve features EPDM seats and O-rings and is constructed from durable PVC material. Ideal for applications where space and weight are critical considerations. 1/2" White PVC schedule 40 solvent ball valve NSF approved Rated for 150 psi @ 73 degrees fahrenheit Epdm seats Epdm O-rings Fits both schedule 40 & 80 pipe Solvent ends comply with ASTM D2466.2. Mueller 107-133/HC Ball Valve, X 1/2" F
Feature
Rated for 150 PSI at 73-Degree - For use with cold-water applicationsWhite color - TPV seats - NBR O-rings
Fits both schedule 40 and 80 pipe
Threaded ends comply with ANSI B1.20.1
Certified to NSF 61-G - "Lead-Free" Compliant
Description
Since their beginning in 1917 as the Mueller Metals Co. and later Mueller Brass Co., Mueller Industries has built a well-earned reputation for offering the finest-quality plumbing, HVAC, refrigeration and industrial products in the industry.3. Proline 107-633 PVC Ball Valve, 1/2", White
Feature
For use in cold water applicationsSolvent ends
150 pounds per square inch
Description
Since our beginning in 1917 as the Mueller Metals Co. and later Mueller Brass Co., Mueller Industries has built a well-earned reputation for offering the finest-quality plumbing, HVAC, refrigeration, and industrial products in the industry.4. homewerks worldwide llc 117-8-12-12b 1/2", Push Fit, PVC Ball Valve
Feature
For hardware purposesDescription
1/2", Push Fit, PVC Ball Valve, Use Without Solvents, Fits Both Schedule 40 Schedule 80 Pipe, Quarter Turn Operation, 150 PSI At 73 Degrees, Meets ANSI, NSF 61-9.5. GF Piping Systems PVC True Union Ball Valve with Full Port, Two Piece, PTFE Seat, EPDM Seal, 1/2" Socket/NPT Threaded
Feature
PVC body for less weight than valves made from metalsTrue union construction for in-place valve replacement
Full port flow for higher operating efficiency than standard port
Inline valve for connecting two pipes going in the same direction
Socket weld connections to allow for a smooth bore and better fluid flow
Description
The GF Piping Systems type 375 two-piece ball valve has a PVC (polyvinyl chloride) body that weighs less than valves made from metals, and it has EPDM (ethylene propylene diene monomer) O-rings for good resistance to weathering, ozone, UV, electricity, oils, water, steam, and some solvents. The PTFE (polytetrafluoroethylene) seat resists chemicals, moisture, and high temperatures. This valve connects two pipes going in the same direction and has true union connections that allow in-place valve replacement. It has a full port for reduced friction; the inner diameter of the valve is the same as the inner diameter of the pipes it connects to enable maximum operating efficiency. This valve includes socket weld connections with an internal recess on each inside diameter to allow for a smooth bore and better fluid flow. Valves in sizes 3/8" through 2" also include National Pipe Taper (NPT) threaded connections, which create tighter seals than straight threads. It is pressure rated to 232 pounds per square inch (psi) at 72 degrees Fahrenheit (F) using the socket connections and is pressure rated to 150 psi at 72 degrees F using the NPT threaded connections. The ergonomic manually operated handle for turning the valve on and off has an integrated tool for adjusting the union bushing. This valve complies with NSF International/American National Standards Institute (NSF/ANSI) 14 and 61 standards for potable water. It is used in non-critical chemical applications, water treatment, and swimming pools.
Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve and is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter or the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and termed reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the balls position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.
GF Piping Systems manufactures piping components and systems for gas and water distribution. The company, founded in 1802 and headquartered in Schaffhausen, Switzerland, meets International Organization for Standardization (ISO) standards 9001:2008 and 14001:2004.
6. Genova Products 30407CP 3/4-Inch Male Iron Pipe Thread PVC Pipe Adapter Slip by Male Iron Pipe Thread - 10 Pack
Feature
Male adapterAdapts pressure pipe to standard female pipe threads
Thread seal tape is recommended for threaded joints
Adapts pressure pipe to standard female pipe threads and Teflon thread tape is recommended for threaded joints
Conveniently packaged in quantities of 10
Ideal for irrigation and underground residential sprinkler systems
Schedule 40 Pressure Fitting
Made in the USA
Description
Male adapter; Adapts pressure pipe to standard female pipe threads; Thread seal tape is recommended for threaded joints.7. NDS EBV-0500-T 1/2-Inch Threaded PVC Schedule 40 Economy Ball Valve, White
Feature
Made in the USA with High Quality ProGuard PVC II materialNSF certified to be drinking water safe and low lead approved
UPC/IAPMO listed
Pressure rated to 150 psi at 73F Degree
Details and certifications available www.kbico.com
Description
' Ball Valve, Body Material PVC, Body Style Inline, 1-Piece, Pipe Size 1/2 In., Connection Type FNPT x FNPT, Full Port, Max. Pressure 150 psi CWP, Temp. Range 33 Degrees to 140 Degrees F, Ball Material Acetal, Seat Material PVC, Stem Type Blowout Proof, Handle Type Tee, Handle Material ABS, Stem Material Acetal, Body Seal Material EPDM '8. NDS GVG-0750-S 3/4-Inch Slip PVC Schedule 80 Gate Vale, Gray
Feature
Made in the USA with quality PolyOne Schedule 80 PVC II materialNSF certified to be drinking water safe and low lead approved
UPC/IAPMO listed
Pressure rated to 150 psi at 73F Degree
Details and certifications available at the website
Description
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards.9. Homewerks VBV-P80-B3B Ball Valve, PVC Schedule 80, Female Thread x Female Thread, 1/2-Inch
Feature
150 PSI at 73 Degrees FEPDM seat seals and o-rings
Fits both Schedule 40 and 80 pipe
Threaded ends comply with ANSI B1.20.1
Description
It is used for cold water pressure distribution systems in residential, commercial, agricultural and light industrial applications. This NSF-approved valve features EPDM seats and O-rings and is constructed from durable PVC material. Ideal for applications where space and weight are critical considerations. 1/2" Gray PVC schedule 80 threaded ball valve Nsf approved Rated for 150 psi @ 73 degrees fahrenheit seats Epdm O-rings Fits both schedule 40 & 80 pipe Threaded ends comply with ANSI B1.20.1.10. American Valve RC40 1-1/2" x 1-1/2" Flexible Pvc Coupling
Feature
For connecting drain, waste, and vent (dwv) pipeMade of flexible PVC and resistant to household chemicals
Stainless steel bands for easy installation
Perfect for cut-ins and repairs
Certified by IAPMO (UPC) and CSA to US and Canadian Plumbing code standards
For connecting drain, waste and vent (DWV) pipe
