If you looking for prop and scenery lights then you are right place. We are searching for the best prop and scenery lights on the market and analyze these products to provide you the best choice.
Best prop and scenery lights
1. 5 Pack Black Light Micro Effects Light 405nm Violet LED Mini Blacklight with 9V Battery Clip for Props Scenery Fluorescent Paints Theatrical Costumes UV Glow Inks
Feature
Miniature black light LED in the 405nm visible violet. Narrow light beam provides strong glow of fluorescent materials in dark environmentsLight body material is black plastic, with a 2.1mmm x 5.5mm size DC barrel connector jack center positive. Included 9V battery clips to DC barrel connector plug harness
Provides black light glow to various fluorescent scenery paints and other materials. Uses include building of props and scenery where a small black light source is needed
Overall length of light and battery clip assembly is 8 inches nominal, the battery clip wire length is 5 inches nominal
LED black light operates from 9V or 12V DC power. Batteries are not included. Made in China
Description
This kit has 5 pieces of the MEL-BL (Micro Effects Light, Blacklight) that operates from a 9V battery with included battery clip that has a DC barrel connector plug that attaches to the light body. These micro effects lights use a 405mm high output violet LED with a narrow spotlight pattern. These lights provide for a strong glow of ultraviolet fluorescent paints in dark settings. The violet 405nm wavelength light is at the edge of the visible light spectrum just outside of the UVA ultraviolet energy band. This wavelength allows a high amount of violet light output that works well with many fluorescent materials such as paints, tapes, and inks to produce a strong glow. The black plastic body of the micro effects light is textured and can be adhered to surfaces with hot glue or gaffers tape for building props and scenery. The light uses a common 2.1mmx 5.5mm DC barrel connector. Operating time from a new 9V battery is typically greater than 24 hours. The violet LED black light projects a beam of light that is narrow focused and can produce a glow of various materials at a distance of several feet in a dark room. The MEL-BL (Micro Effects Light, Blacklight) is a professional use prop and scenery lighting device. The MEL-BL can be operated from 12 volts DC which provides a slight increase in light output but reduces overall life longevity of the light. These 405nm violet lights have no visible white light glow often found with 365mm LED ultraviolet sources. Uses include: themed entertainment projects Illuminate fluorescent painted props viewing UV invisible ink lighting fluorescent gaffers tape checking UV hand stamp inks stage props and scenery theatrical costumes lighting decorative fluorescent papers stage markers The additional images show the 405nm LED micro effect blacklight illuminating, pink, green, orange, and yellow florescent spray paint on tissue paper from a distance of about 2 feet.2. fire effect ember orange flame simulation LED light kit with flicker effects control for props theatrical scenery faux flame and glowing coal baskets
Feature
Ember Orange 1,000 Kelvin polychromatic LED bulbFlicker Effects Control with 6 dynamic modes and 10 speed steps
Great for simulated fire effect props - campfires - coals - embers
Includes 8 AA cell 12 volt battery holder (batteries not included)
For props theatrical scenery and themed entertainment projects
Description
The SBL2-EO (Ember Orange) LED bulb in this kit is designed specifically for simulated fire in specialty lighting projects. The kit includes the EEL1 (Enhanced Effects Light) cable socket, FEC1 (Flicker Effects Control), and battery holder for 8 AA cells. This kit provides a dynamic flame ember orange flicker lighting effect. Typical applications are fire simulation props, and scenery needing a coal or ember glowing fire look. Multiples kits can be used for an increased dynamic fire effect and/or for higher light output. The flicker effects control, or flicker generator, can be set for any of six dynamic flicker modes each mode comprising a different flicker pattern. The control may also be set at any of the 10 flicker rates. When set at a slow rate the effect is soft glowing coal or embers. When set at a rapid rate, the effect is simulated fire. The control also has one static dimming mode. The SBL2-EO (Silicone Bi-pin Lamp, Ember Orange) is a bulb that uses a total of 24 LEDs and measures 1.125" tall 0.5" diameter ... Additive color mixing of 12 yellow and 12 red LEDs is used to produce the ember orange glowing fire color that is polychromatic with a dominant wavelength of 605nm. The light output is a nominal 19 lumens at a 1,000 Kelvin nominal color temperature. Operating time from 8 AA cell batteries can be expected to be greater than 12 hours. The overall length of the bulb cable socket control and battery holder assembly is 36 inches nominal. Batteries not included. Application Western themed camp fire scenery props Theatrical stage simulated fire Themed entertainment projects Jack-o-lantern decor Faux fireplace building Coal basket props Cowboy cauldron fire pit props Glowing coal & wood ember fire simulation Blacksmith coal forge stage props Flicker flame torch props Flickering lantern props Amusement show projects3. Candle Flame Light Led Kit with Fire Flicker Effects for Props Theatrical Scenery Torches Lanterns
Feature
Dual voltage kit operates on either 9 volt battery or 12 volts DC; a battery holder for 8 AA cell batteries is in the kit (batteries not included). Tis kit operates on DC voltage only.The included FEC1 flicker effects control provides 6 dynamic effects modes and one static dimming mode. The control provides 10 flicker speeds.
The candlelight spectrum LED provides an ultra warm 1,722 Kelvin color temperature nominal light with a nominal 90 CRI (Color Rendering Index) for realistic flame simulation. Operating at 9V provides a 13 lumen nominal light output while operating at 12 volts provides a 24 lumen nominal light output.
This kit is used for building theatrical candle props, prop lanterns, and other theming uses such as in escape rooms.
he silicone candle shaped light dome is 1 inch tall and the overall length of the entire assembly with the battery holder is 34 inches nominal. The distance from the base of the light dome to the center of the flicker control is 16 inches nominal. Kit made in China.
Description
This is a LED candle flame effects light kit for operating from multiple power sources. This kit operates on a 9 volt battery for hand props such as theatrical candles and handheld lanterns. The light and control will also operate from 12 volts DC. A battery holder for 8 size AA cell batteries for 12V operation is included along with a 9 volt battery clip that attaches to the battery holder or onto a 9 volt battery. The light output is higher when operated from 12 volts. The flicker effects control provides multiple flame flicker simulation modes. The candle flame effects light has a flame shaped silicone dome. The color temperature of the light is 1,722 Kelvin nominal with a typical 90 CRI (Color Rendering Index). The total length of the bulb socket cable, flicker control, and battery holder assembly is 34 inches. This is a lighting kit used for building props and scenery needing a candlelight flame appearance. The flicker effects control provides 6 dynamic effects modes and one static dimming mode. The CFL1 is mated with an EEL1 cable socket that is designed to be press fit into rigid foam, wood, or other soft materials. The components of the kit use DC barrel connectors 2.1mm x 5.5mm size for connections. The CFL (Candle Flame Light) LED has a power of 0.54 watts Typ. at 9 volts DC with 13 lumens nominal light output and at 12 volts DC 1.38 Typ. watts with a light output of 24 lumens. When operated from a new 9V battery, the operating time of the kit is expected to be more than 8 hours. Applications: Handheld prop candles and lanterns Theatrical candles Kerosene Lantern and torch props Gas lamp replicas Filmmaking props Escape room lighting Western lantern props Themed Entertainment Fake flames4. CHAUVET DJ BOB LED Simulated Flame Effect
Feature
Simulated flame effect with no heatContinuous operation (no duty cycle)
Includes 3 legs for table support and chain for suspension
Dimensions (with legs): 31" H x 14" W x 14" D / Dimensions (with chain): 30" H x 12" W x 12" D
Description
There's no heat or flame but the BOB LED simulated flame sure looks real. The effect is created by 54 orange and 12 blue LEDs.5. 5 Pack, Blue LED 9 Volt Battery Operated Micro Effects Light for Scenery Props and Models
Feature
The LED lens is clear with a 30 degree output angle for a narrow beamBatteries not included
Color blue 467nm Typ. 5,000 mcd Typ.
5 pack lights and battery clips
MEL Light Body shell: ABS (black), length 1.42" ref. x 0.48" dia. Ref.
Description
The MEL (Micro Effects Light) is a series of simple low cost LED light sources with a built in DC barrel type connector. The 2.1 x 5.5mm barrel connector is very common for many low voltage DC power applications simplifying the building of a micro effects lighting system in a modular fashion. The MEL operates from 9 - 12 volts DC which allows a simple effects system operating from a 9 volt battery possible. The MEL is optimized for high light output at 9 volts DC with a nominal power of 0.18 watts operating at 20ma ref. Well suited for various LED lighting applications such as: scenery, props, models, animatronics, robotics, fx- special effects, and costumes. This kit includes 5 pcs blue MEL light and 5 pcs 9 volt battery clips with 5" ref wire leads. The overall length of the light and the clip is 8" ref.6. 5 Pack, Warm White Led 9 Volt Battery Operated Micro Effects Light for Scenery Props and Models
Feature
The LED lens is clear with a 30 degree output angle for a narrow beamBatteries not included
Color warm white 3,200 kelvin Typ. 4 lumen ref.
5 pack lights and battery clips. COO: China
MEL Light Body shell: ABS (black), length 1.42" ref. x 0.48" dia. Ref.
Description
The MEL (Micro Effects Light) is a series of simple low cost LED light sources with a built in DC barrel type connector. The 2.1 x 5.5mm barrel connector is very common for many low voltage DC power applications simplifying the building of a micro effects lighting system in a modular fashion. The MEL operates from 9 - 12 volts DC which allows a simple effects system operating from a 9 volt battery possible. The MEL is optimized for high light output at 9 volts DC with a nominal power of 0.18 watts operating at 20ma ref. Well suited for various LED lighting applications such as: scenery, props, models, animatronics, robotics, fx- special effects, and costumes. This kit includes 5 pcs warm white MEL light and 5 pcs 9 volt battery clips with 5" ref wire leads. The overall length of the light and the clip is 8" ref.7. 10 pack micro effects lights warm white LED operates on 9 volt battery mini spotlight for props scenery
Feature
The LED lens is clear with a 30 degree output angle for a narrow beamBatteries not included (uses 9 Volt battery)
Color warm white 3,200 kelvin Typ. 4 lumen ref.
10 pack lights and battery clips. COO: China
MEL Light Body shell: ABS (black), length 1.42" ref. x 0.48" dia. Ref.
Description
The MEL (Micro Effects Light) is a LED light sources with a built in DC barrel type connector and a 3mm LED with a narrow spotlight beam. The 2.1 x 5.5mm barrel connector is very common for many low voltage DC power applications. The LED provides a warm white light at 3200 Kelvin. The MEL is optimized for high light output at 9 volts DC with a nominal power of 0.18 watts operating at 20ma ref. Well suited for various LED lighting applications needing a simple prewired light source such as: scenery, props, models, animatronics, robotics, fx- special effects, Gaffer's or Grips tool mini flashlight, stage markers, and music stands. The plastic body of the light may be temporarily secured in position with Gaffers tape.This kit includes 10 pcs warm white MEL light and 10 pcs 9 volt battery clips with 5" ref wire leads. The overall length of the light and the clip is 8" ref.8. 3 Pack Black Light Special Effects Ultraviolet led Bulbs 12 Volts dc with Cable Socket dc Barrel Connector for Themed environments Props Theatrical Scenery Fluorescent Paints Plastics pigments
Feature
3 pack special effects LED black lights for illuminating fluorescent paints, plastics, and pigments used in prop and scenery projects for themed entertainment.Low voltage 12 volts DC with cable socket. Socket mounts into 7/16" hole in rigid foam wood and other similar prop and scenery materials.
24 LEDs with UVA blacklight output encased in a clear silicone rubber G4 style Bi-Pin bulb 1.5 to 2 watt nominal power, for 12 volts DC only
Cable end has 2.1mm x 5.5mm DC barrel connector, cable with socket length is 10.5" nominal. Parts made in China.
Ultraviolet light in the UVA region, black light with low hazard potential, avoid directly viewing the light sources for a prolonged time.
Description
The EEL1-SBL2-BL black lights have varied uses in building props and scenery for themed entertainment and special effects projects. These lights use 24 LEDs in the 390nm to 395nm peak wavelength ultraviolet UVA blacklight region, the LEDs are encased in a clear silicone resin bulb. The molded silicone bulbs have a nominal height of 1.1" and a nominal diameter of 0.5". The bulbs are for 12 volts DC power sources. The bulbs are non-polarized and are a standard G4 bi-pin style. The lights when operated at 12 volts DC have a nominal power of 1.5 to 2 watt. The bulbs are paired with a mating cable socket assembly. The EEL1 (Enhanced Effects Light) cable socket assembly has a G4 socket at one end and a standard DC barrel connector of the 2.1mm x 5.5mm size on the other. The length of the EEL1 cable socket is 10.5" and the overall length of the bulb cable socket with the bulb installed is 11.5" nominal. The socket is designed to press fit mount into a 7/16" hole in various materials such as rigid foam or wood. The DC barrel connector end of the cable socket can pass through a 7/16" hole while the taper body of the socket end can be press fit into the hole. The taper fit of the socket body locks it into place. The flange on the front of the socket is 5/8" diameter and limits the insertion depth. The EEL1-SBL2 lamp cable socket assemblies are general purpose low voltage lights that find applications in a variety of prop, scenery projects, special effects, and themed entertainment projects. They are easy to integrate into various creative settings and may be powered from 12-volt DC battery packs or 12-volt DC lighting power supplies. Application: Adding black light effects to HDU (High Density Urethane) foam themed environment pieces Theatrical stage scenery set pieces need a fluorescent scenic paint black light effects appearance Theme park character costumes need a blacklight glow effect9. 2 pack ember orange fire effect flame simulation LED light kit with flicker effects control for campfire props theatrical scenery fake flames glowing coals
Feature
2 pack kit with Ember Orange 1,000 Kelvin polychromatic LED bulbFlicker Effects Control with 6 dynamic modes and 10 speed steps
Great for fake fire effect props - campfire props - coals - embers
Includes 8 AA cell 12 volt battery holder (batteries not included)
The flicker control provides pseudo-random flicker patterns that cause a rising and falling of the light intensity. The light always has a level of output in the 6 different flicker patterns.
Description
2 pack kit for professional fire special effects lighting. The SBL2-EO Ember Orange LED bulb in this kit is designed specifically for simulated fire in special effects lighting projects. The kit includes 2 pieces EEL1 (Enhanced Effects Light) cable socket, 2 pieces FEC1 (Flicker Effects Control), and 2 pieces battery holder for 8 AA cells. This kit provides a dynamic flame ember orange fire flicker lighting effect. Typical applications are fire simulation props, and scenery needing a coal or ember glowing fire look. Multiples kits can be used for an increased dynamic fire effect and/or for higher light output. The flicker effects control, or flicker controller, can be set for any of six dynamic flicker modes each mode comprising a different flicker pattern. The control may also be set at any of the 10 flicker rates. When set at a slow rate the effect is soft glowing coal or embers. When set at a rapid rate, the effect is simulated fire. The control also has one static dimming mode. The SBL2-EO (Silicone Bi-pin Lamp, Ember Orange) is a bulb that uses a total of 24 LEDs and measures 1.125" tall 0.5" diameter ... Additive color mixing of 12 yellow and 12 red LEDs is used to produce the ember orange glowing fire color that is polychromatic. The light output is a nominal 19 lumens at a 1,000 Kelvin nominal color temperature. Operating time from 8 AA cell batteries can be expected to be greater than 12 hours. The overall length of the bulb cable socket control and battery holder assembly is 36 inches nominal. The kit components use DC barrel connectors of the 2.1mm x 5.5mm size with a center positive polarity. Batteries are not included. Application Western themed campfire scenery props Theatrical stage simulated fire Themed entertainment projects Lighted Jack-o-lantern props Faux fireplace building Pirate lanterns Glowing coal & wood ember fire simulation Pumpkin props Flicker flame torch props Flickering lantern props10. LUMAND 10 Pack Uv Mini LED Flashlight Keychain Torch Light Lamp Id Currency Passports Detector (10Pcs, Purple)
Feature
Micro size - goes anywhere you goIncredibly bright - visible over one mile!
Dual function On/Off switch & squeeze button
Unbreakable LED lamp
Pack of 10 units, NOTE: This keychain release uv light, if you want white light, you could click this link to purchase it. https://amzn.to/2Q3rcQH
Description
Features:<1>Popular key chain design LED light lamp
<2>Handy LED micro-lights fit handily on your key chain and weigh about as much as one of your keys
<3>Visible at over one mile in clear weather, you'll never be alone in the dark
<4>Great gadgets for dark parking areas, Camping/Hunting/Hiking,Emergency use
<5>With keychain, put it with your keys, take anywhere you like
<6>Have on/off switch in the keychain.
<7>Perfect for your portable carry-on tool or for your friends gift.
Package Included:
10Pcs/lot Purple LED Mini Keychain Light Lamp
