If you looking for nano arduino then you are right place. We are searching for the best nano arduino on the market and analyze these products to provide you the best choice.
Best nano arduino
![ARDUINO Nano [A000005]](https://images-na.ssl-images-amazon.com/images/I/41fz9mFQJjL.jpg)
1. ELEGOO Nano Board CH 340/ATmega+328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)
Feature
You could download the driver of Elegoo Nano V3.0 at: http://bit.ly/2jKlJMOThe Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino, so pls. use the driver from above link.
It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
Description
The Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino/Genuino UNO, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.You could download the driver of Elegoo Nano V3.0 at: http://bit.ly/2pMF4in
Technical specs
Microcontroller: ATmega328
Architecture: AVR
Operating Voltage: 5 V
Flash Memory: 32 KB of which 2 KB used by bootloader
SRAM: 2 KB
Clock Speed: 16 MHz
Analog I/O Pins: 8
EEPROM: 1 KB
DC Current per I/O Pins: 40 mA (I/O Pins)
Input Voltage: 7-12 V
Digital I/O Pins: 22
PWM Output: 6
Power Consumption: 19 mA
PCB Size: 18 x 45 mm
Weight: 7 g
Package Include :
3 X Nano Board
ATTENTION:
We dont have USB cables in this kit and you will need to buy a mini USB cable to use this NANO board.
2. Longruner Mini Nano V3.0 ATmega328P 5V 16M Micro Controller Board Module for Arduino (10Pcs)
Feature
CH340G Replace FT232RLMicro-controller ATmega328P
Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power.
Support for external 5V ~ 12V DC power supply; Support power supply by 9V battery.
Arduino Nano V3.0 ATMEGA328P Improved version with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers).
Description
Longruner Mini Nano V3.0 ATmega328P 5V 16M Micro Controller Board Module for Arduino Operating Voltage(logic level): 5V 8 analog inputs ports: A0 ~ A7 14 Digital input / output ports: TX,RX,D2 ~ D13 6 PWM ports: D3, D5, D6, D9, D10, D11 1 pairs of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is boot loader installed in it Support USB download and Power Support for external 5V ~ 12V DC power supply Support power supply by 9V battery Package content: 10 x Nano V3.0 with ATMEGA328P Module 20 x 15 pin headers 10 x 6 pin headers3. Emakefun for Arduino Nano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller Board with USB Cable (Pre-soldered Nano 5pcs)
Feature
CH340G Replace FT232RL,so pls. use the driver from this link:https://github.com/emakefun/emakefun-nano-kitTheUpgradedEmakefun Nano is a small, complete, breadboard-friendly andhigh qualityboard based on the Atmega328P-AU MCU.Adopting Immersion Gold Technology. Support ISP download, USB download and USB Power
No Soldering needed.TheUpgradedEmakefun Nano improved the design of PCB to solve the issue that the pins of Nano can't fit to breadboard perfectly. When you use our upgraded Nano, you will find the Pins arealigned nicely with the holes of breadborad
Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. We use high quality PCB original material and iproved produce technology to make sure every board has smooth edge and more reliable quality
It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). Follow this link:https://github.com/emakefun/emakefun-nano-kit/blob/master/Resume_Arduino_BootLoader.pdf, you can easily solve the problem that the nano board cannot download the program when it is connected to the computer.
Description
Specification: CH340G Replace FT232RL. Operating Voltage(logic level): 5V. 8 analog inputs ports:A0 ~ A7. 14 Digital input / output ports:TX,RX,D2 ~ D13. 6 PWM ports:D3, D5, D6, D9, D10, D11. 1 pairs of TTL level serial transceiver ports RX / TX. Support USB download and Power. Support for external 5V ~ 12V DC power supply. Support power supply by 9V battery. Support ISP download. Package including: 5 x Arduino Nano V3.0 with ATMEGA328P Module (welded) 1 x USB Cable4. For Arduino Nano V3.0,Keywish Mini V3.0 USB Nano ATmega328P 5V 16M Micro Controller Board Welded Module (5PCS)
Feature
Micro-controller ATmega328P, using Atmel Atmega328P-AU MCU; Improved version with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers)Support USB download and Power.
Support for external 5V ~ 12V DC power supply.
Support power supply by 9V battery.
CH340G Replace FT232RL,so pls. use the driver from this link:https://github.com/keywish/arduino-nano-kit
Description
Specification: -CH340G Replace FT232RL. -Operating Voltage(logic level): 5V. -8 analog inputs ports:A0 ~ A7. -14 Digital input / output ports:TX,RX,D2 ~ D13. -6 PWM ports:D3, D5, D6, D9, D10, D11. -1 pairs of TTL level serial transceiver ports RX / TX. -Support USB download and Power. -Support for external 5V ~ 12V DC power supply. -Support power supply by 9V battery. -Support ISP download. Package including: 3 x Arduino Nano V3.0 with ATMEGA328P Module5. LAFVIN Nano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller Board for Arduino (Nano x 3 with USB Cable)
Feature
Original ATmega328P CH340 chip is used. Improved new version CH340G Replace FT232RL.LAFVIN Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system.
Works the same as original Nano, runs perfectly on Arduino IDE.
Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power.
LAFVIN Nano CH340 controller is a compact board similar to the UNO, smaller and breadboard-friendly than Diecimila.
Description
Specification:
CH340G Replace FT232RL.
Operating Voltage(logic level): 5V.
8 analog inputs ports:A0 ~ A7.
14 Digital input / output ports:TX,RX,D2 ~ D13.
6 PWM ports:D3, D5, D6, D9, D10, D11.
1 pairs of TTL level serial transceiver ports RX / TX.
Support USB download and Power.
Support for external 5V ~ 12V DC power supply.
Support power supply by 9V battery.
Support ISP download.
Package including:
3 x LAFVIN Nano V3.0 with ATMEGA328P Module
3 x USB Cable
6. ELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P with USB Cable, Compatible with Arduino Nano V3.0 (Nano x 1 + Cable)
Feature
You could download the driver of Elegoo Nano V3.0 at: http://bit.ly/2jKlJMOThe Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino, so pls. use the driver from above link.
It is a smallest, complete, and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper.
Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
Description
The Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino/Genuino UNO, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.You could download the driver of Elegoo Nano V3.0 at: http://bit.ly/2pMF4in
Technical specs
Microcontroller: ATmega328
Architecture: AVR
Operating Voltage: 5 V
Flash Memory: 32 KB of which 2 KB used by bootloader
SRAM: 2 KB
Clock Speed: 16 MHz
Analog I/O Pins: 8
EEPROM: 1 KB
DC Current per I/O Pins: 40 mA (I/O Pins)
Input Voltage: 7-12 V
Digital I/O Pins: 22
PWM Output: 6
Power Consumption: 19 mA
PCB Size: 18 x 45 mm
Weight: 7 g
Package Include :
1 X Nano Board
1 x USB cable
7. Micro Controller Board, MACTISICAL 10Pack Upgraded Mini USB Nano V3.0 ATMEGA328P 5V 16M Micro Controller Board Module for Arduino (10 Pack, Nano V3.0 ATMEGA328P Module)
Feature
WELL MADE- The upgraded version of the Arduino Mini Pro is a micro controller circuit board.SPECIAL DESIGN - Nano V3.0 ATMEGA328P Improved version with 3pcs pin headers 2pcs 15pin headers +1pcs 6pin headers, no welding needed.
DURABILITY- In ensuring the performance of the NANO unchanged and the main control chip ATMEGA328P - AU invariable premise, we replaced the USB chip, improved the download speed and the stability of the win7 win8.
HIGH TRANSMISSION - High speed downloading, great stability,14 digital input / output pins (6 of which can be used as PWM outputs), 8 analog inputs, a 16MHz resonator, a reset button, and a mounting hole header.
BETTER COMPATIBILITY - Using Atmel Atmega328P-AU MCU, support ISP download, support USB download and Power.
Description
100% Brand new and Premium Professional Grade MACTISICAL Mini USB Nano V3.0 ATMEGA328P 5V 16M Micro Controller Board Module for Arduino.
Specification
- CH340G replace FT232RL - Operating Voltage(logic level): 5V - 8 analog inputs ports: A0 ~ A7 - 14 Digital input/ output ports:TX,RX,D2 ~ D13 - 6 PWM ports: D3, D5, D6, D9, D10, D11
Features
1 pairs of TTL level serial transceiver ports RX/ TX Using Atmel Atmega328P-AU MCU Support USB download and Power Support ISP download Support for external 5V ~ 12V DC power supply Support power supply by 9V battery
Installation
There is boot loader installed in it CH340G Driver Download link: http://www.wch-ic.com/download/list.asp?id=126 or http://www.5v.ru/ch340g.htm IDE of arduino Download link: http://arduino.cc/en/Main/Software
Package Content:
10 Nano V3.0 ATMEGA328P Micro-controller Board
20 Single Row Pin Header(15 pins)
10 Double Row Pin Header(3 pins)
8. Emakefun for Arduino Nano V3.0, Micro USB Nano Board ATmega328P 5V 16M Micro-Controller Board (5PCS)
Feature
Emakefun Nano used common Micro-USB instead of Mini-USB.6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Emakefun Nano is a small, complete, breadboard-friendly andhigh qualityboard based on the Atmega328P-AU MCU.Support ISP download, USB download and USB Power
Emakefun Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino,so pls.use the driver from this link:https://github.com/emakefun/emakefun-nano-kit
We used high quality PCB original material and Immersion Gold Technology to make sure every board has smooth edge and more reliable quality to make sure every board has smooth edge and more reliable quality
Nano's got the breadboard-ability of the Boarduino and the micro+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)
Description
Specification: CH340G Replace FT232RL. Operating Voltage(logic level): 5V. 8 analog inputs ports:A0 ~ A7. 14 Digital input / output ports:TX,RX,D2 ~ D13. 6 PWM ports:D3, D5, D6, D9, D10, D11. 1 pairs of TTL level serial transceiver ports RX / TX. Support USB download and Power. Support for external 5V ~ 12V DC power supply. Support power supply by 9V battery. Support ISP download. Package including: 5 x Arduino Nano V3.0 with ATMEGA328P Module9. KOOKYE 5PCS Nano V3.0 ATMEGA328P Module CH340G 5V 16M Mini USB Micro-Controller Board for Arduino(Nano5)
Feature
The Arduino Nano is a compact board similar to the UNO.The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.The Arduino Nano can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
Each of the 14 digital pins on the Nano can be used as an input or output.They operate at 5 volts. Each pin can provide or receive a maximum of 40 mA and has an internal pull-up resistor (disconnected by default) of 20-50 kOhms. In addition, some pins have specialized functions.
The Nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analogReference() function. Analog pins 6 and 7 cannot be used as digital pins. Additionally, some pins have specialized functionality.
The Arduino Nano has a number of facilities for communicating with a computer, another Arduino, or other microcontrollers.Such as UART TTL (5V) serial communication and I2C (TWI) and SPI communication
Description
More Download Information: www.kookye.com/?p=6382
--The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x).
--The Arduino Nano can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
--The ATmega328 has 32 KB, (also with 2 KB used for the bootloader). The ATmega328 has 2 KB of SRAM and 1 KB of EEPROM.
--Specification--
MicrocontrollerAtmel Atmega328P-AU MCU
Operating Voltage (logic level)5 V
Input Voltage (recommended)7-12 V
Input Voltage (limits)6-20 V
Digital I/O Pins14 (of which 6 provide PWM output)
Analog Input Pins8
DC Current per I/O Pin40 mA
Flash Memory16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by bootloader
SRAM2 KB (ATmega328)
EEPROM1 KB (ATmega328)
Clock Speed16 MHz
Support USB download and Power
Support for external 5V ~ 12V DC power supply
Support power supply by 9V battery
Support ISP download
CH340G Driver Download link : http://www.wch-ic.com/download/list.asp?id=126 OR http://www.5v.ru/ch340g.htm
IDE of arduino Download link : http://arduino.cc/en/Main/Software
Dimensions0.73" x 1.70"
Length45 mm
Width18 mm
Weigth5 g
Package:
5x Nano Board
10. ARDUINO Nano [A000005]
Feature
The Arduino Nano is one of the smallest Arduino boards available on the marketTiny form factor, complete, and breadboard-friendly board based on the ATmega328
It works with a Mini-B USB cable
Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users
