If you looking for metal nibbler then you are right place. We are searching for the best metal nibbler on the market and analyze these products to provide you the best choice.
Best metal nibbler
1. Makita JN1601 Sheet Metal Nibbler, 16 Ga, 5.0 A, 120V,Blue
Feature
Clean and precise work in keystone plate, deck plate and other corrugated sheet materialsDie rotates 360
Large 1/4"" stroke
Ergonomic, slim body design for easy gripping
Extremely light (weighs only 3.6 lbs.) for easy handling.Overall Length : 10.25 inches
Lock-on sliding switch for continuous operation
Built-in thickness gauge for convenience
Easy punch and die replacement for reduced down time
Double insulated
Wrench (781028-4),Hex Wrench (783208-8),JN3201,JN3200
Description
This Makita nibbler features a 360-degree rotating die, large 1/4in. stroke, sliding switch for continuous use, built-in thickness gauge and easy punch and die replacement. Includes wrench and hex wrench. Cordless: No, Cutting Capacity Mild Steel (gauge): 16, Cutting Capacity Stainless Steel (gauge): 18, Cutting Depth (in.): 1/4, Volts: 115, Inside Cutting Radius (in.): 1 3/4, Strokes Per Minute (SPM): 2,200, Cutting Capacity Aluminum (gauge): 10, Amps: 5, Outside Cutting Radius (in.): 2.2. Parts Express Nickel Plated Nibbling Tool
Feature
Save when you buy the 2-PackDescription
Nickel plated tool cuts up to 18 gauge non-hardened metals and plastics. Ideal for making square holes for fuse holders, switches, indicator lamps, etc. 7" in length.3. LTMS 021104 Double Head Metal Sheet Nibbler Cutter Drill Attachment with Wrench and Parts Workshop Tool Black 5pcs Set
Feature
Making cutting jobs easier, faster and safer with L.TMS double headed sheet metal nibbler cutter, easily fit into any standard drill. it can glide through material up to 2mm thick or 14 gauge and creates a precision, burr free edge.Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminum, formica, plastic, fiberglass etc. It is so versatile and it can handle it all with ease.
Cut in any direction and follow the profile of the material. Gutters, roof sections, complex shapes or stencils can be cut with precision as it can move anywhere within 360 degrees. The maneuverability of this nibbler over the material makes it an incredibly versatile tool for many applications.
Straight and circle cutting, this is a powerful tool that will change the way you think about cutting sheet material and open up new possibilities that will save your time and effort on many jobs.
This multipurpose instrument is the perfect tool for DIY lovers.
Description
L.TMS - A leading brand and professional producer for high quality cutting tools with a mission to make a difference in cutting.
Sheet cutting has never been easier with L.TMS double head sheet metal nibbler cutter. It can be powered by any standard drill with 1500-3000 RPM. Easy operation, simply insert the drive shaft into the drill chuck then tighten the chuck and the nibbler cut is now ready to cut. Cutting sheet material such as steel, iron, copper, aluminum, plastic and fiberglass becomes a much easier job. The DIY lovers dream tool, it offers 360 degrees adjustable all direction cutting. It comes with all the useful extra parts and pack in the compact portable
Feature:
Suitable for car repair and maintenance and metal sheet productions
Straight cutting and curve cutting capable
Double cutting head and 360 degree adjustable
Excellent cutting effect without any burrs and edges
Ergonomic design handle for comfort, durable, no distortion, no sparks,efficient and safe
Compact size, easy to operate and labor-saving, cutting in any direction and angle desired
Maximum cutting capacities: iron/steel plate 1.8mm, stainless steel plate 1.2mm, copper/aluminium plate 2mm,plastic/fibreglass board 2mm
Minimum cutting radius: 12mm
Fits to any electric or pneumatic drill with speed of 1500- 3000rpm
Dimensions:
Length: 7 width: 2 height: 3.11 (inches)
Package included:
1 x Nibbler cutter
1 x Extra nibbler punch
1 x nibbler die
1 x Hex key
1 x Plastic handle
1 x Iron case
1 x User manual
Notice:
1. Due to lighting effects, monitor's brightness, contrast settings etc,there could be some slight differences in the color tone of the pictures and the actual item!
4. REXBETI Double Head Sheet Nibbler Metal Cutter, Quality Nibbler Drill Attachment for Straight Curve and Circle Cutting, Maximum 14 Gauge Steel
Feature
Easy and fast to cut 14 gauge material and creates a precision, burr free edge360 degree double cutting head to cut straight line, curve line and circles
HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
Lnchett sheet metal nibbler, we offer 5 Years home use warranty and 30 days money guarantee
Description
Cutting sheet metals will never be the same with Lnchett professional nibbler. It's light, compact and sleek. Powered by a standard drill between 1500-3000 RPM, just simply insert the drive shaft in the chuck of your drill and tighten the chuck, exactly like putting in a drill bit. when you start up the drill and the nibbler will be ready to cut. It will be a big time saver for cutting sheet metal and corrugated metal roof sheets. the 360 degree adjustable cutting head allows easy control and has no problem handling any curve or straight you throw to it. Versatile cutting round accessories helps you to easily cut straight and round .Also the iron tool box which holds all parts in helps you no worry to carry them anywhere or lose any.5. Makita JN3201 10-Gauge Nibbler
Feature
Powerful 6.2 AMP motor delivers 1,300 SPM to complete the most demanding applicationsLess noise at 81 dB(A) for continuous operation
Well balanced with a rubberized soft grip handle for greater comfort
Built-in thickness gauge for added convenience
Refined design at only 7.4 lbs. for increased control
Lock-on switch for continuous operation
Ideal for metal cutting up to 10 gauge mild steel and 13 gauge stainless steel
Highly visible line-of-sight for precise pattern following
Convenient chip disposal located below cutting material to minimize damage to cutting surface
Small cutting radius (4-3/4 inner edge, 5-1/16 outer edge) for precision applications
Easy punch and die replacement for reduced downtime on the job
Hex wrench storage on the tool for operator convenience
Punch (792728-1)
Die (792292-2)
Hex Wrench (783201-2)
Wrench (781019-5)
JN3200
JN1601
Description
The Makita 10 Gauge Nibbler (model JN3201) features a powerful 6.2 Amp motor for continuous operation in up to 10-gauge mild steel or 13-gauge stainless steel. A built-in thickness gauge means more convenience, and all ball and needle bearings promote longer tool life. The Makita JN3201 also features easy punch and die replacement for less downtime, and double insulation for longer tool life. The JN3201 is engineered for less noise (only 81 dB(A)) for continuous operation.6. Makita XNJ01Z 18V LXT Lithium-Ion Cordless 16 Gauge Nibbler, Tool Only
Feature
Makita-built motor delivers 1,900 SPM for fast and smooth cuttingIdeal for cutting roofing sheet metal at thicknesses up to 16 gauge
Die holder rotates 360Degree to meet demands of cutting direction
Convenient chip disposal is below cutting material to minimize damage to cutting surface
Cutting radius: inner edge 1-3/4"; outer edge 2"
Description
The 18V LXT Lithium-Ion Cordless 16 Gauge Nibbler (model XNJ01Z, tool only) provides contractors with another 18V LXT metal cutting solution. The XNJ01Z is engineered for cutting corrugate metal roof decking, sheet metal, and stainless steel, and it will do the job without the cord. It is ideal for metal roofing and decking contractors, HVAC, and metal fab shop work.7. Nibbler Cutter Drill Attachment Double Head Metal Sheet- Wrench and Parts ,Tool Black Set
Feature
🎄PERFECT PERFORMANCE NIBBLER ,This amazing drill attachment nibbler is suitable for any kind of home repairs and home improvement Excellent cutting effect without any burrs and edges ,Compact size, SUPER EASY to operate and labor-saving, cutting in any direction and angle desired🎄TRANSFROM YOUR DRILL INTO AN AMAZING NIBBLER Capable of cutting any kind of thin metal and sheets ,Fits to any electric or pneumatic drill
🎄CUTTING SPEED of 1500 - 3000rpm 360 degree cutting head ERGONOMIC design handle for comfort, durable, no distortion, no sparks, efficient and safe
🎄 GREAT FOR : iron/steel plate 1.8mm, stainless steel plate 1.2mm, copper/aluminium plate 2mm, plastic/fibreglass board 2mm
🎄MONEY BACK GUARANTEED ,if you are not satisfied with our NIBLLER or you just simply dont want it you ,we will give you your money back no questions ask, we stand behind our products that we feel confident enough to offer you only the BEST QUALITY
Description
PERFECT for any repair and home improvement and metal sheet productions
PERFECT cutting and curve cutting ability with the less labor posible
DOUBLE cutting head
EXELLENT cutting effect
ERGONIMIC AND MODERN handle for comfort,
DURABLE, BEST QUALITY GUARANTEED
COMPACT SIZE and easy to oparate
MINUMUM cutting radius: 12mm FITS to any electric or pneumatic drill Dimensions: Length: 7 width: 2 height: 3.11 (inches)
Package included: 1 x Nibbler cutter, 1 x Extra cutter stick, 1 x Cutter holder, 1 x Hex key,
1 x Plastic handle, 1 x Iron case, 1 x User manual
8. Double Headed Sheet Metal Nibbler 360 Degree, REXBETI Ultimate Metal Cutter for Straight Circle and Round Cutting, Burr-free Edge - Extra Punch and Die, 1 Cutting Hole Accessory and 1 Step Drill Bit
Feature
Glide through material up to 2mm thick or 14 gauge and creates a precision, burr free edgeVersatile cutting accessories for ROUND and STRAIGHT cutting
HSS steel punch helps you effortlessly cut beautifully
Fits any drill that works between 1500-3000 RPM
4 Years home use warranty and 30 days money guarantee
Description
Cutting sheet metals will never be the same with REXBETI ultimate nibbler. It's light, compact and sleek. Powered by a standard drill between 1500-3000 RPM, just simply insert the drive shaft in the chuck of your drill and tighten the chuck, exactly like putting in a drill bit. when you start up the drill and the nibbler will be ready to cut. It will be a big time saver for cutting sheet metal and corrugated metal roof sheets. the 360 degree adjustable cutting head allows easy control and has no problem handling any curve or straight you throw to it. Versatile cutting round accessories helps you to easily cut straight and round .Also the iron tool box which holds all parts in helps you no worry to carry them anywhere or lose any.Features:
Perfect for car repair and house maintenance like metal roof cutting, HVAC vent pipe and other metal sheets
Versatile cutting accessories for ROUND and STRAIGHT cutting
Double cutting heads adjust 360 degree for easy cutting in any space
Different cutting shapes available
Best cutting result without any burrs at the cutting edges
No distortion of material
Cuts any shape to 12 mm radius
Extra nibbler die and punch
Safe to touch, easy to work with
Powered by a Hand Drill - no additional power source needed
Maximum cutting capacities:
- iron/steel plate 1.8mm
- stainless steel plate 1.2mm
- copper/aluminium plate 2mm
- plastic/fibreglass board 2mm
Package included:
1 * metal sheet nibbler cutter
1 * Plastic handle
1 * Cutting round accessories
1 * Extra nibbler cutter die
1 * Nibbler cutter punch
1 * Wrench
1 * Iron tool box
1 * User manual
Notice:
To get the best cutting results, please work it on a corded drill with high RPM ( 1500 - 3000 )
9. Astro Pneumatic Tool 727 ONYX Heavy Duty Air Nibbler
Feature
For professional grade applicationsWorks on up to 17-gauge cold rolled steel
Eat through sheet-metal without deformation of edges
Cut over an inch a second with unmatched balance
Speed RPM: 3,500 CPM