If you looking for lowering springs kia forte then you are right place. We are searching for the best lowering springs kia forte on the market and analyze these products to provide you the best choice.
Best lowering springs kia forte
1. Manzo USA Kia Forte Lowering Drop Springs Coil Kit
Feature
Performance sport lowering springsSAE 9254 cold wound steel
Lowers the vehicle approximately 1.5"-2" F/R
Direct fitment, replaces factory springs using stock struts
Increases vehicle stability with lower center of gravity
Description
Fits vehicle: Kia Forte 2010-2013 2.0L Theta II 4Cyl 2DR Coupe/4DR Sedan. Performance lowering springs are the perfect upgrade for your vehicle. Lowers the vehicle for lower center of gravity, stability during cornering, and overall handling.2. ARK Performance LF0800-0100 GT-F Lowering Spring (Kia Forte Koup)
Feature
Front Drop 1.25" , Rear Drop 1.00"Improves Handling and Cornering
Reduces Body Roll
Works with OEM Shock Travel
Comfortable Ride Quality
Description
ARK Performance offers high quality lowering spring kits that provide a clean drop, comfortable ride, and greater performance. ARK GT-F Lowering Springs are designed to provide drivers with dramatic improvement in handling characteristics and cornering. Drivers will feel a significant increase in steering response, better cornering grip entering and exiting out of turns with reduced body roll, and a lowered center of gravity while maintaining smooth and comfortable ride quality for daily driving. ARK Performance GT-F Lowering Springs are designed by our suspension engineers and tested by professional drivers to find the perfect ride height and spring rate to deliver the best ride quality and performance without neglecting the driver's safety on and off the track. Our springs are the perfect combination with your OEM shock absorbers. They provide an excellent stance with your stock or aftermarket wheels, while keeping your tires on the road for maximum grip. Each spring is made from the highest quality materials, with the leading coiling technology, and is powder coated to prevent corrosion. ARK GT-F and GT-S Lowering Springs provide the ultimate suspension balance to give you confidence on any road or course.3. Eibach 4617.140 Pro-Kit Performance Lowering Spring
Feature
High performance handling and aggressive good looksLower center of gravity - lowers vehicle by 1.0 inch - 1.5 inch
Stops quicker, corners faster and get better MPG
Progressive spring design for excellent ride quality
Description
The Eibach Pro-Kit is the perfect answer for most frequently-driven street cars. It's Eibach's legendary spring system that dramatically improves both a vehicle's performance and appearance. Pro-Kit lowers your car's center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with Plus-1 or Plus-2 wheels and tires, the Eibach Pro-Kit is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender-well clearance, making your car look just as hot as it performs. Every Eibach Pro-Kit is designed and tested by Eibach's suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using Eibach proprietary, progressive spring design, Pro-Kit provides the ultimate balance to take your passion for driving to a whole new level.4. GODSPEED PROJECT TRACTION-S SPRINGS FOR KIA FORTE COUPE SEDAN 2010-2013 (TD) SET KIT GSP
Feature
GODSPEED PROJECT TRACTION-S SPRINGS FOR KIA FORTE COUPE SEDAN 2010-2013 (TD) SET KIT GSPMulti Heat Treated SAE 9254 Wire, Cold Wound To Prevent Sag Overtime
Designed To Work With OEM Shocks, Better With Aftermarket High Performance Shocks
Average Drop: Front: 1.3" Rear:1.4"
Lifetime Limited Warranty On Material Defect And Craftmenship
Description
GODSPEED PROJECT TRACTION-S SPRINGS FOR KIA FORTE COUPE/SEDAN 2010-13(TD)
Godspeed Project's performance lowering springs are cold wound on coil winding machine with SAE 9254 spring wire material, one of the ideal materials available. Manufacturing Process involves steel material going through heat treatments before winding into coils, these are necessary steps in order to deliver an outstanding ultra high tensile strength and provide equal spring rates that are extremely durable in order to resist premature "sagging". The end result of this process generates a spring that specifically offers improved vehicle handling and response capabilities while maintaining a very smooth yet comfortable ride experience. Each spring has been carefully precision tested and inspected in order to provide outstanding handling, response, control and balance throughout the suspension of your vehicle. These quality made performance lowering springs designed to work with OEM shocks and offer a generous drop to your vehicle while remaining at a comfortable daily ride height in order to avoid bottoming-out and clearance issues. Not only lowering your vehicle will improve vehicle handling, will also enhance overall appearance.
Average Drop: Front: 1.3" Rear:1.4"
NOTE: Lowering height are measured from center hub to edge of fender arch.
Multi Heat Treated SAE 9254 Wire, Cold Wound To Prevent Sag Overtime
Powder Coated Finish Prevent Corrosion
Designed To Work With OEM Shocks, Better With Aftermarket High Performance Shocks
Average Drop: Front: 1.3" Rear:1.4"
Lifetime Limited Warranty On Material Defect And Craftmenship
High Performance Lowering Spring Set
Does not come with installation instructions
5. Rev9(R9-HS2-059) Hyper-Street II Coilover Lowering Kit, Mono-Tube Shocks 32 Rebound Settings
Feature
Fits 2015, 2016, 2017, 2018 Kia Forte(K3)/Forte Koup(K3)/Forte5(K3)Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way
Mono Tube Shock With Steel Alloy Body And Valving Allows 32 Clicks Rebound Force Adjustment
Independent Spring Tension And Ride Height Settings To Allow Stiffness And Ride Height To Be Adjusted Separately
No Installation Instructions; Install By Experienced Professionals Recommended
Description
Hyper-Street II coilover suspension upgrade features mono-tube shocks with 32 clicks rebound settings and full length adjustable. Mono-tube shocks provides larger capacity for gas and oil to improve comfortable level of typical lowering vehicle. Special 32 clicks of valving allows user to fine tune rebound force settings. Independent spring tension and full length adjustable allows drop without sacrifice comfort by shorten pitch distance.
- Full Steel Alloy Constructions With Aluminum Hardware
- Mono-Tube Shocks Provide Larger Capacity of Oil And Gas
- 32 Clicks of Rebound Force Adjustment
- Full Length Adjustment - Lowers The Car Without Ruining Spring Tension
- Independent Spring Tension - Custom Stiffness Without Change Ride Height
6. Godspeed(MSS0102-B) MonoSS Coilover Lowering Kit, Adjustable Ride Height, 16 Levels Rebound Damping, Performance Upgrade
Feature
Fits 2010, 2011, 2012, 2013 Kia Forte(TD); Spring Rate(Front//Rear): 6 kg/mm // 4 kg/mm52mm Mono-Tube Stainless Steel Shock With 16 Levels of Damping Adjustment Corresponds to Daily Driving Scene To The Sunday Track
Performance Internal Piston With Koyo Japan 6204z Bearing Provides Smooth Stroke; Powder Coated CNC Machined Aluminum And Carbon Steel Accessories
Independent Spring Tension And Height Adjustment; Racing Grade Shock Oil With High Viscosity Index; Shock Absorber Can Be Rebuild When Worn Out
1 Full Year Limited Warranty From Date Of Purchase; Install By Experienced Professionals Is Highly Recommended
Description
Godspeed Project's MonoSS is our one entity in our family of single-adjustable coilover suspension kits. These coilovers are designed to be a streetable race built coilover at an affordable price. It features a monotube damper that is made out of a carbon seamless steel 52mm tube with a performance internal piston providing maximum damper response. The cold-bent springs are made from high strength SAE9252 steel to optimize the balance between performance and comfort. Using race quality shock oil, Godspeed Project can guarantee exceptional damper performance at any temperature on and off the track. The top of the shock is attached to the car using a high quality top hat that features a high performance Japanese KOYO 6204Z bearing pillow ball mount (when applicable). The bottom shock brackets are made out of a T7075 forged aluminum or carbon steel brackets for lighter weight without sacrificing durability which also includes brake line brackets (when applicable). The MonoSS offers 16 level of damper adjust ability which can be set to your preference.7. Godspeed(LS-TS-KA-0002) Traction-S Performance Lowering Springs, Reduce Body Roll, Improve Steering Response, Set of 4
Feature
Fits 2010, 2011, 2012, 2013 Kia Forte Coupe/Sedan; Average Lower: Front: 1.3" Rear:1.4"; Spring Rate(kg/mm): Front: 3.16/5.54 | Rear: 2.0/4.58Enhances on-road vehicle performance quicker turn-in, enhanced steering response and improved cornering.
Multi Heat Treated SAE 9254 Wire, Cold Wound To Prevent Sag Overtime; Powder Coat Finished For Corrosion Protection
Designed To Work With OEM Shocks, Better With Aftermarket High Performance Shocks; Lowered While Maintain Ride Comfort
Engineered to ensure against rattling, clunking or rubbing even when pushed to the limit.; Lifetime Limited Warranty On Material Defect And Craftsmanship
Description
Godspeed Project's performance lowering springs are cold wound on coil winding machine with SAE 9254 spring wire material, one of the ideal materials available. Manufacturing Process involves steel material going through heat treatments before winding into coils, these are necessary steps in order to deliver an outstanding ultra high tensile strength and provide equal spring rates that are extremely durable in order to resist premature sagging. The end result of this process generates a spring that specifically offers improved vehicle handling and response capabilities while maintaining a very smooth yet comfortable ride experience. Each spring has been carefully precision tested and inspected in order to provide outstanding handling, response, control and balance throughout the suspension of your vehicle. These quality made performance lowering springs designed to work with OEM shocks and offer a generous drop to your vehicle while remaining at a comfortable daily ride height in order to avoid bottoming-out and clearance issues. Not only lowering your vehicle will improve vehicle handling, will also enhance overall appearance.
Average Drop: F: 1.3" R:1.4"
8. Godspeed(MSS0104-A) MonoSS Coilover Lowering Kit, Adjustable Ride Height, 16 Levels Rebound Damping, Performance Upgrade
Feature
Fits 2012, 2013, 2014, 2015, 2016 Hyundai Veloster(FS); Spring Rate(Front//Rear): 8 kg/mm // 4 kg/mm52mm Mono-Tube Stainless Steel Shock With 16 Levels of Damping Adjustment Corresponds to Daily Driving Scene To The Sunday Track
Performance Internal Piston With Koyo Japan 6204z Bearing Provides Smooth Stroke; Powder Coated CNC Machined Aluminum And Carbon Steel Accessories
Independent Spring Tension And Height Adjustment; Racing Grade Shock Oil With High Viscosity Index; Shock Absorber Can Be Rebuild When Worn Out
1 Full Year Limited Warranty From Date Of Purchase; Install By Experienced Professionals Is Highly Recommended
Description
Godspeed Project's MonoSS is our one entity in our family of single-adjustable coilover suspension kits. These coilovers are designed to be a streetable race built coilover at an affordable price. It features a monotube damper that is made out of a carbon seamless steel 52mm tube with a performance internal piston providing maximum damper response. The cold-bent springs are made from high strength SAE9252 steel to optimize the balance between performance and comfort. Using race quality shock oil, Godspeed Project can guarantee exceptional damper performance at any temperature on and off the track. The top of the shock is attached to the car using a high quality top hat that features a high performance Japanese KOYO 6204Z bearing pillow ball mount (when applicable). The bottom shock brackets are made out of a T7075 forged aluminum or carbon steel brackets for lighter weight without sacrificing durability which also includes brake line brackets (when applicable). The MonoSS offers 16 level of damper adjust ability which can be set to your preference.9. Godspeed(MRS1800) MonoRS Coilover Lowering Kit, Adjustable Ride Height, 32 Levels Rebound Damping, Performance Upgrade
Feature
52mm Mono-Tube Stainless Steel Shock With 32 Levels of Damping Adjustment Corresponds to Daily Driving Scene To The Sunday TrackPerformance Internal Piston With Koyo Japan 6204z Bearing Provides Smooth Stroke; Powder Coated CNC Machined Aluminum And Carbon Steel Accessories
Independent Spring Tension And Height Adjustment; Racing Grade Shock Oil With High Viscosity Index; Shock Absorber Can Be Rebuild When Worn Out
1 Full Year Manufacturers Limited Warranty From Date Of Purchase; Install By Experienced Professionals Is Highly Recommended
Description
Godspeed Project's MonoRS is our intemediate single-adjustable coilover suspension kits. These coilovers are designed to be more durabel with thicker piston shaft than our MonoSS Coilover at an reasonable price. It features a monotube damper that is made out of a carbon seamless steel 52mm tube with a performance internal piston providing maximum damper response. The cold-bent springs are made from high strength SAE9252 steel to optimize the balance between performance and comfort. Using race quality shock oil, Godspeed Project can guarantee exceptional damper performance at any temperature on and off the track. The top of the shock is attached to the car using a high quality top hat that features a high performance Japanese KOYO 6204Z bearing pillow ball mount (when applicable). The bottom shock brackets are made out of a T7075 forged aluminum or carbon steel brackets for lighter weight without sacrificing durability which also includes brake line brackets (when applicable). The MonoSS offers 16 level of damper adjust ability which can be set to your preference.10. TuningPros LS-104-B Lowering Springs Kit Blue Set of 4
Feature
Color: Blue; Lower rate: 1.25-Inch Front, 1.0-Inch Rear ; Spring rate: 300F & 250RConstructed from Japan SAE 9254 cold wounded steel; Corrosion-Protected with phosphate and powder coatings
Spring rates specifically tuned for handling and comfort; Provide exceptional response, control and balance
Sold as a complete set of 4 springs; Compatible with OEM stock or aftermarket shocks
Custom fit for your vehicle; This part is guaranteed to fit: Kia Forte 2010-2012
Description
This lowering springs have been designed to give your vehicle superior handling with an aggressive race look. By radically lowering the center of gravity from OE height, using precision engineered progressive spring rates, it dramatically reduce squat during acceleration, body roll in corners, nose-dive under braking and improve performance. Made with SAE 9254 cold wounded steel, one of the strongest materials available and corrosion-protected with phosphate and powder coatings for durability. Spring rates are specifically tuned for handling and comfort, it provide exceptional handling, response, control and balance. Custom made to fit specific vehicle application.
- Sold as a complete set of 4 springs, which inclues 2 front springs and 2 rear springs
- Lower rate: 1.25-Inch Front, 1.0-Inch Rear ;
- Spring Rate 300F & 250R
