If you looking for lane action recliner parts then you are right place. We are searching for the best lane action recliner parts on the market and analyze these products to provide you the best choice.
Best lane action recliner parts
1. Recliner-Handles Lane Replacement Flapper Style Recliner Release Handle for Lane and Action
Feature
Flapper Style Recliner HandleFits Lane and Action Recliners
2 5/8" Exposed Wire, oval tip, overall length of cable 23 1/2"
Description
Replacement recliner handle for Lane and Action Lane recliners. This recliner repair part is a flapper also called car-door style recliner release handle. This Lane furniture repair part is the replacement recliner release handle that is on the outside arm of Chair or Recliner. Dimensions: 2 5/8" Exposed Wire, oval tip, overall length of cable 23 1/2". Release handle measures 4 3/8" by 3". Contact Customer Service For Additional Information and Bulk Pricing.2. Lane Mechanism Extension Tube Action Recliners 5.5 Inch Length
Feature
5.5 Inch Extension Tube For Recliner5/8 Inch Diameter
Used In Lane and Action Furniture Recliners
Description
Lane 5.5 Inch Extension Tube For Recliners. Used in Motion Recliners, This Extension Tube Attaches to Drive Tube on one side and the Recliner Lever Style Handle on the other. This Extension Tube is a OEM Part Specifically Used in Lane, Action, and The HomePlace Group Furniture. Contact Customer Service For Additional Information and Bulk Pricing.3. Lane Action OEM Drive Tube for Recliners 30 5/8 Inch Total Length 5/8 Inch Diameter
Feature
Fits Action Lane and Other Brands that Use this Style Drive Tube.30 5/8 Inch Total Length
5/8 Inch Outside Diameter
Description
Drive Tube For Recliner Mechanism 30 5/8 Inch Total Length. This Drive Tube Is Used on Lane, Action, HomePlace Group Furniture and Others. This Drive Tube Measures 5/8 Inches Outside Diameter and 1/2 Inch Inside Diameter and is 30 5/8 Inches in total Length. Compatible with any Recliner That uses this Style and Size Drive Tube. Contact Customer Service For Additional Information or Bulk Pricing4. Lane OEM Replacement Recliner Mechanism Tension Spring 2 1/16 Inch Long 3/4 Inch Diameter Used On Chair Style 2565
Feature
2 1/16 Inches Total Length3/4 Inch Coil Diameter
Used in Lane and Action Furniture
Used On Chair Style 2565
Description
Lane OEM Replacement Recliner Mechanism Tension Spring. Spring has total length of 2 1/16 Inches and Diameter of 3/4 Inch. Spring has 7 Coils and a Total Coil Length of 1 5/8 Inches. The Hooks of this Spring are offset facing opposite directions of each other. Each Hook Measures 3/4 Inch Above the Coil. This Spring will Replace an Old or Broken Spring on Lane, Action, and HomePlace Group Recliners, and is direct Replacement for Lane Chair Style 2565. This Spring is used on The Mechanism Release Trigger. Contact Customer Service For Additional Information and Bulk Pricing.5. DIY-Furniture Parts Recliner or Sofa D-Pull Handle 27" Total with 2 1/2" Exposed Wire and Oval Tip Fits Lane and Others
Feature
D Pull Style Release HandleDescription
Standard D-Pull handle.6. Podoy Recliner Cable D Ring 27" w/Release Pull Handle for Universal Sofa Chair Adjust D-Ring Replacement
Feature
This recliner release handle used in lane and action reclinersExposed Length 2.5 " (6.35cm) with spring-total overall length 27" (68.5cm) D ring universal pull parts
Inside arm replacement for recliner cable. It can fits most major recliner brands. This is a handle type replacement cable for recliner sofas and chairs
Package quantity: pack of 1
This is the non-original aftermarket part
Description
Product descriptionExposed Length 2.5 inches (6.35cm) with spring-total overall length 27 inches (68.5cm) D ring universal pull parts
This is the perfect replacement handle to fix or rejuvenate your Lane furniture
This is the non-original aftermarket parts
7. Recliner-Handles Replacement D-Ring Parachute Style Recliner Release Handle for Lane and Action Furniture by Recliner-Handles
Feature
D-pull Style Recliner Release HandleUsed In Lane and Action Recliners
Description
Recliner-Handles Brand Be Aware of Imitators Only products purchased directly from Recliner-Handles carry our warranty. Lane Recliner / Sofa D-Ring or also called parachute style release handle. This is the perfect replacement handle to fix or rejuvenate your Lane furniture. This is a universal part for Lane furniture but be sure to double check a few things just in case the dimensions are somehow different before you buy. - Length: 27 inches in total - Length: From clip to the end of exposed wire should be about 2.5 inches8. Lane Recliner Release Cable Replacement - D-Ring Parachute Pull Handle (H007)
Feature
D-Pull Style Release Handle27 Inch Total from Handle to Oval tip
Ending is 2.5 Inch Wire with a Silver Barrel Clip
Fits Lane and Many Major Recliner Brands
Description
This replacement part fits Lane and many major recliner brands. This D Pull style handle has the standard 1.5" long by 2.75" wide D shaped handle. The 6 hole plate at the neck of the D-Pull is 1.25" long and 1.625" wide (SCREWS NOT INCLUDED). The cable from the collar below the handle to the end of the oval tip is 24.75". From the start of the exposed wire (at the end of the silver barrel fitting) to the oval shaped ending is 2.5" long. The exposed wire with the barrel measures 3.375" long. The total assembly measures 27" in length. This cable handle is a pull type or sometimes called a parachute or "D" handle. This is used on reclining furniture that has the handle in between the seat and the arm (you reach down beside the seat cushion and pull this up). The critical measurement for D pull assemblies is the exposed wire and the cable length from the mounting plate to the exposed wire. The cable can be as long or longer than your current cable and works equally well with or without a spring on the exposed wire. The excess cable will just hide inside your sofa. But the exposed wire length, clip style and ending tip is critical. For any DIY project, measurements and fittings are very important. The exposed wire and ending shape are critical for the proper operation of the footrest mechanism of your reclining furniture. Please remove the broken or damaged handle and save any screws or attachment pieces. Carefully observe the attachment of the exposed wire to the footrest release mechanism and the position of the mounting clip when removing the handle. There are several lengths of cables and exposed wires as well as mounting plate, clip, and ending shapes.9. Choice Parts - Black Recliner Cable with Release Handle for Lane and Action Furniture - Exposed Cable Length: 2.5". - O Shape Tip
Feature
Replacement D-pull recliner handleO Shape Tip
Exposed Cable Length: 2.5"
Total Cable Length: 27"
Satisfaction Guaranteed - If this does not work with your couch we will refund 100% of your order.
Description
Choice Parts Recliner Mechanism Recliner Handle for sofa/love seat. Parachute Style inner recliner release handle, also known as D-Ring. Mechanism cable and recliner mechanism clip included. Perfect replacement handle to fix or rejuvenate your Lane furniture. This is a universal part for Lane furniture, but be sure to double check your measurements before you order, in case the dimensions vary. - Length: 27 inches in total - Length: From clip to the end of exposed wire should be about 2.5 inches10. Lane Furniture Drive Tube for Recliner Mechanism 27 Inch Total Length .75 Inch Diameter
Feature
Fits Action Lane and Other Brands that Use this Style Drive Tube.Fits over 5/8 inch lever style recliner extension Tube