If you looking for engine epoxy then you are right place. We are searching for the best engine epoxy on the market and analyze these products to provide you the best choice.
Best engine epoxy
1. J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe - Dries Translucent Yellow - 25 ml
Feature
Translucent yellow drying epoxy sets in 5 minutes and cures in 1 hourGreat for most hard plastics, ABS, fiberglass, pvc, glass, vinyl and most composites
Tensile strength of 4400 PSI for a strong, permanent bond
No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out
J-B Weld is proudly made in the USA
Description
J-B Weld PlasticWeld SyringePlasticWeld is a specially formulated two-part adhesive and epoxy filler system that provides for strong, lasting repairs. PlasticWeld will bond a variety of surfaces, such as metal, composites, fiberglass and others. PlasticWeld sets in 5 minutes at room temperature and is fully cured in 1 hour. Using a 1:1 mixing ratio, PlasticWeld combines to a tensile strength of 4400 PSI and cures to a translucent yellow color.
Use on:
Instructions
1. Prepare: Clean repair area of dirt, grease, oil, paint, rust, etc.
2. Mix: After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.
3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
4. Dry: Sets in 5 minutes. Cures in 1 hour. If temperature is below 40 degrees Fahrenheit, then set time is longer.
J-B Weld is proudly made in the USA
2. J-B Weld 8297 HighHeat 550 Degree Epoxy Putty Stick - 2 oz.
Feature
Hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperaturesGreat for exhaust manifolds, tail pipes, mufflers, engine blocks, machinery and other high temperature projects
Sets in 1 hour at room temperature, functionally cures in 8 hours and withstands continuous heat of 400F (550F intermittent)
Once cured, it forms a permanent bond and can be drilled, tapped, machined, ground and filed
J-B Weld is proudly made in the USA
3 times stronger at high temperatures
Withstands continuous heat up to 450 degrees Fahrenheit, and intermittent heat up to 500 degrees Fahrenheit
Strength of 800 PSI at room temperature and 600 PSI at 400 degrees Fahrenheit
Perfect for tail pipes, mufflers, machinery, engine blocks, and exhaust manifolds
Special Shipping Information: This item cannot be returned and has additional shipping restrictions
Description
J-B Weld HighHeat Epoxy PuttyHighHeat is a hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage. This industrial-strength product outperforms conventional epoxy putties at high temperatures and sets in 1 hour at room temperature. After 8 hours, it can be drilled, tapped, machined, ground, filed and painted. HighHeat is rated at a tensile strength of 800 PSI and cures to a machine grey in color. It is able to withstand continuous heat exposure of 400 degrees F and intermittent heat exposure to 550 degrees F.
Use on:
Instructions
1. Cut:Remove required amount of putty.
2. Mix: Thoroughly knead putty with fingers to a uniform color.
3. Apply: Press putty firmly to the surface to be repaired.
J-B Weld is proudly made in the USA
3. J-B Weld 37901 Extreme Heat High Temperature Resistant Metallic Paste - 3 oz.
Feature
Organic repair paste able to withstand extreme heat up to 2400 degrees FahrenheitOrganic repair paste can be used for filling cracks and holes on metal surfaces
Sets in 1 hour and dries machine grey to a functional cure in 24 hours
Great for exhaust manifolds, tail pipes, mufflers, engine blocks, duct work, fireplaces, grills and more
J-B Weld is proudly made in the USA
Description
J-B Weld Extreme Heat High Temperature Resistant Metallic PasteJ-B Weld Extreme Heat is formulated to allow for repairs to iron, steel and metal in high temperature environments (2400F / 1300C). When fully cured, this metallic compound can be drilled, machined or sanded. It is great for repairing cracks, small gaps, seam connections or holes in exhaust manifolds, pipe connections, mufflers, catalytic converters, outdoor grills, fire boxes, gas and commercial furnaces and water heaters. This product is water based, non-flammable and contains no solvents or Volatile Organic Compounds (VOCs).
Great for:
Use on:
Instructions
1. Prepare: Remove dirt, debris or loose contaminants from surface. Use sand paper to roughen. For some repairs, open small cracks further with a drill or screwdriver to create a 1/8" gap.
2. Mix: Open J-B Weld Extreme Heat and thoroughly mix product.
3. Apply: Use product generously, working onto surface or into hole, crack, pit or seam. Repeat as needed. Allow 2-4 hours set up, depending on temperature and current environment.
4. Dry: Test cure by pressing fingernail or thumbnail into repair material. If unable to penetrate, then repair is complete. If area appears slightly soft, use a non-flame heat source, such as a hair dryer, to speed cure time, or allow 24 hours before allowing high heat exposure. Repeat test until fully cured.
J-B Weld is proudly made in the USA
4. Blue Magic 8024 ThermoSteel High-Temp Metal Repair - 24 oz.
Feature
Welds cracks and holes in iron and steelWithstands temperatures to 2400 degree Fahrenheit
Strength increases with heat
Fills cracks and holes and pits
Great for boilers, stoves, BBQ's, furnaces, heaters
Description
CarGo ThermoSteel high temp repair kit fills cracks and pits. Will withstand direct flame and strength increases with heat. Repairs furnaces, BBQ's or any high heat item. Professional size 25.08 ounce.5. J-B Weld 37901 2 Pack 3 oz. Extreme Heat Temperature Resistant Metallic Paste
Description
J-B Weld 37901 2 Pack 3 oz. Extreme Heat Temperature Resistant Metallic Paste6. J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - Dark Grey 2 oz
Feature
Fast setting version of The Original J-B Weld two-part epoxy cold weld systemGreat for household repairs, automotive applications, crafts and more
Sets in 6 minutes and cures dark grey in 4-6 hours and rated at a tensile strength of 2424 PSI
Once cured it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled and will withstand temperatures of up to 300 degrees Fahrenheit
J-B Weld is proudly made in the USA
Description
J-B Weld KwikWeld Quick Setting Steel Reinforced EpoxyJ-B KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. J-B KwikWeld cures to a dark grey color, is rated at a tensile strength of 2424 PSI and will withstand temperatures up to 300 degrees F.
Great for:
Use on:
Instructions
1. Prepare: Clean surface area of dirt, grease, oil, paint, or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.
2. Mix: Squeeze equal parts from each tube onto a disposable surface and mix thoroughly.
3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
4. Dry: Sets in 6 minutes. Cures 4 hours. If temperature is below 40 degrees F, then set time is longer.
J-B Weld is proudly made in the USA
7. Permatex 84333 High Temp Epoxy Stick - 2 oz.
Feature
Industrial strength, titanium-reinforced epoxyBonds and repairs materials exposed to high temperatures up to 500F
Cures to a hard, metal-like repair
Non-shrinking formula
Description
Permatex High Temp Epoxy is an industrial strength, titanium-reinforced epoxy that cures to a hard, metal-like repair. This non-shrinking formula bonds and repairs materials exposed to high temperatures up to 500 degrees Fahrenheit.8. Blue Magic 18003TRI ThermoSteel High-Temp Metal Repair - 3 oz.
Feature
Welds cracks and holes in iron and steelWithstands temperatures to 2400 degree Fahrenheit
Strength increases with heat
Fills cracks and holes and pits
Great for boilers, stoves, BBQ's, furnaces, heaters
Description
CarGo ThermoSteel high temp repair kit fills cracks and pits. Will withstand direct flame and strength increases with heat. Repairs furnaces, BBQ's or any high heat item.9. MG Chemicals 832HT High Temperature Black Epoxy Encapsulating and Potting Compound, 11.5 fl. oz 2-Part kit
Feature
Suitable for very high temperature applications; service temperature range -40 to 225 C (-40 to 437 F)Extreme resistance to chemicals. water and humidity (allows for submersion where needed)
1.7A:1B volume mix ratio
Extreme compressive and tensile strength
Excellent electrical insulating characteristics
Description
832HT potting and encapsulating compound is designed for high temperature applications and is especially useful when extreme physical strength and chemical resistance are required. It also provides excellent electrical insulation and protects components from static discharges, vibration, abrasion, thermal shock, environmental humidity, salt water, fungus, and many harsh chemicals. 832HT potting and encapsulating compound is a general purpose, hard, black, two-part epoxy that offers extreme environmental, mechanical and physical protection for printed circuit boards and electronic assemblies. 832HT can be cured at room temperature or higher.10. Loctite - 9340 Hysol - Green Epoxy Structural Adhesive High Temp 2.7 Ounce
Feature
Excellent Heat ResistanceGood Tensile Sheer Strength
Resistant to Automotive Fluids
Sandable
Easy to Mix