If you looking for cement screws then you are right place. We are searching for the best cement screws on the market and analyze these products to provide you the best choice.
Best cement screws
1. Ansen Tools AN-133 Diamond Tip Hex Head Concrete Screw Anchor 3/16" x 1 1/4". 100 Piece With Drill Bit
Feature
Diamond tip penetrates extra hard materialsLifetime corrosion resistance
ICC Listed for quality assurance
Hi-lo self-tapping thread design
Advanced Envirocoat plating process
Description
The Ansen Tools AN 108 Diamond Tip Hex Head Concrete Screw Anchor with its Diamond Tip is designed for the most precise penetration in extra hard materials. The screws are made from high-grade hardened carbon steel with the advanced plating process; Envirocoat, which provides lifetime corrosion resistance. Drill bit included for pilot hole in concrete. Screw anchors are ICC Listed for Quality Control (see report ER-5045). Box comes with 100 screw anchors and carbide tipped drill bit.2. Hillman 41567 Concrete-Screws
Feature
BLUE Perma-Seal coatedFor use with treated lumber
Building code approved
Description
State of the art thread design cuts into concrete. Tapper screws are designed for fastening applications in concrete, block and brick. Use Tapper screws to attach electrical equipment, two by fours, downspout straps, hose reels, flag poles, hurricane shutters and more. Tapper screws are perfect for indoor and outdoor use. For light to medium duty applications.3. DEWALT DW5207 7-Piece Premium Percussion Masonry Drill Bit Set
Feature
The product is 7PC MAS Drill Bit SetEasy to use
The product is manufactured in Germany
Rock carbide tip maximizes carbide surface contact for longer bit life
Four-flute design cleans debris out for fast, efficient drilling
Three flats on shank eliminate bit slipping in chuck
For use with electric or cordless hammerdrills
Ideal for drilling holes in brick, block, concrete, and masonry
Description
Rock Carbide bits with four flute carbide head that provides longer bit life with a special enlarged flute design that channels debris out of the hole for fast, efficient drilling into masonry, concrete, rock, and artificial stone. The bits in this set are intended to make holes for mechanical anchors. No-Spin Shank to eliminate bit slippage; used with 3/8" and 1/2" sized chucks. Includes: 3/16"x3", 1/4"x4", 5/16"x6", 3/8"x6", 1/2"x6" and (2) 1/4"x6".4. Chenango Supply 3/16 x 1-1/4" Phillips Flat Head Concrete Screw Anchor. 100 pieces With Drill Bit (Miami-Dade Compliant) (3/16 x 1-1/4)
Feature
1000 Hour Salt Spray Test Coating5/32 Concrete Screw Drill bit included in box
These are commonly known as Tapcons
These Concrete screws are Miami-Dade Compliant
Phillips Flat Head Cuts its own threads in concrete
Description
Concrete Screws or "Tapcons" are great for screwing into concrete. Included masonry drill bit is 5/32" size. Used to anchor signs, fixtures to concrete and block buildings. These Concrete Screws have received Product Control Notice of Acceptance (No. 15-0930.14) from the Miami-Dade Department of Regulatory and Economic Resources, certifying that they meet all Miami-Dade Requirements.5. Hard-to-Find Fastener 014973325732 Cement Board Self-Drilling Screws, 8 x 1-1/4, Piece-172
Feature
Diameter: #8Length: 1-1/4 inch
Material: Steel
Finish: Grey Ceramic Coating
Head Style: Wafer (#2 Phillips Bit)
Description
We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.6. Rock-On 23301 9 by 1-1/4" Serrated Head Star Drive Cement Board Screws (185 Pack)
Feature
Serrated head for flush seatingStar drive with T-25 bit for one-handed installation
Serrated hi-low thread and sharp point for immediate pick up
Climacoat corrosion resistantfinish
Quantity: 185-per pack
Description
A standard screw gun with a depth sensitive nosepiece should be used to install cement board fasteners. For optimal fastener performance, the screw gun should be a minimum of 6 amps and have an RPM range of 0-2500. Adjust the depth to seat the head flush with the surface. Overdriving fasteners may result in torsional failure of the fasteners or strip out of the substrate. The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread.7. MKT Steel Conset Masonry Screw Anchor, Hex Washer Head Faced, 1/4" Diameter x 2-3/4" Length (Box of 100)
Feature
Commonly known as "Tapcon"High strength steel for use in all types of solid and hollow masonry, wood and stone
Fluorocarbon coating offers high resistance to corrosion; costing withstands 1000 hour salt spray test
Cuts its own threads; hex head version offers 2 drive methods
Fast, easy installation; drill bit included in each box
Description
MKT Fastening steel conset masonry screw anchor. Commonly known as "Tapcon". Made of high strength steel for use in all types of solid and hollow masonry, wood and stone. Fluorocarbon coating offers high resistance to corrosion; costing withstands 1000 hour salt spray test. Cuts its own threads; hex head version offers 2 drive methods. Fast, easy installation; drill bit included in each box. Softer base materials require undersized bits for best results.8. Chenango Supply 1/4 x 1-1/4" Hex Head Concrete Screw Anchor. 100 pieces With Drill Bit (Miami-Dade Compliant) (1/4 x 1-1/4)
Feature
1000 Hour Salt Spray Test Coating3/16 Concrete Screw Drill bit included in box
These are commonly known as Tapcons
These Concrete screws are Miami-Dade Compliant
Hex Head Uses 5/16" Nut Driver & Cuts its own threads in concrete
Description
Concrete Screws or "Tapcons" are great for screwing into concrete. Included masonry drill bit is 3/16" size. Used to anchor signs, fixtures to concrete and block buildings. These Concrete Screws have received Product Control Notice of Acceptance (No. 15-0930.14) from the Miami-Dade Department of Regulatory and Economic Resources, certifying that they meet all Miami-Dade Requirements.9. Backer-On 23406 9 by 1-1/4" Serrated Head Star Drive Cement Board Screws (750 Pack)
Feature
Serrated head for flush seatingStar drive with T-25 bit for one-handed installation
Serrated single lead thread and sharp point for immediate pick up
Climacoat corrosion resistantfinish
Quantity: 750-per pack
Description
A standard screw gun with a depth sensitive nosepiece should be used to install cement board fasteners. For optimal fastener performance, the screw gun should be a minimum of 6 amps and have an RPM range of 0-2500. Adjust the depth to seat the head flush with the surface. Overdriving fasteners may result in torsional failure of the fasteners or strip out of the substrate. The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread.10. Chenango Supply 1/4 x 1-3/4" Hex Head Concrete Screw Anchor. 100 pieces With Drill Bit (Miami-Dade Compliant) (1/4 x 1-3/4")
Feature
1000 Hour Salt Spray Test Coating3/16 Concrete Screw Drill bit included in box
These are commonly known as Tapcons
These Concrete screws are Miami-Dade Compliant
Hex Head Uses 5/16" Nut Driver & Cuts its own threads in concrete
