If you looking for cb firestik antenna with ground then you are right place. We are searching for the best cb firestik antenna with ground on the market and analyze these products to provide you the best choice.
Best cb firestik antenna with ground
1. FireStik FG4648-B Four foot No-ground plane CB antenna kit (Black)
Description
PURPOSE: The FGX-648 (where X = antenna length in feet) series, 'No ground plane" (NGP) CB antenna kits were specifically designed to solve the problems associated with the lack of ground plane. This normally occurs on vehicles constructed of plastic, fiberglass, wood or aluminum. Ground plane problems typically show up in the form of high standing wave ratio (SWR) and poor performance. The isolated ground plane that is built into the FGX-648 series kits can also eliminate problems on metal base vehicles that lack the sufficient ground plane for proper operation.COMPONENT INFORMATION:
ANTENNA: The antennas used in these kits is altered in order to maintain a desirable center band position when used with the tuned coaxial feedline. Accordingly, these antennas may only be used with the Firestik NGP cable. The antenna used in these kits have our patented "no tools required" tunable tip for fast and easy SWR adjustments. The rated wattage for these kits is 100 watts.
COAXIAL FEEDLINE: The seventeen-foot (5.2 M) coaxial cable used in these kits is of the highest quality. We use a multi-wire stranded center conductor to the prevent breakage that can occur with solid center conductor cable. The coaxial feedline serves as a tuned circuit that creates the necessary counterpoise. If a longer cable length is required, the user may add standard RG-58 A/U cable between the radio and system cable, preferably in lengths that are multiples of nine feet. Because it is a tuned circuit, the length cannot be reduced without causing non-repairable damage.
MOUNT, SPRING AND HARDWARE: To compliment the quality of the antenna and feedline, the mount used in these kits is our stainless steel, 3-way 90 angle mount. A stainless steel spring with machined brass ends acts as the coupling between the antenna and the feedline.
ADDITIONAL FEATURES: Each kit includes a FREE microphone hanger.
2. FireStik FG3648-B Three foot No-ground plane CB antenna kit (Black)
Feature
Firestik 3' (92cm) Single Mirror "NGP" Kit Complete (Black)Description
PURPOSE: The FGX-648 (where X = antenna length in feet) series, 'No ground plane" (NGP) CB antenna kits were specifically designed to solve the problems associated with the lack of ground plane. This normally occurs on vehicles constructed of plastic, fiberglass, wood or aluminum. Ground plane problems typically show up in the form of high standing wave ratio (SWR) and poor performance. The isolated ground plane that is built into the FGX-648 series kits can also eliminate problems on metal base vehicles that lack the sufficient ground plane for proper operation.COMPONENT INFORMATION:
ANTENNA: The antennas used in these kits is altered in order to maintain a desirable center band position when used with the tuned coaxial feedline. Accordingly, these antennas may only be used with the Firestik NGP cable. The antenna used in these kits have our patented "no tools required" tunable tip for fast and easy SWR adjustments. The rated wattage for these kits is 100 watts.
COAXIAL FEEDLINE: The seventeen-foot (5.2 M) coaxial cable used in these kits is of the highest quality. We use a multi-wire stranded center conductor to the prevent breakage that can occur with solid center conductor cable. The coaxial feedline serves as a tuned circuit that creates the necessary counterpoise. If a longer cable length is required, the user may add standard RG-58 A/U cable between the radio and system cable, preferably in lengths that are multiples of nine feet. Because it is a tuned circuit, the length cannot be reduced without causing non-repairable damage.
MOUNT, SPRING AND HARDWARE: To compliment the quality of the antenna and feedline, the mount used in these kits is our stainless steel, 3-way 90 angle mount. A stainless steel spring with machined brass ends acts as the coupling between the antenna and the feedline.
ADDITIONAL FEATURES: Each kit includes a FREE microphone hanger.
3. CB Wilson Firestik Francis Astatic Cb Radio Antenna Ground plane 3/8 x 24 Black Tip Mirror Trucker
Description
ANTENNA NO GROUND PLANE4. FireStik FG2648-B Two foot No-ground plane CB antenna kit (Black)
Feature
Manufactured to the Highest Quality Available.With True Enhanced Performance.
Latest Technical Development.
Description
PURPOSE: The FGX-648 (where X = antenna length in feet) series, 'No ground plane" (NGP) CB antenna kits were specifically designed to solve the problems associated with the lack of ground plane. This normally occurs on vehicles constructed of plastic, fiberglass, wood or aluminum. Ground plane problems typically show up in the form of high standing wave ratio (SWR) and poor performance. The isolated ground plane that is built into the FGX-648 series kits can also eliminate problems on metal base vehicles that lack the sufficient ground plane for proper operation.COMPONENT INFORMATION:
ANTENNA: The antennas used in these kits is altered in order to maintain a desirable center band position when used with the tuned coaxial feedline. Accordingly, these antennas may only be used with the Firestik NGP cable. The antenna used in these kits have our patented "no tools required" tunable tip for fast and easy SWR adjustments. The rated wattage for these kits is 100 watts.
COAXIAL FEEDLINE: The seventeen-foot (5.2 M) coaxial cable used in these kits is of the highest quality. We use a multi-wire stranded center conductor to the prevent breakage that can occur with solid center conductor cable. The coaxial feedline serves as a tuned circuit that creates the necessary counterpoise. If a longer cable length is required, the user may add standard RG-58 A/U cable between the radio and system cable, preferably in lengths that are multiples of nine feet. Because it is a tuned circuit, the length cannot be reduced without causing non-repairable damage.
MOUNT, SPRING AND HARDWARE: To compliment the quality of the antenna and feedline, the mount used in these kits is our stainless steel, 3-way 90 angle mount. A stainless steel spring with machined brass ends acts as the coupling between the antenna and the feedline.
ADDITIONAL FEATURES: Each kit includes a FREE microphone hanger.
5. Firestik LG4M2-W 4 Foot Firefly Cb No Ground Plane Antenna Kit White
Feature
Kit Includes: 4' Antenna, M-2 Side Mount, 17' Coax feedline w/ PL259 Connector, Microphone Hanger5/8 Wave Length Design Rated @ 100 Watts
3/8" x 24 Threaded Base
Requires Fine Tuning (SWR)
Easy-Tune Bare-Hands Tunable Tip
Description
The side mount in these kits is popular as a motorhome antenna mount. This in turn makes the kits very popular for motorhomes, especially when height is an issue. ANTENNA: The antennas used in these kits utilize the same 5/8 wave design as the patented tunable-tip FireFly antennas. The antennas frequency is altered in order to maintain a desirable center band position when used with the tuned coaxial feedline. Accordingly, these antennas may only be used with the Firestik NGP cable. The core material is a 5/16-" (0.313" or 8mm) diameter reinforced plastic (fiberglass) tube. FireStiks custom blended formula offers a preferred balance of flexibility and strength. The chrome plated machine brass mounting base has standard 3/8"-24 threads. A high efficiency, voltage increasing helical wind is utilized. Heavy insulated, light-gauge copper wire is used to guard against shorted coils and corrosion induced resistance. The antenna used in these kits have FireStiks patented "no tools required" tunable tip for fast and easy SWR adjustments. The rated wattage for these kits is 100 watts. Each antenna is covered with a static reducing, heavy PVC shrink tubing with both pigment and UV stabilizers mixed in. COAXIAL FEEDLINE: The seventeen-foot (5.2 M) RG-58 A/U coaxial cable used in these kits is of the highest quality. Due to the vibrations found on all mobile installations, a multi-wire stranded center conductor is used to prevent breakage. Surrounding the center conductor is a long life, flexible polyvinyl insulation. To guard against signal leakage, the center conductor is shielded with a copper wire braid that averages about 95% coverage (versus the industry standard of 70%). The coaxial feedline, besides being the conduit for the signal to reach the antenna, serves as a tuned circuit that creates the necessary counterpoise. If a longer cable length is required, the user may add standard RG6. Firestik LG3-M2B 3' No Ground Plane Tuneable Tip CB Radio Antenna Kit (Black)
Feature
Kit Includes: 3' black antenna, M-2 Side Mount, 17' Coax feedline w/PL259 Connector, Microphone Hanger5/8 Wave Length Design Rated @ 100 Watts
3/8" x 24 Threaded Base
Requires Fine Tuning (SWR)
Easy-Tune Bare-Hands Tunable Tip
Description
The 'No ground plane" CB antenna kits were specifically designed to solve the problems associated with the lack of ground plane. This normally occurs on vehicles constructed of plastic, fiberglass, wood or aluminum. An isolated ground plane is built into the NGP series kits to eliminate problems for vehicles that lack the sufficient ground plane for proper operation. Aside from vehicular installations, these kits can be mounted on a pack frame for hunting or Search and Rescue operations. Apartment dwellers can mount them on a balcony railing, or a temporary base station can set up in the forest using a tree for a tower. Kit Includes: Antenna, M-2 Side Mount, 17' Coax feedline w/PL259 Connector, Microphone Hanger, 3' Black Whip7. FireStik IBA-5 Indoor CB base antenna
Feature
Firestik 5' (152cm) Indoor CB Base AntennaDescription
IBA-5 Indoor CB base antenna8. Firestik FG4648-B 4 ft. - 122CM SINGLE MIRROR NGP KIT-BLACK
Feature
Firestik - fg4648-b 4 foot no ground plane cb single mirror mount antenna kit in blackDescription
4' No Ground Plane CB Antenna Kit - BLACKNo ground plane antenna system
Ideal for fiberglass vehicles like RV's and Semi Trucks
Includes all necessary components
4' 5 / 8 wave antenna
17' specialty no-ground coax cable
Tunable Tip
Full 40 Channel CB operation
9. Pro Trucker (WHITE) Wilson Firestik Francis Astatic Cb Radio Antenna Ground plane 3/8 x 24 Mirror Trucker by Wilson
Feature
Fits Standard 3/8" x 24 threaded antennaLower the angle of radiation on your antenna for GREATER range
WHITE mobile ground plane radial kit for CB radio antenna - 6 elements total
Helps with SWR
Overloaded Mobile Is An Authorized Re-Seller Of The Pro Trucker Brand
Description
Mobile ground plane radial kit for CB radio antenna. 6 elements... How it works: On a base loaded CB antenna like a Wilson 1000, it works as a ground plane or counterpoise to help radiate the signal - can use one above my coil on a center loaded HAM radio HF bug catcher antenna because it allows you to basically add the radials to the length of my antenna. It does this by lowering the angle of radiation for greater range and many people prefer this to what we call a capacity hat - the added horizontal radials allow the ability to run a shorter whip at the top. For use with a standard 3/8" x 24 threaded antenna.10. FIRESTIK K-4A CB RADIO ANTENNA HEAVY DUTY SO-239 STUD MOUNT (BULK)
Feature
FOR ANY 1/2" HOLEFITS ALL FIRESTIK ANTENNAS AND MOUNTS
BULK ITEM. NO RETAIL PACKAGE