If you looking for arduino mega wifi shield then you are right place. We are searching for the best arduino mega wifi shield on the market and analyze these products to provide you the best choice.
Best arduino mega wifi shield
1. KNACRO ESP8266 ESP-12E UART WIFI Wireless Shield Dev Board for Arduino UNO R3
Feature
Standard pin interface to achieve full compatibility with the pitch Arduino Uno, Mega and so on. (Unless the standard size arduino, such as Nano, Mini).3.3V power supply using advanced chip (with the official expansion board power chip CC3000 same), so 3.3V Arduino board provided more accurate, so ESP8266 as official cc3000 chip work as normal, there is no gap.
It leads to a WiFi module power supply / service interface to facilitate developers to extend the power supply and maintenance.
Onboard ESP8266-12 stable industrial grade serial WiFi module, using an enhanced PCB antenna, signal better.
You can quickly switch DIP switch ESP8266-12 industrial grade WiFi stable operation mode (such as operating mode and upgrade mode) module, integrated serial chip, quickly flashing the firmware
Description
Standard pin interface to achieve full compatibility with the pitch Arduino Uno, Mega and so on. (Unless the standard size arduino, such as Nano, Mini).3.3V power supply using advanced chip (with the official expansion board power chip CC3000 same), so 3.3V Arduino board provided more accurate, so ESP8266 as official cc3000 chip work as normal, there is no gap.
It leads to a WiFi module power supply / service interface to facilitate developers to extend the power supply and maintenance.
Onboard ESP8266-12 stable industrial grade serial WiFi module, using an enhanced PCB antenna, signal better.
You can quickly switch DIP switch ESP8266-12 industrial grade WiFi stable operation mode (such as operating mode and upgrade mode) module, integrated serial chip, quickly flashing the firmware.
Built-in 5V to 3.3V TTL level converter to prevent high-pressure Arduino TTL level of the WiFi module damage.
Onboard ESP8266-12 stable industrial grade WiFi module with a metal shield, immunity to interference.
Onboard ESP8266-12 standard pitch leads to a stable industrial grade WiFi module all interfaces, enabling developers to easily develop deep.
Use stackable design, it can continue to accumulate above the other modules, easy to use.
Onboard four LED displays the status of ESP8266, namely PWR, DFU, AP, STA
Package includes:
1*ESP8266 ESP-12E UART WIFI Wireless Shield Dev Board
2. WINGONEER ESP8266 WiFi Web Server Shield NodeMCU for Arduino Uno, Mega2560 similar CC3000
Feature
WiFi using industrial-grade chips ESP8266, modules for the ESP-13 with metal shield, anti-jammingStandard pin-compatible Arduino Uno, Mega2560 and other control board, Arduino UNO connection with the use of a voltage converter chip, so 3.3V and 5V are compatible
Serial port DIP switch with dual control, so the expansion board can be used alone as an Arduino Uno expansion boards, it can also be used as ESP8266 expansion board use
Real serial WiFi, Arduino program without any configuration
Based on WiFi Web Server configuration parameters and serial port parameters
Description
WINGONEER trademark Reg.NO :4747611WINGONEER ESP8266 WiFi Web Server Shield NodeMCU for Arduino Uno, Mega2560 similar CC3000
Specifications:
DC 3.3V-5V
Wireless 802.11 b / g / n standards;
Support for STA / AP two modes of operation;
Built-in TCP / IP protocol stack, you can configure a socket;
Supports standard TCP / UDP Server and Client;
The serial port baud rate support: 1200 / 2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 74800 / 115200 bps;
Serial data bits: 5 / 6 / 7 / 8 bits;
Serial Parity: None;
Serial port stop bits: 1/2 bit;
The standard Arduino UNO, Mega pitch;
Leads out Arduino Pin 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13;
Leads out ESP8266 GPIO 0 / 2 / 4 / 5 / 9 / 10 / 12 / 13 / 14 / 15 / 16 / ADC / EN / UART TX / UART RX;
RESET reset;
KEY multiplex configuration function keys;
Two DIP switches enable switching Arduino and ESP8266 serial port expansion;
WiFi current: continuous transmission: 70mA (200mA MAX), Standby: <200uA;
Wireless transmission rate: 110-460800bps;
The working temperature: -40 ~ + 125
Package included:
1 x WINGONEER ESP8266 Web Server Port WiFi Expansion Board ESP-13
3. Dragino Linux, Wifi, Ethernet, USB, All-in-one Yun Shield for Arduino Leonardo, UNO, Mega2560, Duemilanove
Feature
Support internet connection via LAN port, WiFi or 3G dongleOpen source Linux (OpenWrt) inside,Low power consumption
Compatible with Arduino IDE 1.5.4 or later, user can program, debug or upload sketch to Arduino board via Arduino IDE
Managed by Web GUI, SSH via LAN or WiFi,Built-in web server
Compatible with Arduino Leonardo, Uno , Duemilanove, Diecimila, Mega
Description
Yun Shield is one of the most powerful shields for Arduino Board. Yun Shield is designed to solve the Internet connectivity and storage issue for Arduino Board.Yun Shield runs Open Source OpenWrt system (Same system as runs in Arduino Yun) and it is fully compatible with Arduino IDE v1.5.4 or later. Yun Shield is the ideally choice for Arduino Projects which require various internet connections and more storage.
Basically, Yun Shield + Leonardo equally to the official Arduino Yun, but Yun Shield is more flexible because it can work with other Arduino board such as Uno, Duemilanove, Mega etc. And Yun Shield uses external wifi antenna which provides stability and possibility for various environments.
Features:
Open source Linux (OpenWrt) inside
Low power consumption
Compatible with Arduino IDE 1.5.4 or later, user can program, debug or upload sketch to Arduino board via Arduino IDE.
Managed by Web GUI, SSH via LAN or WiFi
Software upgradable via network
Built-in web server
Support internet connection via LAN port, WiFi or 3G dongle.
Support USB flash to provide storage for Arduino projects.
Failsafe design provides robustly system.
Compatible with Arduino Leonardo, Uno , Duemilanove, Diecimila, Mega
Specifications: Processor: 400MHz, 24K MIPS
Flash: 16MBytes
RAM: 64MBytes
Power Input: 4.75v ~ 23v via Arduino VIN pin
1 x 10M/100M RJ45 connector
150M WiFi 802.11 b/g/n
External Antenna via I-Pex connector
1 x USB 2.0 host connector, used for USB storage or 3G connection
1 x Reset button
Compatible with 3.3v or 5v I/O Arduino.
Package Include:
1* Yun Shield 1*PCB Antenna
4. WINGONEER ESP-12E ESP8266 UART WIFI Wireless Shield for Arduino UNO R3
Feature
Standard pin interface to achieve full compatibility with the pitch Arduino Uno, Mega and so on. (Unless the standard size arduino, such as Nano, Mini)3.3V power supply using advanced chip (with the official expansion board power chip CC3000 same), so 3.3V Arduino board provided more accurate, so ESP8266 as official cc3000 chip work as normal, there is no gap.
It leads to a WiFi module power supply / service interface to facilitate developers to extend the power supply and maintenance.
Onboard ESP8266-12 stable industrial grade serial WiFi module, using an enhanced PCB antenna, signal better.
Description
WINGONEER trademark Reg.NO:4747611WINGONEER ESP-12E ESP8266 UART WIFI Wireless Shield for Arduino UNO R3
Description:
You can quickly switch DIP switch ESP8266-12 industrial grade WiFi stable operation mode (such as operating mode and upgrade mode) module, integrated serial chip, quickly flashing the firmware.
Built-in 5V to 3.3V TTL level converter to prevent high-pressure Arduino TTL level of the WiFi module damage.
Onboard ESP8266-12 stable industrial grade WiFi module with a metal shield, immunity to interference.
Onboard ESP8266-12 standard pitch leads to a stable industrial grade WiFi module all interfaces, enabling developers to easily develop deep.
Use stackable design, it can continue to accumulate above the other modules, easy to use.
Onboard four LED displays the status of ESP8266, namely PWR, DFU, AP, STA
Package Included:
1x WINGONEER ESP8266 ESP-12E UART WIFI Wireless Shield TTL Converter for Arduino UNO R3 Mega
5. HiLetgo New Version ESP8266 NodeMCU LUA CP2102 ESP-12E Internet WiFi Development Board Open Source Serial Wireless Module Works Great with Arduino IDE/Micropython
Feature
ESP8266 CP2102 NodeMCU LUA ESP-12E WIFI Serial Wireless ModuleBuilt-in Micro-USB, with flash and reset switches, easy to program
Full I/O port and Wireless 802.11 supported, direct download no need to reset
Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython
Data download access to the website: http://www.nodemcu.com
Description
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.Instruction & Steps of How to use:
1. Download the Arduino IDE, the latest version.
2. Install the IDE
3. Set up your Arduino IDE as: Go to File->Preferences and copy the URL below to get the ESP board manager extensions: http://arduino.esp8266.com/stable/package_esp8266com_index.json Placing the http:// before the URL lets the Arduino IDE use it...otherwise it gives you a protocol error.
4. Go to Tools > Board > Board Manager> Type "esp8266" and download the Community esp8266 and install.
5. Set up your chip as:
Tools -> Board -> NodeMCU 1.0 (ESP-12E Module)
Tools -> Flash Size -> 4M (3M SPIFFS)
Tools -> CPU Frequency -> 80 Mhz
Tools -> Upload Speed -> 921600
Tools-->Port--> (whatever it is)
6. Download and run the 32 bit flasher exe at Github(Search for nodemcu/nodemcu-flasher/tree/master/ at Github)
github.com/nodemcu/nodemcu-flasher/tree/master/Win32/Release
Or download and run the 64 bit flasher exe at:
github.com/nodemcu/nodemcu-flasher/tree/master/Win64/Release
7. In Arduino IDE, look for the old fashioned Blink program. Load, compile and upload.
8. Go to FILE> EXAMPLES> ESP8266> BLINK, it will start blinking.
Data download access to the website:
http://www.nodemcu.com/index_en.html
Firmware link:
https://github.com/nodemcu/nodemcu-firmware
Note: Please contact us if you need the driver or meet any issue when using. We provide 100% satisfication service for customers.
Package included:
1* New Version ESP8266 NodeMCU LUA CP2102 WiFi Wireless Development Board
6. Integreight 1Sheeld+: The Arduino shield for iOS and Android
Feature
Experience over 40 Arduino shields on your iPhone and AndroidWorks with iPhone 4S and later generations (iOS 9 and above) and Android 4.3 and above devices
Compatible with most of the Arduino boards you love including Uno, Mega and Due
Includes sensor shields, input/output shields, communication shields and social media shields
Uses a standard Bluetooth module to HM-10 (BLE 4.0)
Description
Experience over 40 Arduino shields on your iPhone and Android. The 1Sheeld+ is an easily configured shield for Arduino. It has a built-in Bluetooth low energy module that gives to your Arduino the capability to connect itself to your iOS and Android phones. Thanks to the 1Sheeld app available on the App Store and Google Play Store you can easily associate your smartphone to it and turning your smartphone into a generic Arduino shield itself. Once connected you can control your Arduino with the smartphone sending data and controlling pins but you can also do the opposite. The 1Sheeld library gives to your Arduino the full control of the smartphone. So the Arduino can send e-mails, control the Camera, use Voice Recognition, send Facebook and Twitter notification and basically everything a powerful smartphone can do. What can you do with 1Sheeld? The sky is the limit! You have a powerful smartphone that can be used to control your RC car, tweet when plants are thirsty and have fun playing with your friends. We have already developed a variety of Arduino shields for 1Sheeld like: Arduino WiFi shield, Arduino IoT shield, Arduino Voice Recognition shield, Arduino GPS shield, Arduino Mp3 Player shield, Arduino Twitter shield, Arduino Facebook shield, Arduino Email shield, Arduino Camera shield, Arduino Toggle Button shield, Arduino Buzzer shield, Arduino Slider shield, Arduino LCD shield, Arduino 7-Segment shield, Arduino Keypad shield, Arduino Joystick shield, Arduino Keyboard shield, Arduino Data Logger shield, Arduino Accelerometer shield, Arduino GSM shield, Arduino NFC shield, and Arduino Microphone shield. And we have many other shields coming in the pipeline.7. KEYESTUDIO Esp8266 Wifi Module 2 Pcs for Arduino UNO R3 Mega 2560 Nano Micro Projects
Feature
KEYESTUDIO ESP8266 WiFi Module can easily give any microcontroller access to your WiFi network.Run out of the box that just simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers.
Supports APSD for VoIP applications and Bluetooth co-existance interfaces.
Contains a self-calibrated RF allowing it to work under all operating conditions, and requires no external RF parts.
This module has a powerful enough on-board processing and storage capability.
Description
KEYESTUDIO- specialized in creating high quality, innovative, user-friendly open source hardware, such as micro-controllers, shields, sensors, display, learning kits, robotics and more for Arduino, Raspberry PI, STM32, 51, MICRO BIT etc8. OSOYOO ESP8266 Web Server Serial Port WiFi Shield Expansion Board ESP-13 Compatible for Arduino UNO R3 MEGA 2560
Feature
WiFi using industrial-grade chips ESP8266, modules for the ESP-13 with metal shield, anti-jammingBased on WiFi Web Server configuration parameters and serial port parameters.
Description
User Manual: http://osoyoo.com/2016/09/18/esp8266-uart-wifi-shield-use-guide/Features:
Real serial WiFi, Arduino program without any configuration
User Manual: https://fineshang.gitbooks.io/esp8266-based-serial-wifi-shield-for-arduino-user/content/
Specification:
Wireless 802. 11 b /g /n standards
Support for STA / AP two modes of operation
Built-in TCP / IP protocol stack, you can configure a socket
Supports standard TCP / UDP Server and Client
The serial port baud rate support: 1200 / 2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 74800 / 115200 bps
Serial data bits: 5 / 6 / 7 / 8 bits
Serial Parity: None
Serial port stop bits: 1/2 bit
The standard Arduino UNO, Mega pitch
Leads out Arduino Pin 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13
Leads out ESP8266 GPIO 0 / 2 / 4 / 5 / 9 / 10 / 12 / 13 / 14 / 15 / 16 / ADC / EN / UART TX / UART RX
RESET reset
KEY multiplex configuration function keys
Two DIP switches enable switching Arduino and ESP8266 serial port expansion
WiFi current: continuous transmission: 70mA (200mA MAX), Standby: < 200uA
Wireless transmission rate: 110-460800bps
The working temperature: -40 ~ + 125
Package include:
1 x ESP8266 Web Server Port WiFi Shield Expansion Board ESP-13 for Arduino UNO Mega 2560
9. WINGONEER 4 Channel 5v Relay Shield Module, Four Channel Relay Control Board Relay Expansion Board for Arduino UNO R3 Mega 2560
Feature
This relay module is 5V active low.It is an 4-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as For Arduino, AVR, PIC, ARM, PLC, etc.
It is also able to control various appliances and other equipments with large current.
Standard interface can be directly connected with microcontrollers.
Red working status indicator lights are conducive to the safe use.
Description
WINGONEER trademark Reg.NO:4747611WINGONEER 4 Channel 5v Relay Shield Module, Four Channel Relay Control Board Relay Expansion Board for Arduino UNO R3 Mega 2560
Description:
Relay Shield (ie 5V Quad Relay Module) is a small current signal control power equipment commonly used electronic module, enabling high-power single-chip control devices are widely used in SCM system to make smart home project; and can be directly plugged into the compatible the use of various types of motherboards, eliminating the patch cable troubles.
Module features are as follows:
Standard For Shield interfaces and shape
Can continue to stack other For expansion boards
M3 screw positioning holes for easy installation
High Drive (5V or 3.3V) normally open contact closure
Onboard relay indicator (red)
Special Note:
When using the For UNO board connected to it, because UNO USB interface is extremely high, should avoid green terminals are shorted its shell.
Relay Shield Interface:
Relay: sky- 5V DC relay , model HJR-4102-L-5V, which Relay1 behalf of the 1st relay , the other and so on.
Power Interface : 5V DC power interface
Indicator: four lights are red when the relay is driven high , the corresponding indicator will light up .
Relay Terminals: Terminal high-power , high-current high voltage can be connected to the device . The 1st foot ( i.e. NOx) is a normally open pin , NCx pin is normally closed , COMx is common, i.e., when the relay is not driven , NOx and COMx open between two pins , NCx and COMx connection ; When the relay (x) control signal pin is high drive relays , NOx and COMx connection open between NCx and COMx.
Package includes:
1 x 4 Channel Relay Module
10. A&R Nano Uno Mega Monster Starter Kit for Arduino, All Main Boards, 25 Sensor Modules with Bluetooth WiFi Ethernet for STEM Electronics Projects
Feature
Includes three 100% Arduino-compatible flagship main boards - the UNO R3, MEGA 2560 and NANO V3Large set with 500+ individual components featuring the most common sensors and modules for beginners or advanced users
Build next-level wireless and internet projects with HC-05 Bluetooth, ESP8266 Wi-Fi Module, 2x NRF24L01 Wireless Tranceiver and W5100 Ethernet Shield
All-in-one complete bundle with plenty of extra accessories and link to free PDF tutorial guide file to help you get started quickly
Technical support with 90 day replacement guarantee on all parts. Comes in a 15" x 12" adjustable-compartment organizer box for safe transport and storage
Description
Earth's largest starter kit for Arduino.Monster package with everything you need to get serious with electronics and the Arduino system. Over 500 parts providing potential for building limitless project combinations and ideas. Monster Includes: NANO V3UNO R3MEGA 2560HC-05 Bluetooth Module ESP8266 Wifi ModuleW5100 Ethernet Shield2x NRF24L01 Wireless Transceiver ModuleRC522 RFID KitIR Remote KitUNO R3 Protoshield4x4 Membrane Keypad 1602 LCD w/ i2C BackpackUltrasonic Range SensorSound Sensor
PIR Motion Sensor
Impact Switch Switch SensorPhoto Interrupter SensorGY68 Barometric Pressure SensorLine Tracking SensorIR Flame SensorHall Effect SensorDHT11 Temperature & Humidity Sensor Vibration Sensor
IR Obstacle Avoidance SensorMQ3 Alcohol SensorMQ9 Combustible Gas Sensor Soil Moisture SensorRain Level SensorGY521 3-Axis Gyro & Accelerometer Module
ISD1820 Voice Recording ModuleDS3231 Real Time Clock ModuleRotary Encoder ModuleLaser Diode Module1 Digit 7 Segment LED Display4 Digit 7 Segment LED DisplayMAX7219 8x8 LED Matrix Display
5V DC Hobby Motor5g Servo5V DC Stepper Motor + ULN2003 Stepper Motor Driver 9V 1A Power Supply5V 1-Channel Relay ModuleUSB Charger Doctor Piezo Buzzer700-Point BreadboardPS2 JoystickShift RegisterL239D Motor DriverNPN TransistorThermistor9V Battery Connector2x Photoresistor2x Ceramic Disk Capacitor1N4004 Diode30x Resistor (100R, 220R, 1K, 4.7K, 10K, 47K,100K,1M) 3x LED White, Red, Yellow, Green, Blue 2x RGB LED6x Breadboard Button2x Potentiometer (10K, 100K) 2x 3-Pin Slider Switch2x 40-Pin Male Header40x Female-Male Jumper Wires
40x Male-Male Jumper Wires40x Female-Female Jumper Wires
