Finding the best maker select v2 glass suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best maker select v2 glass
![[Gulfcoast Robotics] Borosilicate Glass for Wanhao Duplicator i3 Anet A8 MP Maker Select 3D Printers, 4mm Thick.](https://images-na.ssl-images-amazon.com/images/I/51RX52S%2BXIL.jpg)
![[Gulfcoast Robotics] Borosilicate Glass Print bed for RepRap 3D Printer Mendel or Prusa i3, 213x200mm.](https://images-na.ssl-images-amazon.com/images/I/31ac%2BIOtsOL.jpg)
1. [Gulfcoast Robotics] Borosilicate Glass for Wanhao Duplicator i3 Anet A8 MP Maker Select 3D Printers, 4mm Thick.
Feature
Thick 4mm glass plate will not warp or bend under heatCompatble with Maker Select, Wanhao Duplicator, Anet A8 and other 3D Printers
219x219mm outer size, see attached drawing for details.
Plate perfectly matches larger aluminum plates 220x220mm on Wanhao Duplicator i3, MP Maker Select, Anet A8
100% Borosilicate glass content
Description
100% borosilicate glass, flat, heat resistant plate, does not warp during long term use. 4mm thick - will not break when you remove your print from it.
Plate fully matches 220x220mm heated bed on many popular 3D printers. This plate is larger and thicker than typical 3mm plates sold for use with MK2 heated beds.
Borosilicate glass material has excellent thermal and chemical properties compared to soda lime glass. Resists cracking due to direct high heat, perfect for a 3D printer bed. It is used on top of your heated print bed and provides excellent results. Please make sure your 3D printer will accept this size before making purchase.
Please take a look at the supplied drawing for dimensions and details.
Glass plate features:
Dimensions: 219x219mm, 4mm thick.
100% borosilicate heat resistant glass (it has yellow tint as opposed to soda lame glass green tint).
Cut corners to clear with mounting screws.
Very flat and does not warp during use.
Can be used as 3D printer print surface, with or without heater board.
Package Contents:
1 x Borosilicate Glass Print Surface 219x219mm x 4mm thick.
2. Wisamic Borosilicate Glass Heated Bed 220x220x3mm for 3D Printers MK2/MK2A, Anet A8, Anet A6, Reprap, Mendel
Feature
100% borosilicate glass. Borasolicate glass is rated for higher temperatures than normal sheet glass. Flat, heat resistant plate. Does not warp during long term use.Conducts heat evenly across the build surface to ensure consistent temperature throughout the build surface.
High binding power when heating. Easy to separate the plastic parts when cooling.
Get you out of the trouble when plastic film decreased viscosity after a period of usage.
Specially designed to fit the 3D Printers MK2/MK2A, Anet A8, Anet A6, Ultimaker 2+, Reprap, Mendel. NOTE: NOT fit for Ender 3 because 220*220mm is the bulid size of Ender 3, the actual headbed size of Ender 3 is 235*235mm.
Description
If you want to make your printing platform flat enough, ideal stuff is glass sheet. Borosilicate glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed. After cracking a few sheets of normal glass from rapidly cooling or heating, borosilicate glass will quell your frustrations. NOTENOT fit for Ender 3 because 220*220mm is the bulid size of Ender 3, the actual headbed size of Ender 3 is 235*235mm. Features:
* Borosilicate is a very high temperature glass. It has a melt temperature of about 800 C and a very low thermal expansion coefficient.
* Resistant to thermal shock compared to regular glass.
* Prepare a second plate and quickly switchplates when a model finishes printing. This significantly reduces printer idle time between prints.
* Reduces warping, however platform has to be properly leveled as is the case with any platform on a 3D printer. Specification:
Material: 100% Borosilicate
Size: 220x220x3mm
Thickness: 3mm Package content:
1 x 220x220x3mm Borosilicate Glass
3. Wisamic Borosilicate Glass Heat Bed 200x200x3mm for 3D Printers Prusa, Monoprice Maker Select V2, Monoprice Maker Select Plus, etc
Feature
100% borosilicate glass. Borasolicate glass is rated for higher temperatures than normal sheet glass. Flat, heat resistant plate. Does not warp during long term use.Conducts heat evenly across the build surface to ensure consistent temperature throughout the build surface.
High binding power when heating. Easy to separate the plastic parts when cooling.
Get you out of the trouble when plastic film decreased viscosity after a period of usage.
Specially designed to fit the 3D Printers Prusa, Monoprice Maker Select V2, Monoprice Maker Select Plus, etc
Description
If you want to make your printing platform flat enough, ideal stuff is glass sheet. Borosilicate glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed. After cracking a few sheets of normal glass from rapidly cooling or heating, borosilicate glass will quell your frustrations. Features:* Borosilicate is a very high temperature glass. It has a melt temperature of about 800 C and a very low thermal expansion coefficient.
* Resistant to thermal shock compared to regular glass.
* Prepare a second plate and quickly switchplates when a model finishes printing. This significantly reduces printer idle time between prints.
* Reduces warping, however platform has to be properly leveled as is the case with any platform on a 3D printer. Specification:
Material: 100% Borosilicate
Size: 200x200x3mm
Thickness: 3mm Package content:
1 x 200x200x3x3mm Borosilicate Glass
4. 220mm x 220mm Borosilicate Glass Plate/Bed w/Flat Polished Edge for MK2 MK3 Heated Bed 3D Printer
Feature
Size: 220mm x 220mm x 3mmTo print with ABS or PLA, lightly spray the surface of the glass with AquaNet hairspray, then install the glass.
Flat Polished Edge for safe to handle
Good fits Anet A8 and most of I3 MK2 MK3 Heated Bed 3D Printers
Designed by GO-3D Print in California
Description
Glass is a universal print surface for 3D Printing. Almost all types of filament will print to glass in one way or another. Just place the glass on your print board and clip it in place! To print with ABS or PLA, lightly spray the surface of the glass with AquaNet hairspray, then install the glass. For Nylon, we've found a light coating of UHU Glue stick seems to do the trick! If you don't yet have a glass surface, you'll want this one! This glass has been specially ordered and modified for use in 3D Printers. This type of glass is not available at your local hardware store or big box home center. Size: 8.66 x 8.66 x 0.125" (220mm x 220mm x 3mm), good fit most of I3 MK2 MK3 Heated Bed 3D Printers.5. Signstek 3D Printer MK2 MK3 Heated Bed Tempered Borosilicate Glass Plate 213x200x3mm
Feature
Made from tempered with high transparenceHigh binding power when heating, easy to separate the plastic parts when cooling
Avoid replacing plastic film
Get you out of the trouble when plastic film decreased viscosity after a period of usage
Material: Silicon glass
Description
If you want to make your printing platform flat enough, ideal stuff is glass sheet. Tempered Silicon glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed. After cracking a few sheets of normal glass from rapidly cooling or heating, tempered glass will quell your frustrations.Size: 213mm x 200mm x 3mm
Package includes: 1 x Smart glass
Please note: The other products show in the picture are not included!
6. 11.81x11.81x0.22 (300mm X 300mm) Tempered Glass Better Than Borosilicate Works W/Prusa, Mendela, AO Series
Feature
Superior to BorosilicateWorks with printers requiring Lulzbot TAZ
Ultra Precision & Super Strength
Ultra Rigid - Ultra Flat .220 inch (6mm) Glass Plate
Highly resistant to warping
Description
ZiggTech offers the absolute best 3D Printer Glass on the Market. Ultra Precision cut and ground Tempered Glass that's much better, stronger and safer than Borosilicate Glass. We offer Ultra flat, extra thick and highly durable tempered glass that is ideal for 3d printing due to resistance to thermal shock and high strength. Excellent adhesion of your projects allows for great prints with excellent surface finishes. ZiggTech glass has excellent thermal conductivity keeping the build surface temperature uniform, ensuring the best adhesion possible that is equal across your print. This is ideal for use with ABS or PLA materials, as well as many exotics such as carbon fiber or TPU, just apply AquaNet hairspray by lightly spraying the sheet with 2 or more coats and your prints will be stuck to the glass. Either clamp the glass to your build platform or glass holder and you will be ready to start printing with your new Glass Plate!7. 220mm x 220mm Borosilicate Glass Plate/Bed w/Corner Cut for Wanhan i3 Anet A8 MP Maker Select 3D Printer
Feature
Size: 220mm x 220mm x 3mm w/ corner cutTo print with ABS or PLA, lightly spray the surface of the glass with AquaNet hairspray, then install the glass.
Flat Polished Edge for safe to handle
Good fit Wanhao Duplicator i3 Anet A8 MP Maker Select 3D Printers
Designed by GO-3D Print in California
Description
Glass is a universal print surface for 3D Printing. Almost all types of filament will print to glass in one way or another. Just place the glass on your print board and clip it in place! To print with ABS or PLA, lightly spray the surface of the glass with AquaNet hairspray, then install the glass. For Nylon, we've found a light coating of UHU Glue stick seems to do the trick! If you don't yet have a glass surface, you'll want this one! This glass has been specially ordered and modified for use in 3D Printers. This type of glass is not available at your local hardware store or big box home center. Size: 220mm x 220mm x 3mm w/ corner cut, good fit Wanhao Duplicator i3 Anet A8 MP Maker Select 3D Printers8. [Gulfcoast Robotics] Borosilicate Glass Print bed for RepRap 3D Printer Mendel or Prusa i3, 213x200mm.
Feature
213x200x3mm - Perfect match for popular MK2B heated bed100% Borosilicate Glass
Use paper binder clips to attach glass to heated surface
Apply coat of hair spray or attach blue tape to make your print stick to the surface
Description
We sell REAL borosilcate glass. It has yellow tint, while most of the low cost glass plate are made of regular soda lame glass with green tint.
Borosilicate Glass print bed for Reprap style 3D printer. The material has excellent thermal and chemical properties compared to soda lime glass. Resists cracking due to direct high heat, perfect for a 3D printer bed. It is used on top of your heated print bed and provides excellent results. It's a direct fit for an MK1, MK2 or MK2a heated bed. Can be used on 3d printer builds that have a 213 mm x 200 mm print bed including Prusa i3 and i2, Prusa Mendel, Mendel, Mendel Max Einstein and many others.
Package Contents:
1 x Borosilicate Glass Print Surface 213x200mm x 3mm thick.
9. 3D Printer Borosilicate Glass Build Plate 220mm x 220mm x 3mm Glass Bed for MK2/MK2A,Wanhao Duplicator i3, Anet A8, Anet A6, MP Maker Select Reprap 3D Printer (220x220x3mm)
Feature
Made from tempered with high transparence.High binding power when heating, easy to separate the plastic parts when cooling.
Avoid replacing plastic film.
Get you out of the trouble when plastic film decreased viscosity after a period of usage.
Material: Borosilicate Glass.
Description
If you want to make your printing platform flat enough, ideal stuff is glass sheet.Tempered Silicon glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed.
After cracking a few sheets of normal glass from rapidly cooling or heating, tempered glass will quell your frustrations.
Size: 220mm x 200mm x 3mm
Package:
1 * Glass Plate (220x200x3mm)
