Finding the best flood zwave suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best flood zwave
1. Ecolink Zwave Plus Flood & Freeze Sensor, White (FLF-ZWAVE5-ECO)
Feature
ADVANCED TECHNOLOGY AND PRECISION: Easily to install sensor with 36in probe to quickly detect leak under sinks, behind refrigerators etc. before they turn into expensive repairs.FREEZE SENSOR: It triggers at 41F (5C) to notify you before a pipe freeze condition occurs or use it to tell your Z-wave thermostat to turn on/up the heat.
BATTERY LIFE: Five year battery life on one CR123A lithium battery.
Z-WAVE: Natively compatible with SmartThings, it works with most brands of Z-wave home security hubs like Vera Plus, Vera Edge, Vera Lite, HomeSeer, D-link staples connect and Piper NV. If your brand is not listed, (e.g. Wink or Alarm.com based security panels) compatibility cannot be guaranteed.
ECOLINK: Ecolink is a leading developer of low power, highly reliable wireless solutions, including a wide range of intelligent wireless security, sensing and home automation devices.
Description
With its advanced technology and precision, the Ecolink Flood and Freeze Sensor will alert you of flood, and damaging low temperatures. Its compact design makes it ideal for placement under sinks, next to toilets or other high risk areas that need protection.2. Fibaro Z-Wave Flood Sensor FGFS-101
Feature
The Ultimate Z-wave water leak sensor/detector, with temperature and tilt sensor.Get alerted immediately on your smart phone, tablet, or email when there is a leak. Trigger certain lights, activate specific scenes or even sirens to activate if there is a threat.
Three 24K plated gold telescoping feat always make sure its making contact even on uneven surfaces and never corrodes. Built for longevity..
Built in temperature sensor alerts through your smart hub's app and visually/ audibly at sensor if there is a sudden rise or fall in temperature.
Z-Wave Certifed Sensor: Certification ID ZC08-14070006 / Frequency Region: U.S./Canada/Mexico, Z-Wave Library Version: 4.55.00 **NOT HomeKit Compatible.
Description
TILT SENSOR Detects tilt and movement over 15 degrees. It will also alert you of any attempt to move or tamper with the device. ALARM SIREN Built in alarm siren will help you react quickly in case of a flood, rapid temperature change, or attempt to tamper with it. TELESCOPIC PROBES Fibaro Flood Sensor is the only one in the World to perfectly work on uneven surfaces thanks to gold telescopic probes, which are flexible enough to compensate for uneven surface levels. IN / OUT Input terminal allows for connecting an external probe and installing the sensor in any location. Output terminal allows for connection to an alarm system. VISUAL INDICATOR LIGHT Aside from the alarm siren, the device can alert you of a threat using color displays from the built in RGB diode. TAMPER PREVENTION Specially designed enclosure contains a tamper button, protecting it from being opened unintentionally. BATTERY POWERED A single battery is enough to power the Sensor for 2.5 years. TEMPERATURE SENSOR Built in temperature sensor may be used to manage a floor heating system or serve as a fire alarm sensor, by detecting rapid temperature rise. Hard wired Power or battery You can power the Flood Sensor by 12/24 VDC or a battery which will last 2,5 years The Sensor allows for integration with almost any available wired alarm system on the market. The Sensor allows for sending alarm notifications via wires or wirelessly. Visual Color Display One look is enough to find out what happened, thanks to the colored indicator light. Depending on the Flood Sensor's built-in LED illuminated color, you will know whether the Sensor has detected water, or a decrease / increase in temperature. With its built-in Z-Wave range tester you can easily determine whether the place you chose for the Sensor allows for communicating with the main controller or maybe you will have to use an external wired probe, to ensure the Sensor's proper operation.3. GoControl Bulbz Z-Wave Dimmable BR30 LED Indoor Flood Light - 2 Pack - LBR30Z-2 - Compatible with Alexa
Feature
LBR30Z-1: Dimmable LED flood light with near-daylight (5000k) illumination; Brightness: 650 lumens (Equivalent to 65 Watt incandescent light bulb); Power Consumption: 7.5 Watts; Bulb Lifetime: 25,000 hours (equivalent 22.8 years based on 3 hours/ day)PERFECT FOR: Recessed Can & Track-light Fixtures That Use Flood Lights Such As Kitchens, Bathrooms, Living Rooms & More
WORKS WITH: WINK HUB 2, Vera Secure, Vera Edge, Vera Plus, Samsung SmartThings, Fibaro Home Center 2, Fibaro Home Center Lite, and more! Ask seller about your specific Z-Wave hub integration.
Description
GoControl Z-Wave Dimmable LED Indoor Flood Light LBR30Z-1 - 2 PACK!The GoControl Dimmable Z-Wave LED Indoor Flood Light Bulb puts lighting control at your fingertips. Designed for recessed can lights or track light fixtures for flood lights, this bulb allows you to adjust your lighting using Z-Wave and your existing hub or controller with any mobile device or tablet. No complicated electrical wiring is required. This Z-Wave LED bulb provides energy savings over traditional flood light bulbs. It has a medium-cool 5,000K rating and includes a clip to keep the fixture's existing wall switch in the 'on' position.
Dimmable LED Indoor Flood Light (Z-Wave) At a Glance:
1. LED flood light with near-daylight illumination.
2. Programmable for remote use.
3. For 4-inch (or larger) can lights and track lights.
4. Compatible with Z-Wave hub or controller.
5. Compatible with 2GIG (or other) security and automation systems.
6. From Nortek, the #1 provider of smart Z-Wave products.*
4. Aeotec Water Sensor 6 Z-Wave Plus Flood Sensor, Freeze, Leak & Temperature Detector Water Sensor
Feature
Monitor and protect against leaks and floods in real-time. Super accurate; can detect as little as 0.03% of an inch of water. Simply place it down to install.Use with temperature control and floor heating systems; inbuilt temperature sensor can monitor between -4F to 212F.
Battery powered and water proof. 2.5 years battery life before batteries need changing. Battery included.
Inbuilt 60 decibel siren to notify you of leak or emergency.
Z-Wave Plus certified with open space wireless range up to 492 feet. Z-Wave Plus certification number: ZC10-17055598.
Description
Water Sensor 6. Your home's 6th sense. We protect our homes in so many ways. With smoke sensors, door locks, and security systems. But more homes are damaged each year by small leaks than by devastating fires or burglaries. Water Sensor 6 changes that, using Z-Wave Plus to silently monitor areas of your home at risk of water and then taking action when the worst occurs. Built upon Z-Wave Plus and Aeotec's Gen5 technology, Water Sensor 6 offers leak and flood detection, along with a temperature sensor for HVAC and underfloor heating management, and a 60dB siren to notify you of emergencies without having to refer to your Z-Wave gateway. Water Sensor 6 has been designed to work with certified Z-Wave gateways including Samsung SmartThings, Homeseer HS3, Clare Controls, Home Assistant, Jeedom, Open Z-Wave, Zipabox, ISY994i ZW.5. HomeSeer HS-FLS100+ Z-Wave Plus Floodlight Sensor
Feature
CONVENTIONAL FLOODLIGHT MODE: HS-FLS100+ can be used as a conventional motion-activated floodlight sensor to power floodlights when motion is sensed during dark hours. Controls are provided for manual adjustment of LUX sensitivity and floodlight ON times. WARNING - This sensor module is designed to replace CONVENTIONAL 120 VAC sensor modules. It is NOT COMPATIBLE with LOW VOLTAGE integrated LED fixtures.SMART FLOODLIGHT MODE: When added to a smart home system, HS-FLS100+ will send Z-Wave commands to the smart hub or home controller when motion is sensed and when the LUX level changes. Likewise, the smart hub or home controller can send Z-Wave commands back to the HS-FLS100+ to turn floodlights ON and OFF. This added functionality provides a very high level of flexibility not typically available in conventional motion-activated floodlights.
SMART SENSOR MODE: HS-FLS100+ can be installed and used simply as an outdoor motion and LUX sensor. Floodlight functionality is not required. This provides some interesting security and smart home possibilities.
CONTROLS OTHER HOME LIGHTING: Can be used to turn on interior lights when it gets dark outside | More accurate than typical SUNSET calculations (requires smart home controller or hub).
COMPATIBLE WITH HOMESEER & SMARTTHINGS: Requires latest HomeSeer Z-Wave driver ("plug-in") or SmartThings device handler (available from HomeSeer website).
Description
HS-FLS100+ is a Z-Wave-connected outdoor motion (PIR) and light (LUX) sensor that's designed to work with standard floodlight fixtures. It will sends Z-Wave commands when motion is sensed and when motion has not been sensed for a period of time. It will also send LUX information via Z-Wave commends. In "Standard" mode, HS-FLS100+ will automatically turn on floodlights (directly) when motion is sensed and LUX level is low. In "Controller" mode, HS-FLS100+ will only turn on floodlights when a Z-Wave command is received from the controller. These different modes provide for a variety of uses. WARNING: HS-FLS100+ is NOT for use with integrated low voltage LED floodlight fixtures. It is designed for use with CONVENTIONAL floodlight fixtures that include 120 VAC compatible sensors.6. GE Enbrighten Z-Wave Plus Smart Dimmer Switch, Full Dimming, In-Wall, Incl. White and Lt. Almond Paddles, Repeater/Range Extender, Zwave Hub Required, Works with SmartThings, Wink, Alexa, 14294
Feature
"ALEXA COMPATIBLE - REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus).Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required; Alexa device and hub sold separately).
Wirelessly schedule, control and adjust the brightness of any dimmable wall or ceiling light - control from anywhere, at any time with any mobile device.
For use with dimmable LED, CFL, incandescent and halogen bulbs. Full-range dimmability: cuts energy costs and extends bulb life.
Requires in-wall installation with hard-wired connections - Neutral wire REQUIRED. Includes white and light almond paddles (wall plate not included).
NOTE: Refer User Manual on Technical Specification before use
Description
Transform any home into a smart home with the GE Z-Wave Plus In-Wall 500S Smart Dimmer. You can create custom scenes and schedule timed events either when you're at home or when you're away. It provides ultimate flexibility for your home lighting and can be used in single or multi-switch applications.7. FIBARO Flood Sensor, Newest Z-Wave Plus Water Leak & Freeze Detector, FGFS-101 ZW5
Feature
Prevent water damage: use this compact sensor to reliably detect leaks in your laundry or boiler rooms. Hide it under the dishwasher or in the bathroom vanity for invisible monitoring. Receive alerts via text or email as soon as water is detected (z-wave system required, sold separately).And more: with a built-in temperature sensor, you can monitor your home for frozen pipes and respond sooner. The sensor is also equipped with a siren alarm to instantly notify anyone around about leaks. Use the smart led indicator to quickly determine if your sensor is within z-wave range.
Hub required: this sensor will work great with any open z-wave system like smartthings, vera, nexia, home center lite, or homeseer. It is not supported by wink or alarm panels (adt pulse, vivint, alarm, and others). this is the z-wave version, not for apple home kit.
Easy set-up: pull the battery tab, add it to your hub, and lay it down on any flat surface. The gold-plated probes will start protecting your home from water damage right then and there. The device will be ok even if water accumulates, it's the only water sensor that floats.
You're covered: this is a z-wave plus certified and ul listed device created and built in europe from quality materials. Support portal and documentation are available on the Fibaro website so if you ever need help, just ask!
Description
The Fibaro Flood Sensor is the most functional water leak sensor for your smart home. It is designed to either be placed on the floor or a wall with the gold-plated water-sensing probes Extended by a connected wire. The device can be battery* or VDC powered (12/24 VDC). it has a built-in tilt sensor that reports any movement of the device to the central Z-Wave controller. The Fibaro Flood Sensor is buoyant and can float on the waterfall surface. It has a built-in temperature sensor that can alert you if there is an increase or decrease in temperature, which can protect your home from damage caused by frozen pipes. The Fibaro Flood Sensor is compatible with most Z-Wave smart hubs such as Home Center 2 and Lite, SmartThings, HomeSeer, Vera, Clare Controls, and Nexia.8. GoControl Bulbz Z-Wave Dimmable BR30 LED Indoor Flood Light - LBR30Z-1
Feature
Uses 7.5w Of Energy But Provides 650 Lumens as Much Light As A Traditional 65w Incandescent Flood Light BulbMedium-cool 5,000k Light Appearance
Perfect For Recessed Can & Track-light Fixtures That Use Flood Lights Such As Kitchens, Bathrooms, Living Rooms & More
Includes Wall Light Switch Clip That Keeps The Light Switch On To Ensure The Z-wave Circuitry Inside The Flood Light Bulb Is Always Active
Dim: 5.38"h X 3.75" Dia
Description
The GoControl Bulbz Z-Wave 65-Watt LED Indoor Flood Light Bulb is a Z-Wave light bulb that has the characteristics consumers want in a flood light form factor with the added capability of remote and automation system control. It's a great solution for consumers who want to have scene or remote control on their recessed can lights or track lighting fixtures without having to mess with electrical wiring. It's as simple as screwing in the bulb.9. Samsung GP-U999SJVLCAA Smart things Water Leak Sensor - Automate Lights & Siren For Alert - ZigBee, White
Feature
Immediate Alerts: Get instant phone alerts at the first sign of excess water or moisture to prevent leaks and floodingNotification Options: Light or siren alerts turn on if water is detected where it doesn't belong and monitors temperature too (requires 32 to 104F operating temperature)
Accident Prevention: Program your connected smart devices to shut down electronics when abnormal moisture or temperature is detected
Requirements: Must have SmartThings App and SmartThings Hub or compatible device with SmartThings Hub functionality (connected devices sold separately)
Compatibility: works with Google, Alexa, SmartThings, and zigbee communication protocols
