Finding the best ramrod guide suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best ramrod guide
1. giRAMROD for Remington 700 ML 24" Barrel, 20 13/16" Long Rod (Once SpinJag is Attached 23" Overall Length) - SpinJag Sold Separately - Free Bore Guide
Feature
**Note: SpinJag is sold separately!giRAMROD allows you to keep your SpinJag on your ramrod and not stick out past the end of the barrel
This giRAMROD is designed only for the Remington 700 ML 24" Barrel
20 13/16" = Length of rod itself. 23" = Length once SpinJag** is attached. 9mm (0.355) diameter rod
Limited Time Offer: FREE Bore Guide with giRAMROD purchase- Begins On October 22, 2018
Description
The giRAMROD allows you to keep the SpinJag on your ramrod and for it not to stick out past the end of the barrel. It is a solid aluminum rod that is black anodized and tapped and threaded 10/32 on both ends. You can attach the SpinJag on one end and your extensions, handles, or anything with a 10/32 thread count to the other end. This giRAMROD is made to fit ONLY the Remington 700 ML 24" Barrel. The rod itself is 0.355 diameter and 20 13/16" long. Once you attach the SpinJag** to the giRAMROD it will come to an overall length of 23". **Note: The SpinJag is sold separately! If you have any questions about this product please message us!2. giRAMROD for Remington Model 700 Ultimate Muzzleloader 26" Barrel, 22 13/16" Long Rod (Once SpinJag is Attached 25" Overall Length) - SpinJag Sold Separately - Free Bore Guide
Feature
**Note: SpinJag is sold separately!giRAMROD allows you to keep your SpinJag on your ramrod and not stick out past the end of the barrel
This giRAMROD is designed only for the Remington Model 700 Ultimate Muzzleloader 26" Barrel
22 13/16" = Length of rod itself. 25" = Length once SpinJag** is attached. 0.368 diameter rod
Limited Time Offer: FREE Bore Guide with giRAMROD Purchase - Begins on October 22,2018
Description
The giRAMROD allows you to keep the SpinJag on your ramrod and for it not to stick out past the end of the barrel. It is a solid aluminum rod that is black anodized and tapped and threaded 10/32 on both ends. You can attach the SpinJag on one end and your extensions, handles, or anything with a 10/32 thread count to the other end. This giRAMROD is made to fit ONLY the Remington Model 700 Ultimate Muzzleloader 26" Barrel. The rod itself is 0.368 diameter and 22 13/16" long. Once you attach the SpinJag** to the giRAMROD it will come to an overall length of 25". **Note: The SpinJag is sold separately! If you have any questions about this product please message us!3. Gunn Innovations Bore Guide .45 - .58 Caliber
Feature
Designed for 3/8 diameter (0.375) ramrod or smallerDesigned for .45 - .58 Caliber muzzleloaders
Helps protect the crown of the rifling
Centers ramrod in barrel
Description
Even though the barrel is a harder metal than the typical ramrod, the repetitive rubbing will eventually damage the crown of the rifling, removing the lands from the end of the barrel adversely affecting your accuracy. But using the Bore Guide from Gunn Innovations will center the ramrod in the barrel to avoid any damage to your rifle. The Bore Guide is made to fit any ramrod 3/8 diameter (0.375) or smaller. It is also made to fit any muzzleloader .45 Caliber - .58 Caliber. Made from Delrin material.4. The Gunsmith's Manual: Practical Guide to All Branches of the Trade
Feature
Used Book in Good ConditionDescription
The real meat of the book, however, is the authors detailed instruction on gun care and maintenance. Specifics are offered on tools, workbench materials and setup, metalworking, working with wooden stocks, common repairs, and the process of browning, among many other topics. You can even improve your marksmanship with these expert shooting tips for a variety of firearms.
Although first published in the nineteenth century, The Gunsmiths Manualis highly relevant for todays firearms owners and tinkerers. The authors recommended procedure for removing a rusted-in screw, for example, is still widely used over 100 years later. You can learn to care for your rifle or shotgun as traditional gunsmiths would have. For both the historian and the firearms enthusiast,
The Gunsmiths Manual is an invaluable learning tool.
5. The Road to Key West, Marathon to Key West: The guide every local should have for their guest and every visitor should have by their side (2017 Edition)
Description
The Overseas Highway, US 1 in the FL Keys, is one of the most scenic roads in the country, and designated as such. Over 100 miles long and connected by 42 bridges, the road to Key West has many side roads and places that should not be missed - places that only locals know about - until now. Let this book be your Lower Keys guide and you will discover the best that the Keys has to offer. Written by Captain Brian Branigan of Keys Boat Tours, The Road To Key West includes Marathon, Bahia Honda, Big Pine Key, Big Torch Key, Ramrod Key, Summerland Key, Sugarloaf Key, The Saddlebunch Keys, Geiger Key, Stock Island, and Key West. You will discover swimming holes, walking trails, bike rides, places to kayak, sunset spots, bars and restaurants, and more. Whether your visit is two days or two months, we believe that you will find this information indispensable.
6. giRAMROD for Savage 10ML-II, 19 13/16" Long Rod (Once SpinJag is Attached 22" Overall Length) - SpinJag Sold Separately - Free Bore Guide
Feature
**Note: SpinJag is sold separately!giRAMROD allows you to keep your SpinJag on your ramrod and not stick out past the end of the barrel
This giRAMROD is designed only for the Savage 10ML-II
19 13/16" = Length of rod itself. 22" = Length once SpinJag** is attached. 0.368 diameter rod
Limited Time Offer: FREE Bore Guide with giRAMROD purchase - Begins On October 22, 2018