If you looking for toyota door lights logo then you are right place. We are searching for the best toyota door lights logo on the market and analyze these products to provide you the best choice.
Best toyota door lights logo
1. Bearfire 2 Pcs Wireless Car Door Led Welcome Laser Projector Logo Light Ghost Shadow Light Lamp Logos (Toyota)
Feature
100% Brand New Door Laser wireless sensor Light Lamps, Free replacement for the logo film slide,Powered by 3 Pcs AA batteries(Package Not Included)This product is wireless especially designed for auto modification fancier and it will not destroy the original car appearance bring more driving fun to drivers.
The dazzle logo light and the signal light will display on the ground when you open the car door and it will be turn off when you close the door.
It can be installed in both left & right door. Courtesy door light make your car artistic moreover the atmosphere.
Easy installation. No need drill hole. Just stick the light lamp on the door panel and stick the magnet on the bottom of the car frame. No harm to car.
Description
Brand new and high qualityEasily to install it yourself with the 3M adhesive sticker, no more troubles
of making holes.
Avoid to get off car on bad road, such as water marsh land.
Auto light up with the door opening.
Environmental, high power, high efficient, energy saving, no pollution, no
noise, no electronic interface.
Lighting steady and constant, clear and soft.
Size:62*67*14mm
Power Supply: 3x AAA battery
Install Instruction:
1. Install instruction about the batteries: Put 3 pcs AAA(1.5V) batteries in
the battery case and install them according to the positive & negative as
marked in the case. Then close the batteries case.
2. Install instruction of the shadow light: Stick the Magnet on the bottom of
the car frame. Stick the car light on the car door. The distance between
the Magnet & Car light is about 10mm. When you close the car door, the
Magnet is at the under face of the sensor on the car logo light.
3. Automatic Control & Manual Control: When you open the door, the logo
will be shown on the ground, and it will turn off automatically after 2
minutes. If you want the light on/off, just need to press the button on the
head of the light.
One set includes 2 pcs, suggest you buy 2 sets for 4 doors of your car!
Package includes:
2x Ghost Shadow Car Door LED Welcome Laser Projector Decoration
Logo Light
2. Bailongju Easy Installation Car Door LED Logo Projector Ghost Shadow Lights compatible with Toyota 2-pc Set
Feature
Compatible with toyota car,Installation is simple,Directly replace the original car door lightsNo drilling, no wiring, no disassemblying, no damage to your Car. Easy to install,It will only take you about 5 minutes.
When the door is opened, the LOGO is illuminated onto the open door surface to provide a light to aid entry into and out of the vehicle.
High Definition and Bright Projection.Using high brightness LED chip,Very bright lighting output,Very low power consumption.
Package includes 2 pieces lights, If you would like to use for 4 car doors, You need to order 2.
Description
This welcome lights is positioned into the under surface of the front doors. When the door is opened, the logo is illuminated onto the open door surface to provide a light to aid entry into and out of the vehicle. When you close the door, the logo light disappears.Compatibility :
4 Runner 2010 to 2018
Avalon 2005 to 2018
Camry 2007 to 2018
Highlander 2001 to 2018
Land Cruiser 2008 to 2018
Prius 2010 to 2018
Sequoia 2013 to 2018
Sienna 2011 to 2018
Tundra 2007 to 2010
Venza 2009 to 2018
Package Include:
2 pieces welcome light
Package Size: 9.5 * 3.8 * 9.5 (cm)
Installation Instructions:
1. Use A Flathead Screwdriver Or Installation Tool In The Package To Remove And Disconnect Original Door Step Lights;
2. Plug In new Door Lights With Correspondent Connector;
3. Put new Door Lights To The Spot Where Your Original Step Lights Were.
4. Done! Logo Should Be Projecting On To The Ground.
3. Toyota Compatible Logo Lights Ghost Lamp Accessories Door Lights Projector Easy Installation Welcome Emblem for Camry/Prius/Sequoia/Sienna/Tundra/Venza
Feature
Easy to install-Direct Replacement.No modifications required.No wire cutting.Please kindly make sure your car has original car door lights before placing order.Free from pollution, noise and electronic interference.Enviroment friendly material makes your car more safe.
Lasting constant, luminous uniformity, full of light and color.More visual enjoyment.
TOYOTA light is a new type of green light source for automobiles.Using high brightness LED chip,More bright and clear with High quality.
Super cool LED logo projection on the floor for TOYOTA. When you open the car door will automatically turn on the high-definition projection and automatically turn off
Description
1.Easy to install-Direct Replacement.No modifications required.No wire cutting.2.Package Included: 2 x TOYOTA LOGO Lights ,4 doors need 2 orders.Not applicable if the car does not have original door lights.
3.Clear bright laser LED car lights with welcome logo emblem projection for TOYOTA- Fashion light & shade visual experience for You!
Below for the year and model of your car.
4 Runner 2010 to 2018
Avalon 2005 to 2018
Camry 2007 to 2017
Highlander 2001 to 20182014 Except
Land Cruiser 2008 to 2018
Prius 2010 to 2018
Sequoia 2013 to 2018
Sienna 2011 to 2018
Tundra 2007 to 2010
Venza 2009 to 2018
Specification:
Input Power: 5w (each LED bulb) Voltage:DC 12/24v
Working Temperature:-40-105
Lower Power Consumption
How to replace car door light(Installation Instructions):
1. Use A Flathead Screwdriver to Remove and Disconnect Original Door Step Lights;
2. Plug in New Door Lights with Correspondent Connector;
3. Put new Door Lights to The Spot Where Your Original Lights Were;
4. Done! Logo Should Be Projected on The Ground.
Very important Notes:
1.Not applicable if the car does not have original door lights.
If you cannot confirm whether these lights are compatible with your car model or some installation problems, you can contact us at first!
4. Toyota LED Door Light Logo Projector Ghost Shadow Welcome Lamp Car Easy Installation forland Cruiser/Prodo/Sequoia/MarkX/Camry/Highlander/Corolla/Prius/Previa/TUNDRA/Alphard/GT86/VENZA/Sienna
Feature
HIGH DEFINITION and BRIGHT PROJECTIONHD projection,Using high brightness LED chips, very bright lighting output, and very low power consumption,The film projection can be replaced optionallyEASY INSTALLATIONPlug and play! No drilling, no wiring, no disassemblying, no damage to your car. Easy to install, directly replace the original car door lights, it will only take you about 5 minutes
HIGH HEAT DISSIPATION EFFICIENCYDoor Led lights made with nano-superconducting aluminum heat sink to ensure High temperature resistant and heat dissipation efficiency
BETTER COMPATIBILITYOriginal car decoding circuit chip,dedicated to the Toyota, and will suitable for most Toyota, pls refer to product description to check whether fit your Toyota or not
PACKAGE INCLUDED2 pieces lights per set, if you would like to use for 4 car doors, you need to order 2 sets.1 year CJS Glory warranty, no hassle on return or exchange
Description
Notes:If you cannot confirm whether these lights are compatible with your car model or some installation problems, you can contact us at first!
Better Compatibility:
2007-2017 land Cruiser
2010-2017 Prodo
2010-2018 Sequoia
2005-2017 Mark X
2006-2017 Camry
2009-2017 Highlander
2011-2017 Corolla
2005-2015 Prius
2006-2012 Previa
2017-2018 TUNDRA
2011-2015 Alphard
2013-2015 GT86
2007-2013 VENZA
2011-2015 Sienna
Specification:
Brand:CJS glory
Material:ABS+Aluminum alloy
Color temperature: 6000K
Voltage:12V
Output power:5W per bulb
Light Source Type:LED
Warranty:12 months
Package Included:
2 * BMW Welcome Lights
Instructions:
1.Use a flat head screwdriver to remove and disconnect the original door step lights
2.Plug in the new door lights with correspondent connector
3.Put the new door lights to the original spot
4.Done!
5. 2 PCS Car Projection LED Projector Door Shadow Light Welcome Light Laser Emblem Logo Lamps Kit for Toyota Special
Feature
NOTE: Keep door panel clear and dry , stick it with all your power ; .Projection design can warn others to avoid an accident
It will be brighter at night or at dark place,effect is not obvious at daytime.Light to open doors. Projection design can give others a warning to avoid an accident.
It can be installed in both left and right doors.door light will make your car look artistic.
light logo led auto door lights wireless ghost lights door ghost lights door logo projector lights door welcome logo lights car door shadow led projector car door led projector car door shadow laser projector led car logo door light wireless led door projector wireless car door projectors car door logo projector led logo projector light led door projector lights car door projector lights door laser projector logo laser led projector
This product is specially designed for auto modification fancier; we purpose to bring more driving fun to drivers;
Description
Only suit for below those type:
Land Cruiser 2003--2014
Prado 2004--2010
Sequoia 2010--2014
Reiz 2006--2014
Camry 2006--2011
Highlander 2009--2014
E'Z 2011--2012
Corolla 2007--2011
Prius 2006--2012
Previa 2006--2012
TUNDRA 2011
Alphard 2011--2014
Sienna 2011--2014
6. KNRAGHO Corolla Lights,Car Door LED Ghost Shadow Light Compliant for Camry/Highlander/4 Runner/Corolla/Venza/Tundra/Prius(4pcs)
Feature
Toyota Logo led light will be brighter at night or at dark place, effect is not obvious at daytime. Light to open doors. Projection design can give others a warning to avoid an accident. when you open the door, the car logo will be projected on the ground. when the door is closed, the light will be off automatically.Toyota car door light is specially designed for auto modification fancier; we purpose to bring more driving fun to drivers;
Welcome lamp is easy to install. No Rewiring, No Dissembling. No Damage to Your Car, just replace your car door light. It can be installed in both left and right doors. Shadow Light will make your car look artistic.
Keep car door panel clear and dry , stick it with all your power ;.Projection design can warn others to avoid an accident
Package Including :4pcs logo door lights for Toyota.
Description
Want to decorate your car without costing too much?
Come and choose knragho car door lights for Toyota. Clear Bright Laser LED Welcome Lights Door Logo Projection Emblem Light Kit for Toyota - Fashion Light & Shade Visual Experience for You !
*Reasonably priced
*Easy Install
*Bright and Sharp Image
*Cheap modification
This OEM welcome lights is positioned into the under surface of the front doors. When the door is opened, the logo is illuminated onto the open door surface to provide a light to aid entry into and out of the vehicle. When you close the door, the logo light disappears.
Suitable for:
Toyota
Toyota 4 Runner 2010 to 2017
Toyota Avalon 2005 to 2017
Toyota Camry 2007 to 2017
Toyota Corolla 2007 to 2017
Toyota Highlander 2001 to 2017
Toyota Land Cruiser 2008 to 2017
Toyota Prado 2004 to 2013
Toyota Prius 2010 to 2017
Toyota Reiz 2006 to 2017
Toyota Sequoia 2013 to 2017
Toyota Sienna 2011 to 2017
Toyota Tundra 2007 to 2010
Toyota Venza 2009 to 2017
Specifications:
Voltage: 12V
Color: white
Power consumption:3w
Material: ABS+Aluminum alloy
Installed simply,Good looking and Utility
Lower power consumption
Package Include:
2pcs /4pcs Toyota welcome light
Package Size: 9.5 * 3.8 * 9.5 (cm)
Installation Instructions:
1. Use A Flathead Screwdriver Or Installation Tool In The Package To Remove And Disconnect Original Door Step Lights;
2. Plug In new Door Lights With Correspondent Connector;
3. Put new Door Lights To The Spot Where Your Original Step Lights Were.
4. Done! Logo Should Be Projecting On To The Ground. If you are not sure of your car model, please contact us for advice before you place the order.
7. 2pcs Fit for Toyota Led Logo Projector Door Lights 3D Welcome Puddle Lights Ghost Shadow Courtesy Step Light for Runner Avalon Camry Highlander Land Cruiser Sienna Error Free Plug and Play 5W
Feature
Easy to install,Direct Replacement. No modifications required. No wire cutting. Please check whether your original car door light can be powered or not before purchasing.High definition car logo projection: Using high brightness LED chip, very amazing visual effect. For the real projection, please refer to the sixth image.
Compatible with TOYOTA cars: for 4 Runner/Avalon/Camry/Highlander/Land Cruiser/Prius/Sequoia/Sienna/Tundra/Venza/Alphard/Corolla/Crown/Previa/Reiz/Verso/EZ. Detailed compatible car models, please refer to the description page.
Package Included: 2pcs courtesy ghost shadow lights in the box, one for the left car door and the other one for the right car door.
We provide 30 days money back and one year replacement warranty-free of charge, lifetime support guarantee for verified defectively manufactured products. Buy it with confidence !
Description
For the real projection, please refer to the sixth image.
This welcome lights is installed into the under surface of the car doors. When the door is opened, the logo light is powered on and will be projecting onto the ground. When you close the door, the logo light disappears.
The lights can be compatible with TOYOTA cars:
4 Runner 2010 to 2017
Avalon 2005 to 2017
Camry 2007 to 2017
Highlander 2001 to 2017
Land Cruiser 2008 to 2017
Prius 2010 to 2017
Sequoia 2013 to 2017
Sienna 2011 to 2017
Tundra 2007 to 2011
Venza 2009 to 2017
Alphard 2011-2014
Corolla 2007-2011
Crown 2005-2013
Previa 2006-2012
Reiz 2006-2014
Verso/EZ 2011-2012
Attention please:
1. For above car models, before making order, please check whether your original car door light can be powered or not? If there is no power supply for your original door light, this items can't fit your car. Because even for the same model, some general configuration hasn't power supply for the door lights, only its deluxe configuration has power supply for the door lights.
2. For some cars, because of the position of the door lights, the light projection is hitting the door when it is opened, and therefore, only a part of projecting appears on the ground. If you mind it, please don't buy. Thanks for your understand.
Specification:
Current: 0.15MA
Input Power: 5W
Color Temp: 6500K
Voltage: DC 12/24V
Material: PVC
Chip: CREE
How to replace car door light(Installation Instructions):
1. Use A Flathead Screwdriver to Remove and Disconnect Original Door Step Lights;
2. Plug in New Door Lights with Correspondent Connector;
3. Put new Door Lights to The Spot Where Your Original Lights Were;
4. Done! Logo Should Be Projected on The Ground.
Package include:
Door light*2
8. Auto Sport Car Door Logo Shadow Projector LED welcome Light (toyota)
Feature
Easy to instal--No Drilling, No Disassemblying, No Damage To Your Car. Plug And Play.Pack of 2 pieces--led door logo light.If You Would Like to Use In 4 Car Doors, You Need To Buy 2 pairs
If you still are not sure whether an item fits your car or not, please feel free to ask us by sending us a message. It's our pleasure to answer your question.
Fit for 2009-2015 Highlander ,2011-2012 E'Z ,2006-2015 Camry ,2011-2014 Alphard ,2005-2015 Crown ,2006-2015 Reiz ,2007-2015 Corolla ,2004-2015 Prado ,2006-2015 Prius ,2003-2015 Land Cruiser ,2006-2015 Previa ,2011 TUNDRA ,2011-2014 Sienna ,GT FT 86 ,2010-2014 Sequoia
Description
Package included: 2 pcs Logo Shadow Lights = 1pair.Installation Instructions:
Firstly, use a flathead screwdriver or installation tool to remove and
disconnect original door step lights.
Secondly, plug in new door lights with correspondent connector.
Finally, put new door lights to the spot where your original door lights were
Fit for
2009-2015 Highlander
2011-2012 E'Z
2006-2015 Camry
2011-2014 Alphard
2005-2015 Crown
2006-2015 Reiz
2007-2015 Corolla
2004-2015 Prado
2006-2015 Prius
2003-2015 Land Cruiser
2006-2015 Previa
2011 TUNDRA
2011-2014 Sienna
GT FT 86
2010-2014 Sequoia
9. Fangfei 2x Wireless Laser Projector Car Door Step Courtesy Welcome Lights for Toyota Puddle Ghost Shadow LED Lights(For toyota)
Feature
Electromagnetic induction,wireless,no need drilling, Easy to remove and change.Electromagnetic induction, No need drill hole type.
Easy to install, Leading the trends of car.
Lighting sources, no pollution ,no noise. No electronic interference.
High efficient ,and energy saving ,environment friendly, Specially designed for auto modification fancier;bring more driving fun to drivers.
Description
Description:* Material: ABS Description:
* Power output: 7W Description:
* Size: 6.7cm x 6.2cm Description:
* Working voltage: 12V Description:
* Lamp Type: High Brightness LED Bulbs
10. 2pcs set High Power White LED Side Mirror Puddle Lights For Toyota Tundra 2007-2017
Feature
High brightness error free LED lights, replace your side mirror puddle/courtesy lamps (aka surrounding ambient lamps).2pcs set high power white LED side view mirror puddle light for TOYOTA Tundra 2007-2017year,maybe for your other car model if your original side mirror puddle light are the same shape and size as ours description, the original light are differ shape with our LED light,but need a little modification and can use it,if mind the loose issue and don't buy it100% plug and play with no modification needed,No Drilling, No Rewiring. Direct replacement your original halogen light with our super brightness LED puddle,say byebye to your orignal dull halogen lamp
Auto Grade super bright latest 18pcs 3528 SMDs technology Premium quality and auto grade 18pcs SMD LED(per light) giving out an intense xenon white light,Color may vary slightly due to the color setting of each individual monitor
Non-polarity LED puddle light with Built-in CAN-bus controller, complete no onboard computer error Constant current and intelligent decode make sure your car is safety
2pcs(left and right) irrespective of right or left Side Rear View Mirro Puddle LED Light Rear View Mirror Light Courtesy Welcome Light,its different and cool out of your old halogen lamp
Description
Specification:
We sell for pair of smd high bright error free led puddle lights. This item can replace your dull factory installed under mirror puddle/courtesy lights with these direct replacement LED units. They use the latest 3528 SMD LEDs technology each lightwith built in resisitors and circuit stabalisers to over come bringing up any error message on the dash.
100% plug and play No need for any modifications or rewiring - remove your old halogen lamps and plug these straight in. Direct OE replacements,very easy to install just need 1 minute finish
Each lamp used 18 SMD led's giving out an intense xenon white light.
our side view mirror projector compatible for TOYOTA Tundra 2007-2017year,pls send the original puddle light photo for double check if not sure
some trims have no mirror lights,pls send the original side view mirror light for double check if not sure,maybe fit for TOYOTA other model and year if your original mirror puddle light are the same shape and size as ours
Unlike other side view mirror puddle light, ours will produce a light to the ground with clear and brightness Do not sacrifice the light for just the logo.it features a high definition and super bright lighting output,and very low consumption as well.
Auto Grade super bright latest 18pcs 3528 SMDs technology - Reliable And High Brightness And Efficiency,say goodbye to orignal dull halogen light.Use the latest SMD LED technology, with built-in Can-bus controller, complete no onboard computer error.
Give out an intense xenon white light, lower power consumption.
with ultra sonic heated housing and best waterproof effection,Water Resistance Sealed plastic cover Constant current and intelligent built in Canbus decode more durable and safety for your car
