Finding the best spa up ph suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best spa up ph
1. Hot Tub Things pH and Alkalinity Up 2 Pounds - Protects Your Spa From Corrosion
Feature
Keep hot tub water in check -- this product increases pH and Alkalinity to obtain the proper balance!America's #1 Trusted Brand of Hot Tub Chemicals
Safety Tested to Assure Quality, Guaranteed Performance
Formulated Exclusively for Hot Tubs And Made from the Purest Chemicals Available
Compare to Leisure Time Alkalinity Increaser
Description
pH and Alkalinity Up will increase the pH and alkaline levels of your pool, spa, or hot tub water. The total alkalinity of spa water should be maintained between 80 and 150 ppm as determined by a suitable test kit. Maintain the pH within the desired range of 7.2 to 7.8.Use: pH and Alkalinity Up should be used as necessary when pH is below 7.2.
1. Determine amount of pH and Alkalinity Up to use.
2. Make sure equipment is OFF.
3. Add applicable amount of pH and Alkalinity Up to the spa water.
4. Turn on circulation system for 1-3 hours.
5. Retest water after 3 hours.
6. If pH is still below 7.2, repeat steps 1-5.
NOTE: For best results, dissolve granular products first by adding to a small, plastic pail filled with water. Then, apply the solution to the spa water.
About Us
Hot Tub Things is your premier source for spa parts and hot tub parts online. With over 30 years of experience in the hot tub industry, we are committed to high quality, low prices, and phenomenal customer service. We'd like your experience at Hot Tub Things to be a positive reflection of our commitment to these values. Whether you are looking for a custom spa cover, a hot tub ozonator, a spa cover lift, spa chemicals, a spa heater, a hot tub filter, a spa circuit board, or spa accessories, you have come to the right place!
2. Clorox Pool&Spa pH Up, 4-Pound 19004CLX
Feature
Raises pH to protect equipment and surfacesOptimizes sanitizer efficiency
Prevents eye irritation
Description
Clorox Pool&Spa pH Up raises the pH of acidic pool water that has a low pH level. Balancing your pool water ensures that it has an optimal pH level, including total alkalinity and mineral content levels. Use test strips or test kit to measure ph. The ideal pH for pool water is between 7.2 And 7.6. Follow dosage chart on Clorox Pool&Spa pH Up to adjust pH as needed.3. Leisure Time 22339-02 Spa Up for Spas and Hot Tubs, 2-Pounds, 2-Pack
Feature
Adjusts water pH and alkalinity upwardsFast-dissolving granular product
Easy to use
Description
Leisure Time Spa Up is a fast-dissolving granular product that gently adjusts water pH and alkalinity upward. Compatible with chlorine, bromine and iguanid sanitizers. Use as part of the Simple Spa Care Program. It is important to maintain the water's pH between 7.2-7.8. Low pH below 7.2) can cause corrosion and excessive sanitizer usage Compatible with chlorine, bromine and iguanid sanitizers. Applications: As Needed: 1) Make sure all equipment is OFF. 2) Add 1/4-ounce (1-1/2 tsp.) to the spa water. 3) Turn on circulation system for 30 minutes. 4) Retest water. If pH is still below 7.2 repeat steps 1-3. Tips: For best results, dissolve granular products first by adding to a small, plastic pail filled with water. Then, apply the solution to the spa water.4. Pool & Spa pH Increaser (Pure Soda Ash, Sodium Carbonate) (15 lb)
Feature
CORRECTS acidic Pool & Spa water quickly!REDUCES irritation to eyes caused by acidity
SLOWS down the rapid dissipation of chlorine caused by acidic water
REDUCES corrosion of pool equipment and etching of plaster pool walls
100% PURE Soda Ash or Sodium Carbonate
Description
Description: The active ingredient in our pH increaser is 100% PURE Soda Ash AKA Sodium Carbonate. This product will quickly correct acidic water conditions in your pool or spa. It will slow the rapid dissipation of chlorine caused by acidic water, reduce eye irritation, reduce corrosion of pool equipment and reduce etching of plaster pool walls. Our pool pH increaser comes in granular form so it's very easy to use. As the level of your pool's pH increases into the ideal range, your pool water will become safer and more pleasant to swim in. Dosage rates will vary depending on your pool's volume and current pH level, the initial dosage of our pool pH increaser is 1 pound per 10,000 gallons.5. Leisure Time Spa Balance Liquid Spa Up pH Increaser (30420A)
Feature
Spa water should be maintained at a pH of 7.2-7.8 and a total alkalinity of 80-120 ppm.This product should be used if the pH is above 7.8 or if the total alkalinity exceeds 120 ppm.
Compatible with all sanitizers including bromine, chlorine and biguanide
Raises pH and total alkalinity
Easier to use than granular balancers
Compatible with chlorine, bromine, ozone and biguanides
Solution requires no diluting
Pre-mixed - just add to spa; it is a part of the simple spa care program
Description
Convenient liquid Spa Up offers precise control of the adjustment of the spa or hot tub pH level. Pre-mixed liquid formula arrives ready to use, and does not require mixing or diluting before adding to the spa or hot tub. Fast acting liquid formula is easier to use than common granular spa water balancers. Compatible with bromine, chlorine and biguanide sanitizers. Instructions: Turn ON air blower or filter system. Add 1-ounce directly into spa. Retest water after 30 minutes. Follow steps 1-3 until pH and total alkalinity are in the range of 7.2-7.8 and 80-120 ppm respectively.6. SpaChoice 472-3-5041-02 Granular pH Increaser for Spas and Hot Tubs, 1-Pound, 2-Pack
Feature
Maintain Proper Water BalanceIncrease Spa Water pH
Easy to Use
Downloadable User Guide Available Under Product Information: Technical Specifications
Description
"Spa Choice pH Increaser raises the pH level of your spa water. Spa water should be maintained at a pH of 7.2 - 7.8. Test water frequently with a test kit or test strip to ensure the spa water pH levels remain in the recommended range. Spa Choice pH Increaser is compatible with all sanitizers including bromine, chlorine and biguanide. This product is used to raise the pH in spa water. The water in the spa should be maintained at a pH of 7.2-7.8 and total alkalinity from 80-140 ppm. Test water frequently with suitable test kit to ensure proper pH is maintained. This product is compatible with all sanitizers including bromine, chlorine and biguanide. This product should be used if pH is below 7.2. DIRECTIONS: 1. Turn on air blower, jets or filter system. 2. Premix 1 oz. of this product with water in plastic pail and add diluted product to spa. 3. Retest water after 30 minutes. 4. Follow steps 1-3 until pH and total alkalinity are in the range of 7.2-7.8 and 80-140 ppm respectively. Always wait 30 minutes between doses and test water before each addition of this product. "7. SpaGuard pH Increaser 1.12lb
Feature
SpaGuard Spa pH Increaser 18ozSpaGuard pH Increaser is a dry, granular product that gradually raises your pH level
Balances water for bather comfort
Protects your spa or hot tub from corrosion due to low pH
1tsp per 100 gallons of spa or hot tub water
Description
*Please Note: SpaGuard has a updated look. Same product, same size, new label. SpaGuard Spa pH Increaser will raise the pH of your spa or hot tub. When you use BioGuard spa care products (SpaGuard or Soft Soak), you are enlisting a group of individuals whose expertise is unsurpassed in the spa and pool industry. Whose dedication to helping you achieve perfect water no matter what the individual circumstance is their number one priority. Whose sole purpose is making your spa or pool the most enjoyable and trouble-free experience that you and your family will ever have. Whose dedication to the innovation and history of new product introductions is never matched, but often imitated. This dedication to service and the relentless pursuit of perfect water is inherent in the DNA of every BioGuard dealer.8. SpaGuard Spa Total Alkalinity - 2 Lb
Feature
SpaGuard Spa Total Alkalinity Increaser 2#1 tbs. per 100 gallons raises total alkalinity 25ppm
Eliminates pH Bounce that can occur in your spa or hot tub water
Helps prevent equipment and spa surface corrosion and damage
Spa or Hot Tub Alkalinity Increaser
Description
*Please Note: SpaGuard has new packaging as of 10/19/17. Same great product with updated labels. SpaGuards Total Alkalinity Increaser provides spa owners with a simple, effective treatment to combat low spa alkalinity, which if left untreated can cause corrosion damage, weaken your sanitizers ability to keep your spa clean, and cause skin and eye irritation. Total Alkalinity Increasers formula reverses these affects, as well as stabilizing your spas pH level to prevent pH bounce that can give spa owners headaches. Once applied, you can spend more time enjoying you spa rather than maintaining it. Product Dosage 1 tbsp per 100 gallons of water to raise alkalinity 25 ppm. Directions Use container cap as convenient measure. Use an accurate test method to determine alkalinity of water. Using rest results determine the required amount of SpaGuard Total Alkalinity Increaser needed to adjust the alkalinity to maintain a reading of 150 ppm. With pump running on high speed, pour the required amount directly into spa water and continue running pump for 30 minutes.9. Leisure Time Spa Balance pH Balance Plus (45410A)
Feature
One bottle treats up to 500 gallons of spa waterProper pH range for spa water is7.2-7.8.
Compatible with chlorine, bromine, ozone and mineral purification systems
Designed for use in hard water areas
Fast dissolving
Compatible with chlorine or bromine sanitizers.
Fast Dissolving, easy to use granular formula
Description
Lock in the proper pH level from refill to refill, even in hard water areas. Fast Dissolving, easy to use granular formula. Locks in the spa or hot tub pH level until the next refill. Compatible with chlorine or bromine sanitizers. Instructions: Add 1-1/2-pound (half the jar) of pH Balance Plus for up to 250 gallons of spa water or the entire 3-pound for up to 500 gallons of spa water. Pour directly into spa. Turn on jets and allow water to circulate for 15 minutes. Temporary cloudiness may occur, but the water will clear quickly once the product is fully dissolved. Repeat the application each time you refill your spa with fresh water.10. Spa Essentials 32518000 pH Increaser Granules for Spas and Hot Tubs, 18-Ounce
Feature
Raises pH and easy to useProtects corrosion of equipment due to low pH
Balances water for bather comfort
