Top 10 recommendation pci to sata card for 2019

When you looking for pci to sata card, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable pci to sata card is not an easy task. In this post, we show you how to find the right pci to sata card along with our top-rated reviews. Please check out our suggestions to find the best pci to sata card for you.

Best pci to sata card

Product	Features	Editor's score	Go to site
	IO Crest 4 Port SATA III PCI-e 2.0 x1 Controller Card Marvell Non-Raid with Low Profile Bracket SI-PEX40064		Go to amazon.com
	Ableconn PEX10-SAT 10 Port SATA 6G PCI Express Host Adapter Card - AHCI 6 Gbps SATA III Low Profile PCIe 2.0 Expansion Card		Go to amazon.com
	N N.ORANIE PCIe 2.0 x 1 to SATA III 4 Ports Adapter Card Marvell Chipset Non-Raid for IPFS Mining and Adding SATA 3.0 Devices		Go to amazon.com
	IO Crest 2-port SATA III PCIe 2.0 x2 Controller Card Green, SY-PEX40039		Go to amazon.com
	QNINE 4 Ports PCI SATA Raid Controller Internal Expansion Card with 2 Sata Cables, PCI to SATA Adapter Converter for Desktop PC Support HDD SSD		Go to amazon.com
	Syba 1 Port ATA133 IDE and 2 Port SATA II PCI Controller Card with Software RAID Component (SD-VIA-1A2S)		Go to amazon.com
	IO Crest SI-PEX40108 PCI-Express 2.0 x1 Low Profile SATA 4 Port SATA III PCI-e 2.0 x1 Card		Go to amazon.com
	IOCrest SATA II 4 x PCI RAID Host Controller Card SY-PCI40010		Go to amazon.com
	I/O CREST 4 Port SATA III PCI-e 2.0 x2 Non RAID Hard Drive Controller Card Marvell 9235 Chipset		Go to amazon.com
	Ableconn PEX-SA115 2-Port SATA 6G PCI Express Host Adapter Card - AHCI 6Gbps SATA III PCIe 2.0 Controller Card (Marvell 88SE9128 Chipset) - Support Hardware RAID 0, 1		Go to amazon.com

Related posts:

1. IO Crest 4 Port SATA III PCI-e 2.0 x1 Controller Card Marvell Non-Raid with Low Profile Bracket SI-PEX40064

Feature

We recommend a fresh Windows install with this card
Drivers are required for this card to function.
Chipset: Marvell 88SE9215
Compliant with PCI-Express Specification v2.0 and backwards compatible with PCIex1
Compliant with Serial ATA Specification 3.0
Supports Communication Speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps
Hot Plug and Hot Swap
4 Internal SATA 6Gb/s Ports
Compatible with SATA 6G, 3G and 1.5G Hard Drives
PCI-Express x1 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots

Description

PCIe x1 Interface Version 1.0, 4-Port Internal SATA 6Gbps Controller Card, Non-Raid, Marvell 88SE9215 Chipset, with Low Profile Bracket. IOCREST newest card with advance Marvell 88SE9215 Chipset single chip 4-port Gen III 6Gb/s host controller.

2. Ableconn PEX10-SAT 10 Port SATA 6G PCI Express Host Adapter Card - AHCI 6 Gbps SATA III Low Profile PCIe 2.0 Expansion Card

Feature

Adds 10 SATA 6G ports through a Low Profile PCIe 2.0 x2 card to your PC System. It's an ideal solution for surveillance users to install up to 10 SATA drives and/or ODD drives in one low profile PCIe card without driver installation required. It is not positioned for performance storage such as multiple SSD drives.
PCIe 2.0 x2 Low Profile PCIe form factor card on a regular size bracket with an additional Low Profile bracket included. Compliant with PCI Express v2.0 and backward compatible with PCI Express 1.x
Supports SATA I & SATA II & SATA III HDD, SSD, Optical Drive and Blu-Ray Drive. Support Native Command Queuing (NCQ), Hot plug and Hot swap SATA ports
No driver installation is required. The AHCI drivers are natively built-in on Windows 10, 8, 7, Vista, 2008, 2012, Linux, Mac 10.x and later.
Fully RoHS compliant. High quality product. Made in Taiwan.

Description

The Ableconn PEX10-SAT adds 10 SATA 6G ports through a Low Profile PCIe 2.0 card to your PC System. It's an ideal solution for surveillance users to install up to 10 SATA drives and/or ODD drives in one low profile PCIe card without driver installation required.

Specification
* Connector:
- 10 x SATA (7-pin, DATA) Female
* Chipset: ASMedia ASM1062 + 2x JMicron JMB575
* Data transfer rate:
- Up to 6 GBps
* Software:
- No driver installation required. The AHCI drivers are natively built-in on most Operating Systems
- Support Windows 10, 8, 7, Vista, 2008, 2012, Linux, Mac 10.x and later.
* 6Gbps SATA III Internal 10 Ports PCIe Gen2 2-lane Host Adapter
* Supports PCIe 1.0 and PCIe 2.0 motherboard
* Compliant with 10Gbps x2 PCI Express 2.0
* Fully compliant with Serial ATA specifications3.0
* Pin headers on board for activity indication on each channel
* Supports SATA III transfer rate of 6.0Gbps, 3.0Gbps, 1.5Gbps
* Supports ATA and ATAPI commands
* Supports SATA Hotplug, and Native Command Queuing (NCQ)
* Supports SATA I & SATA II & SATA III HDD, SSD, Optical Drive and Blu-Ray Drive
* Low Profile PCIe form factor card on a regular size bracket with an additional Low Profile bracket included
*Note: does NOT support SATA Port Multiplier
* BIOS on board supports Windows and Linux OS booting
* Fully RoHS compliant
* Made in Taiwan
Note: the product is not positioned for performance storage such as solid state drives. It's ideal for applications that need a lot of drives, or a huge capacity such as surveillance system, etc.

Package Contents
* Ableconn PEX10-SAT 10-Port SATA 6G PCIe Card
* 1x low profile PCIe bracket

3. N N.ORANIE PCIe 2.0 x 1 to SATA III 4 Ports Adapter Card Marvell Chipset Non-Raid for IPFS Mining and Adding SATA 3.0 Devices

Feature

PCIe X1 to 4 SATA 3.0 6Gbps interfaces; transfer speeds up to 6.0Gbps; backwards compatible with SATA 1.0/2.0 of 1.5/3.0Gbps.
PCI-Express V2.0 also compatible with PCI-Express V1.0, can be used on PCIe X2 X4 X8 X16 slots.
Port Multiplier FIS-based and Command-based switching supported; Chipset: Marvell.
Support Native Command Queue (NCQ); Support IDE/AHCI 1.0 mode; Compatible with SATA 6G, 3G and 1.5G Hard Drives; Support Hot Plug and Hot Swap; Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i.
Support Windows XP/Server 2003/Vista/7/8/10(32/64 bit)/Linux

Description

PCIe X1 to 4 SATA 3.0 ports controller card offers a simple connection between a host computer
and SATA 3.0 devices(SATA hard drive or SATA device), which allows 4 SATA devices at the speed
up to 6Gb/s.

Features
Serial SATA 3.0, compatible with SATA 2.0 and SATA 1.0
PCI-Express V2.0, compatible with PCI-Express V1.0
Support speed of 6.0Gbps, 3.0Gbps, and 1.5Gbps
Compatible with SATA 6G, 3G and 1.5G Hard Drives
Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i
Support 4 SATA 3.0 6Gbps devices
Support IDE/AHCI 1.0 mode
Support Native Command Queue (NCQ)
Port Multiplier FIS-based and Command-based switching supported
Support Hot Plug and Hot Swap
PCI-Express X1, can be used on PCIe X2 X4 X8 X16 slots
Support Windows XP/Server 2003/Vista/7/8/10(32/64 bit)/Linux


Package includes:
1 X PCIe X1 to 4 SATA 3.0 ports controller card
1 X Drivers CD

4. IO Crest 2-port SATA III PCIe 2.0 x2 Controller Card Green, SY-PEX40039

Feature

We recommend a fresh Windows install with this card
Drivers are required for this card to function.
ASM1061 Chipset (Asmedia 1061 SATA Host Controller)
Supports Hot Plug and Hot Swap
Supports Communication Speeds of 6.0Gbps, 3.0Gbps, and 1.5Gbps, 2 Ports Serial ATA, Native Command Queue (NCQ), Port Multiplier
Supports 2 Ports Serial ATA, Native Command Queue (NCQ), Port Multiplier
Works with SSDs
Supports Communication Speeds of 6.0Gbps, 3.0Gbps, and 1.5Gbps
Supports Port Multiplier

Description

The IO Crest 2 Port SATA III 6Gbps PCI-Express x1 Card is the easiest way to update any computer with SATA ports. Once installed this host card will add SATA ports with two independent channels. This allows support of two SATA devices at speeds of up to 6Gb/s whether it is a SATA hard drive or SATA device. The IO Crest 2 Port SATA III 6Gbps PCI-Express x1 Card is the easiest way to update any computer system.

5. QNINE 4 Ports PCI SATA Raid Controller Internal Expansion Card with 2 Sata Cables, PCI to SATA Adapter Converter for Desktop PC Support HDD SSD

Feature

Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.Note it is PCI card,NOT PCIE card ).
Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length.
The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports.
You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set.
SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ.

Description

Features:

* Stable and reliant Silicon Chipset SIL3114
* PCI specification revision 2.3 compliant w/ 32-bit 33/66Mhz host interface
* Serial ATA specification revision 1.0 compliant
* Data transfer rate up to 150MB/s. (1.5Gbps)
* Connect up to 4 SATA drives
* Plug & Play connection
* Software application included
* Raid Function: Integrated SATA Transport, Link logic, and PHY layer
* Supports 4 Independent Serial ATA channels
* Supports RAID 0, 1, 5, 0+1, JBOD12
* Supports 256-byte transmit and receive FIFOs
* Supports programmable and EEPROM, FLASH & EPROM loadable PCI class mode
* Supports ATAPI devices: CD-ROM, DVD-ROM, etc
* 48-Bit sector addressing Virtual DMA

Package Included:

1 x 4-Port SATA PCI Expansion Card
2 x SATA Cable
1 x Software CD

6. Syba 1 Port ATA133 IDE and 2 Port SATA II PCI Controller Card with Software RAID Component (SD-VIA-1A2S)

Feature

Transfer rate up to 1.5Gb/s

Description

The Sybil SD-LP-PEX2IR low profile 2 port SATA II phi-express X1 card offers simple connectivity between a host computer and SATA II devices. The controller card is backward compatible with SATA I devices, providing the versatility to use older storage, and features support for RAID 0 and 1 modes as well as port multiplier capability with command-based and FIS-based switching for connecting multiple external hard drives to a host PC through a single SATA connection.

7. IO Crest SI-PEX40108 PCI-Express 2.0 x1 Low Profile SATA 4 Port SATA III PCI-e 2.0 x1 Card

Feature

4 x SATA 6.0 Gb/s Internal Connectors
Up to 6 Gb/s
PCI-Express 2.0
Low Profile

Description

The PCI-e Controller Card gives you an easy way to add additional 4 internal SATA III ports to your computer by a single PCI Express slot. The SATA III ports offer a blazing-fast speed of 6Gbps, while remaining backwards compatible with the SATA I and SATA II specifications. Also, it supports Port Multiplier FIS Based or Command Based switching, ensuring maximum performance. Chipset: Marvell 88SE9215 Compliant with PCI-Express Specification v2.0 and backwards compatible with PCIe 1.x Compliant with Serial ATA Specification 3.0 Supports Communication Speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps Hot Plug and Hot Swap Supports Native Command Queue (NCQ) Supports Port Multiplier FIS Based Switching or Command Based Switching Compatible with SATA 6G, 3G and 1.5G Hard Drives SATA ports are bootable For port multiplier function, please follow Windows 8 instructions in Download's tab. Not a Hardware RAID controller. Supports 3TB and 4TB hard drives.

8. IOCrest SATA II 4 x PCI RAID Host Controller Card SY-PCI40010

Feature

Compatible with PCI specifications
Supports Plug & play and hot Plug
Compliant with SATAII Specification Revision 1.1
Compliant with Gen2i, Gen2m SATA II electrical Specification Revision 1.0
Backward compatible with SATA 1.0 Specification

Description

Brings new life to any old desktop PC. Connects up to 4 SATA II High speed SATA hard disk drives. Supports Windows 8 and server 2012.

9. I/O CREST 4 Port SATA III PCI-e 2.0 x2 Non RAID Hard Drive Controller Card Marvell 9235 Chipset

Feature

We recommend a fresh Windows install with this card
Drivers are required for this card to function.
Chipset: Marvell 88SE9235
Installed with a full profile bracket, Low profile included with the package
Port Multiplier FIS-based and Command-based switching supported
Supports SATA Rev 3.0 transfer speeds up to 6.0Gbps and backwards compatible with SATA I/II at 1.5/3.0Gbps
Supports Native Command Queue (NCQ)
4 Internal SATA 6Gb/s Ports
Compatible with SATA 6G, 3G and 1.5G Hard Drives
PCI-Express x2 Interface is Compatible with PCI-Express x4, x8, and x16 slots

Description

The SI-PEX40062 4 port SATA III PCI-E 2.0 X2 controller card marvel 88SE9235 chipset adds four SATA III ports to a computer through a PCI-E 2.0 X2 slot, delivering multiple internal 6Gbps connections for SATA III hard drives and SSDs. With full support for SATA 3.0 hard drives and data transfer speeds of up to 6 Gaps, the controller card features a native PCI Express single chipset that provides enhanced compatibility, reliability and performance for SATA 600 MB/s storage needs.

10. Ableconn PEX-SA115 2-Port SATA 6G PCI Express Host Adapter Card - AHCI 6Gbps SATA III PCIe 2.0 Controller Card (Marvell 88SE9128 Chipset) - Support Hardware RAID 0, 1

Feature

Supports SATA III transfer speeds up to 6.0Gbps; backward compatible with SATA I/II at 1.5/3.0Gbps
Built with Marvell 88SE9128. Supports Hardware RAID 0 and 1 modes
Support Port Multiplier FIS-based and Command-based switching
No driver installation is required on Windows 10/8/7/Vista, Server 2012/2008, Linux, Mac OS X 10.x and later.
High quality. Fully RoHS compliant. Made in Taiwan.

Description

Add two SATA 6G ports with up to 6 Gbps data rate to your computer.

Specification
* Connector:
- 2 x SATA (7 pin; DATA) Plug
- PCI Express x1 Male
* Chipset: MARVELL 88SE9128

* Software:
- No driver installation is required on Windows 10/8/7/Vista, Server 2012/2008, Linux, Mac OS X 10.x and later. The AHCI drivers are natively built-in on most Operating Systems
- Drivers are available for Windows XP

* Data transfer rate:
- Up to 6 Gbps
* Number of Ports That Support Port Multiplier: 2 (can only use 1 PM at a time)
* Number of Drives Supported Through Port Multiplier: 1 to 5

* 6Gbps SATA III Internal 2 Ports PCIe Gen2 x1 lane host adapter
* Hardware RAID controller to offload host CPU for max performance
* Supports PCIe 1.0 and PCIe 2.0 motherboard
* Compliant with 5Gbps PCI Express 2.0
* Fully compliant with Serial ATA specifications3.0 transfer rate of 6Gbps
* Supports SATA I & SATA II & SATA III HDD, SSD, Optical Drive and Blu-Ray Drive
* Supports Non-Raid, Hardware RAID 0, 1 for HDD & SSD
* Supports Non-Raid mode for Optical Drive and Blu-Ray Drive
* Supports ATA and ATAPI commands
* Supports SATA Hot-plug, and Native Command Queuing (NCQ)
* Supports one (1) Port Multiplier with FIS-based or Command-based switching
* LED Pin headers for LED activity indicators for each port
* Low Profile PCIe form factor card on a regular size bracket with an additional Low Profile bracket included
* BIOS on board supports Windows booting
* Fully RoHS compliant.
* Made in Taiwan

Package Contents
* Ableconn 2-Port SATA 6G AHCI PCI Express Host Adapter Card
* One (1) low profile PCIe bracket
* Quick Installation Guide

Warranty
* Limited One-Year Warranty and Lifetime Product Support

Conclusion

All above are our suggestions for pci to sata card. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using pci to sata card with us by comment in this post. Thank you!