Top 10 recommendation hammer drill anchor bit 2019

When you looking for hammer drill anchor bit, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable hammer drill anchor bit is not an easy task. In this post, we show you how to find the right hammer drill anchor bit along with our top-rated reviews. Please check out our suggestions to find the best hammer drill anchor bit for you.

Best hammer drill anchor bit

Product	Features	Editor's score	Go to site
	DEWALT DW5207 7-Piece Premium Percussion Masonry Drill Bit Set		Go to amazon.com
	MKT Steel Conset Masonry Screw Anchor, Hex Washer Head Faced, 1/4" Diameter x 2-3/4" Length (Box of 100)		Go to amazon.com
	Hiltex 10513 1-1/2 Inch SDS Rotary Hammer Drill | Includes Demolition Bits, Flat and Point Chisels		Go to amazon.com
	Bosch HCSTP2083 1/2 In. x 1-11/16 In. SDS-plus Stop Bit		Go to amazon.com
	CONFAST 1/4 x 1-1/4 Hex Head Concrete Screw Anchor with Drill Bit (100 per Box)		Go to amazon.com
	DEWALT DW5822 1-1/8-Inch by 18-Inch by 22-1/2-Inch 4-Cutter SDS Max Rotary Hammer Bit		Go to amazon.com
	DEWALT DW5701 3/8-Inch by 8-Inch by 13-Inch 2 Cutter Spline Shank Rotary Hammer Bit		Go to amazon.com
	CONFAST 1/4" x 2-3/4" Hex Head Concrete Screw Anchor with Drill Bit (100 per Box)		Go to amazon.com
	DEWALT DW5704 1/2-Inch by 11-Inch by 16-Inch 2 Cutter Spline Shank Rotary Hammer Bit		Go to amazon.com
	DEWALT DW5821 1-1/8-Inch by 10-Inch by 15-Inch 4-Cutter SDS Max Rotary Hammer Bit		Go to amazon.com

Related posts:

1. DEWALT DW5207 7-Piece Premium Percussion Masonry Drill Bit Set

Feature

The product is 7PC MAS Drill Bit Set
Easy to use
The product is manufactured in Germany
Rock carbide tip maximizes carbide surface contact for longer bit life
Four-flute design cleans debris out for fast, efficient drilling
Three flats on shank eliminate bit slipping in chuck
For use with electric or cordless hammerdrills
Ideal for drilling holes in brick, block, concrete, and masonry

Description

Rock Carbide bits with four flute carbide head that provides longer bit life with a special enlarged flute design that channels debris out of the hole for fast, efficient drilling into masonry, concrete, rock, and artificial stone. The bits in this set are intended to make holes for mechanical anchors. No-Spin Shank to eliminate bit slippage; used with 3/8" and 1/2" sized chucks. Includes: 3/16"x3", 1/4"x4", 5/16"x6", 3/8"x6", 1/2"x6" and (2) 1/4"x6".

2. MKT Steel Conset Masonry Screw Anchor, Hex Washer Head Faced, 1/4" Diameter x 2-3/4" Length (Box of 100)

Feature

Commonly known as "Tapcon"
High strength steel for use in all types of solid and hollow masonry, wood and stone
Fluorocarbon coating offers high resistance to corrosion; costing withstands 1000 hour salt spray test
Cuts its own threads; hex head version offers 2 drive methods
Fast, easy installation; drill bit included in each box

Description

MKT Fastening steel conset masonry screw anchor. Commonly known as "Tapcon". Made of high strength steel for use in all types of solid and hollow masonry, wood and stone. Fluorocarbon coating offers high resistance to corrosion; costing withstands 1000 hour salt spray test. Cuts its own threads; hex head version offers 2 drive methods. Fast, easy installation; drill bit included in each box. Softer base materials require undersized bits for best results.

3. Hiltex 10513 1-1/2 Inch SDS Rotary Hammer Drill | Includes Demolition Bits, Flat and Point Chisels

Feature

HIGH PERFORMANCE: 1,000 Watts motor delivers powerful 5 ft-lb impact energy to complete heavy duty projects on concrete, brick and solid steel
THREE FUNCTION MODES: hammer only (chiseling-only), hammer drill (hammering and rotation), and drill only (rotation only)
CAPACITY: 1-1/2" for concrete and 1" for steel, no load rotation speed 0 - 800 RPM; No load impact frequency 0 - 3500 BPM; 6 Various speed control
360 DEGREE SWIVEL: auxiliary handle with textured grip provides maximum control and comfort
SET INCLUDES: bonus accessory kit in blow mold case: 1-pc universal chuck with adaptor and key, 1-pc depth gauge, 1 bottle oil, 3-pcs 6" SDS drills (8mm, 10mm and 12mm), 2-pc 10" SDS chisels (flat and point)

Description

1.5-Inch Rotary Hammer Drill Three Function Combo, Hammer, Drill Tool. Rated Voltage: 110V/60Hz - Rated Power: 1100 Watts

4. Bosch HCSTP2083 1/2 In. x 1-11/16 In. SDS-plus Stop Bit

Feature

Stop collar prevents over-drilling for shallow anchor installations
Bosch manufactured carbide tip for long life
Better dust removal with spiral flute design
Most common shallow anchor diameters
SDS-plus shank

Description

Key masonry applications, ranging from suspension of struts for electrical and air systems to hardware for overhead piping and sprinkler systems, Bosch stop bits bring precision, speed and professionalism to a task once marked by guess work and drill bits marked with tape. Applications are designed to incorporate drop-in anchors. A steel collar on each bit marks the precise depth of the hole. Once the collar is flush with the concrete surface, the correct depth is reached.

5. CONFAST 1/4 x 1-1/4 Hex Head Concrete Screw Anchor with Drill Bit (100 per Box)

Feature

BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost
SLOTTED HEX HEAD-Can be driven with a nut driver
SELF-TAPPING-Taps threads directly into masonry and requires no other anchor
DIAMOND POINT-Easier to drive the screw to save time

Description

Applications
The anchor is made from Carbon Steel, and is Blue. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Dry environment.

Head Style
The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 3/16" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Driver Required
A 5/16" is required for driving the anchor into the base material.

Diameter of Anchor
The diameter of the anchor is 1/4".

Length Anchor
The length of the anchor is 1-1/4"

Thread Length
The length of the threads on the anchor is 1-1/4" in length.

Minimum Embedment
The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 0" to 1/4". This will ensure that the minimum embedment of 1" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4" diameter anchor requires the hole in the fixture to be 5/16".

Spacing between Anchors
Each anchor must be spaced a minimum distance of 4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 3" from an unsupported edge of the concrete.

6. DEWALT DW5822 1-1/8-Inch by 18-Inch by 22-1/2-Inch 4-Cutter SDS Max Rotary Hammer Bit

Feature

Innovative tip design maximizes carbide surface contact for longer life.
Open head design allows mill to easily enter the flutes for faster drilling.
Longer helix expedites mill removal from the hole for faster drilling.
Hardened core reduces bit breakage
Hardened core reduces bit breakage.

Description

The DW5822 SDS Max Rotary Hammer Bit handles the toughest concrete, stone, and other masonry materials with ease. Its Rock Carbide tip extends bit life much longer than other bits, and its tough steel construction makes this hammer bit durable and long-lasting. The DW5822's open head design helps channel dust and debris into the flutes for more efficient drilling, and the helix four-flute construction removes this debris from the drilling surface quickly for easier drilling. This bit measures 1-1/8 inches in diameter, 18 inches usable length, and 22-1/2 inches overall length.

7. DEWALT DW5701 3/8-Inch by 8-Inch by 13-Inch 2 Cutter Spline Shank Rotary Hammer Bit

Feature

ROCK CARBIDE tip maximizes carbide surface contact for longer bit life
U-Flute cleans debris out for fast, efficient drilling
Open head design channels dust into flutes for quicker drilling.
For use with all brands of spline rotary hammers
Used for drilling anchor and through holes in poured concrete and other masonry up to 2" diameter
ROCK CARBIDE tip maximizes carbide surface contact for longer bit life.
U-flute cleans debris out for fast, efficient drilling.

Description

115-DW5701 Features: -Rock Carbide tip maximizes carbide surface contact for longer life.-Open head design channels more dust out.-U-flute design maximizes bit strength.-Longer helix increased flute travel expedites dust removal.-Price is for 1 Bit.

8. CONFAST 1/4" x 2-3/4" Hex Head Concrete Screw Anchor with Drill Bit (100 per Box)

Feature

BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost
SLOTTED HEX HEAD-Can be driven with a nut driver
SELF-TAPPING-Taps threads directly into masonry and requires no other anchor
DIAMOND POINT-Easier to drive the screw to save time

Description

Applications
The anchor is made from Carbon Steel, and is Blue. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Dry environment.

Head Style
The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 3/16" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Driver Required
A 5/16" is required for driving the anchor into the base material.

Diameter of Anchor
The diameter of the anchor is 1/4".

Length Anchor
The length of the anchor is 2-3/4"

Thread Length
The length of the threads on the anchor is 1-3/4" in length.

Minimum Embedment
The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-1/4" to 1-3/4". This will ensure that the minimum embedment of 1" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4" diameter anchor requires the hole in the fixture to be 5/16".

Spacing between Anchors
Each anchor must be spaced a minimum distance of 4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 3" from an unsupported edge of the concrete.

9. DEWALT DW5704 1/2-Inch by 11-Inch by 16-Inch 2 Cutter Spline Shank Rotary Hammer Bit

Feature

ROCK CARBIDE tip maximizes carbide surface contact for longer bit life
U-Flute cleans debris out for fast, efficient drilling
Open head design channels dust into flutes for quicker drilling.
For use with all brands of spline rotary hammers
Used for drilling anchor and through holes in poured concrete and other masonry up to 2" diameter
ROCK CARBIDE tip maximizes carbide surface contact for longer bit life.
U-flute cleans debris out for fast, efficient drilling.

Description

115-DW5704 Features: -Rock Carbide tip maximizes carbide surface contact for longer life.-Open head design channels more dust out.-U-flute design maximizes bit strength.-Longer helix increased flute travel expedites dust removal.-Price is for 1 Bit.

10. DEWALT DW5821 1-1/8-Inch by 10-Inch by 15-Inch 4-Cutter SDS Max Rotary Hammer Bit

Feature

Innovative tip design maximizes carbide surface contact for longer life.
Open head design allows mill to easily enter the flutes for faster drilling.
Longer helix expedites mill removal from the hole for faster drilling.
Hardened core reduces bit breakage.; Hardened core reduces bit breakage.
Includes one SDS Max Rotary Hammer Bit

Description

The DW5821 SDS Max Rotary Hammer Bit handles the toughest concrete, stone, and other masonry materials with ease. Its Rock Carbide tip extends bit life much longer than other bits, and its tough steel construction makes this hammer bit durable and long-lasting. The DW5821's open head design helps channel dust and debris into the flutes for more efficient drilling, and the helix four-flute construction removes this debris from the drilling surface quickly for easier drilling. This bit measures 1-1/8 inches in diameter, 10 inches usable length, and 15 inches overall length.

Conclusion

All above are our suggestions for hammer drill anchor bit. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using hammer drill anchor bit with us by comment in this post. Thank you!