Finding the best directv dish wall mount suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best directv dish wall mount
1. DIRECTV New Foot MAST Wall & ROOF Mount 2" OD SLIMELINE HD Dish Antenna
Feature
DIAMETER OF POLE 2 INCHESFOOT IS 6X9 INCHES
24 INCHES TALL
GRAY COLOR
IT WORK WITH ANY DISH WITH 2 INCHES OPENING FOR FOOTMAST
Description
THIS SALE IS FOR A NEW FOOTMAST FOR DIRECTV 5 LNBF HD DISH OR DISH NEWTWORK METAL SUPERDISH ANTENNAS (NOT FOR THE FIBERGLASS)2. NEW FOOT MAST WALL & ROOF MOUNT FOR Directv 2" OD SLIMLINE HD DISH ANTENNA KAKU PLUST 1 SHORT MONO POLE , 1 LONG MONOPOLE 6 SCREWS
Feature
Universal 22-inch Tower Mount for Off-Air TV Antennas (2in Diameter Mount Pipe) - Includes 6 Bolts, Fit 1in to 2in Pipe/TowersWORK GREAT FOR ANY DIRECTV KAKU DISH WITH 2' DIAMETER PLUS 2 BRACKETS 7 6 BOLTS
DIRECTV SWM 5 DIRECTV SWM 3 KAKU 3 REGULAR KAKU 5 REGULAR
Quick & Economical Mount For Adding Compact Off-air Antennas To Satellite System 22in Pipe E-coated For Maximum Weather Protection
DIAMETER OF POLE 2 INCHES FOOT IS 6X9 INCHES 24 INCHES TALL GRAY COLOR IT WORK WITH ANY DISH WITH 2 INCHES OPENING FOR FOOTMAST
3. LOT OF 4 SLIMELINE FOOT MAST POLE 2 inches OD Ka/Ku MOUNT ROOF WALL DIRECTV
Feature
INCLUDED:4 FOOT MAST 2" OD
4 BUBBLE LABEL
4 BAGS HARDWARE
Description
THIS SALE IS FOR A LOT OF 4 SLIMELINE FOOT MAST POLE 2 inches OD Ka/Ku MOUNT ROOF WALL DIRECTV DIAMETER OF POLE 2 INCHES FOOT IS 6X9 INCHES 24 INCHES TALL GRAY COLOR IT WORK WITH ANY DISH WITH 2 INCHES OPENING FOR FOOT MAST4. NEW FOOT MAST WALL & ROOF MOUNT FOR Directv 2 OD SLIMELINE HD DISH ANTENNA, Model: W4-PBXS-2128, Electronic Store
Feature
DIAMETER OF POLE 2 INCHESFOOT IS 6X9 INCHES
24 INCHES TALL
GRAY COLOR
IT WORK WITH ANY DISH WITH 2 INCHES OPENING FOR FOOTMAST
Description
THIS SALE IS FOR A NEW FOOTMAST FOR DIRECTV 5 LNBF HD DISH OR DISH NEWTWORK METAL SUPERDISH ANTENNAS (NOT FOR THE FIBERGLASS)5. Winegard DS-3000 J Pipe Mount for Antennas, 39"
Feature
3ft heavy-duty Galvanized steel tripod mount for Off-air antennaTripods & masts over 10ft should be guy wired
Pitch pads are recommended but not included
Designed for outdoor Antennas
Mountable on side of house or roof
Highest quality build
E-coat finish stops weathering
Extra height improves antenna performance and clears obstacles
Extra wide base for stability
Made in USA
Description
The WINEGARD DS-3000 "J" Pipe mount is designed for outdoor antennas. It can be used on either end of pipe for best mounting. Pipe is made of galvanized steel, 39 inches long, with a wall thickness of .060 inches. 1.66" Of, E-Coated for maximum protection from the elements.6. HIDEit Uni-L Mount - Patented Large Adjustable Wall Mount for A/V Components - Made in The USA
Feature
CHECK YOUR DIMENSIONS. Adjustable to fit a wide variety of devices. Vertical Height: 13.5" to 17.5" - Vertical Length 10" (Overhang is fine) Vertical Depth 2.5" to 3.75"HIDE YOUR CABLE BOX BEHIND THE TV. REMOTE WILL STILL WORK. Enjoy your beautifully wall mounted TV without looking at a mess of wires and boxes! IR remote signals can reach your cable box from behind the TV. Test by holding your device behind the TV. Many new devices use RF technology not requiring line of sight.
MADE IN THE USA FROM STEEL FOR ULTIMATE STRENGTH. Made from cold-rolled 16-gauge steel for strength you can trust without unnecessary bulk. Our black powder-coat finish won't rust or chip. Allows convenient access to buttons, ports and cords.
EASY INSTALLATION. Easy to understand instructions. No complicated templates. Drill not required. Stud mounting is optional. Brackets easily connect and are held together by the provided hardware. Flat countersink screws, drywall anchors rated for 25 pounds, and black thumb nuts included.
WHY HIDEit? Made in the USA. We are the experts in device wall mounts and pioneered the industry in 2009. HIDEit Mounts are made from high quality materials in a state-of-the-art manufacturing facility. Should you ever have an issue, all employees are located in Reno, Nevada and are available via phone, email, chat and social media. Web search #afterHIDEit to see more customer setups.
Description
MEASURE YOUR DEVICEOur Uni-L fits the following dimensions:
Vertical Height: 13.5" to 17.5"
Vertical Length at least 9" (overhang is fine)
Vertical Depth: 2.5" to 3.75"
If these measurement don't work for your component we have other mounts for other components
COMPATIBLE WITH:
Please verify dimensions of boxes to ensure compatibility. AT&T U-verse boxes, Select Cisco Scientific Atlanta systems, Sky TV, Motorola STBs, Comcast Xfinity Set top boxes, Charter Spectrum boxes, Verizon Fios Boxes, Directv Receivers, Dish DVRs, Swann NVR boxes, and many more systems!
FEATURES
Adjustable to fit wide range of devices.
Easy access to power button, output jacks, and cables on either side of device.
Cold-rolled 16-gauge steel for superior strength.
Made in the USA from Recycled & Imported Steel.
Powder coat finish prevents rust and won't chip.
Quick and easy to install.
Includes drywall screws and anchors rated for 25lbs. Stud mounting is optional.
7. STEREN Satellite Tripod for Directv or Dish Network 2" Inch & 1 5/8" OD Satellite Mount Work on FTA as Well [221-120]
Feature
Universal Tripod Fits Directv And Dish NetworkIncludes Three Ground Spikes
Heavy Duty Galvanized Steel
Compact only 34 Inches tall
Portable Design with folding legs
Description
This Heavy Duty tripod is compatible with DirecTV and Dish Network. The mast is 2 inches on one end for DirecTV and on the other end measures 1 5/8 inches for Dish Network. The unit is made from galvanized steel and comes with 3 Metal foot spikes for additional stability and security. Measures 34 inches from the feet to the tip of the mast. This Tripod was designed for the larger HD satellite dishes. The tripods can be permanently bolted to building surfaces or even concrete with the proper anchor bolts which you provide. This is one of the best tripod for your Satellite system. Use this portable tripod for your RV, Camper, Appartment or Tailgating. Works on almost all your satellite dishes. The tripods collapse to a bundle that can be stowed in RVs or even carried in passenger vehicles if a portable antenna stand is needed in a mobile application. Sturdy steel construction Zinc / galvanized surfaces resist rust Mount on roofs, decks or any sturdy surface Swivel feet rotate to accommodate pitched surfaces Can be used as a portable tripod for RV use Comes with universal mast with 2" and 1 5/8" for DIRECTV and DISH8. Adjustable Outdoor HDTV Satellite Dish / Antenna J Pole Mount Tripod, 18 Inch
Feature
Adjustable direction - The mounting pole can be rotated 60 for best reception angle to get strongest signalsEasy installation - Comes with all the screws and plastic anchors, super easy to assemble.
Maximum diameter: 1", Maximum acceptance weight66LBS
Perfect for wall, attic or roof mount
5 Year Warranty
Description
Our Tripod is made of solid steel,heavy-duty and is user-friendly. You can mount your antenna with it on the wall, on the roof or on your balcony.9. HDTV Antenna Mount - 40in
Feature
40in tall x 1.6in diameter powder coated steel tube. 1.5 inches inside diameterIdeally suited for antennas
Base pivots for flat, angled, or vertical use
Includes mount, all-weather lag bolts, sealing tape, and instructions
90 day warranty on parts
Description
The 40in HDTV Antenna Mount is made from 1.6in powder coated steel tube and is universally suited for all types of antennas. The mount base pivots for flat, angled, or vertical use and includes sealing tape for worry-free installation. As a leader in cutting-edge antenna technology, Antennas Direct is dedicated to providing superior products supported by a robust warranty and a world class call center located in St. Louis, MO. Need help? Live chat with our team 7 days a week at antennasdirect.com or call toll-free 1-877-825-5572 for service and selection advice. Includes mount, all-weather lag bolts, sealing tape, and instructions.10. Antenna Mounting Pole, Antop Adjustable Attic/Outdoor TV Antenna Mounting Pole Universal Wall Mounts/Brackets -Easy Installation, Solid Structure, Weather Proof(1.3" Diameter,13" Arm Length)
Feature
HIGH QUALITY MATERIALSMade steel construction with a weather resistant seal, Durable, lightweight, Solid Structure, Weather Proof.ADJUSTABLE DIRECTIONThe mounting pole can be rotated 90 for best reception angle to get strongest signals. Base pivot for flat, angle, or vertical use.
BEST CHOICE With best size design, it can fit most TV antennas and satellite dishes.
EASY INSTALLATIONComes with all the screws and plastic anchors, super easy to assemble. Best accessory for you to mount your outdoor antenna.
100% BUYER GUARANTEE12-month warranty with friendly customer service. Please rest assured that you have made the right purchase, ANTOP Antenna Pole Mount is your perfect choice.
Description
DescriptionThe ANTOP J Pole AT-724 - Outdoor TV Antenna Mount, with weather-resistant material, will not rust out in a short time, ideally for outdoor use. The including mounting accessories enable you to assemble easily. Its adjustable angle, base pivot allows for flat, angled, or vertical use and supports roof, attic, or sidewall installations. Engineered and designed in the USA by ANTOP, the antenna specialists, the 13 in. mast, 1.3in diameter TV Antenna Mount is light weight but sturdy, perfectly suited for all types of outdoor antennas.
Customer Suppopt
ANTOP ON-LINE CUSTOMER SUPPORT TEAM is Available Mon-Fri 9am to 5pm (pst), Offering ANTENNA SELECTION & INSTALLATION ASSISTANCE, etc. ANTOP products come with 30-day money back guarantee and 12-month warranty with friendly customer service. Visit www.antopusa.com for complete Warranty, Return and Replacement details.
Technical Specification
Arm Length: 13 in.
Base Pivot: 6.1 x1.38 x2.5 in
Pole Diameter: 1.3 in
Weight: 1.25 lb
Color: Painted Black
What's in the box
J Pole
Base Pivot
Mounting Accessory (screws, hex nuts, screw anchors)
