When you looking for analog phone line splitter, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable analog phone line splitter is not an easy task. In this post, we show you how to find the right analog phone line splitter along with our top-rated reviews. Please check out our suggestions to find the best analog phone line splitter for you.
Best analog phone line splitter
1. Dualcomm RJ45/RJ11 Cable Sharing Kit - Connecting your Ethernet and Telephone lines by One Network Cable
Feature
Use a single network cable to provide connections of both Ethernet and analog telephoneEthernet standard: 10/100Base-T
Avoid cabling hassles and save costs
Network cable type: Cat5e and above
Reliable and easy to use
Description
[#Alert#: this unique product has been acclaimed by numerous satisfied buyers who have given so many positive reviews on Amazon. Yes, this is a very simple product, if you purchase this product and then find out that it does not work and want to return it, most likely you don't know how to use it. Therefore, it is highly recommended that you should understand the usage of this product before you buy] -- The RJ45/RJ11 Splitter Cable Sharing Kit includes two RJ45/RJ11 splitters which provides an extremely cost-effective solution for running an analog telephone line and a 10/100Base-T Ethernet line by using a single network cable such as CAT5e. -- The RJ45/RJ11 Splitter Cable Sharing Kit are tested to work normally for Ethernet signals at 100Mbps without any noticeable interference from the shared telephone signals. At the same time, the telephone signals are tested crystal clear without any noticeable interference or noise from the shared Ethernet signals.2. SHONCO in-line DSL Filter RJ11 6P4C Male to 2 Female Telephone Modem ADSL Splitter Filter-2 Pack
Feature
A DSL filter or microfilter is an analog low-pass filter installed between analog devices (such as telephones or analog modems) and a plain old telephone service (POTS) line.with their existing telephone (POTS) device,Also can be used for fax machines, answering machines.The DSL filter prevents interference between such devices and a digital subscriber line (DSL) service connected to the same line. Without DSL filters, signals or echoes from analog devices at the top of their frequency range can reduce performance and create connection problems with DSL service, while those from the DSL service at the bottom of its range can cause line noise and other problems for analog devices.
RJ11 6P4C Male to 2 Female Telephone Modem ADSL Splitter Filter. A DSL splitter is just a regular phone splitter with a filter on one of the outputs. This allow the internet to work on your PC through the telephone. line (connected to the modem of course)
Case Size : 4.5*3*2(cm) Cable Length :6(cm) Power supply voltage is AC220V. This device not accept full size Ethernet connector.
Installation :Typical installation for an existing home involves installing DSL filters on every telephone, fax machine, voice band modem, and other voiceband device in the home, leaving the DSL modem as the only unfiltered device. For wall mounted phones, the filter is in the form of a plate hung on the standard wall mount, on which the phone hangs in turn.
Description
In-line DSL filterA DSL splitter is a standard telephone filter that allows multiple devices to be connected to one RJ11 telephone jack, including both DSLAM and PSTN devices.
In cases where it is possible to run new cables, it can be advantageous to split the telephone line after it enters the home, installing a single DSL filter on one leg and running it to every jack in the home where an analog device will be in use, and dedicating the other (unfiltered) leg to the DSL modem. Some devices, such as monitored alarms and Telephone Devices for the Deaf, mainly certain older models using an acoustic coupler, may be hardwired and may not easily accept a DSL filter. Some of these devices can be successfully filtered with a DSL filter or splitter, especially if the hardwired connection is converted into a jacked connection.
Case Size : 4.5*3*2(cm)
Cable Length :6(cm)
Power supply voltage is AC220V.
Package list :
2x In line DSL filter
3. SHONCO 2 Pack 6ft Phone Telephone Cord RJ11 6P4C to RJ45 8P8C Connector Plug Cable for Landline Telephone,White
Feature
RJ11 6P4C to RJ45 8P8C Connector Plug telephone Cable.Cable Length: 1.7m/6ftThe telephone cables coming into house and inside wall panel are Ethernet, but the wall jacks are standard phone cables. To use DSL service,needed to convert the incoming signal from Ethernet down to a telephone jack.
Allow you use one end of cable(RJ11,6P4C) to connect the ADSL Splitter , so that can be installed between analog devices(such as telephones or analog modems) and a plain old telephone service (POTS) line.with their existing telephone (POTS) device,Also can be used for fax machines, answering machines.
Note:The RJ45 Cable cannot insert to RJ11 Wall mount.
Installation: For wall mounted phones, the cable is in the form of a plate hung on the standard wall mount, on which the phone hangs in turn.
Description
Q&A:1.My verizon DSL service comes through the phone line. My new wifi router has only ethernet input. Will this product work for me?
Answer:No, your DSL service needs a DSL modem between the incoming DSL phone line and your router. The modem will provide a phone port and an ethernet port. This product could then be used to plug into the phone port to use ethernet cable to carry the phone signal across your building where it can be converted back to provide a phone jack connection to plug in your phone.
2.Would this work to connect my new printer to my internet modem?
Answer:Definitely no. The cable is for connecting a DSL modem with an RJ-11 connector to a wall outlet using an RJ-45 connecting to a CAT5 cable to a whole-house DSL filter. If your printer has Ethernet capability, you need a a CAT5 jumper that can easily be found on Amazon or from other sellers. This jumper can connect from RJ-45 router Ethernet connectors on your modem to the printer.
4.Will this enable me to connect an Ethernet cable from network extender to a cable modem with only one WAN port and one called "USB", but looks like ph
Answer:NO. it will not work with USB.
6.Has anyone tried this with ooma office? i'm trying to connect a phone that has female cat5e ports to an ooma linx phone jack.
Answer:The Ooma Linx is a device that connects a plain old telephone system (POTS) type phone to the Ooma Telo which is a voice-over-IP (VOIP) device that can be used with its own wireless handset. If your phone is an old multil-ine POTS type phone that used an 8 contact RJ-45 female connector, it is possible the cable will work with line 1 on the multi-line phone. It may also be possible you are trying to connect a VOIP phone to the Ooma Linx -- which will not work.
4. ECS-RJ11 2 Line Phone Line 1 Line 2 Telephone Splitter
Feature
Also Known As : RJ11 Line 1, Line 2 Splitter or KX-J24.The ECS-RJ112LS is an all-purpose 2-line phone splitter specifically engineered for users that prefer the reliability of analog phone systems.
This is the only complete all-in-one hard molded dirt proof line-1/line-2 phone splitter on the market.
Description
The ECS-RJ112LS is an all-purpose 2-line phone splitter specifically engineered for users that prefer the reliability of analog phone systems. This is the only complete all-in-one hard molded dirt proof line-1/line-2 phone splitter on the market. The ECS-RJ112LS was created for three different purposes: Option 1: Customer has a 2 line analog phone with separate line-1 and line-2 RJ11 phone jacks on their phone. The ECS-RJ112LS line-1 cord plugs into line-1 on analog phone and our ECS-RJ112LS line-2 cord plugs into line-2 on analog phone. The short end of our adapter then plugs into an RJ11 line-1/line-2 wall jack. Option 2: Customer has a 2 line analog phone with single line-1/line-2 RJ11 phone jack on their phone. The short end of our ECS-RJ112LS adapter plugs into the RJ11 line-1/line-2 on back of customer phone. The ECS-RJ112LS line-1 cord plugs into line-1 RJ11 wall jack and our ECS-RJ112LS line-2 cord plugs into line-2 RJ11 wall jack. Option 3: Customer is using a 4 port analog voice card installed in a computer at a business. This is typically a digital dictation or voice mail system. The short end of our ECS-RJ112LS adapter plugs into the RJ11 line-1/line-2 jack on 4 port voice card. The ECS-RJ112LS line-1 cord plugs into line-1 RJ11 wall jack and our ECS-RJ112LS line-2 cord plugs into line-2 RJ11 wall jack. Repeat process with a second adapter for RJ11 line-3/line-4 jack on 4 port voice card. Line-1/line-2 cords are a generous 10 feet long and includes a dust proof splitter for superior performance, without sacrificing sound quality.5. Newtech Telephone Training Adapter Y Splitter for Corded Handset
Feature
Allows the use of two handsets on one telephone.Ideal for telephone marketing training purposes.
The plug on the cable is 4P4C, some call it RJ9 or RJ22.
Also Known as a Handset Splitter
The training connection is not muted. Both the trainer and the trainee can be heard on the call.
Description
Allows the use of two handsets on one telephone. Ideal for telephone marketing training purposes. Black Yes this is designed to plug into the telephone and have two handsets plugged in. This will work even on digital sets as the signal going to the handset is analog. The plug on the cable is 4P4C, some call it RJ9 or RJ22.6. 2 Pack. Telephone RJ11 6P4C to RJ45 8P8C Connector Plug Cable for Landline Telephone
Feature
J11 6P4C to RJ45 8P8C Connector Plug telephone Cable.Cable Length:0.5mThe telephone cables coming into house and inside wall panel are Ethernet, but the wall jacks are standard phone cables. To use DSL service,needed to convert the incoming signal from Ethernet down to a telephone jack.
Allow you use one end of cable(RJ11,6P4C) to connect the ADSL Splitter , so that can be installed between analog devices(such as telephones or analog modems) and a plain old telephone service (POTS) line.with their existing telephone (POTS)
device,Also can be used for fax machines, answering machines.
Note:The RJ45 Cable cannot insert to RJ11 Wall mount. Installation: For wall mounted phones, the cable is in the form of a plate hung on the standard wall mount, on which the phone hangs in turn.
Description
The telephone cables coming into house and inside wall panel are Ethernet, but the wall jacks are standard phone cables. To use DSL service,needed to convert the incoming signal from Ethernet down to a telephone jack.
Allow you use one end of cable(RJ11,6P4C) to connect the ADSL Splitter , so that can be installed between analog devices(such as telephones or analog modems) and a plain old telephone service (POTS) line.with their existing telephone (POTS) device,Also can be used for fax machines, answering machines.
Note:The RJ45 Cable cannot insert to RJ11 Wall mount.
Installation: For wall mounted phones, the cable is in the form of a plate hung on the standard wall mount, on which the phone hangs in turn
7. Digitone ProSeries Call Blocker - Call Block All Unwanted Robocalls, Backlit Display, Block Names or Numbers, 1,000 Numbers Virtual Memory, Last Call Remote Entry
Feature
WINNER of CONSUMER REPORTS ROBOCALL BLOCKER Review. FREE USA Domestic Shipping! Call us at 877-610-5693 to discuss your plans to use our product or visit digitone.com.An Amazon Best Seller! BackLit 3-Line Display that shows NAME and NUMBER, Time, Date, Total and New Calls. Please read through the manual before usage of the product or for troubleshooting steps.
Your Phones Won't Ring on Blocked Calls. Caller ID is Repeated to your connected Phones. Virtual Unlimited Block Memory. No need for a Line splitter or worry of static on the Line.
Works on all Analog phone lines with DSL, FIOS, Cable Modems or Digital Phone Company Services. Block Entire Area Codes, Exchanges or Specific NAMES or NUMBERS. Block "V" or "+" type name calls or "SPAM?" identified calls from Verizon.
Stop Calls Instantly with One Button Blocking as they Ring In. Requires Caller ID Name and Number Service. Use Last Call Remote Entry on your Phone to Block Calls Remotely.
Description
The new ProSeries Blocker was designed by Digitone Communications for those who want a way to block unwanted calls, yet allow all others to ring their phones. It comes from the factory preset to allow all callers with a valid phone number to ring through and then screens your calls based on a Blocked Caller List you prepare. You don't have to prepare a white list unless you intend to block all callers and just let friends and family ring through. The ProSeries Blocker is the perfect complement to Nomorobo service to prevent the first ring on blocked calls. Caller ID is repeated to your connected phones in the TEL phone port on all invited calls. More information can be seen at digitone.com or call 1-877-610-5693. Make sure you have a secure delivery location before ordering. Contact Digitone at 1-877-610-5693 before purchase of the Digitone ProSeries Blocker to discuss your plans to connect it to your phones or visit Digitone's website. Please read through the manual before usage of the product or for troubleshooting steps. Thank you.8. Plantronics TR-11 Electronic Hook Switch Adapter (88608-11)
Feature
Intended for Analog PhoneProduct Type Electronic hook switch AdapterMadeAllows the user to answer and end a call remotely from the wireless headset without having to be at the desk to lift the handset receiver off the hook, or to press any buttons on a cordless phone handset.
Connect any of the Plantronics wireless CS500-series headset (such as CS540, CS530, CS510, CS520) as well as the Savi W700-series (such as W740, W710, W720, W730) and Voyager Legend CS to a home cordless phone, an analog corded landline phone.
Also works with Avaya or Lucent Partner phone.Note: Phone-line (RJ45) Wall splitter not included in the TR-11 package.
Note: Older wireless headsets (such as CS55, CS70, CS70N, CS50, CS351N, CS361N and Voyager 510S) will NOT work with this TR-11 adapter (formerly TR-1). The interface on those charging bases is different than the one on the newer models listed above.
Description
Plantronics tr-11 - electronic hook switch Adapter - Plantronics' mission is to enhance personal communication. Plantronics helps make people more productive, safe, and comfortable improving the clarity of Communications. Plantronics is committed to ensuring that its products meet customer requirements and are committed to quality and customer satisfaction.9. OpenVox RJ45 to 4 x RJ11 Splitter for A1200P / A2410P / A1610P series
Feature
OpenVox RJ45 jack to RJ11RJ45 to RJ11
Description
Designed for analog card. It's to split RJ45 jack to RJ11 jack that is used to connect the telephone line.10. DCE/DSL-SPLITTER
Feature
Economical in-line DSL SplitterThe DCE DSL Filter Splitter effectively filters one or more phone devices (standard or cordless phone, answering machine, dial-up modem, fax machine, etc.).
The DSL Filter Splitter is Easy to install, just plug the splitter / filter cord into any standard wall mount phone jack, and plug the DSL/HPN cord and phone cord into the splitter / filter.
The DCE DSL Filter Splitter provides one unfiltered jack for DSL/HPN plus one filtered jack for any single-line phone device.
