If you looking for receiver battery pack with charger then you are right place. We are searching for the best receiver battery pack with charger on the market and analyze these products to provide you the best choice.
Best receiver battery pack with charger
1. COLCASE Fireproof Explosionproof Lipo Safe Bag for Lipo Battery Storage and Charging , Large Space Highly Sturdy Double Zipper Lipo Battery Guard (198x150x135mm)
Feature
FIREPROOF EXPLOSIONPROOF SAFE BAG : Inner surface is made of supreme fire retardant fiberglass nylon. 100% Fire Proof Guarantee ! Stands up against fire and heat up to 1000 (550 ).NO FIBERGLASS ANNOY: Outer surface was painted with Fire retardant coating, no glass fiber will annoy anymore
DOUBLE ZIPPER : Double zipper make the lipo safe bag well sealed and convenient to use.
SAFEGUARD LIPO BATTERY : This flame retardant bag is a convenient way of safeguarding your Lipo batteries during charging, transit, and storage
LARGE SPACE : Enough space to place multiple batteries at once (about 15-20 pcs 2200mah 3S Lipo batteries) 198x150x135mm.
Description
Lipo Batteries Safe BagA must Have for Safety! The lipo bag is made of a fire-retarding material.
Simply put lipo battery inside the bag and if it starts on fire the lipo bag
is designed to mitigate the effects of a Lithium-Polymer battery charging mishap.
Charge the batteries in the Safe charging bag for peace of mind and a higher level of
safety. helps to contain flames in the event of a fire It is large enough to place
multiple batteries at once
This bag is made of premium quality: Solid built Lipo battery bag with high quality Velcro
in the front, give more protection on the sides, holds your lipo battery safely
Warning:
Never leave charging battery unattended.
Always ensure the battery is on a non-flammable surface.
Ensure the lipo safe bag is sealed while charging.
The Lipo safe bag is intended to reduce the chances of damaged in the event of a lipo fire.
Specification :
Use: for safer charging and storage of lipo batteries
Dimensions (LxWxH): 19.8*15*13.5 cm
Weight: 150g
Material: Textile Fiberglass Material with Fire retardant coating
Package Contents:
1 x Lipo Battery Safe Bag
2. Powerhobby 5 Cell 6V 1600mAh NiMH Hump Receiver Battery Pack with Charger
Feature
Includes : Hump Pack + ChargerShape: Side by Side Trapezoid
Dimension: 50 x 30 x 30mm
High quality 6.0 V, 1600 mAh battery pack made of 5 x 2/3 A size NiMH cells.
Recharging up to 1000 times.
Description
Powerhobby 6V 1600mAh NiMH Hump Battery Pack with Hitec Connector + ChargerFeatures :
6V 1600 mAh NiMH Receiver Battery Pack
High quality 6.0 V, 1600 mAh battery pack made of 5 x 2/3 A size NiMH cells.
Rapidly charges up and long cycle life.
Recharging up to 1000 times.
Shape: Side by Side Trapezoid
Connector: Hitec connector
Weight: 117g
Dimension: 50 x 30 x 30mm
Includes : Hump Pack + Charger
Warranty:
This Battery Pack is guaranteed, under warranty, against defects in materials and workmanship upto 6 Months from the day of purchase
This warranty does not cover physical damage to the battery pack as the result of a crash, hard landing, improper mounting or any deformity caused by the user.
This warranty does not cover internal damage to the battery pack due to overcharging, deep discharging, or excessive
discharge current.
3. PowerHobby Overnight Receiver RX Nimh Hump/Flat Pack Battery Wall Charger
Feature
Wall charger design w/Futaba J connector110/120v AC 60 Hz Input Voltage
6v 120mAh Output Voltage
12" charge lead
Includes : 1 Charger
Description
PowerHobby Receiver RX Nimh Hump / Flat Pack Battery Wall ChargerPowerHobby Nickel Metal Hydride Overnight Receiver Battery Charger, intended for use with Ni-Mh Receiver Batteries that have a Futaba J connector.
Features:
Wall charger design w/Futaba J connector
110/120v AC 60 Hz Input Voltage
6v 120mAh Output Voltage
12" charge lead
4. Nimh, Nicd Battery Pack smart fast Charger 3~9 cells (3.6V, 4.8V, 6V, 7.2V, 8.4V, 9.6v,10.8V) for airsoft packs, Toy RC (Radio-controlled) Model Cars, Hobby, Boats, Aircraft Batteries, Leads in pack
Feature
If not support your connector, please try to buy one, B06XXJ184Q , noted direction,this item is USA AC plug type, NOT SUPPORT LITIUM BATTERIES, ONLY Nickel-cadmium, NiMH batteries pack charger for radio-controlled model cars, boats and aircraft.Support 3-9 series battery pack, In pack leads, FUTABA, JST, T PLUG, 5.5 X 2.5 TX supported
Protected against overload and short-circuit. This item is not suitable for lithium battery!!!
A charge indicator LED is provided for the charge output, Male tamiya plug, other popular 4 types leads in pack, We welcome customer suggest new lead type to us.
A large current charge. After detect a Delta-Peak. Current will down to 100mA to maintain the battery
Description
new lead published, please refer ASIN: B06XXJ184Qszwisechip is professional charger designer over 10 years, our solution for 1, 2, 4, 7 channel charger wildely used by a lot of UK and German company. We also can make large power charger. 200W, 1000 W for example
We have a serious reminder that this charger is not suitable for lithiumLipo battery and lead-acid (Pb) battery charging
Feature:
1. Nickel-cadmium, NiMH batteries pack charger for radio-controlled model cars, boats and aircraft.
2. Support 3-8 series battery pack.
3. Working voltage: 110-240V AC @ 50-60Hz Hz
4. Protected against overload and short-circuit.
5. A charge indicator LED is provided for the charge output.
6. 1 A large current charge. After detect a Delta-Peak. Current will down to 100mA to maintain the battery.
The charging progress
1. Locate the mains plug attached the Charger and connect it to a mains socket (110~240 V AC @ 50-60 Hz).The red LED should not flash; this indicates that the charger is ready for use.
2. It is essential to check that the polarity of the battery connector and the charge lead connector is correct (see Figs).
3. Connect the discharged NiMH battery pack to the charge lead attached to the charger.
4. The corresponding red LED will now light up to indicate that charging is in progress at that output.
5. When LED lights up green, the battery connected to the output is fully charged.The pack is now fed a small trickle charge current.Disconnected the charged battery from the charge output.
6. If the battery is still cool and the calculated charging time is not reached, the battery may have a "false" peak. In this can start charging the battery again."False" peak happen mainly with old or bad NiMH -batteries.
7. Disconnect the Twin charger from the mains socket.
5. Spektrum 150mA Dual Output Charger
Feature
Charge leads for transmitter and receiverInput: AC 100 - 240V
Output: Rx & Tx: 150mA
Description
! Attention Canadian Customers !
This product has a Canadian Only Recall. Click Here to learn more.
Key Features
- Charge leads for transmitter and receiver
- Input: AC 100 - 240V
- Output: Rx & Tx: 150mA
Overview
This charger provides two charging ports. One port for your transmitter and one port for your receiver. Input is AC 100 - 240V. Output is 150mAh to both the transmitter and Receiver.
*For use with JR and Spektrum transmitters only
6. Futaba FBC19B4 Dual Charger
Feature
FEATURES: 120V AC overnight battery charger Charges NiCd transmitter and receiver packs simultaneously or separately Two Red lights indicate chargeINCLUDES: One Charger with Leads for Futaba J Connector Receiver Battery and Transmitter Charge Plug
This is the Futaba Transmitter and Receiver Battery Wall Charger; This charger is included with many Futaba radio systems
Description
This is the Futaba Transmitter and Receiver Battery Wall Charger. This charger is included with many Futaba radio systems.7. Charger Cable Adapter: Deans T-Plug Female to Futaba, Receiver, Rx, Servo Male (Wires Cables Leads Plugs LiPo Battery)
Feature
Use this adapter to charge your batteries on your charger. Most chargers come with a Deans T-Plug charge cable. But they do not come with a Futaba/Receiver/Rx/Servo charge cable. This nifty little adapter fixes that problem and adds a little bit of extra length if needed.High Quality Wires and Plugs
Approx. 9" Total Length
Note: This is a charging adapter, not to be used in a vehicle.
8. Geilienergy 4.8v 2000mAh NiMH Receiver RX Battery with Hitec connector for RC Cars and Airplanes
Feature
Rechargeable Receiver Battery Pack for Futaba , Hitec , JR or compatible style Radio Systems.Made of high quality matched NiMH 4 x AA cells with hitec connector.
Dimensions: 58 x 15 x 52 mm
Universal radio connector with 22 AWG wires
Description
Product Specification:*4.8V 2000 mAh NiMH Battery Pack
* Rechargeable Receiver Battery Pack for Futaba , Hitec , JR or compatible style Radio Systems.
* Made of high quality matched NiMH 4 x AA cells with hitec connector.
* Universal radio connector with 22 AWG wires
* Dimensions: 58 x 15 x 52 mm
* Weight: 0.24LB
Package Include:
1 Pack 4.8v 2000mAh NiMH Battery
9. Powerhobby 5 Cell 6V 1600mAh NiMH Flat Receiver Battery Pack with Charger
Feature
Includes : Battery + ChargerDimension: 84 x 17 x 30mm
Shape: Side by Side
Recharging up to 1000 times.
High quality 6.0 V, 1600 mAh battery pack made of 5 x 2/3 A size NiMH cells.
Description
Powerhobby 6V 1600mAh NiMH Flat Receiver Battery Pack with ChargerFeatures :
6V 1600 mAh NiMH Receiver Battery Pack
High quality 6.0 V, 1600 mAh battery pack made of 5 x 2/3 A size NiMH cells.
Rapidly charges up and long cycle life.
Recharging up to 1000 times.
Shape: Side by Side
Dimension: 84 x 17 x 30mm
Includes : Battery + Charger
Warranty:
This Battery Pack is guaranteed, under warranty, against defects in materials and workmanship upto 6 Months from the day of purchase
This warranty does not cover physical damage to the battery pack as the result of a crash, hard landing, improper mounting or any deformity caused by the user.
This warranty does not cover internal damage to the battery pack due to overcharging, deep discharging, or excessive
discharge current.
10. Tenergy 4.8V 2000mAh NiMH Receiver RX Battery with Hitec connectors for RC Cars and Airplanes
Feature
Rechargeable Receiver Battery Pack for Futaba , Hitec , JR or compatible style Radio Systems.Made of high quality matched NiMH 4 x AA cells with hitec connector.
Dimensions: 58 x 15 x 52 mm
Universal radio connector with 22 AWG wires