Finding the best stud and wire finder suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best stud and wire finder
1. Zircon MultiScanner i520-FFP Center Finding Stud Finder with Metal and Live AC Wire Detection
Feature
Zircon's MS i520 is a multi-surface scanner with 4 modes that detect studs, metal and live AC wiring to help you easily find studs and avoid hazardsBoth StudScan and DeepScan modes locate the edges, center and direction of wood or metal studs; Metal Scan mode finds both non-ferrous metal (such as copper pipe) and ferrous metal (such as rebar); AC Scan finds and traces live, unshielded electrical AC wires
WireWarning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan, DeepScan, and Metal Scan modes
ACT (Auto Correcting Technology) automatically corrects common user errors, such as when scanning begins over a stud, while the Patented SpotLite Pointing System clearly indicates the target location
One fully charged 9V battery, not included, is required for the multi-surface scanner to run at optimal performance
Description
The Zircon MultiScanner i520 center finding electronic wall scanner quickly and easily locates studs, detects metal, locates live, unshielded AC wires. Complete with the latest technology in density detecting software and circuitry, as well as an ergonomic body design. Unlike other wall scanners and stud finders, the Zircon i520 stud finder has a 4-mode switch makes it easy to change functions while the ultra-bright LCD screen, SpotLite Pointing System, and audio tone all indicate the location of the target. This Zircon stud finder also comes equipped with a Signal Strength Indicator helps to distinguish between shallow and deep targets. A weak signal can also imply other non-stud objects, like wires and pipes, are present in the area being scanned. The MultiScanner i520 includes ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to a low battery indicator to alert its users to replace its battery for optimal performance results. The tool constantly scans its surroundings and recalibrates itself if necessary. In StudScan mode, the Zircon i520 locates the center, edges, and direction of wood or metal studs up to 3/4 (19 mm) of an inch deep. Switch the i520 stud finder over to DeepScan mode and double the scanning depth to 1.5 inches (38 mm) deep and enables scanning for joists in some ceilings and floors. Metal Scan mode of the MS i520 provides the ability to locate non-ferrous metal, such as copper pipes, up to 1.5 inches (38 mm) deep and ferrous metal, such as rebar, up to 3 inches (75 mm) deep. Using Metal Scan mode, this Zircon studsensor can find studs behind lath and plaster walls, tile, drywall and stucco walls by identifying the consistent pattern of screw or nail heads in the studs. Additionally, the MultiScanner i520 is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using the stud and metal scan modes. To detect, locate, map, and trace the live wires, simply switch over to the AC Scan function which acts as a live wire detector and finds and traces live, unshielded AC wiring up to 2 inches (50 mm) deep. The Zircon MultiScanner i520 is a perfect choice for serious users, such as home improvement hobbyists and professional contractors. With the Zircon MS i520, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.2. Stud Finder Wall Scanner - 4 in 1 Electric Wood Detector, Sensor Wall Scanner with LCD Display, Beam Finder Center Finding & Sound Warning for Wood AC Wire Metal Studs Detection (Black)
Feature
FOUR SCANNING MODES - The stud finder provides four scanning modes in total for detection. Depending on the tasks you have, you can switch to the desired mode. The STUD SCAN is used for finding and locating the center and edges of wood or metal studs up to 3/4 in (19mm) deep; DEEP MODE for scanning walls for 1 1/(2 ) in (38mm) deep; METAL SCAN for locating and detecting metal (such as 1/2 inch rebar) up to 2 1/(4 )in (60mm) deep; and AC SCAN for locating live AC wires up to 2 in (51mm) deepGRAPHICAL LCD DISPLAY - The multi Function wall scanner detector has a GRAPHICAL LCD DISPLAY, which indicates many cues in detection, such as detection mode, signal strength, automatic calibration, battery indication with maximum readability. And the Low Battery Indicator icon displays when the battery level is getting low, reminding you to replace a brand new 9-volt battery in time
SOUND WARNING - The multi function stud finder offers the BEEP SIGNAL ALERT. When you have detected an object with the wall scanner, it will beep continually. The big sound warning together with the LCD screen helps detect the accurate location of the objects. Then a peck shape will display on the graphical screen. You can use the pencil to point the location of the object. The audible and visible cues reliably keep users informed when any object, such as metal, studs, AC live wiring gets found
AUTOMATIC CALIBRATION - The wall dectector stud finder would AUTOMATICALLY CALIBRATE ITSELF when it is turned on. The calibration is done by positioning the device on the wall where there is no wood studs, AC wires or metal. The stud finder will indicate whether it has been already calibrated or not. The automatic calibration is accurate and precise, providing users with maximum reliability, greatly reducing errors in application and makes sure that most objects behind the wall can be detected
SIMPLE AND FAST - The stud finder wall scanner can QUICKLY LOCATE the edges and center of metal studs, pipes, rebar, joists behind walls, floors and ceilings as well as the live AC wires. Fast detection saves users time and efforts, making the task completion EASIER. One button on the middle of body is used for selecting from four scanning modes. The other button is on the left side of device, which helps you easily read the information on LCD screen and quickly detect the objects behind walls
Description
The multi-scanner stud finder is an extremely ideal tool for construction, electricians, masons, carpenters, homeowners, and others who need reliable detection.The stud finder wall scanner has four scanning modes in total : Stud Scan, Deep Mode, Metal Scan and AC Scan, which offers you wide choices to select your desired mode when it comes to various tasks. Due to the multi-mode detection and portability, the users can apply the stud finder wall detector to wide use. You can work on different wall surfaces, such as lath, wallpaper, wood flooring, acoustic ceiling, painted walls and more.
The greatest advantage of VIVREAL multi-scanner stud finder lies in its fast and simple detection. After selecting your desired mode, simply press the button on the left side of stud finder wall detector, you can quickly and accurately identify the wood and metal studs, copper and steel pipe, rebar, or wiring hidden behind the walls. It really saves you quantities of time and makes your detection experience more interesting and productive.
In addition, VIVREAL wall scanner detector also gives you many audible and visible cues when any objects detected, which helps you to find the exact location of variety of materials. The bright graphical LED display shows the Read-Outs of detection mode, signal strength, automatic calibration, battery indication with maximum readability. These smart features all make the stud finder wall scanner compact and durable.
USER TIPS:
1. Hold the stud finder properly and move it slowly in one direction to obtain the optimum scanning results.
2. Avoid placing your other hand, or any other part of your body on the surface being scanned, which will interfere with the performance of the scanner
3. Make sure that the surfaces you scan are flat and have been fully dried out.
4. Take care when working near the electrical wires and always turn off the power supply.
3. Zircon StudSensor e50 Electronic Wall Scanner / Edge Finding Stud Finder / Live AC WireWarning Detection - FFP
Feature
The Zircon SS e50 electronic stud scanner detects the edges of wood and metal studs and alerts you of live AC wires helping you easily find studs and avoid hazards while mounting a TV, hanging cabinets, installing garage shelving and moreStudScan mode locates the edges of wood or metal studs up to 0.75 inches (19 mm) deep while DeepScan mode locates targets up to 1.5 inches (38 mm) deep
WireWarning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan and DeepScan modes
Patented "Over the Stud" Indicator and SpotLite Pointing System ensure the e50 provides trustworthy results while the ergonomic grip design allows for comfortable use regardless of hand size
One fully charged 9V battery, not included, is required for the stud scanner to run at optimal performance
Description
The Zircon StudSensor e50 is an electronic edge finding stud finder. The e50's body design reduces normal scanning errors and can be comfortably held in either hand at any angle while the rubber over molded grip also provides a secure hold. The SS e50 easily locates the edges of wood and metal studs and joists behind walls, floors, and in ceilings with just one pass. In StudScan mode, the SSe50 locates the edges of shallower wood or metal studs up to 3/4 of an inch (19 mm) deep. Switch over to DeepScan mode to double the scanning depth to 1.5 inches (38 mm). This stud sensor is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using both stud scan modes. Finding studs using this edge finding tool is simple. To get started, install one brand new 9V alkaline battery (not included). Place the unit flat against the wall and press the Power Button to calibrate the sensor. Once you hear a beep indicating calibration is complete, continue to hold the Power Button and slowly slide the tool across the surface. The easy-to-read LCD will alert you as the stud detector approaches the edge of the stud in both scanning modes. Once the edge is detected, an arrow-shaped SpotLite Pointer will illuminate and an audio tone will sound. DO NOT DRILL HERE! Instead, mark the spot and continue past the stud. Repeat the process in the opposite direction and mark the opposite edge of the stud. The center of the stud is midway between the two marks. Make sure to note whether the WireWarning Detection is alerting to live, unshielded AC wiring before drilling between the two marks into the center of the stud. With the Zircon StudSensor e50, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.4. Stud Finder Wall Scanner - 4 in 1 Electronic Stud Sensor Wall Detector Wood Beam Finders Center Finding with Battery and LCD Display for Wood AC Wire Metal Studs Detection (Black)
Feature
ADVANCED SENSORS TECHNOLOGY FOR ACCURATELY AND QUICKLY LOCATES STUDS WOOD METAL AC WIRES!- A good stud finder detector needs to be Accurate. Tavool wall scanner is an electronic stud finder with multi-sense technology which can locate studs/wood/AC wires in multiple locations on your wall. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this digital stud scanner4 IN 1 MULTIFUNCTION PLUS DEEP DETECTION - The digital wall scanner includes four different scanning modes for woods, metals, AC wires and deeply embedded objects. Stud mode detects wooden beams and joists in drywall up to 1.2 inches. Metal mode detects pipe , rebar, aluminum and copper up to 1.57 inches.Deep mode detects wood and metal parts located up to 1.77 inches while 85~240 volt AC current for voltage and live electrical lines up to 2.36 inches
EASY TO READ LCD SCREEN Displaying the Desired Stud Material As Well As the Precise Position of the Stud - The Tavool digital stud scanner features large LCD display together with the big sound warning to detect the accurate location of the objects. When find the material, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users time and efforts, making the task completion EASIER
AUTOMATIC CALIBRATION AND SIMPLE USE - Turning on the stud finder and Completing calibration by placing the stud finder on the wall when the BEEP sound and screen shows disappear. The automatic calibration before using provides users with maximum reliability and accuracy. Then put it on the wall. The finder will flash and beep once it has picked up the edge of a stud
ERGONOMIC GRIP FOR COMFORTABLE USE - The ergonomic design of this wall stud finder makes it comfortable to hold from any angle. This stud finder wall detector can quickly LOCATE the metal wood AC wire that are hidden in the walls, floors and ceilings of your house, help you avoid hazards while installing TVs, cabinets, garage shelves etc
Description
Whether you're hanging a picture,mounting a TV,renovating part of your home, or working as a professional contractor, you need to know what is on the other side . Tavool stud finder is one of those tools that you will eventually need. Tavool stud finder can be the difference between a successful DIY home project and disaster.
Tavool stud finder is a device that is used to determine exact location of framing studs that are located behind the drywall. This Multi-scanner stud finder uses electronic signals to quickly locate edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings.
The stud finder wall detector features large LCD display, ergonomic design and multi-sense technology for accurate detection of both metal and wooden studs. It will also detect live wiring up to two inches into walls. The four scanning modes (stud scan, deep scan, metal scan and AC scan) make it ideal for both tradesmen and home carpenters. With this device, you can immediately find a suitable place on the wall without making any extra holes
The cost of a stud finder wall scanner will almost always be less than the cost of repairing the damage done from not locating one before hanging something.
Nabini stud finder has changed the brand to "Tavool".ADD TO CART AND START YOUR PROJECT SAFE!
How to use an electronic stud finder detector?
Step 1: Power on the device and choose the scanning mode.
Step 2: Place the device flat on the wall. Then press and hold the button while keeping the unit still until calibration is complete (1-2 seconds). When calibration is complete, the unit will sound a short beep and the display bars will be cleared.
Step 3: While holding on the button, move it along the desired surface to scan.
Step 4 : When the stud finder detects an object, it will beep continually and will display on the LCD screen (if available).
5. Stud Finder Sensor Wall Scanner - 4 in 1 Electronic Stud Sensor Beam Finders Wall Detector Center Finding with LCD Display for Wood AC Wire Metal Studs Joist Detection
Feature
The Most Accurate & Improved Safety - Tavool specializes in stud finder for years and adopts the most Advance Sensors Technology for accurately & quickly locating studs wood metal AC wires!For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scannerUpgrade Design of LCD Screen - Displaying the Desired Stud Material As Well As the Precise Position of the Stud - The Tavool digital stud scanner features large LCD display together with the big sound warning to detect the accurate location of the objects. When find the material, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users time and efforts, making the task completion EASIER
4 IN 1 Multiplication Plus Deep Detection - This digital wall scanner includes four different scanning modes for woods, beam, joist, metals, AC wires and deeply embedded objects behind floor, ceiling, wall. Stud mode detects wooden beams and joists in drywall up to 1.2 inches. Metal mode detects pipe , rebar, aluminum and copper up to 1.57 inches.Deep mode detects wood and metal parts located up to 1.77 inches while 85~240 volt AC current for voltage and live electrical lines up to 2.36 inches
Automatic Calibration and Ergonomic Grip for Comfortable Use - Turning on the stud finder and Completing Calibration until the BEEP sound and screen shows disappear. The automatic calibration before using provides users with maximum reliability and accuracy. Then put it on the wall. The wood beam finder will flash and beep once it has picked up the edge of a stud.The ergonomic design of this wall stud finder makes it comfortable to hold from any angle
Wide Use and 100% Warranty - This stud joist finder wall detector can quickly LOCATE the metal wood AC wire that are hidden in the walls, floors and ceilings of your house, help you avoid hazards while installing TVs, cabinets, garage shelves etc. This stud finder is covered by one years hassle-free warranty. Any problems under normal use in one year, please contact us and we will send new stud finder to you
Description
Whether you're hanging a picture,mounting a TV,renovating part of your home, or working as a professional contractor, you need to know what is on the other side .Tavool stud finder is one of those tools that you will eventually need. Tavool stud finder can be the difference between a successful DIY home project and disaster.
Tavool stud beam finder is a device that is used to determine exact location of framing studs that are located behind the drywall. This Multi-scanner stud finder uses electronic signals to quickly locate edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings.
The wall detector features large LCD display, ergonomic design and multi-sense technology for accurate detection of both metal and wooden studs. It will also detect live wiring up to two inches into walls. The four scanning modes (stud scan, deep scan, metal scan and AC scan) make it ideal for both tradesmen and home carpenters. With this device, you can immediately find a suitable place on the wall without making any extra holes
The cost of a stud finder wall scanner will almost always be less than the cost of repairing the damage done from not locating one before hanging something.
Nabini stud finder has changed the brand to "Tavool".ADD TO CART AND START YOUR PROJECT SAFE!
How to use an electronic stud finder detector?
Step 1: Install the 9v battery (not included in the package) & choose the mode.
Step 2: Place the device flat on the wall. Then press and hold the button while keeping the unit still until calibration is complete (1-2 seconds). When calibration is complete, the unit will sound a short beep and the display bars will be cleared.
Step 3: While holding on the button, move it along the desired surface to scan.
Step 4 : When the stud finder detects an object, it will beep continually and will display on the LCD screen.
6. Bosch Digital Multi-Scanner GMS120
Feature
DETECTION: The Bosch GMS120 Digital Wall Scanner features multi-mode laser detection for wood studs, metal objects (rebar, studs and steel/copper pipes) and live wiring.PERFORMANCE: Features the latest three sensor laser technology, offering a wide range of detection performance of up to 4-3/4-Inch deep in cured concrete, up to 2 inches for live wiring, up to 3-1/8 inches for copper and up to 1-1/2 inches for wood studs. The accuracy of the product is 0.0625
SELF-CALIBRATING: Includes three selection modes for wood, metal, and AC wiring. The GMS120 offers automatic calibration from the start and continues to self-calibrate through the course of the project for easy and precise detection
DISPLAY: Features an illuminated graphical LCD display to indicate mode, detection strength, and more. The large detection ring flashes green for no object found, orange for object near and red for object found within the sensor range.
CENTER FINDER: This wall scanner includes a center finder that pinpoints the object center with an audible detection signal with an on/off button.
Description
Know what's behind the wall before you take on that job with a wall scanner! The Bosch GMS 120 Electronic Multi Scanner finds magnetic and nonmagnetic metals, power cables, wooden substructures and even plastic pipes! An audible alert and illuminated graphical display gives you the information you need to proceed with confidence.7. Zircon MultiScanner 740 Electronic Wall Scanner with Built-In Erasable Wall Marker/Center Finding and Edge Finding Stud Finder/Metal Detector/Live AC Wire Detection - FFP
Feature
Zircon's MS 740 is a multi-surface scanner with 4 modes that allows you to detect and mark the location of studs, metal and live AC wiringACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to the unique floating head design that keeps the sensor flat on rough and textured surfaces to increase the accuracy of results
Both StudScan and DeepScan modes locate the edges, center and direction of wood or metal studs and joists; Metal Scan mode finds both non-ferrous metal (such as copper pipe) and ferrous metal (such as rebar) even through lath and plaster; AC Scan finds and traces live, unshielded electrical AC wires
WireWarning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan, DeepScan, and Metal Scan modes
Integrated erasable wall marker enables users to mark targets with the simple push of a button
Description
The Zircon MultiScanner 740 center finding electronic wall scanner quickly and easily locates studs, detects metal, locates live, unshielded AC wires and allows you to mark your target. Complete with the latest technology in density detecting software and circuitry, an ergonomic body design, and an erasable marking system. Unlike other wall sensors, scanners and stud finders, the MS 740 is uniquely designed with a "floating head" that keeps the scanning surface level on textured or rough surfaces so results are more accurate. The 4-mode switch makes it easy to change functions while the ultra-bright display screen, dual SpotLite Pointing System, and audio tone all indicate the location of the target. The Signal Strength Indicator helps to distinguish between shallow and deep targets. The MultiScanner 740 also includes ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to a low battery indicator to alert its users to replace its battery for optimal performance results. In StudScan mode, the multifunctional 740 locates the center, edges, and direction of wood or metal studs up to 3/4 of an inch (19 mm) deep. Switch over to DeepScan mode and double the scanning depth to 1.5 inches (38 mm). Metal Scan mode of the MS740 provides the ability to locate non-ferrous metal, such as copper pipes, up to 1.5 inches (38 mm) deep and ferrous metal, such as rebar, up to 3 inches (75 mm) deep. Using Metal Scan mode, studs can be found behind lath and plaster walls, tile, drywall and stucco walls by identifying the consistent pattern of screw or nail heads in the studs. Additionally, the MS 740 is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using the stud and metal scan modes. To detect, locate, map, and trace the live wires, simply switch over to the AC Scan function which finds and traces live, unshielded AC wiring up to 2 inches (50 mm) deep. Then use the integrated, erasable marker to note the progression of the wires, studs, or other objects behind the walls. With the Zircon MS740, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.8. CH Hanson 03040 Magnetic Stud Finder
Feature
Small and compact, easily fits in pocketPowerful magnets allows hands free use
2 way level for ease of marking
No batteries required. Scan Depth: 1 inch
Soft grip for easy grabbing and gentle touch
Description
The CH Hanson 03040 Magnetic Stud Finder aids in locating metal and wood studs, saving you time and hassle when trying to complete a project. Ideal for remodeling, new construction, and DIY projects.9. WALABOT DIY, Stud Finder In-Wall Imager, Cell Phone Wall Scanner for Studs, Pipe, and Wires, (Only Compatible with Android smartphones running versions 6.0 or above)
Feature
Revolutionary In-Wall Multi-Functional SensorReal-time visual image behind concrete & drywall
Sees up to 4 in (10 cm) deep
Detects metal and wooden studs, pipes, PVC, and wires
Works with Android phones running Android v 5.0 and above with USB On-The-Go (OTG)
Not compatible with iPhone and iPads
Detects and tracks the movement of rodents behind the wall
Package includes Walabot DIY device, USB cable, gel pad for adhering to Walabot and the protective film to prevent scratching of walls
For more details and online video tutorials visit the manufacturer website
Description
Android compatible only - not compatible with iPhone and several Android devices. Detects studs (metal & wooden), pipes & wires and movement Works on drywall & concrete Sees 4 in / 10 cm deep into your walls Provides 3 different sensing modes Panoramic, Images and Expert Maps large areas, allows snapshots for offline analysis10. Franklin Sensors FS710PROProSensor 710+ Professional Stud Finder with Built-in Bubble Level & Ruler,Yellow
Feature
ProSensor 710+ Professional Stud Finder with Built-in Bubble Level and RulerSmall
Yellow
