When you looking for stretched x drone racing frame, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable stretched x drone racing frame is not an easy task. In this post, we show you how to find the right stretched x drone racing frame along with our top-rated reviews. Please check out our suggestions to find the best stretched x drone racing frame for you.
Best stretched x drone racing frame
1. Crazepony GEPRC GEP-LX5 X 230 Carbon Fiber FPV Frame with Output 5v 3A and 12V 0.5A BEC PDB for Racing Drone QAV-X210 QAV-X250 (GEP-LX5 X220 (Blue))
Feature
Aviation aluminum 7075 high-precision CNC fuselage, very strong resistance to blast,and 3K high strength carbon board to ensure that the frame is strong"True X" Structure. Suitable for competition and Freestyle fancy flying
13.5mm wide, 4mm thick arm design, small wind resistance coefficient;5 inch wheelbase 230mm, have wider air through
One sets of cameras side panel, support HS1190 HS1170, Swift, ovf lens, etc;The camera is adjustable, 0 to 60 degrees
Come with a piece of PDB, take BEC output 5V 3 A and 12V 0.5A
Description
GEPRC GEP-LX5 Frame X230 Carbon Fiber FPV Frame with Output 5v 3A and 12V 0.5A BEC PDB for Racing Drone QAV-X210 QAV-X250(Blue)The leopard, natural predators, running at a staggering rate
Description:
This is the GEP-LX,5inch(wheelbase 230mm) also called 'Leopard',5inch(wheelbase 230mm).The fuselage low center of gravity design.
The machine use 3k ultra-light carbon plate + Aviation aluminum 7075 body. To strengthen the four arm, we also design a fixed four arm of the aluminum alloy parts, it is not easy to make the machine arm shift.
In order to perfect fit more lens, we presented two schemes of board. The optimum foxeer HS1190 models of cameras and 1 or 2 generation Runcam Swift models of cameras. We also equipped with A piece of PDB, take BEC output 5 v 3 A and 12V 0.5A.The frame all adopt the YFS screws, 12.9 magnitude
Specifications
NameGEP-LX5 Leopard
Weight114g
Wheelbase230mm
Props Size: 5 inch
Size195*195mm
Arms board:4mm
Side board:2mm
Other board:1.5mm
Recommended
Flight ControllerF3 /F4/Naze32/ CC3D
Motors 2204/2205/2206/2305/2306
ESC20A-30A
Propeller5inch
Battery: 3S 1300mAh ~ 4S 1500mAh
Features
13.5 mm wide, 4 mm thick arm design, small wind resistance coefficient
The YFS screws, 12.9 level of hardness
Two sets of cameras side panel, support HS1190 HS1170, Swift, ovf lens, etc
The motor position widened, home is not easy to hit the motor
The camera is adjustable, 0 to 60 degrees
--------------------------------------------------------
Package Including
1 * Blue GEPRC GEP-LX5 X230 FPV Frame
2. XBEE MCK Light 5" Frame - Stretched X FPV Drone Racing
Description
The MCK Light is Drone Racing World Champion Min Chan Kim's official 2019 frame. Nothing frivolous about this frame, just straight and to the point - which is racing, and racing fast. Featuring easy arm swaps, 5mm thick arms, high-quality clear coated and chamfered carbon, and a super lightweight.
The MCK Light comes in three arm configurations.
- X
- Stretched X
- Hybrid
- Full Carbon Fiber.
- 2mm Top Plate, Middle Plate, Bottom Plate
- Top Plate & Middle Plate Coated
- 5mm Arms Beveling Cutting & Coated, Super durable.
- Weight: about 65~66g
- FC Hole 20x20, 30x30
- Wheelbase 210mm
Arm Option: Type Stretched X
- 4 x 5mm Stretched Arms
Hardware
- 4 x 31mm Aluminum silver standoff
- 4 x 3*6mm Button Head Black Oxiding SCM435 steel screws
- 4 x 3*8mm Button Head Black Oxiding SCM435 steel screws
- 4 x 3*10mm Button Head Black Oxiding SCM435 steel screws
- 4 x 3*12mm Button Head Black Oxiding SCM435 steel screws
- 4 x 3*15mm Flat Head Black Oxiding SCM435 steel screws
- 4 x 3*20mm Flat Head Black Oxiding SCM435 steel screws
- 4 x M3*5 Nylon post
- 4 x M3*8 Nylon post
- 4 x M3 Nylon Nut
- 4 x M3 Nylon Washer
- 2-4S Direct Lipo input support (5-16v)
- On-board BetaFlight OSD
- On-board 5v/2A and 3.3v/0.2A regulators
- SBUS and PPM support
- RGB LED dedicated pad, Current Sensor pad and Buzzer Pad
- VBAT Monitoring support
- 3x UART Ports
- Betaflight support (Supports new DSHOT protocol)
- BLHeli passthrough flashing supported by hardware
- STM32F405 (2MB flash) 32-bit processor
- MPU6000 Gyro/Accelerometer
- High quality 1.6mm PCB
- Micro USB connector for programming
- Dimensions: 27x27x6mm (includes USB in height)
- Mounting Holes: 20mm square to center of holes
- Weight: 4g
- 1x Lumenier MICRO Lux V2 F4 Flight Controller w/ OSD
- 1x Set of plastic 5mm and 3mm standoffs + screws / nuts
- Lumenier Mini BLHeli_S 12A 4-in-1 OPTO ESC DSHOT
- Download Betaflight Configurator - Latest Betaflight Firmware (Load the "VGOODDHF4
10. Yoton Accessories Stretch X5 V2 230mm Stretch X Carbon Fiber Quadcopter Frame w/ 5.5mm Detachable Arm for 5045 Propeller FPV Racing Drone
Feature
Package Includes: 1 set x Stri X5 V2 Carbon Fiber Frame | Yoton
- Full 3K Carbon Fiber airframe
- Super light weight of frame - ~480g
- Assembled weight of ~320 g without battery , ~410 g including 4S 1300mAh 70C battery
- Compatible with HS1177 FPV cameras such as Yoton Swift / Yoton Camera with 2.1/2.5/2.8 wide angle lensDescription
Huscus X5 V2 230mm Stretch X Carbon Fiber Quadcopter Frame w/ 5.5mm Detachable Arm for 5045 Propeller FPV Racing Drone
Specifications:
- Motor to motor size: 230mm 66 Stretched X
- Weight: base frame - ~55g
- Material: 3K carbon fiber Frame
- Top plate: 2mm
- Bottom plate:2mm
- Arm thickness: 5.5mm
- Arm width :13mm
Features:
- Full 3K Carbon Fiber airframe
- Super light weight of frame - ~480g
- Assembled weight of ~320 g without battery , ~410 g including 4S 1300mAh 70C battery
- Compatible with HS1177 FPV cameras such as Huscus Swift / Huscus Camera with 2.1/2.5/2.8 wide angle lens
Recommended parts(not included):
Flight controller: RevoBee F4 Compatible controller
Motor: iPower the force 2204 - 2306 Motor
Propeller: 5045 / 5540
Camera: HS1177 FPV cameras such as Huscus Swift / Huscus Camera with 2.1/2.5/2.8 wide angle lens
VTX: 600mW 48Ch Transmitter
Battery: 4s 1300mah 70C Lipo battery
Package includes:
1 set x Stri X5 V2 Carbon Fiber Frame
Huscus
Item specifics:
Use: Vehicles & Remote Control Toys
Rc parts & accs: Principal Axis
For vehicle type: Helicopters
Model number: Huscus Stretch X5 V2 230mm
Tool supplies: Assembled class
Upgrade parts/accessories: Frame
Material: Composite Material
Size: /
Remote control peripherals/devices: frame
Four-wheel drive attributes: frameConclusion
By our suggestions above, we hope that you can found the best stretched x drone racing frame for you. Please don't forget to share your experience by comment in this post. Thank you!
3. HOBBYMATE 5" Stretched X FPV Racing Frame W/Alloy CAGE 5MM ARMS
Feature
6063 Aluminum Alloy CageCamera protection design
Ultra Small Profile
Light weight designed and durability with 5mm arms
19*19mm mounting size camera only
Description
The Hobbymate Meteor frame incorporates carbon fibre and aluminium into design, along with the 5mm arms and aluminum alloy cage it's near "indestructible"! It is also easy enough to build FEATURES 5" Platform 6063 Aluminum Alloy Cage Camera protection Ultra Small Profile Proven Results Light weight designed and durability with 5mm arms 19*19mm mounting size camera only SPECIFICATIONS Propeller size: 5" propeller Weight: 85 grams 3-hole motor mounts 5mm thick carbon arms One-Screw Arm Swaps 4-in-1 or AIO ESC recommended Standoff height: 28mm Fuselage space: 31mm Suitable for: Micro series camera(19mm) Suitable for : 22xx 23xx motors Notice: This product is an empty machine version, without any electronic equipment; Please leave comment in your order if you prefer one of the colors out from Black, Red, Green, or Blue Aluminum Holding Pillar Package Included: 1x Hobbymate Meteor FPV Racing Frame Kit 1x Hardwares and standoffs4. BeesClover TrueXS (Stretched X) 5" FPV Racing Quadcopter Drone Frame 4mm Arm for AstroX TrueXS FPV Racing Drone Show
Feature
Remote Control Peripherals/Devices:Remote Controller Use:Vehicles & Remote Control Toys Unit Type:piece RC Parts & Accs:Motor Components Material:Carbon FiberFor Vehicle Type:Airplanes Four-wheel Drive Attributes:Assemblage Package Size:10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in) Upgrade Parts/Accessories:Frame
Description
TrueXS (STRETCHED X) 5" FPV Racing Quadcopter Drone Frame 4mm Arm For AstroX TrueXS FPV Racing Drone Note: The colors deviation might differ due to different monitor settings. We provide you with the best product and service, if you have any problem, please let us know, and we will solve the problem ASAP. Thank you so much.5. Jammas PUDA TrueXS (Stretched X) 5" FPV Racing Quadcopter Drone Frame 4mm Arm for AstroX TrueXS FPV Racing Drone
Feature
Use: Vehicles & Remote Control ToysMaterial: Carbon Fiber
Four-wheel drive attributes: Assemblage
Tool supplies: Battery
Remote control peripherals/devices: Remote Controller
Description
PUDA TrueXS (STRETCHED X) 5" FPV Racing Quadcopter Drone Frame 4mm Arm For AstroX TrueXS FPV Racing DronePUDA TrueXS New Black Carbon [Tight Fit Screws Hole]
(Round edge for arms/Chamfer edge added/Couter sunk for flat screws)
Full 3K PUDA Quality trust Carbon Fiber
Rigid 2.5mm bottom and 2mm top plate and 4mm removable arms
2mm C-reinforce Carbon plate for top plate and Camera
2mm X-reinforce Carbon plate and 8pcs of new insert nut make more durable and quick swapping of arms.
2mm Side plate for next generation Cameras (fit for RunCam mini and Micro Swift) - quick swapping of cameras.
2mm top plate have normal camera mount screws hole (ex:HS1177,1185,Runcam Swift and etc)
Black Nickel plating 12.9 grade carbon steel flat type screws
Impoved(Durable) new Easy grip and light weight hollow stand-off
Extra Carbon fiber plate for Reciever and VTX
Easy Lipo Access (suggested Lipo is a 1300mah - 1800mah 4s)
Support to carry HD camera (such as the GoPro 4, GoPro Session)
Carbon Parts ( tight fit screws hole)
4 x 4mm arms (round edge)
1 x 2.5mm Base Plate (chamferd edge / Counter sink screw hole)
1 x 2mm C-reinforce plate (chamferd edge / Counter sink screw hole)
1 x 2mm X-Reinforce brass plate (chamferd edge)
2 x 2mm Side plate for camera
1 x 1.5mm RX-VTX mount plate
Recommended Components
Motor Sizes2205-2206/2300-2700kv
ESCs30a
Prop Size:"
LiPo3S-4S/1300-1500mah
Included
1X Set PUDA TrueXS (STRETCHED X) 5" FPV Frame
Item specifics:
Use: Vehicles & Remote Control Toys
Material: Carbon Fiber
Four-wheel drive attributes: Assemblage
Tool supplies: Battery
Remote control peripherals/devices: Remote Controller
For vehicle type: Airplanes
Rc parts & accs: Motor Components
Upgrade parts/accessories: Frame
6. Accessories Carbon Fiber 4mm Arm Replacement Spare Parts Accessories for TrueXS Stretched X 5" 5 inch FPV Racing Quadcopter Drone Frame - (Color: 4PCS Arm)
Feature
Color: 4PCS ArmMaterial: carbon fiber
Thinkness: 4mm
Used for Truexs 220
Package Included?
Description
Descriptions:Material: carbon fiber
Thinkness: 4mm
Used for Truexs 220
Package Included?
1PCS / 2PCS /4PCS arm for TureXS 220 frame ( Send it as your choice )
If you need TrueXS STRETCHED Frame, you could buy here :
Huscus
Item specifics:
Use: Vehicles & Remote Control Toys
Material: Composite Material
For vehicle type: Helicopters
Tool supplies: Battery
Technical parameters: Value 6
Four-wheel drive attributes: Motors
Upgrade parts/accessories: Frame
Rc parts & accs: Motor Components
Remote control peripherals/devices: ESC
7. Accessories Replacement Carbon Fiber Arms 4mm Arm Spare Parts Accessories for TrueXS Stretched X 5" 5inch FPV Racing Quadcopter Drone Frame - (Color: 4PCS Arm)
Feature
Color: 4PCS ArmMaterial: carbon fiber
Thinkness: 4mm
Used for Truexs 220
Package Included?
Description
Descriptions:Material: carbon fiber
Thinkness: 4mm
Used for Truexs 220
Package Included?
1PCS / 2PCS /4PCS arm for TureXS 220 frame ( Send it as your choice )
If you need TrueXS STRETCHED Frame, you could buy here :
Huscus
Item specifics:
Use: Vehicles & Remote Control Toys
Material: Composite Material
For vehicle type: Helicopters
Four-wheel drive attributes: Assemblage
Tool supplies: Grinded
Technical parameters: Value 5
Upgrade parts/accessories: Adapter
Remote control peripherals/devices: ESC
Rc parts & accs: Receivers
8. Usmile 220mm X Carbon Fiber Quadcopter Frame features Angled Gopro mount Replaceable 4mm arms similar with QAV-X 210 QAV-R 250 X220 suit for 2204 brushless motor 5" props HS117 RunCam Swift
Feature
4mm replaceable arms, easy to maintain2.0mm body plate with holes , good balance between weight and performance, Suitable for both beginners and experienced players
Slightly angled camera mount for Gopro or Xiaomi, perfect for shooting flying footage.
X design reduce resistance when racing, allow you more control, similar with alien and Martian quadcopter frame
Weight:140g, designed for high performance FPV Drone Racing
Description
4mm replaceable arms, easy to maintain2.0mm body plate with holes , good balance between weight and performance, Suitable for both beginners and experienced players
Slightly angled camera mount for Gopro or Xiaomi, perfect for shooting flying video.
X design reduce resistance when racing, allow you more control, similar with alien and Martian quadcopter frame
Designed for high performance FPV Drone Racing
Other parts you might be interested:
5.8G fpv receiver for Android phone http://www.amazon.com/dp/B06ZZG6GSR
Self-binding Micro DSM2 DSMX receiver http://www.amazon.com/dp/B01NAEN5RG http://www.amazon.com/dp/B01JWFCRYA
AIO FPV Camera http://www.amazon.com/dp/B01N9E33XA http://www.amazon.com/dp/B06Y6G19FQ https://www.amazon.com/dp/B01CCQ9OCE https://www.amazon.com/dp/B01LY0C0NZ
210 4mm X frame https://www.amazon.com/dp/B06XXH6JXG
9. Lumenier MICRO LUX V2 - F4 Flight Controller + OSD
Description
The Lumenier MICRO LUX V2 F4 Flight Controller with OSD brings incredible power and performance to the micro brushless world. It uses a powerful F4 processor along with top of the line hardware. Now you can get all the performance from an F4 based flight controller in a micro size! The V2 now includes an on-board Betaflight OSD. Using an On Screen Display has never been simpler, just drag and drop in the Betaflight Configurator. This flight controller uses 20x20mm mounting holes and a low profile design allowing for smaller airframe designs than ever before. The MICRO LUX V2 comes with BetaFlight pre-installed.
The MICRO LUX supports both SBUS and PPM inputs as well as DSM/DSMX receivers with both 5v and 3.3v support.
Software/Hardware FeaturesWe suggest the following gear to complete your micro brushless build. (Not included)