Finding the best safety harness for construction suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best safety harness for construction
1. KwikSafety (Charlotte, NC) THUNDER Safety Harness | ANSI OSHA Full Body Personal Fall Protection 1 Dorsal Ring 2 Side D-Rings & Pass Through Buckle Straps Construction Industrial Tower Roofing Tool
Feature
PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety Full Body Harness supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, ensure that all pass-through connectors are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.REDUCE THE FEAR FACTOR: Our KwikSafety 3D Industrial Full Body Harness has one (1) Dorsal Ring that is located on the back of the Harness and two (2) on the hip for work positioning purposes only. The Dorsal Ring is primary used for fall arrest & also used for restraint & rescue. During a fall, the load is directed through the shoulder straps and around the thighs bringing you to an upright position with a slight lean to the front with some pressure may occur on the lower chest.
SAFETY DESIGN REQUIRMENTS: If a fall were to occur, we want to ensure your safety by designing a safe and secure full body harness. The load bearing straps of our 3D Full Body Harness is made out of pure non-recycled synthetic material, which has the strength, ageing, abrasion and heat resistance that is equivalent or superior to polyester, and is lock stitched and securely back stitched together.
ANSI COMPLIANT: ANSI/ ASSE Z359.11-2014: All of our KwikSafety Full Body Harnesses have undergone the 'Qualification and Verification Testing of Fall Protection Products'. This testing specifies requirements which include the number of specimens to be tested, test equipment to be used, the accreditation of the testing lab and the duties and responsibilities of both the manufacturer and the testing lab. View the Compliance Label/ Safety Label for more information.
OSHA APPROVED: The Occupational Safety & Health Administration was created by Congress to assure men & women safe and healthful working conditions by setting standards and providing training, outreach, education and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels & usually consist of a full body harness, a declaration device, a lanyard and a an anchor point. Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Search and Rescue.
Description
Our OSHA Approved and ANSI Compliant KwikSafety High Quality Fall Protection Safety Harness is great for any industry and any application. It has 1 -inches wide yellow load bearing straps and black lock stitched webbing to keep you safe and secure while working and if a fall were to occur. Our bright yellow load bearing straps are visible in various weather conditions: direct sunlight, foggy, dusty and dim-light. A Single (1) Dorsal Ring is located on the back of the Full Body Harness and is used as the primary fall arrester attachment. Two D-Rings are located on the hips of the Safety Harness for work positioning uses only. Attachments to the hip rings should be used in pairs for all job types including arborist, utility workers climbing poles, construction workers tying rebar and climbing on form walls. Water repellent safety webbing ergonomically supports back and hips while bearing the weight of the user as well as the weight of tools that may be attached. Here at KwikSafety craftsmanship, care and pride is taken with a critical eye when it comes to our products and to the workers safety. Our KwikSafety 3D Ring Safety Harness meets or exceeds all applicable industry standards including OSHA and ANSI and is Government Approved, DOD Approved, Airport & Port Approved, and RapidGate and TWIC Approved. Great for use at Ports, Airports, Highways, Military Installations and Other Government Facilities. Our KwikSafety Full Body Harness is a One Size Fits Most with a height range of 4'10" to 6'6"; and a weight range of 130 lbs. to 310lbs. If happened to order the wrong size or item, we offer Hassle Free Returns within 30 days if your item was shipped via Amazon FBA!2. Guardian Fall Protection (Qualcraft) 00815 BOS-T50 Bucket of Safe-Tie with Temper Anchor, 50-Foot Vertical Lifeline Assembly and HUV
Feature
Perfect set for home fall protection gearUniversal harness HUV (01101) with 5 points of adjustment for added comfort.Body Wear Velocity Harness (S - L)
Vertical Lifeline Assembly with Shock Pack, and permanently attached Positioning Device with 18" lanyard extension to keep device within reach
1Heavy Duty Temper Reusable Anchor (00455)
A Guardian Fall Product
Description
FEATURES: 1 Temper Anchor 50' VLA Shock Pack Positioning Device with 18" extension lanyard HUV harness Easy Carry and storageThe Guardian Fall Protection "Bucket of Safe-Tie" offers an all in one approach to fall protection. Each one includes a type of anchor, lanyard and harness conveniently carried in a storage device.3. Guardian Fall Protection 11200 IS-72 6-Foot Internal Shock Lanyard with snap hooks
Feature
Made with a heavy duty outer polyester webbing and a polyester core specially sewn in to reduce impact forcesLightweight
A Guardian Fall Product
6 feet in length
Single leg lanyard
Description
Made with heavy duty outer polyester webbing and a polyester core specifically sewn in to reduce impact forces; does not stretch and has no shock pack; lightweight.4. Guardian Fall Protection 11173 M-L Seraph Construction Harness with Side D-Rings
Feature
Quick adjust torso bucklesSix points of adjustment
Stretchability in the shoulder straps
Hammer loops
Tongue buckle leg straps and side D-rings
Description
Specially designed with six points of adjustment and stretchable shoulder straps; the product includes: shoulder pads, cradle seat, quick adjust torso buckles, padded waist belt, D-ring lanyard keepers (which double as retrieval hoists), impact indicator, hammer loops and tongue buckle leg straps; the model's size is built specifically for individuals whose height ranges from 5' to 6'3" and whose weight ranges from 140 to 250 lbs.5. DBI/Sala ExoFit NEX, 1113127 Construction Harness, Alum Back/Side D-Rings, Locking Quick Connect Buckles, Sewn In Hip Pad & Belt, Large, Blue/Gray
Feature
HYBRID SHOULDER, BACK AND LEG COMFORT PADDING: Lightweight, moisture wicking and breathable padding with soft edging wraps around the wearer for the ultimate in comfort, security and no-tangle donning.BODY BELT/HIP PAD WITH TECH-LITE ALUMINUM SIDE D-RINGS: Provides hip D-rings ideal for positioning, additional back lumbar support and tool carrying options.
DUO-LOK QUICK CONNECT CHEST AND LEG STRAPS: Lightweight one-handed use with memory fit web-lock ensures fast, non-slipping connections.
IMPACT INDICATOR: Rip-stitch indicators allow you to inspect the harness at a glance, for prior damaging impact loads.
INTEGRATED TRAUMA STRAPS: Provide an adjustable, continuous loop for post fall, minimizing suspension trauma.
BUILT IN REFLECTIVE MATERIALS: Integrated on legs, chest, shoulders and back for enchanced visibility in low light conditions.
Hybrid shoulder, back, leg and hip padding with premium comfort and durability
Revolver vertical torso buckles make non-slip adjustment of shoulder straps fast and easy
Duo-Lock quick connect buckles with memory-fit web-lock ensures an exact fit every time
Repel web technology extends harness life by resisting moisture and abrasion
Integrated suspension trauma straps provide relief in a fall
Description
ExoFit NEX harnesses are the most advanced harnesses in the industry. Theyre the culmination of our experience with ExoFit and ExoFit XP, ongoing research and the incorporation of new materials and innovative features. True to our NEX mission, we manufacture these harnesses using materials that wont add unnecessary weight for ultimate comfort. When speed and efficiency are project requirements, ExoFit NEX will provide the freedom and confidence to function at your maximum potential. Finally, ExoFit NEX harnesses are designed using materials that last.Get into the best, the ultimate comfort, funiction and durability harness, ExoFit NEX.6. Guardian Fall Protection 21030 Cyclone Construction Harness with QC Chest/TB Leg/TB Waist Belt/Side D-Rings, Black/Yellow
Feature
Employees can personalize their harnesses without jeopardizing the integrity of the webbingFully adjustable shoulder, chest strap & leg straps
Easy adjustment combination buckles
Unique aesthetic stitch pattern for enhanced strength
Description
The Guardian Fall Protection "Cyclone HUV Harness" is designed with the unique x back which leaves the harness straps tangle free. An ideal combination for fall arrest, work positioning, rescue and rope access applications.7. KwikSafety (Charlotte, NC) HURRICANE | OSHA ANSI Fall Protection Full Body Safety Harness w/Back Support | Personal Protective Equipment | Dorsal Ring Side D-Rings | Construction Industrial Roofing
Feature
PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety Full Body Harness with Back Support supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, ensure that all pass-through connectors are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.REDUCE THE FEAR FACTOR: Our KwikSafety 3D Industrial Full Body Harness with Back Support has one (1) Dorsal Ring that is located on the back of the Harness and two (2) on the hip for work positioning purposes only. The Dorsal Ring is primary used for fall arrest & also used for restraint & rescue. During a fall, the load is directed through the shoulder straps & around the thighs bringing you to an upright position with a slight frontal with some pressure may occur on the lower chest.
SAFETY DESIGN REQUIRMENTS: If a fall were to occur, we want to ensure your safety by designing a safe and secure full body harness. The load bearing straps of our 3D Full Body Harness with Back Support is made out of pure non-recycled synthetic material, which has the strength, ageing, abrasion and heat resistance that is equivalent or superior to polyester, and is lock stitched and securely back stitched together.
ANSI COMPLIANT: ANSI/ ASSE Z359.11-2014: All of our KwikSafety Full Body Harnesses have undergone the 'Qualification and Verification Testing of Fall Protection Products'. This testing specifies requirements which include the number of specimens to be tested, test equipment to be used, the accreditation of the testing lab and the duties and responsibilities of both the manufacturer and the testing lab. View the Compliance Label/ Safety Label for more information.
OSHA APPROVED: The Occupational Safety & Health Administration was created by Congress to assure men & women safe and healthful working conditions by setting standards and providing training, outreach, education and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels & usually consist of a full body harness, a declaration device, a lanyard and a an anchor point. Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Search and Rescue.
Description
Our OSHA Approved and ANSI Compliant KwikSafety High Quality Fall Protection Safety Harness is great for any industry and any application. It has 1 -inches wide yellow load bearing straps and black lock stitched webbing to keep you safe and secure while working and if a fall were to occur. Our bright yellow load bearing straps are visible in various weather conditions: direct sunlight, foggy, dusty and dim-light. A Single (1) Dorsal Ring is located on the back of the Full Body Harness and is used as the primary fall arrester attachment. Two D-Rings are located on the hips of the Safety Harness for work positioning uses only. Attachments to the hip rings should be used in pairs for all job types including arborist, utility workers climbing poles, construction workers tying rebar and climbing on form walls. Water repellent safety webbing ergonomically supports back and hips while bearing the weight of the user as well as the weight of tools that may be attached. Here at KwikSafety craftsmanship, care and pride is taken with a critical eye when it comes to our products and to the workers safety. Our KwikSafety 3D Ring Safety Harness with Back Support meets or exceeds all applicable industry standards including OSHA and ANSI and is Government Approved, DOD Approved, Airport & Port Approved, and RapidGate and TWIC Approved. Great for use at Ports, Airports, Highways, Military Installations and Other Government Facilities. Our KwikSafety Full Body Harness is a One Size Fits Most with a height range of 4'10" to 6'6"; and a weight range of 130 lbs. to 310lbs. If happened to order the wrong size or item, we offer Hassle Free Returns within 30 days if your item was shipped via Amazon FBA!8. Guardian Fall Protection 193131 Construction Premium Edge Harness with Quick Connect Chest Buckle, Waist Tounge Buckle and Leg Tounge Buckles, M-XLarge
Feature
5 points of adjustmentPremium Edge Series Harnesseswere awardedan International Design Excellence Award in 2007
Closed Cell foam padded waist belt
Side positioning D-rings
Slide on tool belt included
9. 3 D-Ring Industrial Fall Protection Safety Harness ANSI Compliant Full Body Personal Protection Equipment 5-Point Adjustment Universal 310 lbs
Feature
ERGONOMIC DESIGN FOR PROPER FIT: The combination of "No-loose-ends" shoulders straps, legs straps and chest strap design with Pass-Thru Premium quality alloy steel mating buckles helps reduce both the carried weight and required energy for all-day job performance for users within the capacity range of 130 to 310 pounds (59 to 140 kg). It's General Size great for construction workers, carpenters, painters, roofers, tower climbers, window cleaners etc.SAFETY DESIGN PERFORMANCE:WELKFORDER Full Body Harness WFH001 are used for fall arrest, positioning, travel restraint, suspension and rescue applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. After a fall, our Full Body Harness will support users and post fall at an angle within 30 to vertical. Each of our products is Individually inspected.
HARDWARE COMPONENTS QUALITY ASSURED: WELKFORDER Full Body Harness WFH001 has 3 D-Rings all of Min. Breaking strength 5000lbs/22KN, one dorsal D-ring to match any foreseeable fall arrest working condition, two Waist D-ring for better work position only. Five Adjusting mating buckles with stamping steel material of Min. Breaking strength 4000lbs/18KN on adjusting straps for superior fit provides both premium comfort and safety.
WEBBING & STITCHING QUALITY ASSURED: WELKFORDER Full Body Harness is lightweight with webbing of tangle free to help keep you comfortable. All straps are made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 27KN/6000lbs. All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported.
ANSI/ ASSE Z359.11-2014 AND OSHA COMPLIANT: WELKFORDER Full Body Harness is ANSI/ ASSE Z359.11-2014 compliant and in compliance with the requirements of OSHA 1926.502(d) (16) that based on basic fall safety principles have been incorporated into these standards, including hazard survey, hazard elimination and control. The primary intent is to ensure a proactive approach to fall protection.
Description
- WELKFORDER Full Body Harness is fully fulfilled fall protection system by distributing the force of the fall over a large area of the body, ensuring that the subject of the fall remains suspended in an upright position after the fall has occurred.
- High UV resistance webbing & thread are both available as alternative for the harness which would may be exposed in the scorching sunshine for a long time.
- The Full Body Harness is a General Size with a height range of 4'10" to 6'1"; and a weight range of 130 lbs to 310lbs. Compliant by ANSI/ASSE Z359.11-2014
- If the item or style cannot fulfill your satisfaction, we offer Free Returns within 30 days! Besides, we will provide you professional customer service related to all your questions of our products.If you have any questions, please feel free to contact us. We will reply you as soon as possible.
10. Warthog 5 Point Full Body Universal Harness with Side D-Rings and Tongue Buckle Legs (S-M-L)
