Finding the best pipe warmer heating cable suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best pipe warmer heating cable
1. GardenHOME Pipe and Valve Heating Cable (6Feet)
Feature
SECURED PROTECTION, protects pipes from 6-8 feet (1.83-2.44 m) and up to 1-1 1/2 inches (25.4-38.1 mm) in diameter - 2 PackEASY INSTALLATION, just put our Icebreaker cable along the pipes to keep ice and coldness away (Recommended for use on water-filled metal and rigid plastic pipes). Grounded cord and plug.
ENERGY SAVING, THERMOSTAT CONTROLLED, the built-in thermostat can sense the temperature of the pipe. It turns the cable on at 38F and turns it off automatically when the pipe has been heated to a temperature of approximately 45F.
ECONOMICAL, reliable low wattage design saves up to 70% energy than other cables and protects your cable to -50F.
DURABLE, weather resistant PVC outer jacket and inner insulation. It will operate for years without requiring maintenance.
Description
Description
Say goodbye to frozen pipes in the winter with the GardenHome Pipe Heating Cable - 6 ft. (1.83 m). This temperature-controlled cable runs along pipes and valves, thawing frozen pipes. The built-in thermostat will sense the temperature of the pipe and turn the cable on and off to provide the most economical solution for frozen pipe disasters.
How it Works
Before applying the heating cable, make sure that the area on and around the pipe is clear and that the heating cable is warm and pliable. Simply plug the cable into the nearest grounded electrical receptacle, secure the thermostat tightly against the pipe with electrical tape, secure the heating cable straight along the pipe, and let the heating cable work its magic. The built-in thermostat will automatically detect the temperature of the pipe and turn the cable on when exposed to temperatures below 38F for frost-free pipes all winter long. It will shut the heating cable off when the pipe has been heated to a temperature of approximately 45F, incurring no extra electricity costs.
2. 9milelake Cold Weather Pipe and Valve Heating Cable with Built-in Thermostat - 9 Feet
Feature
Pre-assembled for easy installation,Easy Heat pipe heating cable installs quickly and easily to keepIncludes grounded plug, built in thermostat, and instructions,
Each cable consists of tough PVC inner insulation, a continuous ground braid, and weather-resistant
units are activated and de-activated by an integral energy-saving thermostat
Approved for rigid plastic and metal pipe
Description
Description Say goodbye to frozen pipes in the winter with the 9milelake Pipe Heating Cable - 9 ft (2.7 m).This temperature-controlled cable runs along pipes and valves, thawing frozen pipes.
The built-in thermostat will sense the temperature of the pipe and turn the cable on and off to provide the most economical solution for frozen pipe disasters.
Use only on water-filled metal & plastic pipes.
How it Works Before applying the heating cable, make sure that the area on and around the pipe is clear and that the heating cable is warm and pliable.
Simply secure the thermostat tightly against the pipe with electrical tape, secure the heating cable straight along the pipe, plug the cable into the nearest grounded electrical receptacle, and let the heating cable work its magic.
The built-in thermostat will automatically detect the temperature of the pipe and turn the cable on when exposed to temperatures below 38F (3C) for frost-free pipes all winter long.
It will shut the heating cable off when the pipe has been heated to a temperature of approximately 45F, incurring no extra electricity costs. What's Included Package includes cable with grounded plug and built in thermostat, user-friendly instructions
3. Thermwell Products HC18 Pipe Heat Cable 18 ft.
Feature
18 ft. Length.120V, 7 watts per ft.
Keeps water flowing down to -40 degrees F.
For metal and plastic pipes
Description
Frost King automatic heat cables with self regulating thermostat keeps pipes from freezing down to as cold as 38 below zero. Available in lengths from 3' to 30'.4. WRAP-ON Pipe Heating Cable - 3-Feet, 120 Volt, Built-in Thermostat, Low Wattage - 31003
Feature
BUILT-IN THERMOSTAT - Turns the cable on at 38 degrees F and prevents frozen pipes to -50 degrees F - Simply wrap on, insulate and plug in. Insulation sold separately.PRESS-TO-TEST BUTTON - Exclusive feature to test cable before or after installation.
ENERGY EFFICIENT - Uses up to 65% less energy at 2 watts per foot vs other cables at 7 watts per foot.
USE ON ALL RIGID PIPES - PVC, CPVC, copper and metal pipes.
MADE IN THE USA
Description
Prevents frozen water pipes to 50F. Simply wrap on, insulate and plug in. Engineered for use on metal and rigid plastic pipes. Uses an exclusive Press-To-Test button so you can test the cable before installing. A built-in thermostat turns the cable on at 38F. Proven low-wattage design uses up to 65 percent less energy at 2 watts a foot vs. other cables at 7 watts a foot, and protects to 50F. An exclusive power sensor light glows when the thermostat is closed. Each package contains one ready-to-install pipe heating cable along with installation instructions. To install, you will also need PVC/electrical tape, fiberglass pipe insulation, a tape measure and eye protection. Warning: This cable has been designed for the sole purpose of preventing metal and rigid plastic water filled lines from freezing. DO NOT use this product on fuel lines, drain lines, hoses or buried pipes. Fiberglass pipe wrap is required to complete the installation. Read and follow all instructions. Cables are available in various lengths. See chart to determine the length required for your application.5. Easy Heat AHB-013 Cold Weather Valve and Pipe Heating Cable, 3-Feet,black
Feature
Manufactured in chinaEasy to use
Highly durable
Easy Heat pipe heating cable installs quickly and easily to keep water flowing down to -40 F (-40 C)
Prevents pipe freeze-ups
Includes heating cable, grounded plug, built in thermostat and instructions
Designed for rigid plastic and metal pipes up to 1.5" (38mm) in diameter
Built-in thermostat saves energy by powering the cable only when needed
Turns on below 38 F (3 C) and off above 45 F (7 C)
Plug indicator light assures the system has power
Plugs into a standard 120 VAC outlet
Constructed of weather resistant PVC outer jacket, continuous ground braid and polyethylene inner insulation
UL listed and CSA certified
Description
Temperature-controlled cable runs straight along pipe and valves, held in place by application tape and plugs into grounded electrical outlet. Keeps water flowing down to -380. For odd lengths of pipe over 3/4-inch in diameter, we recommend two separate cables on opposite sides of the pipe with up to 3-feet of overrun at center of pipe run. Metal pipe requires 1/2-inch fiberglass insulation around cable. For plastic pipe, its recommended wrapping pipe with aluminum foil before cable installation. The traditional resistance cable produces a fixed amount of heat based on the electrical line feed. It comes with a built-in thermostat that switches the flow of electricity on and off based on temperature. Cable installs fast and easy. Each package contains grounded plug, built in thermostat and instructions. Cable has weather resistant PVC outer jacket and inner insulation. Keeps water flowing down to 40 F. Features power indicator light, 3 wire grounded cord, and plug. 7-Watt per foot, 120-Volt. Approved for rigid plastic and metal pipe. UL listed. No. AHB013: 3-Inch No. AHB016: 6-Inch No. AHB019: 9-Inch No. AHB112: 12-Inch No. AHB115: 15-Inch No. AHB118: 18-Inch No. AHB124: 24-Inch No. AHB130: 30-Inch6. 9milelake Cold Weather Pipe and Valve Heating Cable with Built-in Thermostat 38f Off 45f On- 24 Feet
Feature
Pre-assembled for easy installation,Easy Heat pipe heating cable installs quickly and easily to keepIncludes grounded plug, built in thermostat, and instructions,
Each cable consists of tough PVC inner insulation, a continuous ground braid, and weather-resistant
units are activated and de-activated by an integral energy-saving thermostat
Approved for rigid plastic and metal pipe
Description
Description Say goodbye to frozen pipes in the winter with the 9milelake Pipe Heating Cable - 24 ft (7.2 m).This temperature-controlled cable runs along pipes and valves, thawing frozen pipes.
The built-in thermostat will sense the temperature of the pipe and turn the cable on and off to provide the most economical solution for frozen pipe disasters.
Use only on water-filled metal & plastic pipes.
How it Works Before applying the heating cable, make sure that the area on and around the pipe is clear and that the heating cable is warm and pliable.
Simply secure the thermostat tightly against the pipe with electrical tape, secure the heating cable straight along the pipe, plug the cable into the nearest grounded electrical receptacle, and let the heating cable work its magic.
The built-in thermostat will automatically detect the temperature of the pipe and turn the cable on when exposed to temperatures below 38F (3C) for frost-free pipes all winter long.
It will shut the heating cable off when the pipe has been heated to a temperature of approximately 45F, incurring no extra electricity costs. What's Included Package includes cable with grounded plug and built in thermostat, user-friendly instructions
7. 9milelake Cold Weather Pipe and Valve Heating Cable with Built-in Thermostat - 3 Feet
Feature
Pre-assembled for easy installation,Easy Heat pipe heating cable installs quickly and easily to keepIncludes grounded plug, built in thermostat, and instructions,
Each cable consists of tough PVC inner insulation, a continuous ground braid, and weather-resistant
units are activated and de-activated by an integral energy-saving thermostat
Approved for rigid plastic and metal pipe
Description
Description Say goodbye to frozen pipes in the winter with the 9milelake Pipe Heating Cable - 3 ft (0.9 m).This temperature-controlled cable runs along pipes and valves, thawing frozen pipes.
The built-in thermostat will sense the temperature of the pipe and turn the cable on and off to provide the most economical solution for frozen pipe disasters.
Use only on water-filled metal & plastic pipes.
How it Works Before applying the heating cable, make sure that the area on and around the pipe is clear and that the heating cable is warm and pliable.
Simply secure the thermostat tightly against the pipe with electrical tape, secure the heating cable straight along the pipe, plug the cable into the nearest grounded electrical receptacle, and let the heating cable work its magic.
The built-in thermostat will automatically detect the temperature of the pipe and turn the cable on when exposed to temperatures below 38F (3C) for frost-free pipes all winter long.
It will shut the heating cable off when the pipe has been heated to a temperature of approximately 45F, incurring no extra electricity costs. What's Included Package includes cable with grounded plug and built in thermostat, user-friendly instructions
8. Pentair 777445-000 Frostex Pipe Heating Cable - 100' Spool
Feature
Prevents above ground residential water pipes from freezingUses a self-regulating conductive core that reacts to changes in temperature
As the environment becomes colder, cable resistance decreases and more heat is generated
As the environment warms, cable resistance increases and less heat is generated
100' Frostex spool
Description
The Frostex pipe freeze protection system prevents above ground residential water pipes from freezing. The system includes a 3 watt per foot electric heat trace cable, 9800 FlexFit plug kit and 9610 application tape. The heat trace cable uses a self-regulating conductive core that reacts to changes in temperature. As the environment becomes colder, cable resistance decreases and more heat is generated. Conversely, as the environment warms, cable resistance increases and less heat is generated. The Frostex 9800 FlexFit plug kit is used to terminate the heating cable. The 9800 includes a specially designed ground-fault protected plug and an end seal for sealing the cable end that does not plug in, as well as a power indication signal light.9. Bayco SL-302B3 10-1/2-Inch Brooder Clamp Light with Porcelain Ceramic Socket
Feature
Durability and Safety tested for the toughest situationsDesigned in the USA with quality materials
Used in Tactical, Outdoor, Recreation levels
Lights 50-Percent More Area than a Standard 8-1/2-Inch Clamp Light
Heat Resistant Porcelain Socket
Rated at up to a 300-Watt Incandescent Bulb
Adjustable Ball Joint for Easy Positioning
Spring Steel Clamp with Scratch Resistant Vinyl Sleeve
Description
Bayco SL-302B3 10-1/2-Inch Brooder Clamp Light with Porcelain Ceramic Socket is designed with a heat resistant porcelain socket and will light up 50-Percent more workspace than a standard 8-1/2-Inch clamp light. For easy positioning, it features an adjustable ball joint and a spring steel clamp with a scratch resistant vinyl sleeve. Bayco is the established leader in next generation task lighting systems incorporating innovative technology for all types of lighting applications. Our dedicated research and development teams continually seek out innovative technical solutions for demanding professional and non-professional lighting applications.10. Radimo RADIMAT-75-120 120V Under Floor Heating System, 75 sq. ft.
Feature
Safe, Tested, Certified and Ideal for Tile & Stone floorsEasy Installation & 10-year warranty
Only 1/8" thick for thin-profile installations
electric radiant floor heating, infloor heat, heated floors, warm tile floors
