Finding the best machinist inspection tool set suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best machinist inspection tool set
1. iGaging Digital Electronic Micrometer 0-1"/0.00005" and Caliper 0-6"/0.0005" Set Machinist Inspection Tool Kit
Feature
2 Essential Measuring ToolsIP54 Splash Water, Oil and Dust Resistant
Super high precision
Caliper shows Inch/mm/Fractions Micrometer Shows Inch/mm
Includes spare batteries
Description
Professional Grade Tools, SUPER Precision, IP54 Fluid Resistant!
0-1" (0-25mm) Micrometer:
Crisp, clear, easy-to-read LCD display, accurate to 0.00016''. Hardened and ground spindle with carbide anvil ensure durability and accuracy. Comes in a padded case with adjustment wrench, instructions booklet and extra battery.
Features:
- 2 measuring modes Metric/Standard
- IP54 Splash Water, Oil and Dust Resistant
- Large LCD Display
- Absolute & Incremental Modes
- Automatic Switch Off
- Accuracy +/- 0.00016"
- Range 0-1"/0-25mm
- Resolution 0.00005"/0.001mm
- Carbide Measuring Surfaces
- Direct RS232 SPS Output
- Meet or Exceeds Federal Accuracy Standards
Super high quality measuring device. Easy read with the largest LCD display available. No other caliper offer you 4 digits decimal in SAE mode or 1/128" fractional display.
This caliper offers IP54 resistance protection against dust splash water and oil.
Features:
- Easy read SUPER LARGE display (2-3/8"x7/8")
- IP54 - Splash water, oil and dust resistant
- Hardened stainless steel
- Precision lapping finish
- Range: 0-6"
- Accuracy: 0.001"
- Repeatability: 0.0005"
- Resolution: 0.0005"/0.01mm/1/128"
2. Anytime Tools Professional Machinist Inspection Tool Set: DIAL CALIPER / MICROMETER / Stainless Steel Ruler
Feature
Quality machinist grade inspection tool setDial Caliper: Measure 0-6" @ 0.001 Graduations Shock Proof Stainless Steel Hardened
Micrometer: Measures 0-1" @ 0.0001 Graduations Carbide Tipped Anvil
Ruler: Measures 0-6" Stainless Steel Hardened
Molded case
Description
Precision Inspection Set
The 3 most commonly machinist inspection tools in one great package. 6" Stainless Steel Caliper Features fully hardened frame and satin chrome finish, 1" Outside Micrometer with carbide tipped anvils and ratchet stop 0-1 in. (.0001 Grad) and 6" Stainless Steel Rule all Fitted in a plastic box.
Features:
- Dial Caliper
- Measure 0-6" @ 0.001 Graduations
- Shock Proof
- Stainless Steel Hardened
- Micrometer
- Measures 0-1" @ 0.0001 Graduations
- Carbide Tipped Anvil
- Ruler
- Measures 0-6"
- Stainless Steel Hardened
3. INSIZE 5013-E Measuring Tool Set, 13 Piece
Feature
Includes: 1) electronic caliper, range 0-6"/0-150mm, resolution 0005" 0/01Mm (part no. 1108-150)2) outside micrometer, range 0-1", graduation 0001" (part no. 3202-1). 3) dial indicator, range 1", graduation 001" (part no. 2307-1)
4) magnetic stand (part no. 6201-60). 5) protractor, range 0-180, graduation 1 (part no. 4799-180). 6) pitch gauge, range 4-42tpi, 30Pcs, unified 60
7) radius gauge, range 1/32"-1/4". 8) feeler gauge, range 0015"- 035" 9) 90 beveled edge square
10) scriber. 11) steel rule,6 inch
Description
13-Piece measuring tool set.4. Fowler 52-432-469 Machinist Hardened Steel Square Set, 4", 6", 9", 12" Blade Size
Feature
1 year warranty offered by Fowler PrecisionMade of hardened steel, these economy squares have true right angles both inside and outside
Beams and blades ground and lapped for straightness and parallelism
Length of hardened blade is measured from inner edge of beam to end of blades
Beam grooved at inner corner for clearance of burrs and dirt
Squareness of the blade edge to the working face of the stock is 0.0008" for 4" and 6" models, and 0.001" for 9" and 12" models
Description
The Fowler 52-432-469-0 Machinist Hardened Steel Square 4 Piece Set is designed for schools, apprenticeships and training programs. The squareness of the blade edge to the working face of the stock is 0.0008" for 4" and 6" models, and 0.001" for 9" and 12" models. The length of hardened blade is measured from inner edge of beam to end of blades. Made of high carbon steel, these squares have true right angles both inside and outside. Beams and blades ground and lapped for straightness and parallelism. Beam grooved at inner corners for clearance of burrs and dirt. This product has a 1 year warranty offered by Fowler Precision. If you experience any problem contact Fowler directly for warranty claims. Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages and digital scales. The company founded in 1946, is headquartered in Newton, MA.5. PRECISION MACHINIST SET TTC
Feature
Provided in fitted mahogany caseDescription
6" Dial Caliper Graduation: .001" Revolution: .100" 0~1" Micrometer Graduation: .0001" Carbide tipped measuring faces. Machinist Square 4" x 6" hardened steel square. 0~.030" Dial Test Indicator Set Length: .6754" Supplied with (2) stems 1/4" & 3/8". Graduation: .0005" Dial size: 1.063" Machinist Scriber (1) Straight & (1) hook point. Edge Finder Double head (.500" x .200"). Center Gage 60 US standard. 6" Flexible Rule Graduation: 16R Satin-chrome finish. Includes (1) 6" dial caliper. (1) 0~1" micrometer. (1) Machinist square. (1) Dial test indicator set. (1) Machinist scriber. (1) 6" flexible rule. (1) Edge finder. (1) Center gage. (1) Fitted mahogany case.6. RamPro Portable Multi-Position Dial Indicator Point Precision Inspection Set with Adjustable Magnetic Base - Stand Combo Kit | On/Off Magnet Switch
Feature
The Ram-Pro Magnetic Base Dial Indicator All-in-one Set provides Precision Measurements and includes a Heavy-Duty Mounting Base with On/Off Switchable Magnetic Force for accuracy improvement.SPECS: Tool Base: 2" Width X 2-1/2" Depth - 9" H overall with 6-1/2" Control Arm - Base Clamps to surface with up to 50-lb of magnetic pull force - 1" Dial Indicator - 3/8" Stem Diameter - 2" Dial Face and Lug Back.
QUALITY: The Gauge can be lowered as low as to be able to zero it at the same surface as the base - Measures up to 1,000's of an inch - The Base Positions the probe correctly and results in accurate measurements.
DESIGN: On/Off Switch for easy mobility - Polished Chrome Control Arm - Infinitely adjustable for exact pinpoint alignment - The arm has an upright post swivel to help with Pivoting - Dial indicator gauge has a white clear face and has a nut on the side to adjust and re-zero it - Completed with a custom-fit hard protective plastic case.
USES: Great for Precision measuring, set-up and inspection instrument for machinists, manufacturers, maintenance shops, upsetting Table Saw, Router and a lot of Automotive Parts.
Description
About The Ram-Pro Portable Dial Indicator with Fine Adjustment Magnetic Base Measuring Set. Extreme Magnet:The Extreme Magnet Base has 50-lb force for firm placement. On/Off Switch:
Turning ON, the magnet will pull extremely hard, turning OFF it will be like no magnet. Mountable Anywhere:
The Base bottom is not flat it has an angle in from each side leading to a flat center so it sticks to your strut pretty well - You can always unscrew the magnetic base and clamp the bar to whatever you want. Very Accurate:
The Dial Indicator is extremely precise and when attached to this Powerful Magnetic Base it will keep your works and measurements in a perfect alignment and 100% accurate. Extra Joint:
The Arm has an extra joint to help with pivoting right and left while the rest of the arm is straight. Long Arms:
The Polished chrome 6-1/2" and 6" Control Arms will help you Inspect anywhere you need. Thumb Screw:
The Knurled thumb screws provide a positive and sure grip while opening/closing. Re-Zero Nut:
The Dial Indicator Gauge has a special nut on the side to adjust and re-zero it easily. Protective Case:
The hard custom-fit plastic case is made to store it safely when not in use. Tip:
How you position the probe will directly relate to how accurate your measurements will be. Use for:
Precision measuring
Inspection Instrument
Manufacturing Machinists
Do It Yourselfer's
Upsetting Table Saw, Router, drill press
Motorcycle Wheels/Gears
Backlash on a Differential
Traveling Technicians Precision measurements and set-ups have never been so easy!
7. 3 Pc Machinist Inspection Tool Kit : 6'' Shockproof Dial Caliper , 0.0001 Micrometer, 6" Ruler
Feature
3 Piece Set6" Stainless Steel Caliper ; 0.001 Graduation
0-1" Micrometer; Carbide tipped Anvil: 0.004mm
6" Flex Ruler : mm, inch
Case Overall dimension: 12''L x 4''W x 1.25''H
Description
Here's A Reliable 6" Stainless Steel Caliper With A 0.001" Increment Dial, 0-1" Micrometer That Is Divided To 0.025" Increment Meter On The Rod Or Even More Finely Divides 0.1" Into 25 With The Turning Knob (0.004"), And A 6" Micro-ruler With 64th Increment In A Handy Carrying Red Plastic Case. Case Measures 11" X 5" X 1.5". * 3 Piece Set * 6" Stainless Steel Caliper ; 0.001 Graduation * 0-1" Micrometer; Carbide tipped Anvil: 0.004mm * 6" Flex Ruler : mm, inch * Case Overall dimension: 12''L x 4''W x 1.25''H BLACK FRIDAY Specials -Cyber Monday & Holiday Deal8. Kinex 4 Piece Set of Solid Machinist Square 2-3/8", 3", 4" and 6" (60, 75, 100 and 150 mm) DIN 875/1 (Square w/in 18 microns or 0.0007) 4026-12-4PC Set
Feature
4 piece set includes 2-3/8, 3", 4" and 6" squaresSquares adheres to strict German DIN 875/1 accuracy standards- squareness guaranteed to w/in 18 microns or 0.0007" (that's seven ten thousandths of an inch!)
Base and blade riveted together with 2 pins producing a strong and invisible joint
Bases are .600" to .980" tall by .380" thick; blades are .600" to .780" wide by .150" thick
Made by Kinex Measuring
Description
This is a 4 piece set of precision machinist square made by Kinex Measuring who has been in the business of making quality and accurate measuring tool since 1906. The set included a 2-3/8", 3" 4" and 6" square. These squares are perfect for the professional machinist, meticulous wood worker, or DIY perfectionist. Each square is made from 2 pieces of tool steel. The bases and blades are riveted together with 2 pins producing a strong and invisible joint. All faces and edges are ground and lapped for straightness and parallelism. Manufactured to strict German DIN 875/1 standards and guaranteed square to within 18 microns or 0.0007 inches (that's seven ten-thousandths of an inch). Comes in a padded box. Includes signed inspection certificate.9. 6 PC Machinist Starter Kit Micrometer Magnetic Base Dial Indicator Caliper
Feature
6 PC Machinist Starter KitConsists of:6'' Shockproof dial caliper with t-bar ; 0-1'' Precision micrometer
0-1'' Dial indicator with magnetic base with 22 point set
Case INCLUDED; Case overall dimension: 13''L x 17''W x 2-1/2''H
Quantity: 1 set ; Weight: 7 LBS
Description
-0-1'' Dial indicator with magnetic base with 22 point set specs:
Easy to read 2-1/4'' (2-1/8'' is overall) white face with black markings
Graduations: 001'' per line, 0.1'' per revolution
Range 0-0.03" x .0005" Graduation, 0-15-0 Reading
Includes a padded case and 2 stems- 7/32" & 1/4"
Dovetail mounting on top, back, and front
-7" Center Post and 6" Swing Arm, Diameter of Post is 1/2"
On/Off Switch
0 - 100 Dial Reading with Revolution Counter
Easy to read aluminum dial face with anti-glare finish
Durable satin chrome finish
Spindle rack pinions and gear trains are made of high quality steel components -ensuring long life
Vertical lug back configuration
Fine Adjustment
V-Groove base allows mounting it on cylindrical surfaces
Point Set: Choose the right end for your indicator to fit the surface from this -22 pc set.
22 pc Popular assorted points in handy storage case
This item features magnetic base, upright post swivel, upright post, swivel snug, gauge rod, and indicator clamp.
-6'' Shockproof dial caliper with t-bar specs:
Graduation: .001"
Range Rev. .100"
Accuracy: +/- .001"
6'' dial face: 1-1/2''
Measuring faces hardened, ground and lapped
Satin chrome finish, no glare
Large Dial face for easy reading
Hardened stainless steel throughout
-0-1'' Precision micrometer specs:
Range: 0-1" range
Graduation: .0001"
Accuracy: .00016"/0.004mm
10. PRECISE 2 Pc Machinist Inspection Tool Kit : 6'' IP54 Digital Caliper ,0.01"-0.0005" Electronic Micrometer: TM-05331
Feature
2 Essential Measuring ToolsIP54 Splash Water, Oil and Dust Resistant
0.01"-0.0005" 1 Key Electronic Micrometer
Both Have Large Lcd Display ; Inch, mm, ABS
Custom Fitted Case 10.5" L X 5" W X 1.25" H
