Finding the best hydraulic puller suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best hydraulic puller
1. Shankly 50 Piece Seal Drive Set, Bushing Removal Tool, Bushing Driver Set
Feature
THE RIGHT SIZE: The Shankly bushing removal tool kit allows you to build your own custom bushing driver so you always have the right size for the job.COMPLETE SET: The discs go from 18mm (.7 inches) all the way to 65mm (2.51 inches) in 1mm increments plus 74mm (2.91 inches). All discs are connected with a 12mm (.47 inches) shaft and screw which quickly connects to a 180mm (7.08 inch) handle. Making the Shankly wheel bearing driver set complete and effective.
INTERCHANGEABLE: All 50 pieces are interchangeable with each other so you get different sized variations in one set, allowing the mechanic to complete the job quickly, professionally and promptly. Complete set details in description below.
IMPRESSIVE VARIATIONS: The Shankly bearing and seal driver set has 50 interchangeable discs, giving the user an amazing 2,450 different variations due to each of the 50 discs being interchangeable with each other.
HEAVY DUTY, ORGANIZED CASE: Set comes in a heavy duty, blow molded case with compartments for every piece, making storage and transport easy and manageable.
Description
The Shankly bushing removal tool kit allows you to build your own custom bushing driver so you always have the right size for the job. The Shankly bushing removal tool kit allows you to build your own custom bushing driver so you always have the right size for the job. The discs go from 18mm (.7 inches) all the way to 65mm (2.51 inches) in 1mm increments plus 74mm (2.91 inches). All discs are connected with a 12mm (.47 inches) shaft and screw which quickly connects to a 180mm (7.08 inch) handle. Making the Shankly wheel bearing driver set complete and effective. All 50 pieces are interchangeable with each other so you get different sized variations in one set, allowing the mechanic to complete the job quickly, professionally and promptly. The Shankly bearing and seal driver set has 50 interchangeable discs, giving the user an amazing 2,450 different variations due to each of the 50 discs being interchangeable with each other. Set comes in a heavy duty, blow molded case with compartments for every piece, making storage and transport easy and manageable.
Bushing Driver Set consists of the following sizes:
18mm, 25/32'; 43mm, 1-11/16"; 19mm, 3/4'; 44mm, 1-23/32"; 20mm, 25/32"; 45mm, 1-25/32"; 21mm, 27/32; 46mm, 1-13/16"; 22mm, 7/8"; 47mm, 1-27/32"; 23mm, 29/32"' 48mm, 1-15/16"; 24mm, 15/16"; 49mm, 1-31/32"; 25mm, 1"; 50mm, 2"; 26mm, 1-1/16"; 51mm, 2-1/32"; 27mm, 1-1/16"; 52mm, 2-1/16"; 28mm, 1-3/32"; 53mm, 2-1/8"; 29mm, 1-5/32"; 54mm, 2-3/32"; 30mm, 1-3/16"; 55mm, 2-5/32"; 31mm, 1-7/32"; 56mm, 2-7/32"; 32mm, 1-1/4"; 57mm, 2-1/4"; 33mm, 1-9/32"; 58mm, 2-9/32"; 34mm, 1-11/32"; 59mm, 2-11/32" ; 35mm, 1-3/8"; 60mm, 2-3/8"; 36mm, 1-13/32"; 61mm, 2-13/32"; 37mm, 1-15/32" ; 62mm, 2-7/16"; 38mm, 1-1/2"; 63mm, 2-1/2"; 39mm, 1-17/32"; 64mm, 2-17/32"; 40mm, 1-19/32" ; 65mm, 2-9/16"; 41mm, 1-.5/8"; 74mm, 2-29/32"; 42mm, 1-21/32". All pieces come in a heavy duty blow molded case with compartments for every piece.
2. Yescom 10 Ton Hydraulic Gear Puller Wheel Bearing Pulling Separator 3 in 1 Pump Oil Tube Drawing Machine w/Case
Feature
Max Capacity: 10T; Ares Travel: 2"(50mm)Min/Max Reach: 0-6"(0-160mm); Min/Max Spread: 4"-10"(100-250mm)
Suitable for pulling hubs, flanges, gears, bearings and more
3 in 1 - integrates pumps, oil tube and drawing machine
Pump head can be turned by 360for flexibility
Description
Features:- Suitable for pulling hubs, flanges, gears, bearings and more
- 3 in 1 - integrates pumps, oil tube and drawing machine
- Pump head can be turned by 360 for flexibility
- Could exchange 2 or 3 jaws freely for different use
- Safety flooding valve to avoid overloading
- Control switch for oil pressure
Specification:
- Material: 45# Steel
- Max Capacity: 10T
- Ares Travel: 2"(50mm)
- Min/Max Reach: 0-6"(0-160mm)
- Min/Max Spread: 4"-10"(100-250mm)
- Weight: 22Lbs
- Overall Dimension: 16.5"x8.7"x22.4"
Package Content:
- 1x Hydraulic Puller
- 1x Handle
- 1x 2/3 Leg Puller Yoke
- 3x Jaws
- 6x Link Plates
- 1x Nose Adaptor
- 6 Sets of Nuts and Bolts
- 1x Carrying Case
- 1x Manual
3. Yescom 15 Ton Hydraulic Gear Puller Wheel Bearing Pulling Separator 3 in 1 Pump Oil Tube Drawing Machine w/Case
Feature
Max Capacity: 15T; Ares Travel: 2"(50mm)Min/Max Reach: 0-7"(0-180mm); Min/Max Spread: 4"-12"(100-300mm)
Suitable for pulling hubs, flanges, gears, bearings and more
3 in 1 - integrates pumps, oil tube and drawing machine
Pump head can be turned by 360 for flexibility
Description
Features:- Suitable for pulling hubs, flanges, gears, bearings and more
- 3 in 1 - integrates pumps, oil tube and drawing machine
- Pump head can be turned by 360 for flexibility
- Could exchange 2 or 3 jaws freely for different use
- Safety flooding valve to avoid overloading
- Control switch for oil pressure
Specification:
- Material: 45# Steel
- Max Capacity: 15T
- Ares Travel: 2"(50mm)
- Min/Max Reach: 0-7"(0-180mm)
- Min/Max Spread: 4"-12"(100-300mm)
- Weight: 26Lbs
- Overall Dimension: 16.5"x18.5"x20.9"
Package Content:
- 1x Hydraulic Puller
- 1x Handle
- 1x 2/3 Leg Puller Yoke
- 3x Jaws
- 6x Link Plates
- 1x Nose Adaptor
- 6 Sets of Nuts and Bolts
- 1x Carrying Case
- 1x Manual
4. Hydraulic Gear Puller Bearing Wheel Pulling 2 or 3 Jaws set (30 tons) L-30
Feature
Rated output=30 tonsMax stroke=3"
Spread Interval=6"-16"
Description
Hydraulic gear puller with the rated output of 30 tons. An intergrated design and able to fit the tool in any durable carrying cases.5. Shankly 10 Ton Hydraulic Puller, Powerful 3-Jaw Gear Puller (and 2 Jaws)
Feature
POWERFUL PULLER SOLUTION: Effective bearing puller and gear puller. Extracts with minimal effort by use of the hydraulic puller.ADAPTABLE: Six position multi-function puller with adjustable two or three leg function giving the mechanic an effective puller tool for various job types.
HANDY STORAGE: The blow-molded storage case is well designed for a long life in daily use and for easy transportation
TOOL SET CONTENTS: Shankly's hydraulic puller set includes, hydraulic pump, 3 puller legs, 6 nuts and washers, 6 link plates, leg puller yoke, nose adapter, Min/Max Reach 0 - 150mm, Min/Max Spread 100 - 240mm, screw rod: SAE 1045, bearing: SAE 5140.
ONE PULLER SET, MANY JOBS: Shankly's heavy duty 3-jaw gear puller is remarkably versatile, perfect for automotive mechanical installation, extraction and even railway vehicle maintenance. Removes pulley, bearings, gears and other components.
Description
Effective bearing puller and gear puller. Extracts with minimal effort by use of the hydraulic puller. Six position multi-function puller with adjustable two or three leg function giving the mechanic an effective puller tool for various job types.
The blow-molded storage case is well designed for a long life in daily use and for easy transportation. Shankly's hydraulic puller set includes, hydraulic pump, 3 puller legs, 6 nuts and washers, 6 link plates, leg puller yoke, nose adapter, Min/Max Reach 0 - 150mm, Min/Max Spread 100 - 240mm, screw rod: SAE 1045, bearing: SAE 5140.
Shankly's heavy duty 3-jaw gear puller is remarkably versatile, perfect for automotive mechanical installation, extraction and even railway vehicle maintenance. Removes pulley, bearings, gears and other components.
6. Sunex 3909 10-Ton Hydraulic Gear Puller
Feature
CR-MO alloy steel jaws for greater strength and performanceProvides up to 10 tons of pulling force with hydraulic ram
Makes 8 different pulling combinations for total versatility
Blow mold case for ease of transportation
Pulling Force (Tons) 10
Description
This 10-Ton capacity hydraulic gear puller seat provides up to 10-Tons of pulling force with hydraulic ram and makes 8 different pulling combinations for total versatility.7. Posi Lock 110 Manual Puller, 3 Jaws, 20 tons Capacity, 9-2/3" Reach, 1" - 15" Spread Range, 20-2/5" Overall Length
Feature
Manual puller with three jaws for extraction of most shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleysThree-jaw construction ensures equal load distribution, secure hold, and concentric pulling action
Forged steel jaws for increased strength over investment casting
20-ton pulling capacity, 9.67" (246mm) reach and a spread range of 1 to 15 inches (25 to 381 mm) for increased pulling leverage
Tapered jaws for better access in tight spaces
Description
This Posi Lock 110 manual puller has a 20-ton pulling capacity; has three jaws for equal load distribution, secure hold, and concentric pulling action; and is suitable for extracting shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys. Its jaws are made of forged steel for increased strength over investment casting, and are tapered for better access in tight spaces. The center bolt has a 0.75" (19 mm) diameter. The diameter of the center bolt must be at least half the diameter of the shaft along which the object is pulled. This puller has a 9.67" (246 mm) reach and a spread range of 1 to 15 inches (25 to 381 mm) for increased pulling leverage. This manual puller is suitable for extracting shaft-fitted parts in a range of industries, including automotive, HVAC, wind power, and others.
| Specifications | |
|---|---|
| Puller | 3-jaw |
| Pulling capacity | 20 tons |
| Center bolt diameter | 0.75" (19 mm) |
| Reach | 9.67" (246 mm) |
| Spread range | 1 to 15 inches (25 to 381 mm) |
| Maximum torque | 275 ft-lb. (372 N-m) |
| Hex socket size | 1" (25.4 mm) |
| Overall length | 20.41" (518.4 mm) |
| Jaw width | 1" (25.4 mm) |
| Weight | 16 lb. (7.3 kg) |
Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main partsthe center bolt, gripping jaws, and T-handleand can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.
Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND.
8. 10 Ton 3 Jaw Hydraulic Gear Puller, Wheel Bearing Hub Removal Tool with Work Gloves and Storage Box
Feature
Handle Size: 15" / Max Pulling Force: 20,000 Lbs / Max Spread: 10" / Max Reach: 6"Reversible jaws for pulling inside or outside. Use with 2 or 3 Jaws. Pump head can be rotated 360, providing flexibility to use the puller in its most convenient position.
Compact design with a self contained, portable hydraulic pump and puller saves space, as you don't need a separate pump, hose or puller.
Includes grip handle, storage case and work gloves. Wear safety goggles during use.
The Chromex Tools Hydraulic Gear Puller is made of high quality, forged steel components that provide superior reliability and service Suitable for pulling hubs, flanges, gears, pulleys, flywheels, bearings and chucks from shafts.
Description
The Chromex Tools Hydraulic Gear Puller is designed to pull items such as bearings, pulleys, and chucks from shafts. It can be used with 2 or 3 legs. The jaws can grip the object from the inside or outside, whichever offers a better grip. The piston will push on the central shaft while the jaws pull away. This will remove the item from the shaft by pulling it straight out evenly, without hammering or binding from pulling at an angle.Specifications:
Handle Size: 15"
Max Pulling Force: 10 Tons (0,000 Lbs.)
Maximum horizontal spread: 250mm
Max vertical reach: 160mm
Max Stroke: 60mm
Package Contents
1 Hydraulic Pump
1 Puller Sleeve
1 Handle
3 Jaws
6 Bolt/Washer/Nut sets
6 Connector Plates
Work Gloves
Storage Box
9. Yescom 5 Ton Hydraulic Gear Puller Bearing Wheel Pulling 3in1 Pumps Oil Tube Drawing Machine w/Case
Feature
45# Steel new type of hydraulic gear puller is convenient for operatingMax Capacity: 5T, Ares Travel: 50mm
Min/Max Reach: 0 - 140mm, Min/Max Spread: 100 - 200mm
Pumps, oil tube, drawing machine 3in1
Workers can exchange two jaws or three jaws freely when working
Description
Features:- Suitable for pulling hubs, flanges, gears and bearings.
- The pump of handle can be opened up
- Pump head can be turned by 360
- Safety flooding valve to avoid overloading
- Control switch for oil pressure
- Use the stronger alloy steel for jaws seat
- Can be touched working center quickly after rotary according to the distance between puller and positon center
- It can choose pump freely
- The jaws with three can be adjusted from high to low point
- They are indispensable tools for agriculture, machine, garage, Industry use
- Great for agriculture, machine, garage, Industry use
Specifications:
- Material: 45# Steel
- Max Capacity: 5T
- Ares Travel: 50mm
- Min/Max Reach: 0 - 140mm
- Min/Max Spread: 100 - 200mm
Package Contents:
- 1x Hydraulic Pump
- 1x Handle
- 1x 2/3 Leg Puller Yoke
- 3x Puller Legs
- 6x Nuts and Bolts
- 6x Link Plates
- 1x Nose Adaptor
- 1x Carrying Case
- 1x Manual
10. 5 Ton 3 Jaw Hydraulic Gear Puller, Wheel Bearing Hub Removal Tool with Work Gloves and Storage Box
Feature
The Chromex Tools Hydraulic Gear Puller is made of high quality, forged steel components that provide superior reliability and service Suitable for pulling hubs, flanges, gears, pulleys, flywheels, bearings and chucks from shafts.Reversible jaws for pulling inside or outside. Use with 2 or 3 Jaws. Pump head can be rotated 360.
Compact design with a self contained, portable hydraulic pump and puller saves space, as you don't need a separate pump, hose or puller.
Handle Size: 15" Max Pulling Force - 5 Tons (10,000 Lbs.)
Includes grip handle, storage case and work gloves. Wear safety goggles during use.
Description
The Chromex Tools Hydraulic Gear Puller is designed to pull items such as bearings, bushings, wheels, gears, pulleys, and chucks from shafts. The jaws can grip the object from the inside or outside, whichever offers a better grip. The piston will push on the central shaft while the jaws pull away. This will remove the item from the shaft by pulling it straight out evenly, without hammering or binding from pulling at an angle.Specifications:
Handle Size: 15"
Max Pulling Force: 5 Tons (10,000 Lbs.)
Maximum horizontal spread: 200mm
Max vertical reach: 140mm
Max Stroke: 50mm
Package Contents
1 Hydraulic Pump
1 Puller Sleeve
1 Handle
3 Jaws
6 Bolt/Washer/Nut sets
6 Connector Plates
Work Gloves
Storage Box
