Finding the best hinges lid suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best hinges lid
1. Apexstone Soft Close Lid Support,Safety Lid Support,Soft Down Lid Support,Soft Close Lid Hinge(33 lbs),Set of 2
Feature
Lids lower gently,Ideal for SOFT CLOSING lid to prevent from slamming so that it won't smash kid's fingersForce:33 Lbs(150 N),Length (Center-to-Center): 8.7 Inch(220 mm),Extended Length (Center-to-Center):14.2 Inch(360 mm)
SOFT DOWN the door/lid which the SIDE LENGTH is between 10 and 30 Inch, the WEIGHT is between 10 and 30 Lbs
As the Installation,the measurements are 3 1/2 Inch /90 mm from the back of the lid, 7 5/8 Inch/195 mm from the back of the cabinet, and 8 5/8 inch/220 mm from the bottom of the cabinet. While if unfortunately you feel it's too weak,you can move the mounting point on the lid 20 mm(0.79 inch) towards the opposite direction of the hinges, OR you can move it on the cabinet 20 mm(0.79 inch) towards the back of the cabinet
We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our SOFT DOWN LID GAS STRUT did not work well ,please kindly contact us for exchange, refund or return
Description
Perfect for various box/toy chest/toy box to prevent from smashing hands. when you install it , the lid will lower gently--never smashing child's fingers2. Douper Lid Stay Tension Adjustable Lid Support Hinge for Top-Upward Opening Kitchen Cabinets Maximum Bearing Capacity 40lbs/2pcs
Feature
Made of durbale Zinc alloy in Satin Nickel, quality assuranceSuitable for lids or flaps when a soft closing motion is required, holds the door in any open position or lets it slide down gently
Each Lid Stay can be used for Right or Left Hand Mounting, bychanging the installation size on turn over the door opening angle can be adjusted in the largest 7590 and 100 (or 105)position
Fully adjustable for different(Max 40lbs/2pcs)weights by turning a screw at the middle of the arm to setup correct friction pressure
Quality product, screws and install instructions included
Description
Package includes-2 x Lid hinges, 1 x douper(R)Install instruction, 1 x douper(R) logoed bag.
PS:Please feel free to contact us if you have any problems of installation.
Dimensions-
Overall Length: 8.5inch.
Diameter: 1-3/5inch.
Length of leg: 4inch.
Weight: 12oz/2pcs
3. Douper 200N/44lb Heavy Duty Gas Springs Lid Support Hinge with Soft Close Support Heavy Drop Lids and Work Perfectly for a Soft Close Pack of 2
Feature
Made of durable cold-rolled steel in Satin Nickel, quality assurancePressure: 200N/44lb (Per Strut), Max Weight Support--50lb/2pcs
Most recommended weight of your LID: 40lb-50lb,and have a 9 inch clearance.(Douper gas springs will fit almost all of the lids of box when a stay and soft close is needed only if the weight of your lid is between 40lb-50lb, and have a 9 inch clearance.)
Heavy duty hinge- 200N, Designed to support heavy drop lids of chest, toy box, heavy bench lid, etc, work perfectly for a soft close
Quality product, Comes with 2 pack, screws included for installation
Description
Overall Length: 11-3/5".Please see the left picture to know the size informaiton and how to install.
This is a 200N (support 50lb/2pcs ) heavy duty lid support hinge, suits heavy lids of cabinets, TATAMI, or other lids of desks.
Package includes: 2 x Lid hinge(Screws included).
--Important Notice, Please Read---
Other seller is selling fake "douper" by low price, we are the "douper" brand owner, and we never authorize them to sell our products.
We received many customer complaints against other sellers for Poor Quality.
If you purchase here and receive from other seller, please report to Amazon for item not as described and claim for sell fake products and Get FULL REFUND.
4. 2 Pack Folding Support Hinge Lid Stay with Soft Close for kicthen Cabinet Door Box for kicthen Cabinet Door
Feature
Made of Zinc Alloy,not easy to rust,durable and anti-corrosion.Make the lid can be stopped in any degrees,bring great convenience to daily life.
Opening angle: upward door open adjustable angle of 75,90,110.
Designed for support on drop lids of desks, cabinets, keeping the lid up, it is self-adjustable, easy to use.
Fully adjustable for different weights by turning a screw at the middle of the arm to setup correct friction pressure.
Description
Easy to install, Easy to use!Each Lid Stay can be used for right or left-Hand Mounting.
Holds the door in any open position or lets it slide down gently.
Generally suit for many kinds of downward and upward ,high position hanging cabinet.
Specification
Material:Zinc Alloy;
Package Include:
1 Pack of 2 cabinet hinges (Includes screws,connect metal parts and hexagonal wrench)
Note:
Pay attention to the size of the product,the small cupboard door does not apply.
5. IRIS 138 Quart Store-It-All Storage Trunk, 3 Pack,Clear
Feature
3 Pack Set138 Quart (34.5 Gallon) capacity
Dimensions: 18.25"L x 30.88"W x 19.25"H
Domed lid provides extra space for bulky items and lockable for extra security
Made in the USA
Description
This set of three Hinged-Lid Utility Trunks by IRIS USA, Inc. is perfect for organizing clutter in your garage, shed, attic, and basement. Keep your valuables secure with a padlock or zip tie. The domed lid allows extra storage space for bulky items such as basketballs and soccer balls, sleeping bags, blankets, and much more!6. 60 inch-pound Lid-Stay Torsion Hinge, Rustic Bronze, 2 per Pack
7. Lid Support Hinge Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Kitchen Support 40lb/2pcs
Feature
DURABLE HIGH QULITY LID SUPPORT HINGE--Made of Zinc ally in Satin Nickel, Lid support can be mounted for flap support or bar counter function.MULTIANGLE ADJUSTMENT---Every Lid support can be adjusted in largest 7590 and 100 and used for Right or Left Hand mounting
MAX WEIGHT--40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side.
WIDE USAGE--Perfect as toy box hinges, Lid stay support good for kitchen cabinet door
EASY TO INSTALL INSTUCTION DOWNLOADED BELOW TECHNICAL SPECIFICATION--Screws included for installation. Detail technical data in different angle different method in user manual, it can be downloaded below technical specification.
Description
HOW TO INSTALL LID SUPPORT HINGE?-There are two mounting pieces: one side-mounting piece (A) for the inside wall of your cabinet and the other a top-mounting piece (B) for the inside of your cabinet door. (Hint: the arm of piece A is longer than the arm of piece/
HOW TO INSTALL LID STAY INSTALL WHEN YOUR DOOR OVERLAPS THE CABINET FRAME (OVERLAY STYLE)
-On the inside cabinet wall, mark two points for drilling holes: one 38mm in from the front edge of the cabinet and 160 mm down from the inside top of your cabinet, and the second exactly 32mm below first one.
-Measure the amount of overlap for your cabinet door in millimeters. If installing 2 hinges, note that it may be different each side. Take that overlap dimension and add 12 to get inset dimension X. On the inside of the door, mark two points for drilling holes: one Xmm in from the side edge and 90mm from the top edge and another Xmm x 122mm.
HOW TO INSTALL LID SUPPORT HINGE WHEN YOUR DOOR IS SET INSIDE THE CABINET FRAME (FLUSH MOUNT STYLE
-Measure the thickness of your cabinet door in millimeters. Add 38 to it to get inset dimension X. On the inside cabinet wall, mark two points for drilling holes: one Xmm in from the front edge of the cabinet and 160 mm down from the inside top of your cabinet, and the second 32mm below the first one.
-Mark two points for drilling holes inside of the door,: one 12mm in from the side edge and 90mm from the top edge and another 12mm x 122mm.
NOTES FOR EITHER STYLE OF CABINET:
-Drill 1/8" pilot holes for all four points, being careful not to drill too deeply so that don't drill clean through the door or cabinet wall.
-Screw each mounting bracket into its respective place. The one on the inside cabinet wall should be oriented so that it protrudes out toward the door. The one on the inside of the door should be oriented so that the screws are toward the inside of the cabinet.
8. Sugatsune Lid Stay 105 Degree Open with Soft Close, Umber, 2 Pack
Feature
Package of 2 lids stays with instructions.Lids lower gently. Support opens lids to a maximum angle of 105 degrees
Ideal for installing in tight places
Nickel plated steel arms
Compact design
Description
Lids lower gently--never crushing fingers. Support opens lids to a maximum angle of 105 and is 8-7/8" long overall. They have nickel plated steel arms with cream colored plastic housing. Compact design makes these supports ideal for installing in tight places. Use one support per 43 inch/lbs. Determine inch/lbs with this formula: (lid wt. X front to back size) divided by 2. P9. Zengest Soft Close Lid Support, Safety Lid Support for Toy Box, Soft Down Lid Support, Soft Close Lid Hinge(22 lb), Pack of 2
Feature
Designed for support on drop lids of desks, cabinets, keeping the lid up, easy to usePressure:100 N/22 lb (each hinge); Travel: 5-9/10'', distance between ball mounts compressed: 8-7/10'', distance extended: 14-1/5"
Perfect for various box/toy chest/toy box to prevent from smashing hands
Package included: 2 X Soft Close Lid Strut and 10 X Screws
Description
Package includes: 2 x Lid Hinge 10 x screw Features Easy to install, easy to use Each Lid Stay can be used for Right or Left Hand Mounting. Suitable for holding lid support or cabinet door stop. Holds the door in any open position or lets it slide down gently. Can hold door weights of up to 20kg - Pair of Lid Stays (up to 10kg/1 hinge). Net weight: 168g/pcs. Material: Zinc alloy in chrome plated.10. Zengest Folding Lid Support Hinge Damper Buffer Soft Close Kit Maximum Open Angle 110 Degree(Pack of 2)
Feature
Designed for support on drop lids of desks, cabinets, keeping the lid up, it is self-adjustable, easy to useFully adjustable for different weights by turning a screw in the middle of the arm to setup correct friction pressure
Lid can be stopped in any degrees
Made of durable Zinc Alloy
Double-arm folding support can be used on drop lids of desks and cabinets
Description
Package Includes
2 x Lid Hinge
2 x wrench
12 x screw
Features
Easy to install, easy to use
Each Lid Stay can be used for right or left-Hand Mounting.
Suitable for holding lid support or cabinet door stop.
Holds the door in any open position or lets it slide down gently.
Can hold door weights of up to20kg - Pair of Lid Stays (up to 10kg/1 hinge).
Fully adjustable for different weights by turning a screw in the middle of the arm to setup correct friction pressure.
Net weight: 168g/pcs.
Material: Zinc alloy in chrome plated.
