When you want to find flex foam, you may need to consider between many choices. Finding the best flex foam is not an easy task. In this post, we create a very short list about top 10 the best flex foam for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 flex foam:
Best flex foam
1. Flex Foam-iT! III Flexible Polyurethane Foam - Trial Unit
Feature
Cures to a soft white foam in 2 hoursSuitable for propmaking and special effects
15 times expansion
1:2 by volume mix ratio
WARNING: Keep Out of Reach of Children. Do not get into eyes or on skin. Do not take internally. Do not breathe fumes. Use only with adequate ventilation. Wear vinyl or nitrile gloves and eye protection when handling this product. Review the technical bulletin prior to use for safe handling instruction.
Description
WARNING: Keep Out of Reach of Children. Do not get into eyes or on skin. Do not take internally. Do not breathe fumes. Use only with adequate ventilation. Wear vinyl or nitrile gloves and eye protection when handling this product. Review the technical bulletin prior to use for safe handling instruction. FlexFoam-iT! expanding flexible foams are easy to use and durable. They are lightweight, versatile and most are available in easy to measure mix ratios. They can be used for padding/cushion material, gasket material, or to make props and special effects. Vibrant colors can be achieved by adding color pigments.2. Smooth Cast 65D Liquid Plastic Casting Resin - Trial Unit
Feature
unique gradual cure profile that makes it ideal for rotational casting applications ("roto-cast") in a machine or by hand.Low-cost semi-rigid urethane casting resin
Low viscosity for minimal bubble entrapment
Semi-rigid plastic has good impact and abrasion resistance
Vibrant colors are possible by adding SO-Strong color tints or Ignite color pigments.
Description
Smooth-Cast 65D (Formerly Smooth-Cast ROTO) has a unique gradual cure profile that makes it ideal for rotational casting applications.Castings will be hollow and lightweight but have the appearance of being solid, allowing you to use less material to attain the same finished look (substantially lowering your material costs). Fully cured castings are semi-rigid and exhibit good impact resistance. Castings resist moisture and mild solvents and can be machined, sanded and painted. 65D can also be cast solid for a variety of industrial and art-related applications. MIX RATIO:1:1 by volume: POT LIFE: 2.5 minute; DEMOLD TIME:10-15 minutes; Mixed viscocity 2400 cps: SHORE HARDNESS" 65D COLOR: WHITE Read MSDS before use - for more information visit www.smooth-on.com3. Smooth-Cast 300 Liquid Plastic Compound - Trial Unit
Feature
Ultra-low viscosity casting resin with bright white colorVacuum degassing is not necessary to yield castings that are virtually bubble free.
Pot Life: 3 minutes; Cure Time: 10 minutes
Shore 70D
Mix Ratio: 1A: 1B by Volume
Description
Smooth Cast 300 is a liquid plastic ,ultra-low viscosity casting resin that yields castings that are bright white and virtually bubble-free. Vacuum degassing is not necessary. It offers the convenience of a one to one mix ratio (by volume). 3 minute pot life: 10 minute demold time: Mixed viscosity 80 cps: 70D shore hardness Fully cured castings are tough, durable, machinable and paintable. Read MSDS before use - Adult Supervision Required. Keep Out of the Reach of Children - for more information visit www.smooth-on.com4. Pellon FF77 Flex Foam 20" x10yd NAT
Feature
Pellon Stabilizer Flex Foam Sew In 20"x 10yd WhitePellon Stabilizers are perfect for crafts and home decor.
Flex Foam Sew In 20"x 10yd White- A unique foam stabilizer batting, laminated onto foam, ideal for bag making.
Description
Pellon Stabilizers are perfect for crafts and home decor. Flex Foam Sew In 20"x 10yd White- A unique foam stabilizer batting, laminated onto foam, ideal for bag making. It is soft, formable, easy-to-stitch, and needle friendly. This product gives stability and shape to bags so they sand up instead of slouching down over time. 100% polyester outer covering laminated to a foam center.5. Pellon Flex-Foam 1-Sided Fusible Foam Stabilizer
Feature
Contains 10 yards of 20 inch wide fusible stabilizer.Description
Pellon-Flex Foam 1 Sided Fusible Stabilizer: White. A lightweight, easy-to-handle, fusible stabilizer. It gives a great professional finish to all project types, providing stability and lasting body. This stabilizer is made of 100% Polyester fabric on the outside and 100% Polyurethane on the inside. Contains 10 yards of 20 inch wide fusible stabilizer. Made in USA.6. Always Pads Size 3 Infinity With Flex Foam 14 Count X-Heavy Flow (2 Pack)
Feature
2 Pieces -Absorbs 10X Its Weight,
With Flexfoam
Description
Absorbs 10X Its Weight, With Flexfoam7. Smooth-On Silicone Mold Making, Liquid Rubber OOMOO 30, Easy to Use - Trial Size 2.8 lb
Feature
MIX RATIO: 1A:1B BY VOLUME - Easy to use silicone rubber compound features a convenient one-to-one by volume mix ratio, no scale is necessary *Packaging may vary*SHORE A HARDNESS: 30 - This scale measures the hardness of flexible rubber molds. A 30A hardness is in the soft to medium soft range, between the flexibility of a rubber band and pencil eraser
POT LIFE: 30 MINUTES, CURE TIME: 6 HOURS - This product cures at room temperature with negligible shrinkage. Best to store at room temperature, see "For Best Results" section below
LOW VISCOSITY FOR EASY MIXING AND POURING - Great for making simple one- or two-piece block molds, no vacuum degassing is necessary
PERFECT FOR ART AND INDUSTRIAL APPLICATIONS - Often used for molds to reproduce sculptures and other prototypes, casting plaster, resins, and wax
Description
Use this silicone mold making rubber for making perfect reproductions that capture intricate detail of original models. OOMOO 30 is easy to use silicone rubber compounds that feature convenient one-to-one by volume mix ratios (no scale necessary). Very low viscosity for easy mixing and pouring and vacuum degassing is not necessary. Cures at room temperature with negligible shrinkage. OOMOO 30 has a 30-minute pot life, with a six-hour cure time.
For the novice mold maker - OOMOO30 does not have great tear strength. They are good for making simple one- or two-piece block molds. OOMOO30 is suitable for a variety of art-related and industrial applications including making molds for sculpture and prototype reproduction, casting plaster, resins and wax.
Technical Information
Mixing Ratio: one to one by volume (100a:130b by weight)
Pot Life: 30 min.
Demold: 6 hrs.
Color: lavender properties (part a and b mixed)
Viscosity: 4,250 cps g/cc: 1.34 Cu. In./Lb.: 20.6
Tensile Strength: 240 psi
Elongation at Break: 250%
Die C Tear Strength: 40 pli
Compression Set: 37%
Shrinkage: .0025 In./In.
Net weight 16 oz. (454 Grams)
For Best Results: Store and use silicone products at room temperature. If material freezes, silicone base will become very thick. Simply allow product to get down to room temperature before use. Adult Supervision Required. Keep Out of the Reach of Children
8. Pellon FF78F1R10R - Flex Foam 1 Sided Fusible Stabilizer 60"x10yd Roll
Feature
60" x 10 yard roll100% Polyester Fabric Outer/100% Polyurethane Inner
Lightweight, easy to handle and sew
1-Sided Fusible, Flexible Foam
Machine wash warm on gentle cycle, tumble dry low or dry clean.
Description
This is a lightweight one-sided fusible stabilizer consisting of a layer of foam sandwiched between two layers of soft fabric. It is excellent for use in crafts, accessories, and home dcor projects for an elegant finished look. It can be used in place of or in addition to other stabilizers. Flex-Foam is 100% sewing machine safe and adds shape and body to projects such as computer cases, eyeglass cases, purses, tote bags, cup holders, diaper bags, and more! It is compatible with a wide variety of fabrics.9. Pellon Flex-Foam 2-Sided Fusible Foam Stabilizer - Sold by the Yard - Sold By the Yard
Feature
Flex-Foam 2-Sided Fusible Stabilizer-White 20"X10yd FOB: MIDescription
Pellon-Flex Foam 2 Sided Fusible Stabilizer: White. A lightweight, easy-to-handle, fusible stabilizer. It gives a great professional finish to all project types, providing stability and lasting body. This stabilizer is made of 100% Polyester fabric on the outside and 100% Polyurethane on the inside. Contains 10 yards of 20 inch wide fusible stabilizer. Made in USA.10. Smooth-On FLEX FOAM-IT 17 Urethane Foam - 2.8 lb kit
Feature
3.5X expansionSelf Skinning
Perfect material for safe film props
