Shopping for the best disk for mounting suction cup is about as tricky as finding your soulmate. You not only think about quality, price but also need to find where to buy disk for mounting suction cup. Don’t worry any more! We spend many hours to review and compare disk for mounting suction cup to make the short list for you. Let’s check which product is suitable with you.
Best disk for mounting suction cup
1. Dashboard Pad Mounting Disk for Suction Cup Phone Mount & for Tom Tom Garmin GPS Suction Mount Sat Nav Dash Cam Holder Stick On Universal Dash Mount Pad w/3M Adhesive 70mm Diameter 3 Pcs
Feature
To provide smooth, glass-like surfaces for pedestals of suction cup car mounts to work more effectively.3M PE foam adhesive at the bottom can be fixed on textured surfaces.
Has a diameter of around 2.76 inches, applicable to most suction cup GPS/mobile holders on the market.
No tools required for installation.
Buy with confidence as every APPS2Car product comes with one-year warranty.
Description
Universal CompatibilityThis 3M Adhesive Dashboard Pad is compatible with all APPS2Car Dashboard Suction Cup Mounts for smartphones, and Garmin, TomTom GPS mounting pedestals.
Dashboard Pad Mounting Instructions
1. Choose the location you would like to apply the disk and clean the dashboard surface area thoroughly to remove any dust or debris. Allow the area to dry completely before applying the mounting disk.
2. Remove the paper cover from the dashboard pad.
3. Stick the pad on the cleaned dash surface, and rub firmly over surface to ensure a strong adhesive grip. And remove the protective film.
Note: Let the adhesive set for 3 hours before installing suction cup mount. According to customer reviews, it is better to let it set for 24-48 hrs before attaching suction cup mount onto it.
4. Place the suction cup of the pedestal (sold separately) firmly down on the center of the mounting pad and lower the securing lever.
Note:
* Do not place the mount in or near an air bag deployment zone or where it will obstruct view of the road or hinder vehicle operation. Please mount it on a flat surface.
** Each pad is one-time use only. Once removed, it can not be reapplied.
Removal Tip
To remove the Adhesive Dashboard Pad, pull up on the ring tab slowly. If you feel a lot of resistance, slide dental floss or a plastic slice under the pad to help loosen the seal. Slide in and lift it up slowly little by little, do not rush.
Package
3 Pcs Dashboard Pad
2. Rovtop 3 Pieces Adhesive Mounting Disk for Car Dashboards Vehicles with Windshields (Medium)
Feature
Come with 1pcs 105mm and 2pcs 75mm adhesive mounting diskApply the adhesive side to the dash and the suction cup from your existing mount to the top side of the disc
Adhesive is strong yet leaves no residue when removal is required
Ideal for vehicles with windshields that may be hard to reach
Description
Package included:1x 105mm Adhesive Mounting Disk;
2x 75mm Adhesive Mounting Disk
Warranty:
24-month warranty.
Note:
1.It is suggested to allow 24 hours for the adhesive to solidify before securing the base of the mount to the center of the disk
2.How to remove: Saturate the area with Medicinal alcohol or other adhesive removal product, then scrape the adhesive with a dental floss
Any questions you have, please feel free to contact us. We will get you back within 24 hours.
3. Randconcept Dashboard Pad Mounting Disk for Suction Cup Phone Mount & Garmin GPS Suction Mount Sat Nav Dash Cam Holder Stick On Universal Dash Mount Pad w/3M Adhesive 2.76" Wide 70mm Diameter 2 Pcs
Feature
WIDE COMPATIBILITY: Adhesive mounting disk fits any suction cup style or accessories mounting within 70mm in diameter suction cup for adhering to dashboards in the market. Our sticky disc is flexible option for carmount sticky pad replacement!MOUNTING WITH SMOOTH & FLAT SURFACE: Thanks for PVC plate and 3M adhesive, upper part PVC plate provides smooth and flat surface while bottom Sticky 3M PE foam adhesive fixed dashboard textured surface!
NO MORE ADHESIVE SEPARATED: The bottom grey color PE foam adhesive is enhanced version comparing with white adhesive in the market. It performs well even in hot and cold weather or climates.
SAFE JOURNEY: After suction cup firmly attached with our sticky pad, you can enjoy navigation with smartphone or garmin GPS devices even camera securely on dashboard. No more dropping phone holders or garmin accessories for gps during driving.
100% RISK-FREE PURCHASE: At Randconcept we know our customers want nothing but the finest which is exactly what we offer. From using the highest quality materials to using state of the art adhsive disc, we take all the right steps to make sure you get the finest. We're so confident that you'll love our sticky pads that we offer a 100% Customer Satisfaction Warranty so that you know you're getting exactly what you pay for!
Description
Making Driving Safer & More Convenient With Randconcept Sticky Pads
Randconcept dashboard pad sticks to Dashboard with high quality sticky gel to get your car phone mount suitable for more smooth or even textured surfaces, since it will help change the mounting surface to the completely flat surface where the suction cup of mount would have the best performance.
Installation:
1) Clean the dashboard;
2) Remove the protective cover on the base of the disk;
3) Press the disk to the dashboard and leave more than 30 seconds;
4) Attach suction mount on the disc.
Features Youll Love:
Your phone holder or garmin gps mount will firmly attached to car dashboard no matter how many bumps you hit
Now you can change your suction cup to new location with our sticky disc, even from windshield to dashboard.
Enjoy stafety driving without dropping suction phone holder or gps mount again!
Package Includes:
Alcohol Pad x2
Installation guide x1
3M adhesivesticky Plate x2
Note:
Please note that each pad is one-time use only. Once removed, it may not be reapplied.
Please clean the your suction cup with running water and let it air dry before attach to the sticky plate surface.
Click on the Add To Cart button now to Order Today and make traveling safer and easier with Randconcept Sticky Pads
4. VANMASS Dashboard Pad Mounting Disk for Suction Cup Phone Mount Stand Cradle GPS Suction Mount Sat Nav Dash Cam Holder Stick on Flat Dash Mount Pad with Sticky Gel Adhesive 3.2in Diameter (2 Pcs)
Feature
VANMASS dashboard pad sticks to Dashboard with high quality sticky gel to get your car phone mount suitable for more smooth or even textured surfaces, since it will help change the mounting surface to the completely flat surface where the suction cup of mount would have the best performance.This dash pad requires a flat surface but not necessarily a smooth surface.
We do NOT recommend to use this dashboard pad on leather, wall or filmed glass surfaces since the pad is designed with strong viscosity.
Compatible with all VANMASS Dashboard Mounts or any suction cup style mount with diameter less than 3 inch.
This is a semi-permanent solution. Each pad is one-time use only. Once removed, it may not be reapplied.
5. VICSEED 2 Pieces Adhesive Mounting Sticky Disk for Car Dashboards Vehicles Suction Cup Phone Mount with 80mm Diameter
Feature
VICSEED dashboard pad providing smooth, glass-like surfaces for pedestals suction cup car phone mounts. It helps the car phone mount work more effectively.3M PE adhesive at the bottom can be fixed on textured surfaces.
Has a diameter of around 3.15 inches, applicable to most suction cup GPS or mobile phone holders on the market.
Provides huge sticky on car dashboard, desk, windshield or other smooth clean surfaces.
Any pronlem, please feel free to contact us at any time. We provide 12 month warranty.
Description
VICSEED 2 Pieces Adhesive Mounting Sticky Disk for Car Dashboards Vehicles with Windshields6. Dashboard Mount Disc 70mm Diameter 3M Adhseive Dash Mounting Pad for Tom Tom Garmin Magellan GPS Suction Cup Mount Also for Dash Phone Holder - 2 Pack
Feature
Smooth Surface Mount Disc - To provide smooth, glass-like surface for pedestals of suction cup car mounts to work more effectively. Suitable for Every Suction MountStrong Sticky 3M PE Foam Pad - 3M Adhesive Tape sticks to almost all textured surfaces. *Make sure the surface is cleaned throughly and free of any dashboard conditioners or other treatments.
Universal Compatibility - Semi-permanent Adhesive Mounting Disc works with all Garmin TomTom Magellean GPS suction mounting pedestals, and dashboard suciton phone mount.
Size: about 70 mm in diameter
Note: Each pad is one-time use only. Once removed, it may not be reusable.
Description
Universal CompatibilityAbout 70mm diameter fits for almost all Garmin TomTom Magellean GPS mounting pedestals and dashboard suction phone mount.
Dashboard Mounting Instructions
1. Choose a suitable location for disk (and pedestal) installation.
Do not place mount in or near an air bag deployment zone or where it will obstruct view of the road or hinder vehicle operation.
2. Clean the dashboard surface area thoroughly with alcohol pad to ensure dashboard is clean and free of any dashboard conditioners or other treatments.
3. Remove the paper backing of the disk and place on the cleaned surface. Press the top of the disk down firmly to allow the adhesive to stick to the surface. Allow 24 hours for the adhesive to cure to the surface before applying any pressure.
4. Place the suction cup of the pedestal (sold separately) firmly down on the center of the mounting disk and lower the securing lever.
Removal Instructions
1. Prepare the surface around the disk by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the adhesive area for about a minute.
2. Take a long piece of dental floss in each hand and slowly work back and forth at the base of the adhesive disk. Gently use the dental floss to cut the adhesive from the dashboard until the black plastic disk is removed.
3. If the sticky adhesive area breaks apart or does not come off completely, re-apply a small amount of alcohol (or adhesive removal liquid) and carefully lift off the remaining area by hand.
Note: Adhesive disk is intended for semi-permanent installation and one-time application. Once removed, it can't be reapplied.
Package
2 * 70mm Adhesive Mounting Disk
7. 8PACK MeetRade Stick On Double Sided Heavy Duty Adhesive Pad Disk for Lock Sucker Suction Cup Hook Mounting on Dashboard, for xiaomi xiaoyi gopro Camera and GPS Sat Nav Cam 70mm
Feature
1.WHERE TO USE? Your sucker is not strong enough and fall off often? This MeetRade super strong adhesive pad can help your suction cup to lock firmly. Never fall again!2.MATERIAL:Made of 3M VHB super strong adhesive, it can help suction cup installs on not totally flat surfaces tightly.
3.SIZE AND USE: Diameter 70MM(2.76 inch),fit for almost kind of suction cup! HOW TO USE: 1. Clean the surface of the suction cup by alcohol.2.peel the adhesive pad and apply to the suction cup carefully, remember you finger don't touch the adhesive pad.3.Clean the surface you need to install.4. peel the protector film off, then apply on.5.Press it at least 30 second.6.Don't use it in 12 hours.
4.EASY TO MOVE: When you need to move it, just peel it from the side and slowly pull it up. The adhesive is easily removable and never leave a residue.
High temperature resistance, water resistance,the adhesive can work on the high temp. even in a car,it also waterproof, so can install the camera out side the house.
5.MULTI-PURPOSE ADHESIVE: this adhesive provide the best solution for your lock sucker hook, car mount and GPS,Also other mounting used.
Description
1.WHERE TO USE? Your sucker is not strong enough and fall off often? This MeetRade super strong adhesive pad can help your suction cup to lock firmly. Never fall again!2.MATERIAL:Made of 3M VHB super strong adhesive, it can help suction cup installs on not totally flat surfaces tightly.
3.SIZE AND USE: Diameter 70MM(2.76 inch),fit for almost kind of suction cup! HOW TO USE: 1. Clean the surface of the suction cup by alcohol.2.peel the adhesive pad and apply to the suction cup carefully, remember you finger don't touch the adhesive pad.3.Clean the surface you need to install.4. peel the protector film off, then apply on.5.Press it at least 30 second.6.Don't use it in 12 hours.
4.EASY TO MOVE: When you need to move it, just peel it from the side and slowly pull it up. The adhesive is easily removable and never leave a residue.
High temperature resistance, water resistance,the adhesive can work on the high temp. even in a car,it also waterproof, so can install the camera out side the house.
5.MULTI-PURPOSE ADHESIVE: this adhesive provide the best solution for your lock sucker hook, car mount and GPS,Also other mounting used.
8. MeetRade 4 Pack Dashboard Pad Mounting Disk for Suction Cup Phone Mount & GPS Suction Sat Nav Dash Camera Holder Double Side Removable Stick On Universal Dash Mount Pad 3/M Adhesive 80mm Diameter
Feature
MeetRade adhesive mounting pads disc To provide smooth, glass-like surfaces for pedestals of suction cup car mounts to work more effectively.MeetRade adhesive can be fixed on textured surfaces.can attach kids fenders, motion detectors,kitchen guards, car dashboard toys & GPS, toothbrush holder, metal sign, spice rack,posters,photoes & pictures, led lights etc. These pads also works perfect with suction cups, will stick to any wall.
MeetRade Almost a permanent bond / very strong glue. They hold well and expect to last a long time. It is removable and waterproof, no reduces, if you need to move it, just peel it from the side slowly.
MeetRade Sticky pads help to mount motion detectors on stairways, and different parts of moldings, without using screws. applicable to most suction cup GPS/camera/ Action camera mobile holders on the market.
Package include:4PACK X 8CM Disc ( 3.15inch )+Alcohol Pads.
Description
MeetRade adhesive mounting pads disc To provide smooth, glass-like surfaces for pedestals of suction cup car mounts to work more effectively.MeetRade adhesive can be fixed on textured surfaces.can attach kids fenders, motion detectors,kitchen guards, car dashboard toys & GPS, toothbrush holder, metal sign, spice rack,posters,photoes & pictures, led lights etc. These pads also works perfect with suction cups, will stick to any wall.
MeetRade Almost a permanent bond / very strong glue. They hold well and expect to last a long time. It is removable and waterproof, no reduces, if you need to move it, just peel it from the side slowly.
MeetRade Sticky pads help to mount motion detectors on stairways, and different parts of moldings, without using screws. applicable to most suction cup GPS/camera/ Action camera mobile holders on the market.
Package include:4PACK X 8CM Disc ( 3.15inch )+Alcohol Pads.
9. Crossery Adhesive Mounting Disk for Car Dash Board | Phone Mount, Dashboard Cam & Smartphone Holder Suction Disc | Compatible with Garmin & Tom Tom GPS | Cell Phone & Car Accessories | 90mm 2-Pack
Feature
? FOR ALL SUCTION PEDESTALS - Transform your windshield mount into a dashboard console with our adhesive disk. It works with any 80mm suction cup for most smartphones as well as Garmin and TomTom GPS.? FAST APPLICATION - No assembly or tools required. Simply clean the part of your dashboard where you want to install the disk. Then, peel off the paper backing, place the disk on the clean surface, and press down.
? UNINSTALL EASILY - All you need is rubbing alcohol or any adhesive removal product. Use a cotton swab to cover the entire adhesive. With a long piece of dental floss, cut through until the disk detaches.
? NO ADHESIVE RESIDUE - Upgrading to a bigger device? No worries! You can remove this mounting disk any time and it won't leave a trace or damage your dashboard.
? STRONG & STICKS ANYWHERE - This car accessory is heat resistant and built with durable materials to last a long time. It will adhere to vertical surfaces, soft touch dashboards and windshields.
Description
Is your windshield-mounted device distracting you while driving? In your busy lifestyle, staying connected is a must. You also make sure that it doesn't risk your safety. So, you install pedestals in your car to hold your mobile phone, GPS and camera. They make it possible to keep your hands on the wheel while carrying on with business. Unfortunately, most suctions are designed to attach to the windshield, which isn't exactly the safest place to mount your devices. There's the danger of falling off their holders. They may also block your view of the road at certain angles. Convert your windshield mount to a dashboard console with Crossery Adhesive Mounting Disk! This universal car accessory works well with any 80mm smartphone, car camera and GPS mounting pedestal. The suction cup adheres to the disk, which you stick to your dashboard. In this upright position, you eliminate the risk of your devices falling off of their cradles. Still prefer your electronics mounted on the windshield? No Problem! Our adhesive disk comes in a much larger size than your suction cup to ensure a secure and sturdy fit that keeps your device holder stable. No matter where you decide to place your gadgets, or how small your car is, our compact disk won't take up too much space. Plus, the adhesive is highly resistant to heat, so there's no danger of the disk accidentally detaching. Here are more reasons to love our adhesive mounting disk: ? You have 80mm and 70mm options for smaller devices and mounting pedestals ? It comes in black to fit all car interiors ? The strong but gentle material won't scratch your dashboard or windshield ? A practical gift for other busy friends and family Keep your dashboard, windshield and gadgets protected. Add Crossery Adhesive Mounting Disk to your cart TODAY!10. Arkon 80mm Adhesive Mounting Disk for Car Dashboards GPS Smartphone Dashboard Disc
Feature
Adhesive mounting disc works with any 70mm windshield suction mounting pedestals for adhering to dashboardsCompatible with Arkon GN079WDSBH, GN068WDSBH, GN022SBH, GN014SBH, GN015SBH, and GN042SBH mounting pedestals
2 year limited warranty
