When you want to find controller temperature, you may need to consider between many choices. Finding the best controller temperature is not an easy task. In this post, we create a very short list about top 10 the best controller temperature for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 controller temperature:
Best controller temperature
1. bayite AC 110V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor
Feature
KEEP TEMPERATURE IN DESIRED RANGE: It's on/off control mode. Turn on your device at a degree and turn it off at another degree. The difference of the 2 degrees can be minimum 1 and maximum 25.HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device your need.
LONG SENSOR CABLE: 3m/9.8ft. Size of the WATERPROOF probe head: 4mm*20mm
WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc.
With compressor delay protection function for refrigerating control
Description
This is an AC 110V Fahrenheit Digital temperature controller. It can control the power to a freezer to prevent it from getting too cold, or control the power to a terrarium to prevent it from getting too hot, maintain a stable environment.This controller provides heating and cooling modes and temperature alarm function.
For example:
If you choose heating mode, set control Value to 100F, set span value to 10F. The relay will be connected when temp drop to 90F. The relay will be disconnected when temp reaches 100F;
If you choose cooling mode, set control Value to 100F, set span value to 8F. The relay will be connected when temp reaches 108F. The relay will be disconnected when temp drops to 100F
Specification:
1.Power supply for the controller: AC 110V, 50/60Hz
2.Temperature unit: Fahrenheit, Measure range: -4 ~ 220F
3.Temperature measure resolution: 1
4.Accuracy: 0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 1 - 25(Max temp span between ON and OFF)
7.Control resolution: 1(Minimum temp span between ON and OFF)
8.Power consumption: less than 3W
9.Relay contact capacity: 10A/250VAC, 10A/110VAC
10.Data retention: Yes
11.Compressor delay protection: YES
12.Product size:8.5*7.5*3.5cm / 3.4*3*1.4in
13.Sensor Cable length: 3m/9.8ft
Package Content:
1x Digital Temperature controller
2. Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding
Feature
Plug and play design, easy to use;Dual relay output, be able to connect with refrigeration and heating equipment at the same time
Support reading with Centigrade or Fahrenheit unit
Maximum output load: 1100W(110V)
Dual display window, be able to display measured temperature and set temperature at the same time
Description
Main features:Plug and play design, easy to use;
Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load: 1100W(110V);
Dual display window, be able to display measured temperature and set temperature at the same time;
Temperature calibration;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Specification
Temperature Control Range : -50~99 C / -58~210 F
Temperature Resolution: 0.1 C / 0.1 F Temperature Accuracy: 1C (-50 ~ 70C) / 1F (-50 ~ 160 F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~265VAC, 50Hz/60Hz Temperature Control Output: Max. 10A, 100V ~265V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Dimension Body: 140x68x33mm (5.5x2.7x1.3inch)
Socket: 85x42x24mm(3.3x1.7x1inch)
Ambient Temperature: -30~ 75 C / -22~ 167 F
Storage Temperature: -20~ 60 C / -4~ 140 F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
Package Content:
1x ITC-308 temperature controller;
1x Manual
Note: This listing sensor's probe dimension is 50mm x 6mm. If you want 12" probe sensor, you can search on Amazon and buy one by ASIN: B01A6DIPFM or ASIN: B01A51OLR6.
3. Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W
Feature
[Convenient Design] Plug and play design, easy to use. Support C/F display.[Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
[Dual Display Window] Be able to display measured temperature and set temperature at the same time.
[Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
[Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Description
Specification:Temperature Control Range: -50~99C / -58~210F
Temperature Resolution: 0.1C / 0.1F Temperature Accuracy: 1C (-50~70C) / 1F (-50~160F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5x2.7x1.3inch)
Socket Dimension: 85x42x24mm (3.3x1.7x1inch)
Ambient Temperature: -30~75C / -22~167F
Storage Temperature: -20~60C / -4~140F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
4. Inkbird ITC308 Freezer Thermostat Heating Cooling Plug Temperature Controller Outlet 110V 1200W Digital Temp Control for Greenhouse Heater Cooler Reptile Brewing Fermentation Kegerator Probe
Feature
Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.Be able to connect with refrigeration and heating equipment at the same time.
Easily calibrated.
Can display in Centigrade or Fahrenheit.
Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
Description
Features:Temperature Control Range : -50~99 C / -58~210 F
Temperature Resolution: 0.1 C / 0.1 F Temperature
Accuracy: 1C (-50 ~ 70C) / 1F (-50 ~ 160 F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5x2.7x1.3inch)
Socket: 85x42x24mm(3.3x1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 C / -22~ 167 F
Storage Temperature: -20~ 60 C / -4~ 140 F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC308
1x Manual
5. Inkbird 12 periods Timer Stage ITC-310T-B Digital Heating & Cooling Pre-wired Temperature Controller For Home brewing, Greenhouse, Heating mat
Feature
[Multipurpose] Mainly used to control temperature during fermentation process of beer and wine brewing, also widely used in home brewing, aquarium, pet breeding, and hatching, etc.[Multiperiod] Can be set 12 different temperatures in 12 different periods of time, and the timers will start when the setpoint temperature is reached.
[Large Time Range] Can be set single or cycle control mode. Wider time setting range: 1~999(min/hr), 1~90(days)
[Mode & Function] Support F/C mode and easy to set. Alarm when over-temperature and sensor error.
[Dual Relay Output & Display] Dual relay output, be able to connect with refrigeration and heating equipment at the same time. PV and SV dual display windows, be able to display measured temperature and setting temperature at the same time.
Description
ITC-310TB is a dual-relay outlet thermostat with programmable timer function, which can be set to automatically control 12 periods timer stage with different temperatures.The ITC-310TB is mainly used to control temperature during fermentation process of beer and wine brewing. It also widely used in home brewing, aquarium, pet breeding, hatching.
What's more, it's multipurpose for you to use in boiler temperature control, geothermal temperature control, heating pump constant temperature cycle, and strain culture fermentation.
(Seed sprouting, electric heating, electric oven, over-temperature protection and automatic temperature control system of all kinds of electrical equipment, etc.)
Specification:
Temperature Control Range : -50~120C /-58~248F
Temperature Resolution : 0.1C / 0.1F
Measuring Accuracy : 1C (-50~ 70C) / 1F (-58~160F)
Temperature Control Mode: On/Off Control, Heating and Cooling
Timing Accuracy: 24 hours1.7s
Periods of Time Max: 12 periods
Cycle Setting: 1-999 times cycle, or 00 infinite cycle
Input Power: 100 ~240VAC, 50Hz/60Hz
Control Output Current: Max.10A
Power: Max. 1200W (110V)/ 2200W (220V)
Alarm: High/ Low Limit setting Alarm
Sensor Type: NTC Sensor (including)
Sensor Length: 2m / 6.56ft
Relay Output: Cooling (10A,100-240VAC)
Heating (10A,100-240VAC)
Input Power Cable Length: 1.5m ( 5ft )
Dimension: 140x68x33 mm(body)
Operating Ambient Temperature: -30~ 75C / -22~ 167F
Storage Condition Temperature: -20~60C / -4~140F
Humidity: 20~85% (No freeze or moisture condensation)
Warranty: 1 Year
Package included:
1 x ITC-310TB Thermostat with Timer
1 x Manual
6. Beer Cooler Refrigerator Freezer conversion Temperature Controller Thermostat
Feature
Beer Cooler Refrigerator Freezer conversion Temperature Controller ThermostatDescription
TIP #1: Some folks try to sell regular refrigerator thermostats as a freezer/fridge conversion kit... Don't use them for your beer cooler, the operating range goes far below the freezing point (0F)... Too many brewers lost a whole batch of excellent, but frozen beer! Our conversion thermostat is custom made for your brewing project, ranging from 30F to 50F. TIP #2: Programmable digital thermostats. Whenever a short power failure occurs like in bad weather or other short interrupts, the thermostat stops working and need to be manually reset. You will find out when you open the cooler door, 90 degrees inside... Converts any freezer into a super efficient refrigerator or kegerator. Commercial grade, calibrated, adjustable for your special preference. Save energy - operates at about $20 Dollars of electricity per year. Comes complete with customized installation kit (no need to buy expensive tools) Easy to install - just connect the 2 wires plus ground (don't need to call an electrician...). Installation instruction with pictures included.7. Inkbird ITC-1000 Dual Stage Digital Temperature Controller Fahrenheit Celsius Thermostat with Sensor for 3D Printer,Freezer,Fridge,Hatching ect (110 Volt)
Feature
It does indeed read in deg F.Can control both heating and cooling output
Has an alarm to indicate sensor failure or high temperature
Highly accurate and reliable temperature controller
Be more user friendly than the STC-1000
Description
Fahrenheit and Celsius Display Can Be Choose
Temperature Calibrating, Refrigerating control output delay protection
Control the Temperature by Setting the Temperature Set Value and the Difference Value
Alarm When Temperature Exceeds the Limit or When Sensor Error
2 Relays, Switch Between Cooling and Heating Modes
Technical Parameter:
Output: 2 Relays
Temperature Measuring Range: -50210 oF / -50 oC-99 oC
Resolution: 0.1 oF / 0.1 oC
Accuracy: 1 oF-50 oF -160 oF/ 1 oC-50 oC -70 oC Power Supply: 110VAC 50Hz/60Hz
Power Consumption: 3W
Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC);
Ambient Temperature: 0 oC-60 oC
Storage Temperature: -30 oC-75 oC
Relative Humidity: 20-85% (No Condensate)
Package Content:
1x Temperature controller ITC 1000 110V
1x 7.87" SENSOR
1x Muanal
8. Inkbird Digital Outlet Heat Temperature Controller with Day Night Control for Brewing, Aquarium, Breeding, Reptiles, Hatching, Heat Mat (ITC-306T)
Feature
[Convenient Design] Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.[Dual Display Window] Be able to display measured temperature and set temperature at the same time.
[Only Heating] Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
[Dual Time Cycle Setting] Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
[Different Functions] Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
Description
Inkbird day and night temperature controller is a pre-wired heating output temperature controller (No Cooling Control) with time function specifically for breeding and planting.It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the physiological needs of animals and plants.
It can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc.
With large power output 1,200W, it's suitable for most applications. And the temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.
Specification:
Temperature Control Range: -50~99 C / -58~210 F
Temperature Resolution: 0.1 C / 0.1F
Temperature Accuracy:1C (-50~70C) / 1F (-58~160F)
Input Power : 100~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Ambient Temperature: -30~ 75 C / -22~ 167 F
Storage Temperature: -20~ 60 C / -4~ 140 F
Humidity: 20~85% (No Condensate)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Relay Contact Capacity: Heating (10A, 100-240VAC)
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
Body Dimension: 140x68x33mm (5.5x2.7x1.3 inch.)
Socket Dimension: 85x42x24mm (3.3x1.7x1 inch.)
Warranty: 1 Year
Package Included:
1 x Temperature and Time Controller
1 x Manual
9. Inkbird 10A 110V Digital Thermostat with Heat and Cool Relays ITC-308 Home Brewing
Feature
[Convenient Design] Plug and play, easy to use.[Reading Mode] Support reading with Centigrade or Fahrenheit unit.
[Safe] Maximum output load: 1100W(110V).
[Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
[Dual Display Window] Be able to display measured temperature and set temperature at the same time.
Description
Features:- Plug and play design, easy to use
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Support reading with Centigrade or Fahrenheit unit
- Maximum output load: 1100W(110V)
- Dual display window, be able to display measured temperature and set temperature at the same time
- Temperature calibration
- Compressor delay protection for refrigeration control
- High and low temperature alarms are available
- Over-temperature and sensor fault alarm
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change
Specification:
Temperature Control Range: -50~99C / -58~210F
Temperature Resolution: 0.1C / 0.1F Temperature Accuracy: 1C (-50~70C) / 1F (-50~160F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5x2.7x1.3inch)
Socket Dimension: 85x42x24mm (3.3x1.7x1inch)
Ambient Temperature: -30~75C / -22~167F
Storage Temperature: -20~60C / -4~140F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
Note:
This listing sensor's probe dimension is 50mm x 6mm.
If you want 12" probe sensor, you can search on Amazon and buy one by ASIN: B01A6DIPFM or ASIN: B01A51OLR6.
10. Inkbird C206T 1500W Heat Mat Temperature Controller, Day and Night Thermostat, 6.56FT NTC Sensor, F and C Degree, -58-212F
Feature
[Setting Independently] Inkbird C206T lets you to control your desired environment temperature. You can set the day and night temperature independently to connect your heat equipment, then set the temperature that you want to maintain.[Accuracy Temperature] The heat thermostat is with 6.56ft precise temperature sensor and its adjustable set points temperature control from -58 to 212F with an accuracy of 1F.
[Three Display Window] Be able to display 3 different details such as the current temperature, the setting temperature and the current time.
[Waterproof Probe] The NTC stainless probe is waterproof, IP68 Grade. Its diameter is 1.57"x 0.2".
[Safe & Warranty] 12 months Warranty! Please be sure to use within 13.5A 1500W.
Description
C206T is a heating output temperature controller (No Cooling Controller) with day and night temp control for breeding and planting, etc.With its plug-n-play design, it can easily controls the temperature of your heat device, providing constant optimum temperature for the physiological needs of animals and plants.
C206T can be widely used in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc.
Specification:
Input: 100~265VAC 50/60HZ
Temperature Control Range: -50~100C / -58~212F
Heat Differential Value: 0.3~15C / 1~30F
Temperature Calibration: -9.9~9.9C / -15~15F
Ambient Temperature: -30~75 C (-22~167F)
Dimension: ( 3.66(L)*2.48(W)*1.34(H) in )
Package Included:
1 x 13.5A Temperature Controller C206T
1 x 6.56FT Sensor
1 x Manual
