When you looking for mosaic pins 1/4 inch, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable mosaic pins 1/4 inch is not an easy task. In this post, we show you how to find the right mosaic pins 1/4 inch along with our top-rated reviews. Please check out our suggestions to find the best mosaic pins 1/4 inch for you.
Best mosaic pins 1/4 inch
1. Mosaic Pin Pins Knife Handle Custom Knives Blank Blades Brass Copper Steel for Hunting Knives (1/4") (#65 (1/4"))
Feature
Our mosaic pins are hand-crafted by a veteran knife-maker in the USA.Diameter: 1/4", Length: 5.8 inches approximately. You get 1 piece of mosaic pin stock with each order. For knife handles.
If your knife handle is 0.75"-0.9" thick, this mosaic piece will make 6 pins when cut (good for several knives). If your knife handle is 0.95"-1.15" thick, this mosaic piece will make 5 pins when cut (good for several knives). If your knife handle is 1.2"-1.4" thick, this mosaic piece will make 4 pins when cut (good for several knives).
Our mosaic pins have been vacuum-pumped to remove air bubbles. The resin is pulled in with a high-end vacuum, which pulls the glue down, and removes any small bubbles. The pins are cured afterward and lastly polished and burrs removed.
You wont get any "rattlers" with our high quality mosaic pins (a "rattler" is where you have loose pieces inside the mosaic pin due to inadequate vacuum pumping out of air bubbles prior to the curing stage).
Description
Our mosaic pins are hand-crafted by a veteran knife-maker in the USA.As a note: It is possible to drill a knife blank's pin holes larger (or create your own pin hole locations). You simply need to use drill bits intended for drilling metal, which are capable of drilling through hardened high carbon steel. This method is recommended because you be able will get the exact fit you are looking for when using our mosaic pins.
You will receive one piece of mosaic pin stock. Each piece comes in approximately 5.8" length.
We use only the highest quality brass, copper and steel.
If your knife handle is 0.75"-0.9" thick, this mosaic piece will make 6 pins when cut, good for several knives.
If your knife handle is 0.95"-1.15" thick, this mosaic piece will make 5 pins when cut, good for several knives.
If your knife handle is 1.2"-1.4" thick, this mosaic piece will make 4 pins when cut, good for several knives.
Our mosaic pins have been vacuum-pumped to remove air bubbles. The resin is pulled in with a high-end vacuum, which pulls the glue down, and removes any small bubbles. The pins are cured afterward and lastly polished and burrs removed.
The center of the mosaic pin is filled with clear epoxy resin. The filling will appear dark when initially received, however light will be able to shine through when you are done cutting this down to small pieces for your knife handle. The transparency will become evident with the smaller length pieces.
You wont get any "rattlers" with our high quality mosaic pins (a "rattler" is where you have loose pieces inside the mosaic pin).
A penny is shown for a size comparison. Penny not included.
2. Mosaic - USA KMS Mosaic Pin for Knife Handle 1/4" x 11" Brass #105-1
Feature
Style -105-11/4" Diameter x 11" Length
Brass with Brass Rods and Black Epoxy
Description
Use these mosaic pin/lanyard tubes in your knife handles to give some extra detail. Tip: These get hot very quickly when being worked and the epoxy will soften or worse break down. This is just the nature of mosaic tubing. Keep them cool when you getting them to length or working them in your handle. Cut or grind them with fresh blade or belt. Dip frequently if you need to.3. Mosaic - USA KMS Mosaic Pin for Knife Handle 1/4" x 11" Brass #117-1
Feature
Style -117-11/4" Diameter x 11" Length
Brass Tube, Brass Star and Brass Rods with Black Epoxy
Description
Use these mosaic pin/lanyard tubes in your knife handles to give some extra detail. Tip: These get hot very quickly when being worked and the epoxy will soften or worse break down. This is just the nature of mosaic tubing. Keep them cool when you getting them to length or working them in your handle. Cut or grind them with fresh blade or belt. Dip frequently if you need to.4. Mosaic - USA KMS Mosaic Pin for Knife Handle 1/4" x 11" Brass #108-1 - Ocean Blue Epoxy
Feature
Style -108-11/4" Diameter x 11" Length
Brass Tubes and Rods with Ocean Blue Epoxy
Description
Use these mosaic pin/lanyard tubes in your knife handles to give some extra detail. Tip: These get hot very quickly when being worked and the epoxy will soften or worse break down. This is just the nature of mosaic tubing. Keep them cool when you getting them to length or working them in your handle. Cut or grind them with fresh blade or belt. Dip frequently if you need to.5. Mosaic - USA KMS Mosaic Pin for Knife Handle 1/4" x 11" Brass #117-1
Feature
Style #117-1Brass Tube with Stainless Steel Rod and Star Design
Use these mosaic pin/lanyard tubes in your knife handles to give some extra detail.
Description
Tip: These get hot very quickly when being worked and the epoxy will soften or worse break down. This is just the nature of mosaic tubing. Keep them cool when you getting them to length or working them in your handle. Cut or grind them with fresh blade or belt. Dip frequently if you need to.6. 1/4" Diameter Mosaic Knife Handle Pins (Brass/Red, 6")
Feature
Custom pins add a refined elegance to your knife handleEach pin is 1/4" in diameter, made of brass
This unit is 6" long, and 3". Approximately 1-1/2" to 3" is used per fastening
Great gift for your custom knives craftsman!
Description
Knife pins hold the scales to the tang, and are an integral part of nearly every knife's handle. While many knives use standard stainless steel pins, sometimes you want your workmanship to stand out, and our custom mosaic pins help you do just that!7. Mosaic - USA KMS Mosaic Pin for Knife Handle 1/4" x 11" Brass #108-2 - Red Epoxy
Feature
Style -108-21/4" Diameter x 11" Length
Brass Tubes and Rods with Red Epoxy
Handmade in house in the USA
Description
Use these mosaic pin/lanyard tubes in your knife handles to give some extra detail. Tip: These get hot very quickly when being worked and the epoxy will soften or worse break down. This is just the nature of mosaic tubing. Keep them cool when you getting them to length or working them in your handle. Cut or grind them with fresh blade or belt. Dip frequently if you need to.8. Mosaic - Mosaic Pin for Knife Handle 1/4" x 11" Stainless Steel with all Stainless Steel Pins #313-2
Feature
Style #313-2Stainless Steel Tube with Stainless Steel rods and black epoxy
Use these mosaic pin/lanyard tubes in your knife handles to give some extra detail.
Description
Tip: These get hot very quickly when being worked and the epoxy will soften or worse break down. This is just the nature of mosaic tubing. Keep them cool when you are getting them to length or working them in your handle. Cut or grind them with fresh blade or belt. Dip frequently if you need to.9. WoodRiver Mosaic Pin J2-6mm x 120mm (1/4" x 4-23/32")
Feature
Add decorative accents and function to your knife kitsDecorate turnings, boxes and furniture pieces
Easily cuts with a hacksaw
Metal files and sandpaper is used to flatten and polish
1/4" stainless steel outer tube, seven 1/32" copper tubes, seven 3/64" brass tubes, one 3/32" stainless steel center tube with seven 1/32" copper tubes, and one 1/32" brass tube.
Description
Mosaic pins serve two essential functions, one as a decorative accent and the second to assist in append knife scales to the tang of the blade. These ornamental pins can be used to add embellishment to turnings, lidded boxes, clock faces and much more. You are sure to find the ideal pattern to accent your project from the varying combinations of brass, copper and stainless steel used to construct these pins. Performing bores on scrap pieces of wood is suggested to ensure good fit for your project. Recommended drill bit size is 6mm.10. Mosaic - USA KMS Mosaic Pin for Knife Handle 1/4" x 11" Brass #108-4 - DARK GREEN EPOXY
Feature
Style 108-41/4" diameter x 11" length
Brass with Brass Tubes and Rods with GITD Green Epoxy
Handmade in house in the USA
