When you looking for mold maker kit, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable mold maker kit is not an easy task. In this post, we show you how to find the right mold maker kit along with our top-rated reviews. Please check out our suggestions to find the best mold maker kit for you.
Best mold maker kit
1. Smooth-On Silicone Mold Making, Liquid Rubber OOMOO 30, Easy to Use - Trial Size 2.8 lb
Feature
MIX RATIO: 1A:1B BY VOLUME - Easy to use silicone rubber compound features a convenient one-to-one by volume mix ratio, no scale is necessary *Packaging may vary*SHORE A HARDNESS: 30 - This scale measures the hardness of flexible rubber molds. A 30A hardness is in the soft to medium soft range, between the flexibility of a rubber band and pencil eraser
POT LIFE: 30 MINUTES, CURE TIME: 6 HOURS - This product cures at room temperature with negligible shrinkage. Best to store at room temperature, see "For Best Results" section below
LOW VISCOSITY FOR EASY MIXING AND POURING - Great for making simple one- or two-piece block molds, no vacuum degassing is necessary
PERFECT FOR ART AND INDUSTRIAL APPLICATIONS - Often used for molds to reproduce sculptures and other prototypes, casting plaster, resins, and wax
Description
Use this silicone mold making rubber for making perfect reproductions that capture intricate detail of original models. OOMOO 30 is easy to use silicone rubber compounds that feature convenient one-to-one by volume mix ratios (no scale necessary). Very low viscosity for easy mixing and pouring and vacuum degassing is not necessary. Cures at room temperature with negligible shrinkage. OOMOO 30 has a 30-minute pot life, with a six-hour cure time.
For the novice mold maker - OOMOO30 does not have great tear strength. They are good for making simple one- or two-piece block molds. OOMOO30 is suitable for a variety of art-related and industrial applications including making molds for sculpture and prototype reproduction, casting plaster, resins and wax.
Technical Information
Mixing Ratio: one to one by volume (100a:130b by weight)
Pot Life: 30 min.
Demold: 6 hrs.
Color: lavender properties (part a and b mixed)
Viscosity: 4,250 cps g/cc: 1.34 Cu. In./Lb.: 20.6
Tensile Strength: 240 psi
Elongation at Break: 250%
Die C Tear Strength: 40 pli
Compression Set: 37%
Shrinkage: .0025 In./In.
Net weight 16 oz. (454 Grams)
For Best Results: Store and use silicone products at room temperature. If material freezes, silicone base will become very thick. Simply allow product to get down to room temperature before use. Adult Supervision Required. Keep Out of the Reach of Children
2. Mold Star 15 SLOW Moldmaking Silicone Rubber - Trial Unit
Feature
TEAR RESISTANT - Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage *Packaging may vary*HEAT RESISTANT - Cured Mold Star rubber is heat resistant up to 450F (232C) and is suitable for casting low-temperature melt metal alloys
CURING- Allow Mold Star 15 SLOW silicone rubber to cure for 4 hours at room temperature (73F/23C) before demolding.
VACCUM DEGASSING - Although not necessary, vacuum degassing helps eliminate any entrapped air in pourable silicone rubber
MOLD PREFORMACE - The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment
Description
Mold Star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star silicones feature relatively low viscosities and vacuum degassing is not required for most applications. Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star rubber is heat resistant up to 450F (232C) and is suitable for casting low-temperature melt metal alloys. Note: THI-VEX is NOT compatible with Mold Star rubbers.MIX RATIO: 1:1 by volume; POT LIFE: 50 mins; DEMOLD TIME: 4 hrs; SHORE A: 15; COLOR: Green3. Environmental Technology 33710 1-Pound Kit Casting' Craft Easymold Silicone Putty
Feature
Environmental-Castin'Craft EasyMold Silicone PuttyHeat range is up to 400 degree F. It is self releasing with no mold release agent required for most applications
It is self releasing with no mold release agent required for most applications
Easy to use, 3-minute working time, 25-minute cure
Ideal for small molds, excellent detail from original
Strong, flexible, reusable molds
High Heat range, up to 400-Degree F
Self releasing, no mold release agent required for most applications.
Description
Environmental-Castin'Craft EasyMold Silicone Putty. Easy to use has a three minute working time 25 minute cure is ideal for small molds and has excellent detail from original strong flexible or reusable molds! Heat range is up to 400 degree F. It is self releasing with no mold release agent required for most applications. EasyMold silicone putty is ideal for a wide range of impression type mold applications including Castin'Craft clear casting resin EasyCast clear casting epoxy wax baking chocolates ice cubes soap plaster air dry clay concrete and low melt metals. EasyMold is an easy to use odor free non-toxic FDA compliant- food grade two component silicone putty. This package contains one pound of EasyMold silicone putty. Conforms to ASTM D 4236. Made in USA.4. Environmental Technology 1/2-Pound Kit Casting' Craft Easymold Silicone Putty
Feature
Easy to use, 3-minute working time, 25-minute cureIdeal for small molds, excellent detail from original
Strong, flexible, reusable molds
High Heat range, up to 400-Degree F
Self releasing, no mold release agent required for most applications.
Description
Easymold silicone putty is ideal for a wide range of impression type mold applications, including castin'craft clear casting resin, easycast clear casting epoxy, wax, baking, chocolates, ice cubes, soap, plaster, air dry clay, concrete and low melt metals. Easymold is an easy to use, odor free, non-toxic, fda compliant - food grade, two component silicone putty.5. Crafter's Companion A20501 Amazing Casting Products Alumilite High Strength 3 Liquid Mold Making Rubber, 1-Pound, Pink
Feature
Perfect to use when you have the deepest undercutsThis package contains one pound of flexible mold-making rubber mix
Complies with ASTM d 4236-94 and LHAMA
Made in USA
Description
Alumilite Corp-High strength 3 liquid mold making rubber: pink. Perfect to use when you have the deepest undercuts! the high strength rubber is thin enough that it will pick up all the detail of your original without the need for vacuum or pressure casting. This package contains one pound of flexible mold-making rubber mix. Complies with ASTM d 4236-94 and LHAMA. Made in USA.6. Mold Star 20T Silicone Mold Making Rubber - Trial Unit
Feature
*Packaging may vary* Pourable translucent platinum-cure silicone rubber with Shore 20A Hardness6 min. pot life / 30 min. cure
Easy to Mix: mixed 1A:1B by volume (no weighing scale necessary)
Good for casting wax, gypsum, resins, concrete and other materials
Heat resistant up to 450F (232C)
Description
Mold Star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star silicones feature relatively low viscosities and vacuum degassing is not required for most applications. Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star rubber is heat resistant up to 450F (232C) and is suitable for casting low-temperature melt metal alloys. Note: THI-VEX is NOT compatible with Mold Star rubbers. MOLD STAR 20T: MIX RATIO: 1:1 by volume; POT LIFE: 6 minutes; DEMOLD TIME: 30 minutes; SHORE A: 20; COLOR: Transparent Read the MSDS before using. Consult the Technical Bulletin for further information. Adult Supervision Required. Keep Out of the Reach of Children.7. Smooth-On OOMOO 25 - FAST Curing Mold Making Silicone Kit - 2 Pints - EASY!
Feature
Easy to use 1:1 by volume ratio . No scale required.Oomoo 25 - Fast setting 75 minute cure time. For quick turnover of molds. Sets FASTER than Oomoo 30.
Cast with smooth-cast, plaster or resin! Also Popular for use with Pros-Aide transfers!
Great for craft moldmaking, candles, replicas, home remodeling, jewelry, and more!
East to use, equal parts A and B. Degassing is not necessary. Cures at room temperature.
Description
Smooth-On Oomoo 25 2 Pint Kit (contains 1 pint of part A and 1 pint of Part B) OOMOO Silicone Rubber - No Scale or Vacuum Chamber Required. OOMOO 25 is an easy to use silicone rubber compound that features a convenient one-to-one by volume mix ratio (no scale necessary). This silicone is easy to work with and has a very low viscosity for easy mixing and pouring. Vacuum degassing is usually not necessary. Takes excellent detail. Cures at room temperature with negligible shrinkage and good tear strength. OOMOO 25 features a 15-minute pot life and 75 minute cure time. OOMOO 25 & 30 are suitable for a variety of art-related and industrial applications including making molds for sculpture and prototype reproduction, casting plaster, resins and wax. Tin cure silicone. Cures to an opaque blue-lavendar. Tip: *Do not cast platinum cure silicone into Oomoo silicone or any other tin cure silicone*8. MoldMaking & Casting Pourable Silicone Starter Kit
Feature
Easy way to get started learning how to make molds and castingsDesigned for use with small FLAT or 2-Dimensional original models
Comes with: Trial Kit OOMOO tin-cure Molding Rubber, Trial Kit Smooth-Cast 300 Casting Resin, 2 oz. Superseal, Ease Release 205 Release Agent, How-To Booklet, How-To DVD, Quick Start Guide
Will teach you step-by-step how to make a pourable mold and casting
Description
Mold rubber can be used to capture exact detail from any model. This starter kit will allow you to make a rubber mold of a small, simple 2 or 3 dimensional model using silicone rubber. Then pour our fast cast plastic to make one or more reproductions of the original. Adult Supervision Required. Keep Out of the Reach of Children.9. Polly Plastics Silicone Molding Putty - 1/2 Lb - for Moldable Plastic | Wax | Clay | Urethane and Epoxy Resins | Plaster
Feature
MAKE YOUR OWN MOLDS THE EASY WAY - Simply knead equal parts of A and B together to form strong, flexible, reusable molds with excellent details. No liquids to mix together, no release agents required, no mold boxes or other equipment required.MAKE YOUR OWN REUSABLE MOLDS THE FAST WAY - Mixed putty sets up in 4 minutes and you can de-mold in only 30 minutes. High heat range up to 450 F.
TONS OF USES - Ideal for small molds for small impression molding, soap molds, candle molds, jewelry making and repair, antique furniture repair and other small object casting.
CAST MANY TYPES OF MATERIALS - Moldable plastics, waxes, clays, urethane and epoxy resins, plaster and even some low melt metals.
NON-TOXIC & ODOR FREE - Made in the USA. Safe to use. 100% satisfaction guarantee on all our products.
Description
Make your own Reusable Molds - the Fast and Easy wayPolly Plastics Silicone Mold Putty is an easy way to make fast reliable molds that you can re-use multiple times. Just knead equal amounts of A (white) and B (blue) together and create a silicone mold by forming the putty around the object you want to replicate. Use it for soap molds, candle molds, antique furniture repair, small impression molding, jewelry making and repair, and other small object casting. You can cast many types of materials in your finished mold including moldable plastics, waxes, clays, urethane and epoxy resins and plaster.
Fast Curing and Durable
Our putty is non-toxic and odor free. It will handle heat up to 450 F. You have 4 minutes of working time and you are able to de-mold in 30 minutes. Self-releasing - no mold release agent required for most applications. Long shelf life, no shrinkage. Not intended for food contact applications.
This package contains .25 lbs. of Part A and .25 lbs. of Part B. Made in USA. Complete instructions. Keep out of reach of children.
Frequently Asked Questions
Can I use it to make a dental in-print?
It is non-toxic but it is not approved for FDA-type applications like food contact or internal use.
What materials can you fill the mold with?
All common casting materials like plaster, epoxy resin, concrete and even our moldable plastic material.
Does it resist heat?
It is made of silicone so it can resist heat to 450 degrees F.
Do you need a release agent?
No.
How much is the 1/2 lb. size?
It will approximately cover an area 1/4" by 7" by 8".
How long does it take to cure?
Generally less than 10 minutes, depending on room conditions.
Are the molds reusable?
The molds harden and are reusable for creating multiple moldings.
10. Cast-A-Mold 25T Silicone Rubber (1/2 Gallon)
Feature
High StrengthPourable
Accurate Details
Same Day Shipping
Virtually Odorless
Description
RTV Silicone Mold Making Rubber for Resin CastingCast-A-Mold 25T is a general purpose rtv silicone elastomer which exhibits excellent tear strength, long library life, and accurate detail reproduction. Cast-A-Mold 25T is a condensation cured silicone (tin catalyzed ) It is used to make rubber molds that can be used to cast polyurethanes, epoxy's, polyester's, cement, concrete, soap, wax, plaster, etc.. It is easy to mix and de-air, and will cure at room temperature over virtually any surface. Cast-A-Mold 25T is extremely useful for applications where superior physical properties are required.
Properties:
Product: Cast-A-Mold 25T
Mix Ratio: 10:1 by weight
Working Time: 3.0 hours
Demold Time: 16 hour
Heat Deflection: 300 f +
Tensile Strength, psi: 660
Elongation %: 390
Tear Resistance, ppi: 140
Color: Green
Hardness: A-25
Viscosity: 40,000 cps
We typically ship same day when orders are received by 2 pm EST Monday-Friday
