Finding the best cb antenna no drill suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best cb antenna no drill
1. Comet Antennas CVANTPF Vehicle Specific Fender Bracket Antenna Mount (No Holes to Drill) for Chevrolet/GMC Trucks
Feature
Drivers side installation only.Uses the existing fender bolt, the bracket fits between the hood and fender gap.
3/4 hole accepts the standard NMO mount, or choose a Comet SO-239 type cable assembly which includes a large washer and jam nuts to keep the 5/8 SO-239 from falling through the 3/4 hole.
Note: For stability, our brackets are made of 14 gauge stainless steel. Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place. The Larsen NMOK mount does not have any problem.
Fits these vehicles: Chevrolet Avalanche 2007-2013, Silverado 1500: 2007-2013, Silverado 2500, 3500: 2007-2014, Suburban 2007-2013, Tahoe 2007-2013 GMC Sierra 1500: 2007-2013, Sierra 2500, 3500: 2007-2014, Yukon and Denali: 2007-2014
Description
Vehicle specific fender bracket, no holes to drill.Drivers side installation only.
Uses the existing fender bolt, the bracket fits between the hood and fender gap.
3/4 hole accepts the standard NMO mount
You can also use the bracket to attach an antenna that uses a PL-259 connector. Choose a Comet SO-239 type cable assembly, it includes a large washer and jam nuts to keep the 5/8 SO-239 from falling through the 3/4 hole in the bracket.
Note: For stability, our brackets are made of 14 gauge stainless steel. Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place. The Larsen NMOK mount does not have any problem.
Fits these vehicles:
ChevroletAvalanche 2007-2013
Silverado 1500: 2007-2013
Silverado 2500, 3500: 2007-2014
Suburban 2007-2013
Tahoe 2007-2013
GMC
Sierra 1500: 2007-2013
Sierra 2500, 3500: 2007-2014
Yukon and Denali: 2007-2014
2. Magnetic Antenna Mounting Plate for 2015+ Ford F150 Aluminum Body Trucks-NO Drilling Required
Feature
Install antennas on 2015+ Ford F150 aluminum body trucks without drilling any holes.Built in Texas and is ideal for magnetic CB antennas radio antennas and other gear with antennas.
Installed via the rear cab lights - Has a weatherproof seal.
This mount will fit several magnetic antennas depending on the size of the antennas.
Description
The VMP-MAM-F150-2015 from Larson Electronics is a Magnetic Antenna Mounting Plate that allows operators to install up to four antennas on their 2015 and newer Ford F150 aluminum body trucks without drilling any holes. This magnetic antenna mounting plate is ideal for law enforcement DOT workers and anyone else who needs to easily mount an antenna but doesn't want to drill holes in their truck. This lightweight mounting plate allows operators to mount antennas on their trucks without drilling into the body of the truck itself. This mounting plate can support antenna arrays of up to 20 lbs. The VMP-MAM-F150-2015 features a steel plate to accomodate antennas with magnetic bases and is compatible with 2015+ Ford F-150 aluminum body pickup trucks.3. Comet Antennas SDANTPF Vehicle Specific Fender Bracket Antenna Mount (No Holes to Drill) for Ford Trucks
Feature
Drivers side installation only.Uses the existing fender bolt, the bracket fits between the hood and fender gap.
3/4 hole accepts the standard NMO mount, or choose a Comet SO-239 type cable assembly which includes a large washer and jam nuts to keep the 5/8 SO-239 from falling through the 3/4 hole.
Note: For stability, our brackets are made of 14 gauge stainless steel. Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place. The Larsen NMOK mount does not have any problem.
Fits these vehicles: Ford F-250, F-350 SUPERDUTY: 2005-2010
Description
Vehicle specific fender bracket, no holes to drill.Drivers side installation only.
Uses the existing fender bolt, the bracket fits between the hood and fender gap.
3/4 hole accepts the standard NMO mount
You can also use the bracket to attach an antenna that uses a PL-259 connector. Choose a Comet SO-239 type cable assembly, it includes a large washer and jam nuts to keep the 5/8 SO-239 from falling through the 3/4 hole in the bracket.
Note: For stability, our brackets are made of 14 gauge stainless steel. Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place. The Larsen NMOK mount does not have any problem.
Fits these vehicles:
Ford
F-150: F-250, F-350 SUPERDUTY: 2005-2010
4. Comet Antennas DG2ANTPF Vehicle Specific Fender Bracket Antenna Mount (No Holes to Drill) for Dodge Trucks
Feature
Drivers side installation only.Uses the existing fender bolt, the bracket fits between the hood and fender gap.
3/4 hole accepts the standard NMO mount, or choose a Comet SO-239 type cable assembly which includes a large washer and jam nuts to keep the 5/8 SO-239 from falling through the 3/4 hole.
Note: For stability, our brackets are made of 14 gauge stainless steel. Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place. The Larsen NMOK mount does not have any problem.
Fits these vehicles: Dodge Ram 1500: 2009-2018, Ram 2500, 3500: 2010-2018, Ram Chassis Cab: 4500, 5500: 2011-2018
Description
Vehicle specific fender bracket, no holes to drill.Drivers side installation only.
Uses the existing fender bolt, the bracket fits between the hood and fender gap.
3/4 hole accepts the standard NMO mount
You can also use the bracket to attach an antenna that uses a PL-259 connector. Choose a Comet SO-239 type cable assembly, it includes a large washer and jam nuts to keep the 5/8 SO-239 from falling through the 3/4 hole in the bracket.
Note: For stability, our brackets are made of 14 gauge stainless steel. Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place. The Larsen NMOK mount does not have any problem.
Fits these vehicles:
Dodge
Ram 1500: 2009-2018
Ram 2500, 3500: 2010-2018
Ram Chassis Cab: 4500, 5500: 2011-2018
5. Comet Antennas SD2ANTPF Vehicle Specific Fender Bracket Antenna Mount (No Holes to Drill) for Ford Trucks
Feature
Drivers side installation only.Uses the existing fender bolt, the bracket fits between the hood and fender gap.
3/4 hole accepts the standard NMO mount, or choose a Comet SO-239 type cable assembly which includes a large washer and jam nuts to keep the 5/8 SO-239 from falling through the 3/4 hole.
Note: For stability, our brackets are made of 14 gauge stainless steel. Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place. The Larsen NMOK mount does not have any problem.
Fits these vehicles: Ford F-250, F-350 SUPERDUTY: 2011-2016
Description
Vehicle specific fender bracket, no holes to drill.Drivers side installation only.
Uses the existing fender bolt, the bracket fits between the hood and fender gap.
3/4 hole accepts the standard NMO mount
You can also use the bracket to attach an antenna that uses a PL-259 connector. Choose a Comet SO-239 type cable assembly, it includes a large washer and jam nuts to keep the 5/8 SO-239 from falling through the 3/4 hole in the bracket.
Note: For stability, our brackets are made of 14 gauge stainless steel. Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place. The Larsen NMOK mount does not have any problem.
Fits these vehicles:
Ford
F-150: F-250, F-350 SUPERDUTY: 2011-2016
6. Comet Antennas CV2ANTNCG Vehicle Specific Fender Bracket Antenna Mount (No Holes to Drill) for Chevrolet/GMC Trucks
Feature
Drivers side installation only.Uses the existing fender bolt, the bracket fits between the hood and fender gap.
3/4 hole accepts the standard NMO mount, or choose a Comet SO-239 type cable assembly which includes a large washer and jam nuts to keep the 5/8 SO-239 from falling through the 3/4 hole.
Note: For stability, our brackets are made of 14 gauge stainless steel. Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place. The Larsen NMOK mount does not have any problem.
Fits these vehicles: Chevrolet Silverado 1500: 2014 -2018 Silverado 2500, 3500: 2015 -2016 (You may need to trim a rubber weather strip for access to the fender bolt and proper fitting of the bracket. GMC Sierra 1500: 2014 -2018 Sierra 2500, 3500: 2015 -2018 (You may need to trim a rubber weather strip for access to the fender bolt and proper fitting of the bracket.
Description
Vehicle specific fender bracket, no holes to drill.Drivers side installation only.
Uses the existing fender bolt, the bracket fits between the hood and fender gap.
3/4 hole accepts the standard NMO mount
You can also use the bracket to attach an antenna that uses a PL-259 connector. Choose a Comet SO-239 type cable assembly, it includes a large washer and jam nuts to keep the 5/8 SO-239 from falling through the 3/4 hole in the bracket.
Note: For stability, our brackets are made of 14 gauge stainless steel. Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place. The Larsen NMOK mount does not have any problem.
Fits these vehicles:
Chevrolet
Silverado 1500: 2014 -2018
Silverado 2500, 3500: 2015 -2016 (You may need to trim a rubber weather strip for access to the fender bolt and proper fitting of the bracket.
GMC
Sierra 1500: 2014 -2018
Sierra 2500, 3500: 2015 -2018 (You may need to trim a rubber weather strip for access to the fender bolt and proper fitting of the bracket.
7. Comet Antennas AVANTPF Vehicle Specific Fender Bracket Antenna Mount (No Holes to Drill) for Chevrolet Trucks
Feature
Drivers side installation only.Uses the existing fender bolt, the bracket fits between the hood and fender gap.
3/4 hole accepts the standard NMO mount, or choose a Comet SO-239 type cable assembly which includes a large washer and jam nuts to keep the 5/8 SO-239 from falling through the 3/4 hole.
Note: For stability, our brackets are made of 14 gauge stainless steel. Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place. The Larsen NMOK mount does not have any problem.
Fits these vehicles: Chevrolet Avalanche: 2004-2006; Silverado 1500, 2500, 3500: 2003-2006; Silverado Classic: 2007
Description
Vehicle specific fender bracket, no holes to drill.Drivers side installation only.
Uses the existing fender bolt, the bracket fits between the hood and fender gap.
3/4 hole accepts the standard NMO mount
You can also use the bracket to attach an antenna that uses a PL-259 connector. Choose a Comet SO-239 type cable assembly, it includes a large washer and jam nuts to keep the 5/8 SO-239 from falling through the 3/4 hole in the bracket.
Note: For stability, our brackets are made of 14 gauge stainless steel. Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place. The Larsen NMOK mount does not have any problem.
Fits these vehicles:
Chevrolet
Avalanche: 2004-2006
Silverado 1500, 2500, 3500: 2003-2006
Silverado Classic: 2007
8. Comet Antennas FOANTPF Vehicle Specific Fender Bracket Antenna Mount (No Holes to Drill) for Ford Trucks
Feature
Drivers side installation only.Uses the existing fender bolt, the bracket fits between the hood and fender gap.
3/4 hole accepts the standard NMO mount, or choose a Comet SO-239 type cable assembly which includes a large washer and jam nuts to keep the 5/8 SO-239 from falling through the 3/4 hole.
Note: For stability, our brackets are made of 14 gauge stainless steel. Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place. The Larsen NMOK mount does not have any problem.
Fits these vehicles: Ford F-150: 2005-2008
Description
Vehicle specific fender bracket, no holes to drill.Drivers side installation only.
Uses the existing fender bolt, the bracket fits between the hood and fender gap.
3/4 hole accepts the standard NMO mount
You can also use the bracket to attach an antenna that uses a PL-259 connector. Choose a Comet SO-239 type cable assembly, it includes a large washer and jam nuts to keep the 5/8 SO-239 from falling through the 3/4 hole in the bracket.
Note: For stability, our brackets are made of 14 gauge stainless steel. Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place. The Larsen NMOK mount does not have any problem.
Fits these vehicles:
Ford
F-150: 2005-2008
9. Comet Antennas SUANTPF Vehicle Specific Fender Bracket Antenna Mount (No Holes to Drill) for Chevrolet/GMC Trucks
Feature
Drivers side installation only.Uses the existing fender bolt, the bracket fits between the hood and fender gap.
3/4 hole accepts the standard NMO mount, or choose a Comet SO-239 type cable assembly which includes a large washer and jam nuts to keep the 5/8 SO-239 from falling through the 3/4 hole.
Note: For stability, our brackets are made of 14 gauge stainless steel. Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place. The Larsen NMOK mount does not have any problem.
Fits these vehicles: Chevrolet Silverado 1500, 2500, 3500: 2000-2002, Suburban: 2000-2005 GMC Sierra 1500,2500,3500: 2001-2006, Sierra Classic: 2007
Description
Vehicle specific fender bracket, no holes to drill.Drivers side installation only.
Uses the existing fender bolt, the bracket fits between the hood and fender gap.
3/4 hole accepts the standard NMO mount
You can also use the bracket to attach an antenna that uses a PL-259 connector. Choose a Comet SO-239 type cable assembly, it includes a large washer and jam nuts to keep the 5/8 SO-239 from falling through the 3/4 hole in the bracket.
Note: For stability, our brackets are made of 14 gauge stainless steel. Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place. The Larsen NMOK mount does not have any problem.
Fits these vehicles:
Chevrolet
Silverado 1500, 2500, 3500: 2000-2002
Suburban: 2000-2005
GMC
Sierra 1500,2500,3500: 2001-2006
Sierra Classic: 2007
10. Accessories Unlimited AUJ2K Jeep HD Spare Tire Antenna Mount with 18 ft. Coax
Feature
Manufactured to the Highest Quality Available.With True Enhanced Performance.
Latest Technical Development.
