Finding the best battery clock movement kits suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best battery clock movement kits
1. Creative Hobbies Quartz Clock Motor Movement, C91MQS, 3/8 Inch Max Dial Thickness, 7/16 Inch Threaded Shaft Length, Complete Kit
Feature
Includes everything needed to repair, replace, or make your own DIY clock project!Accurate to 2 minutes a year and runs up to 2 years on one AA Battery (not included)
Includes hardware, hanger, 3" gold hands.
Measures 2-1/8" Square x 5/8" thick with 5/16" diameter shaft for 3/8" hole.
We are a USA owned, based and operated business 100%!
Description
Creative Hobbies Quartz Clock Motor Movement Kit includes everything needed to repair, replace, or make your own DIY clock project! Accurate to 2 minutes a year and runs up to 2 years on one AA Battery (not included). Includes hardware, hanger, 3" gold hands. Measures 2-1/8" Square x 5/8" thick with 5/16" diameter shaft for 3/8" diameter hole. USA owned, based and operated business 100%!2. Mudder Quartz Clock Movement with Hands to Fit Dials up to 40 cm/ 15.7 Inches in Diameter (Shaft Length 3/5 inch/15mm)
Feature
Measurement: hand length: total hour hand length: approx. 172 mm (6.8 inches); Total minute hand length: approx. 207 mm (8.1 inches); Second caps: approx. 7 mm (0.3 inch)Size: total shaft length: 15 mm (3/ 5 inch); Thread length: 6.7 mm (7/ 25 inch); Jump second movement, suitable for 1 - 4 mm (1/ 24 - 4/ 25 inch) thickness clock panel
Wide application: they are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable for DIY quartz wall clock replacement movement parts, etc.
Good DIY clock supply: suitable for repairing, replacing the broken parts of a clock or serving as good handwork material to make a clock by yourself
Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent
Description
Mudder quartz clock movement with hands to fit dials up to 40 cm/ 15.7 inches in diameter
DIY supply:
This item is suitable for repairing, replacing the broken parts of a clock or making a clock by yourself.
Application range:
The jump second movement are suitable for different thickness clock panel, and fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable for DIY quartz wall clock
Note:
Please do not install the minute hand and hour hand with too much pressure or they will be bent.
Specification:
Color: black
Material: plastic and aluminum
Power: 1.5 V AA battery (not included)
Dimensions:
Case size: approx. 55 x 55 x 16 mm (2.2 x 2.2 x 0.65 inches)
Total hour hand length: approx. 172 mm (6.8 inches)
Total minute hand length: approx. 207 mm (8.1 inches)
Second caps: approx. 7 mm (0.3 inch)
Package included:
1 x Quartz clock movement
1 x Second caps
1 x Minute hand
1 x Hour hand
1 x Plastic washer
1 x Brass washer
1 x Brass nut
3. Include Hands Quartz DIY Wall Clock Movement Mechanism Battery Operated DIY Repair Parts Replacement
Feature
.Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock.Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions.
.Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.
.Parameter: "I" Shaft,drive long clock hands (10 mm to 450 mm); Total shaft length is 18.4 mm (23/32 inches), thread length is 6 mm (6/25 inches).
.High Torque "I" Shaft Clock Movement: suitable for 1 - 4 mm (1/ 25 - 5/32 inches) thickness clock panel.
Description
Features:Easy and simple design
Suitable for repairing, replacing or making a clock
Material: plastic and aluminum
Second hand motion: Sweep
Accuracy Within 30seconds deviation each month (in normal temperature)
Battery: one 1.5V Carbon-zinc batteries only,not included.
Please DO NOT USE Alkaline battery,Rechargeable batteries,they will damage the movement.
Dimensions:
Case size: approx. 55 x 55 x 16 mm (2.2 x 2.2 x 0.65 inches)
Total hour hand length: approx. 143 mm (5.6inches)
Total minute hand length: approx. 184mm (7.2inches)
Second caps: approx. 6 mm (0.24 inches)
Package included:
1 x Quartz clock movement
1 x Second caps
1 x Minute hand
1 x Hour hand
1 X Plastic washer
1 X Brass washer
1 X Brass nut
1 x Metal hook
**Young town manufactures the 12888 series in various models, this specific model is the 12888SMO. Please check the dimensions of this movement prior to purchase to verify the dimensions.
4. Mudder High Torque Clock Replacement Movement, 1/2 Inch Maximum Dial Thickness, 9/10 Inch Total Shaft Length (Shaft Length 9/10 Inch/ 23 mm, Black)
Feature
High torque clock with hook, I shaft, drive long clock hands (10 mm to 450 mm)Totalshaftlength:23mm(9/10inches),threadlength:15.4mm(3/5inches),suitablefor9-13mm(9/25-1/2inches)thicknessclockpanel
Handslength:totalhourhandlength:approx.75mm(3.0inches);Totalminutehandlength:approx.104mm(4.1inches);Totalsecondhandlength: approx.136mm(5.3inches)
Clock replacement set: includes a movement with hook, 3 black clock hands, mounting hardware
Range of use: suitable for repairing, replacing or making a clock; Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.
Description
Mudder High Torque Clock Replacement Movement, 1/ 2 Inch Maximum Dial Thickness, 9/ 10 Inch Total Shaft Length
Features:
Total shaft length is 23 mm and its thread length is 15.4 mm, applicable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel.
Application:
Use to repair, replace or make a clock, suitable for cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.
Easy and simple design:
The component parts easy to assemble together and the black metal hands may be painted any color to match your clock.
Specifications:
Material: plastic and aluminum
Case size: approx. 55 x 55 x 16 mm (2.2 x 2.2 x 0.65 inches)
Total shaft length: 23 mm (9/ 10 inches)
Thread length: 15.4 mm (3/ 5 inches)
Total hour hand length: approx. 75 mm (3.0 inches)
Total minute hand length: approx. 104 mm (4.1 inches)
Total second hand length: approx. 136 mm (5.3 inches)
Power: 1.5V AA 1 x battery (not included)
Package includes:
1 x Quartz clock movement
1 x Second hand
1 x Minute hand
1 x Minute nut
1 x Hour hand
1 x Plastic washer
1 x Brass washer
1 x Brass nut
Warmnotice:
Therearesomeclockpartsmadeofaluminum,pleasedonotinstallthemwithtoomuchpressureortheywillbebent.
5. Vangold Quartz Wall Clock Movement Mechanisms with Hands Battery Powered Clock Kit for DIY Clock Replacement(2-Year Warranty) (Black)
Feature
2 Years warranty and 30 days money back. If the product has any problems, you can get a free replacement WITHOUT a returnYoung town produces the 12888 series with different models, please compare the detail dimensions between your old one and this one before order.
Long spindle quartz clock replacement mechanism comes with the hour and minute hands, metal hook, which is perfect for repaiting or making a clock.
Total shaft length is 18mm (0.71"), thread length is 6.5mm (0.26");and the shaft can drive long clock hands (10mm to 450mm).
This high torque clock movement is suitable for 1-4mm (0.04"-0.16")thickness clock dial.
6. Walnut Hollow 3 Piece Clock Kit 3/4-inch
Feature
Walnut HOLLOW-Quartx clock movementsThe clock movements offer watchmaker's accuracy and dependability
They are suitable for repair or restoration of all kinds of clocks from mantel clocks to cuckoo clocks to simple wall clocks
Create your own unique timekeeper with a walnut hollow wood clock surface (not included)
This package contains one quartz clock assembly: movements for surfaces 3/4in thick three hands and self-adhesive numbers
Ideal replacement parts for your treasured clock
Design and make your own clock
Includes gold colored hands and numerals
Quartz clock movement (needs AA battery which is not included)
Comes with full assembly instructions
Description
Walnut HOLLOW-Quartx clock movements. The clock movements offer watchmaker's accuracy and dependability. They are suitable for repair or restoration of all kinds of clocks from mantel clocks to cuckoo clocks to simple wall clocks. Create your own unique timekeeper with a walnut hollow wood clock surface (not included). This package contains one quartz clock assembly: movements for surfaces 3/4in thick three hands and self-adhesive numbers. Requires one aa battery (not included). Imported.7. Hicarer High Torque Quartz Clock Movement Replacement Parts with 208 mm/ 8.2 Inches Long Spade Hands and Hanger (20 mm (4/5 inches))
Feature
Parameter of the kit: I shaft, high torque clock mechanism, drive long clock hands from 10 mm to 450 mmMovement size: suit for 4 - 8 mm (4/ 25 - 3/ 10 inches) thickness clock panel, the total shaft length is 20 mm (4/ 5 inches), thread length is 11.7 mm (9/ 20 inches)
Size from center of the hole to tip: the hour hand is 154 mm/ 6.1 inch; Minute hand is 208 mm/ 8.2 inch; Second caps is 7 mm/ 0.28 inch
Material and note: the clock pointer is made of aluminum, please do not use too much pressure to avoid bending, please check the size before purchase
Package contents: a clock movement with hook, 2 hands and some mounting hardware, come with the specially designed protect cardboard box and instructions
Description
High torque quartz clock movement replacement parts with 208 mm/ 8.2 inches long hands and hanger
Wide application:
These clock movements are function as good tools for DIY design, have the clock designed and made by yourself;
Suit for repairing, replacing the damaged clock or making a new one;
Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock and more.
Specification:
Material: plastic and aluminum
Power: 1 x 1.5 V AA battery (not included)
Case size: approx. 55 x 55 x 16 mm/ 2.2 x 2.2 x 0.63 inches
Total hour hand length: approx. 187 mm/ 7.4 inches
Total minute hand length: approx. 260 mm/ 10.2 inches
Second hand: approx. 7 mm/ 0.28 inches
Package includes:
1 x Quartz clock movement
1 x Second caps
1 x Minute hand
1 x Hour hand
1 x Plastic washer
1 x Brass washer
1 x Brass nut
1 x Metal hook
8. Mudder Clock Movement Mechanism, 3/ 25 Inch Maximum Dial Thickness, 1/ 2 Inch Total Shaft Length
Feature
Suitable for repairing, replacing or making a clockQuartz clock movement mechanism repair tool
Applicable to cross-stitch, three-dimensional embroidery, craft clock, etc.
Movement shaft: 13.5 mm, thread length 6 mm
Mute scanning movement, suitable for 1 - 3 mm thickness clock panel
Description
Kindly note: the product has 3 hands. The second hand has a brass cap, instead of the minute nut. For the 8th tip in the instruction, lightly screw minute nut in place can mean that if the product has the second hand, this minute nut or brass cap needn't. Please note that our package does not include the minute nut. Features: quiet silent mode, easy and simple design, suitable for repairing, replacing or making a clock, material: plastic and aluminum, power: 1.5V AA battery (not included). Dimensions: case size: approx. 55 X 55 x 16 mm (2.2 X 2.2 X 0.65 inches), hour hand whole length: approx. 82 mm (3.2 inches), minute hand whole length: approx. 105 mm (4.1 inches), second hand whole length: approx. 120mm (4.75 inches). Package included: 1 x quartz clock movement, 1 x second hand, 1 x minute hand, 1 x hour hand, 1 x plastic washer, 1 x brass washer, 1 x brass nut.9. Mudder High Torque Long Shaft Clock Movement with 2 Hands to Fit Dials up to 51.6 cm/ 20 Inches in Diameter (Shaft Length 9/10 Inch/ 23 mm)
Feature
Wall clock movement replacement: high torque clock with hook,long shaft, drive long clock hands (10 mm to 450 mm)Movement size: total shaft length: 23 mm (9/ 10 inches), thread length: 15.4 mm (3/ 5 inches), suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel
Center of hole hand size: hour hand is approx. 154 mm (6.1 inch); Minute hand is approx. 208 mm (8.2 inch); Second caps is approx. 7 mm (0.28 inch)
Wide application: they are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable for DIY quartz wall clock replacement movement parts, etc.
Warm notice: when you install it, please keep the hour hand and minute hand parallel
Description
Mudder high torque clock long shaft clock movement with 2 hands to fit dials up to 51.6 cm/ 20 inches in diameter
Wide application:
These clock movements function as good tools for DIY design, and they are suitable for repairing, replacing the old damaged clock or making a new one; Moreover, they are applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock and more.
Specification:
Material: plastic and aluminum
Power: 1.5 V AA 1 x battery (not included)
Dimensions:
Case size: approx. 55 x 55 x 16 mm (2.2 x 2.2 x 0.65 inches)
Total hour hand length: approx. 187 mm (7.4 inches)
Total minute hand length: approx. 260 mm (10.2 inches)
Second hand: approx. 7 mm (0.28 inches)
Package includes:
1 x Quartz clock movement
1 x Second caps
1 x Minute hand
1 x Hour hand
1 x Plastic washer
1 x Brass washer
1 x Brass nut
1 x Metal hook
10. Mudder 24.6 mm/ 1.0 Inches Thread Length Long Spindle Quartz Clock Movement with 2 Hands for Dials up to 21 mm/ 0.8 Inches Thick
Feature
Movement size: shaft length is 31 mm (1-1/ 5 inch); Thread length is 24.6 mm (24/ 25 inch); Jump second movement, suitable for 16 - 21 mm (5/ 8 - 4/ 5 inch) thickness clock panelCenter of hole hand size: hour hand is approx. 82 mm (3.2 inch); Minute hand is approx. 117 mm (4.6 inch); Second caps is approx. 7 mm (0.3 inch)
Wide application: you can enable to use it to repair, replace or make a clock; Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.
Package: come with mudder specially designed blister cardboard box and instructions, convenient to carry and use
Warm notice: when you install it, please keep the hour hand and minute hand parallel
Description
Mudder 24.6 mm thread length long spindle quartz clock movement with 2 hands for dials up to 21 mm thick
Compatible clock:
The quartz clock mechanism is applicable to cross-stitch, craft clock, frameless draw clock, three-dimensional embroidery, etc..
Size:
Total shaft length is 31 mm (1-1/ 5 inch); Thread length is 24.6 mm (24/ 25 inch); Jump second movement, suitable for 16 - 21 mm (5/ 8 - 4/ 5 inch) thickness clock panel.
Simple design and easy to use:
Long spindle quartz clock replacement movement parts with metal hook, convenient to install and use.
Useful clock replacement parts:
Suitable for repairing, replacing or making a clock. (Warm notice: when you install it, please keep the hour hand and minute hand parallel)
Specifications:
Material: plastic and aluminum
Power: 1 x 1.5 V AA battery (not included)
Dimensions:
Case size: approx. 55 x 55 x 16 mm (2.2 x 2.2 x 0.65 inch)
Total hour hand length: approx. 115 mm (4.5 inch)
Total minute hand length: approx. 156 mm (6.0 inch)
Second cap size: approx. 7 mm (0.3 inch)
Package includes:
1 x Quartz clock movement
1 x Second cap
1 x Minute hand
1 x Hour hand
1 x Plastic washer
1 x Brass washer
1 x Brass nut
1 x Metal hook
