We spent many hours on research to finding rebar rod, reading product features, product specifications for this guide. For those of you who wish to the best rebar rod, you should not miss this article. rebar rod coming in a variety of types but also different price range. The following is the top 10 rebar rod by our suggestions:
Best rebar rod
1. Apex Tool Group RB4 HK 3/8-Inch No.3 and 1/2-Inch No.4 Extendable Indexing Rebar Bender, Red/Black
Feature
Dual use head allows bending for both 3/8-Inch and 1/2-Inch rebar (No3 and No4)Pushbutton extends bender to 35-Inch for maximum leverage; collapses to just 21-Inch for convenient storage and portability
14-position indexing head adjusts with center pushbutton to allow total access for maximum leverage
Extra-sturdy steel handles for the toughest conditions
Super-strong indexing head grips rebar securely for accurate bends
Description
The new extendable indexing rebar bender. Like a hickey bar on steroids. Massive Power. Because you angle the head for the best leverage. Has a rock-solid 14-position indexing head that adjusts to give you the best leverage for every bend, so you get maximum power with less effort. Take the pain out of small bending jobs with the HK Porter extendable indexing rebar bender. Convenient, strong and built to get the job done fast.2. Rebar Tier Tying Machine Automatic Steel Bar Rod Tying Binding Tool Handheld Electric Tying Tools 30-60mm Tying Range
Feature
Rebar Tier is a hand held machine used to pack rebars quickly, It can save 3-5 times than man power by hand.The Tying Machine is used for building market, including civil building, floor pipe, heating floor mesh, steel bar, etc.
Applicable Scope Of Steel Strapping: 30mm - 60mm, Knot Wire Length: 40cm and above
Reasonable structure, advanced craft, simple and convenient operation, high efficiency and convenient maintenance.
Package list: 1X Tying Machine, 1X Pliers, 1X Charger,1X Storage Box, 2X Lithium Ion Batteries, 2X Tying Wire (Tying Wire Standard: About 0.8 mm x 110 m/roll)
Description
SpecificationsColor: Orange
Material: Plastic + Metal
Voltage: 12V
Battery: 12V Lithium Ion Batteries
Battery Capacity: 13200 Mah
Battery Charging Time: 1.5 hours full filling
Tying Wire Diameter: 0.8mm
Tying Wire Length: more than 110 m
Applicable Scope Of Steel Strapping: 30mm - 60mm
Knot Wire Length: 40cm and above
Knot Number Per Charge: 3000 times
Knot The Required Time: 0.8 seconds at a time
Cable Length: 95cm / 37.40''(appr.)
Box Size: (L)X(W)X(H) 42X30X10cm / 16.54''X11.81''X3.94''(appr.)
Machine Size: 290 mm * 65 mm * 195 mm / 11.42''x2.56''x7.68''(appr.)
Operation Instructions
1. The rebar tirer's jaws are stuck to the intersection of the steel bars, and the steel bars are hooked at 45 degree angles. Note: There can be no barrier between the mouth of the jaws and the wire.
2. Press the start switch, the rebar tirer machine carries on the work (spins, hinges tightly, cuts off) Note: Press one button at a time, do not probe the jaws at work.
3. When automatic completion, the jaw from the steel bar intersection and then pull back, complete the process and prepare for the next binding.
4. When the binding process is not completed, do not unplug the machine in advance, otherwise it will cause the bundling of the goods tied skidding.
Operating Skills
1. In use, the left tilt 45 degrees after banding, the next time the banding into a right tilt 45 degrees banding, left and right alternately banding.
2. When the machine is about to tighten, the machine will appear slightly shaking, while holding the hand of the machine not too tight, you can relax properly.
Package included:
1X Tying Machine
1X Pliers
1X Charger
1X Storage Box
2X Lithium Ion Batteries
2X Tying Wire (0.8 mm x 110 m/roll)
3. Rebar Tier Tying Machine Automatic Steel Bar Rod Tying Binding Tool Handheld Electric Tying Tools with 2 Rolls of Tying Wires for free (Tying range: 30-60mm)
Feature
Rebar Tier is a hand held machine used to pack rebars quickly, It can save 3-5 times than man power by hand.Used for building market, including civil building, floor pipe, heating floor mesh, steel bar, etc.
Reasonable structure, advanced craft, simple and convenient operation, high efficiency and convenient maintenance.
Applicable Scope Of Steel Strapping: 30mm - 60mm, Knot Wire Length: 40cm and above
1 YEAR WARRANTY: If you have any issues with this product, please feel free to contact us
Description
SpecificationsColor: Orange
Material: Plastic + Metal
Voltage: 12V
Battery: 12V Lithium Ion Batteries
Battery Capacity: 13200 Mah
Battery Charging Time: 1.5 hours full filling
Tying Wire Diameter: 0.8mm
Tying Wire Length: more than 110 m
Applicable Scope Of Steel Strapping: 30mm - 60mm
Knot Wire Length: 40cm and above
Knot Number Per Charge: 3000 times
Knot The Required Time: 0.8 seconds at a time
Cable Length: 95cm / 37.40''(appr.)
Box Size: (L)X(W)X(H) 42X30X10cm / 16.54''X11.81''X3.94''(appr.)
Machine Size: 290 mm * 65 mm * 195 mm / 11.42''x2.56''x7.68''(appr.)
Operation Instructions
1. The rebar tirer's jaws are stuck to the intersection of the steel bars, and the steel bars are hooked at 45 degree angles. Note: There can be no barrier between the mouth of the jaws and the wire.
2. Press the start switch, the rebar tirer machine carries on the work (spins, hinges tightly, cuts off) Note: Press one button at a time, do not probe the jaws at work.
3. When automatic completion, the jaw from the steel bar intersection and then pull back, complete the process and prepare for the next binding.
4. When the binding process is not completed, do not unplug the machine in advance, otherwise it will cause the bundling of the goods tied skidding.
Operating Skills
1. In use, the left tilt 45 degrees after banding, the next time the banding into a right tilt 45 degrees banding, left and right alternately banding.
2. When the machine is about to tighten, the machine will appear slightly shaking, while holding the hand of the machine not too tight, you can relax properly.
Package included:
1X Tying Machine
1X Pliers
1X Charger
1X Storage Box
2X Lithium Ion Batteries
2X Tying Wire (0.8 mm x 110 m/roll)
4. Morris Products 91610 Heavy Duty Ground Clamp, 1/2 - 1" Pipe Range, 3/8 - 1" Rebar Range, 8 - 4/0 Wire Range
Feature
Heavy Duty Ground Clamps - Heavy Duty Ground Clamps can be buried in earth or concreteHeavy Duty Ground Clamps are used to Connect Grounding Conductor to Water Pipe, Ground Rods, Copper Tubing or Rebar up to 1" in diameter
Can Accomodate #8 Through 4/0 Gound Conductor can handle just about any size ground wire & just about any application
Cast of High Strength High Conductivity Copper
Supplied with Stainless Steel Set Screws
Description
Suitable for Direct Burial in Earth & Concrete. Provides Maximum Conductivity & Strength. Direct Burial marked on clamps. UL467 Listed for Direct Burial and Grounding Bonding Applications. cULus.5. KAKA Industrial MS-28 28mm Metal Manual Shears, Solid Construction and Versatility, Rebar, Rod Steel Cutter, Flat Bar Steel, Round Metal Cutter
Feature
MULTIPLE MATERIAL CUTTING CAPACITY. KAKA Industrial 28mm manual hand shear is designed to cut different kinds of materials, such as rebar, rod steel, square steel and flat steel. Multiple cutting can be done within one machineEFFORTLESS CUTTING AND EASY OPERATION. This manual shear is manually operated, which means you have the greatest flexibility to change any settings. Also, the metal shear can bolt to bench, table or the ground, which leave you with more adjustability
GREAT CAPACITY IS GUARANTEED. This metal shear can cut 1.1-Inch round steel, 1.5x0.4-Inch flat steel and 1x1-inch square steel
MORE LEVERAGE WILL BE ENSURED WITH THE LONG HANDLE. The 28mm metal shear has a 54-inch handle that is package separately. The long handle will make the cutting more effortless especially when you have a back pain, you do not need to always bend your back when every time you cut a subject
HARDENED HIGH CARBON STEEL BALDE AND SOLID STEEL FRAME SAFEGUARDS THE LONG TERM USE. KAKA Industrial 28mm manual metal shear is built with heavy material and a solid cast-iron frame. Stability and safety can be guaranteed during the cutting. Also, it has the hardened high carbon steel blade will save you average 10% on replacing the blades
Description
KAKA Industrial MS-28 metal shear is a heavy duty portable bench top hand shear that can cut up to 1-inch in terms of metal plate, round steel and flat bar. With an extended handle for more leverage, this metal shear can cut the subject like a butter.One benefit of this metal shear is that it can cut multiple materials in lieu of sheet metal, round steel, rebar and flat steel. The cutting capacity is 1.1-Inch for round steel, 1.5x0.4-Inch for flat steel and 1.1x1.1-Inch for square steel. Another benefit is that this metal shear not only equips a solid steel frame can be used for many year and increase the stability and safety at the same time, it also has the hardened carbon steel blade that will save you 10% average in replacing them. You just cannot miss such a great metal shear cutter!
Specifications
Model: MS-28
Round Steel: 1.1-Inch(28mm)
Flat Steel: 1.5x0.4-Inch(40x12mm)
Square Steel: 1x1-Inch(24x24mm)
Handle Length: 53.5"
Weight: 86 lb
Warranty: 1-Year
Stand Accessory: Steel Handle
About Delivery: The handle for the machine is seperated packed because of the length limited. So we will delivery TWO package for each product. If you have special requirments, please let we know when you confirm order. Thanks.
1.Kaka Industrial will accept returns on any unopened product within 30 days of the original ship date.
2.Day acceptance period from date of delivery. Damage claims and order discrepancies will not be accepted after this time.
3.You must obtain a Kaka Industral issued RGA number PRIOR to returning any materials.
4.Returned materials must be received at Kaka Industrial in new condition and in original packaging.
5.Altered items are not eligible for return.
6.Buyer is responsible for all shipping charges.
7.A 15% re-stocking fee applies to all returns.
6. Mophron Rebar Tying Machine 6-25mm Automatic Steel Bar Rod Tying Tools 13200mah Lightweight Handheld Tier Binding 12V Rechargeable Electric Tools
Feature
PRODUCTS SPECIFICATIONWire diameter-0.8mm, Wire length: 120M/per roll, Rope range-6mm~25mm, Battery capacity-13200mah, Voltage-12V, Working Hour: 3 hours/per battery, Charging Time: 2 hours. Product weight: 6.61 lb;TOTALLY AUTOMATICEasily to handle, Completely automatic finish all the steps of steel bar rod banding work,can save 3-5 times than man power by hand;
LONG WORKING TIMEHigh capacity lithium battery, Working hour last 3 hours at least. One spare battery FOR FREE;
DETAILS MAKE PERFECTSharp cutting edge more stable and durable,Strapping tightness can be adjusted, suit for variety of working conditions.Easy to replace wire by a switch;
WIDELY APPLICATIONSuitable for rebar tying machine in building market:including civil building, steel bar tying, floor pipe, heating floor mesh, steel bar, etc.
Description
Easy Handle Automatic Rebar Tying Tools
Rebar tying machine is a hand-held battery type steel bar fast binding tool. Instead of manually tying the steel bars. The steel bar binding machine is mainly composed of a body, a special reel, a battery box and a charger.
Specifications:
Voltage: 12V
Battery: Lithium Ion Batteries
Battery Capacity: 13200 Mah
Battery Charging Time: 3 hours full filling
Tying Wire Diameter: 0.8mm
Tying Wire Length: more than 120 m
Knot The Required Time: 0.8 seconds at a time
Machine Size: 450 mm * 320 mm * 130 mm / 17.71''x12.59''x5.11''
Operation Instructions:
5.The rebar tirer's jaws are stuck to the intersection of the steel bars, and the steel bars are hooked at 45 degree angles. Note: There can be no barrier between the mouth of the jaws and the wire.
6.Press the start switch, the rebar tirer machine carries on the work (spins, hinges tightly, cuts off) Note: Press one button at a time, do not probe the jaws at work.
7.When automatic completion, the jaw from the steel bar intersection and then pull back, complete the process and prepare for the next binding.
8.When the binding process is not completed, do not unplug the machine in advance, otherwise it will cause the bundling of the goods tied skidding.
Operating Skills:
3.In use, the left tilt 45 degrees after banding, the next time the banding into a right tilt 45 degrees banding, left and right alternately banding.
4.When the machine is about to tighten, the machine will appear slightly shaking, while holding the hand of the machine not too tight, you can relax properly.
Package included:
1 X Tying Machine
1 X Operation Manual
1 X Pliers
1 X Charger
2 X Lithium Ion Batteries
2 X Tying Wire (Tying Wire Standard: About 0.8 mm x 120 m/roll)
7. KAKA Industrial MS-20 20mm Sheet Metal Shears, and Versatility, Rebar and Rod Cutter, Steel Cutter, Flat Bar Steel, Round Steel Metal Cutter
Feature
SOLID STEEL FRAME WITH HARDENED HIGH CARBON STEEL BLADE. KAKA Industrial MS-20 manual hand shear has a very strong base steel frame, which will hold the stability during work. Also, this metal cutter is equipped with a high carbon steel blade, which can be served for long-time useCAN BE USED CUTTING MULTIPLE MATERIALS. This sheet metal manual shear is capable of cutting materials such as rebar, rod steel, square or flat steel. It gives great versatility when you choose to cut
GREAT CAPACITY THROUGHOUT CUTTING. This metal shear can cut 3/4-Inch round steel, 1.1"x0.3" flat steel; as for square steel, it can cut 3/4"x3/4". The cutting capacity will largely satisfy your work requirements
EASY OPERATION WITH EFFORTLESS CUTTING. The metal shear can bolt to bench or table; in a large extent, it makes the work more easier
LONG HANDLE ALLOWS MORE LEVERAGE. This metal shear comes with a long handle separately. The long handle will make the work more smooth and leave your back free when you are doing a cutting. It would be a smart purchase
Description
One advantage of this 3/4-inch sheet metal manual shear is that it can cut multiple materials, for example, rebar, rod steel, square steel and flat steel. Also, it is capable of slicing sheet metal, round steel and flat steel. Another benefit of this shear is that it has a hardened steel frame that comes with a high carbon steel blade. Not only can it satisfy your cutting requirement, but also it will save your money in the long-term perspective!Despite the versatility and high quality mentioned above, this metal cutting also has a benefit of effortless operation. The metal shear can bolt to a workbench or hard ground surface that make it more flexible. Meanwhile, the long handle comes with the metal shear also leaves more leverage when you are working, freeing your back with any damage. It is a great metal shear you deserve to have one!
Specifications
Model: MS-20
Round Steel: 3/4"(20mm)
Flat Steel: 1.1x0.3"(30x8mm)
Square Steel: 3/4x3/4"(18x18mm)
Handle Length: 53.5"
Weight: 37 lb
Warranty: 1-Year
Stand Accessory: Steel Handle
About Delivery: The handle for the machine is seperated packed because of the length limited. So we will delivery TWO package for each product. If you have special requirments, please let we know when you confirm order. Thanks.
1.Kaka Industrial will accept returns on any unopened product within 30 days of the original ship date.
2.Day acceptance period from date of delivery. Damage claims and order discrepancies will not be accepted after this time.
3.You must obtain a Kaka Industral issued RGA number PRIOR to returning any materials.
4.Returned materials must be received at Kaka Industrial in new condition and in original packaging.
5.Altered items are not eligible for return.
6.Buyer is responsible for all shipping charges.
7.A 15% re-stocking fee applies to all returns.
8. Rebar Tier Tying Machine Automatic Steel Bar Rod Tying Binding Tool Handheld Electric Tying Tools with 5 Rolls of Tying Wires for free (Tying range: 8-34mm)
Feature
Rebar Tier is a hand held machine used to pack rebars quickly, It can save 3-5 times than man power by hand.Used for building market, including civil building, floor pipe, heating floor mesh, steel bar, etc.
Reasonable structure, advanced craft, simple and convenient operation, high efficiency and convenient maintenance.
Applicable Scope Of Steel Strapping: 8mm - 34mm, Knot Wire Length: 300 - 500mm
1 YEAR WARRANTY: If you have any issues with this product, please feel free to contact us
Description
SpecificationsVoltage: 21V
Battery: Lithium Ion Batteries
Battery Capacity: 6600 Mah
Battery Charging Time: 1.5 hours full filling
Tying Wire Diameter: 0.8mm
Tying Wire Length: more than 110 m
Applicable Scope Of Steel Strapping: 8mm - 34mm
Knot Wire Length: 300 - 500mm
Knot Number Per Charge: 1500 times
Knot The Required Time: 0.8 seconds at a time
Machine Size: 285 mm * 64 mm * 220 mm / 11.22''x2.52''x8.66''(appr.)
Operation Instructions
1. The rebar tirer's jaws are stuck to the intersection of the steel bars, and the steel bars are hooked at 45 degree angles. Note: There can be no barrier between the mouth of the jaws and the wire.
2. Press the start switch, the rebar tirer machine carries on the work (spins, hinges tightly, cuts off) Note: Press one button at a time, do not probe the jaws at work.
3. When automatic completion, the jaw from the steel bar intersection and then pull back, complete the process and prepare for the next binding.
4. When the binding process is not completed, do not unplug the machine in advance, otherwise it will cause the bundling of the goods tied skidding.
Operating Skills
1. In use, the left tilt 45 degrees after banding, the next time the banding into a right tilt 45 degrees banding, left and right alternately banding.
2. When the machine is about to tighten, the machine will appear slightly shaking, while holding the hand of the machine not too tight, you can relax properly.
Package included:
1X Tying Machine
1X Pliers
1X Charger (we will send you the suitable adapter according to your location)
1X Storage Box
2X Lithium Ion Batteries
2X Tying Wire (Tying Wire Standard: About 0.8 mm x 110 m/roll)
9. 3/4" SDS-Max Shank Ground Rod Driver for 5/8 Inch and 3/4 Inch Ground Rods, Work with Bosch Dewalt Milwaukee Hilti and Other 3/4" Shank SDS-Max Rotary Hammers and Demolition Hammers
Feature
This ground rod driver is 3/4" SDS-Max shank. It is for SDS-Max hammers only. It does not fit into SDS-Plus hammers, Spline hammers and other system hammers. PLEASE CHECK YOUR TOOLS VERY CAREFULLY BEFORE PURCHASE.Industrial grade professional ground rod driver for 5/8" and 3/4" ground rods. One-piece design with proprietary heat-treatment process, fully hardened high quality steel body and thick metal walls meet the demands of frequent use and deliver increased life and durability
10"(250mm) long and 13/16"(20mm) diameter socket opening, 2-1/8"(54mm) deep inside the nest, accommodate ground rods up to 3/4" (19mm) in diameter. A taper on the bottom of the driver throat makes contact with the top of the ground rod. It helps to minimize the mushrooming of the rod versus a flat-bottom driver
Standard 3/4" SDS-Max shank is compatible with Bosch, Dewalt, Milwaukee, Hilti and all other brand SDS-Max system rotary hammers and demolition hammers
Fantastic work saver. It saves you a lot of pounding with a manual hammer. Heavy duty, high efficiency, precise and effortless, perfect for commercial and industrial applications. Product is packed in a handy transparent plastic tube that is durable and convenient to store and carry
Description
Professional 3/4" Shank SDS-Max Heavy Duty Ground Rod Driver for 5/8" and 3/4" Ground Rods
Attention: This ground rod driver is 3/4" SDS-Max shank. It is for SDS-Max hammers only. It does not fit into SDS-Plus hammers, Spline hammers and other system hammers. Please check your tools very carefully before purchase
Package Quantity: 1 piece
Product length: 10" (250mm)
Diameter socket opening: 13/16" (20mm), accommodate ground rods up to 3/4" (19mm) in diameter
Shank: 3/4 inch standard SDS-max shank
Material: Fully hardened high quality steel, One-piece design with proprietary heat-treatment process
Packaging: Transparent plastic tube that is handy, durable and convenient to store and carry
High quality industrial grade SDS-Max ground rod driver works perfectly with Bosch, Dewalt, Milwaukee, Hilti and other brand SDS-max system rotary hammers and demolition hammers. Fantastic work saver tool, practical design with durability and long life time, perfect for commercial and industrial applications. Ideal tool for installing ground rods, parking bumper stakes, etc
10. TR Industrial Ground Rod Driver, TR-One Shank for TR Industrial TR-100 and TR-300 Series Demolition Jack Hammers
Feature
Compatible with these TR Industrial Demolition Hammers accepting TR-One shank: TR-100 Series (TR89100, TR89105) and TR-300 Series (TR89300, TR89305, TR89307)Use as driver for soft ground rods up to 3/4 in
Enhance your demolition and chiseling job with this ground rod driver
Made with high-grade forged and heat treated steel for maximum durability
This bit does not fit Makita, Milwaukee, Bosch, Dewalt or Hitachi hammers
