Looking for a drywall anchors triple grip? Have a look at this 2019 guide!

The TOGGLER ALLIGATOR AF5 flanged anchor provides a secure hold in solid and hollow concrete, brick, stone, and drywall, includes #8 x 1-1/4" sheet metal screws for fastening, and is made in USA. Once inserted into a 3/16" drilled hole in a wall, ceiling, or floor, the anchor accepts an included screw. The anchor head is flanged for additional stability compared to a flush-mount head when installing into hollow material and has fins that grip the mounting material to prevent spinning when a screw is inserted. When installed within a solid material, the corrosion-resistant polypropylene body expands and elongates to fill and mold to the hole. This helps distribute the force evenly throughout its length to help prevent wall fracture. When installed within a hollow material or a solid material with unexpected cavities, the anchor's jaws open as a screw is inserted, locking the anchor and screw within the material. If using screws other than those supplied, the anchor accepts a #4 to #9 size screw with a thread length at least equal to the thickness of the item being fastened plus 1-3/16".

Specifications

Ultimate Tensile Strength Values

Ultimate Shear Strength Values

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.

Anchors provide reinforcement to fasteners installed in materials that are considered brittle or have insufficient hold such as drywall, concrete, brick, and stone. Anchors provide support through methods such as expansion from within or behind the substrate, or insertion of adhesive compounds into drilled holes.

TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.

Whats in the Box?

• (20) TOGGLER ALLIGATOR AF5 anchors
• (20) #8 x 1-1/4" sheet metal screws

The TOGGLER ALLIGATOR AF8 flanged anchor provides a secure hold in solid and hollow concrete, brick, stone, and drywall, includes #12 x 1-3/4" sheet metal screws, and is made in USA. Once inserted into a 5/16" drilled hole in a wall, ceiling, or floor, the anchor accepts an included screw. The anchor head is flanged for additional stability compared to a flush-mount head when installing into hollow material and has fins that grip the mounting material to prevent spinning when a screw is inserted. When installed within a solid material, the corrosion-resistant polypropylene body expands and elongates to fill and mold to the hole. This helps distribute the force evenly throughout its length to help prevent wall fracture. When installed within a hollow material or a solid material with unexpected cavities, the anchor's jaws open as a screw is inserted, locking the anchor and screw within the material. If using screws other than those supplied, the anchor accepts a #8 to #14 size screw with a thread length at least equal to the thickness of the item being fastened plus 1-13/16".

Specifications

Ultimate Tensile Strength Values

Ultimate Shear Strength Values

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.

Anchors provide reinforcement to fasteners installed in materials that are considered brittle or have insufficient hold such as drywall, concrete, brick, and stone. Anchors provide support through methods such as expansion from within or behind the substrate, or insertion of adhesive compounds into drilled holes.

TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.

Whats in the Box?

• (6) TOGGLER ALLIGATOR AF8 anchors
• (6) #12 x 1-3/4" sheet metal screws

The TOGGLER ALLIGATOR AF6 flanged anchor provides a secure hold in solid and hollow concrete, brick, stone, and drywall, includes #10 x 1-1/2" sheet metal screws for fastening, and is made in USA. Once inserted into a 1/4" drilled hole in a wall, ceiling, or floor, the anchor accepts an included screw. The anchor head is flanged for additional stability compared to a flush-mount head when installing into hollow material and has fins that grip the mounting material to prevent spinning when a screw is inserted. When installed within a solid material, the corrosion-resistant polypropylene body expands and elongates to fill and mold to the hole. This helps distribute the force evenly throughout its length to help prevent wall fracture. When installed within a hollow material or a solid material with unexpected cavities, the anchor's jaws open as a screw is inserted, locking the anchor and screw within the material. If using screws other than those supplied, the anchor accepts a #6 to #12 size screw with a thread length at least equal to the thickness of the item being fastened plus 1-3/8".

Specifications

Ultimate Tensile Strength Values

Ultimate Shear Strength Values

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.

Anchors provide reinforcement to fasteners installed in materials that are considered brittle or have insufficient hold such as drywall, concrete, brick, and stone. Anchors provide support through methods such as expansion from within or behind the substrate, or insertion of adhesive compounds into drilled holes.

TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.

Whats in the Box?

• (20) TOGGLER ALLIGATOR AF6 anchors
• (20) #10 x 1-1/2" sheet metal screws

The TOGGLER ALLIGATOR AF8 flanged anchor provides a secure hold in solid and hollow concrete, brick, stone, and drywall, and is made in USA. Once inserted into a 5/16" drilled hole in a wall, ceiling, or floor, the anchor accepts a #8 to #14 size screw with a thread length at least equal to the thickness of the item being fastened plus 1-13/16". The anchor head is flanged for additional stability compared to a flush-mount head when installing into hollow material and has fins that grip the mounting material to prevent spinning when a screw is inserted. When installed within a solid material, the corrosion-resistant polypropylene body expands and elongates to fill and mold to the hole. This helps distribute the force evenly throughout its length to help prevent wall fracture. When installed within a hollow material or a solid material with unexpected cavities, the anchor's jaws open as a screw is inserted, locking the anchor and screw within the material.

Specifications

Ultimate Tensile Strength Values

Ultimate Shear Strength Values

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.

Anchors provide reinforcement to fasteners installed in materials that are considered brittle or have insufficient hold such as drywall, concrete, brick, and stone. Anchors provide support through methods such as expansion from within or behind the substrate, or insertion of adhesive compounds into drilled holes.

TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.

The TOGGLER ALLIGATOR AF5 flanged anchor provides a secure hold in solid and hollow concrete, brick, stone, and drywall, includes #8 x 1-1/4" sheet metal screws for fastening, and is made in USA. Once inserted into a 3/16" drilled hole in a wall, ceiling, or floor, the included screw inserts into the anchor. The anchor head is flanged for additional stability compared to a flush-mount head when installing into hollow material and has fins that grip the mounting material to prevent spinning when a screw is inserted. When installed within a solid material, the corrosion-resistant polypropylene body expands and elongates to fill and mold to the hole. This helps distribute the force evenly throughout its length to help prevent wall fracture. When installed within a hollow material or a solid material with unexpected cavities, the anchor's jaws open as a screw is inserted, locking the anchor and screw within the material. If using screws other than those supplied, the anchor accepts a #4 to #9 size screw with a screw length at least equal to the thickness of the item being fastened plus 1-3/16".

Specifications

Ultimate Tensile Strength Values

Ultimate Shear Strength Values

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.

Anchors provide reinforcement to fasteners installed in materials that are considered brittle or have insufficient hold such as drywall, concrete, brick, and stone. Anchors provide support through methods such as expansion from within or behind the substrate, or insertion of adhesive compounds into drilled holes.

TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.

Whats in the Box?

• (6) TOGGLER ALLIGATOR AF5 anchors
• (6) #8 x 1-1/4" sheet metal screws

The TOGGLER ALLIGATOR A6 flush-mount anchor provides a secure hold in solid and hollow concrete, brick, stone, and drywall, and is made in USA. Once inserted flush with the surface of a 1/4" drilled hole in a wall, ceiling, or floor, the anchor accepts a #6 to #12 size screw with a thread length at least equal to the thickness of the item being fastened plus 1-5/16". The fins on the anchor head grip the mounting material to prevent spinning when a screw is inserted. When installed within a solid material, the corrosion-resistant polypropylene body expands and elongates to fill and mold to the hole when a screw is inserted. This helps distribute the force evenly throughout its length to help prevent wall fracture. When installed within a hollow material or a solid material with unexpected cavities, the anchor's jaws open as a screw is inserted, locking the anchor and screw within the material.

Specifications

Ultimate Tensile Strength Values

Ultimate Shear Strength Values

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.

Anchors provide reinforcement to fasteners installed in materials that are considered brittle or have insufficient hold such as drywall, concrete, brick, and stone. Anchors provide support through methods such as expansion from within or behind the substrate, or insertion of adhesive compounds into drilled holes.

TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.

The TOGGLER ALLIGATOR AF8 flanged anchor provides a secure hold in solid and hollow concrete, brick, stone, and drywall, includes #12 x 1-3/4" sheet metal screws, and is made in USA. Once inserted into a 5/16" drilled hole in a wall, ceiling, or floor, the anchor accepts an included screw. The anchor head is flanged for additional stability compared to a flush-mount head when installing into hollow material and has fins that grip the mounting material to prevent spinning when a screw is inserted. When installed within a solid material, the corrosion-resistant polypropylene body expands and elongates to fill and mold to the hole. This helps distribute the force evenly throughout its length to help prevent wall fracture. When installed within a hollow material or a solid material with unexpected cavities, the anchor's jaws open as a screw is inserted, locking the anchor and screw within the material. If using screws other than those supplied, the anchor accepts a #8 to #14 size screw with a thread length at least equal to the thickness of the item being fastened plus 1-13/16".

Specifications

Ultimate Tensile Strength Values

Ultimate Shear Strength Values

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.

Anchors provide reinforcement to fasteners installed in materials that are considered brittle or have insufficient hold such as drywall, concrete, brick, and stone. Anchors provide support through methods such as expansion from within or behind the substrate, or insertion of adhesive compounds into drilled holes.

TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.

Whats in the Box?

• (20) TOGGLER ALLIGATOR AF8 anchors
• (20) #12 x 1-3/4" sheet metal screws

The TOGGLER ALLIGATOR AF6 flanged anchor provides a secure hold in solid and hollow concrete, brick, stone, and drywall, includes #10 x 1-1/2" sheet metal screws for fastening, and is made in USA. Once inserted into a 1/4" drilled hole in a wall, ceiling, or floor, the anchor accepts an included screw. The anchor head is flanged for additional stability compared to a flush-mount head when installing into hollow material and has fins that grip the mounting material to prevent spinning when a screw is inserted. When installed within a solid material, the corrosion-resistant polypropylene body expands and elongates to fill and mold to the hole. This helps distribute the force evenly throughout its length to help prevent wall fracture. When installed within a hollow material or a solid material with unexpected cavities, the anchor's jaws open as a screw is inserted, locking the anchor and screw within the material. If using screws other than those supplied, the anchor accepts a #6 to #12 size screw with a thread length at least equal to the thickness of the item being fastened plus 1-3/8".

Specifications

Ultimate Tensile Strength Values

Ultimate Shear Strength Values

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.

Anchors provide reinforcement to fasteners installed in materials that are considered brittle or have insufficient hold such as drywall, concrete, brick, and stone. Anchors provide support through methods such as expansion from within or behind the substrate, or insertion of adhesive compounds into drilled holes.

TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.

Whats in the Box?

• (6) TOGGLER ALLIGATOR AF6 anchors
• (6) #10 x 1-1/2" sheet metal screws