When you want to find strobe transmitter, you may need to consider between many choices. Finding the best strobe transmitter is not an easy task. In this post, we create a very short list about top 10 the best strobe transmitter for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 strobe transmitter:
Best strobe transmitter
1. NEEWER RT-16 Wireless Studio Flash Trigger
Feature
This wireless trigger is control discreteness for camera to trigger hot shoe flashgun synchronouslyEasy installation, low power consumption
No any damage to camera
High-speed and synchronous for 1/200 second
Max. working distance: 30M (open area, without interference)
Description
Features:
This wireless trigger is control discreteness for camera to trigger hot shoe flashgun synchronously.
Easy installation, low power consumption
No any damage to camera.
High-speed and synchronous for 1/200 second.
Max. working distance: 30M (open area, without interference).
16 channels to avoid interference.
The receiver has an on/off switch, and an LED to indicate triggering.
New design: Channel Selector outside the transmitter and the receiver.
Specifications:
Wireless Flash Trigger.
16 channels selectable.
Power Input of Transmitter: 23A 12V battery (included).
Power Input of Receiver: 2 AAA batteries.
Long lifetime of trigger battery, one year or over 20,000 continuously triggers.
Plug size of receiver: 3.5mm.
Adapter size for receiver plug: 3.5mm --> 6.35mm.
PC sync cable included.
Radio working frequency: 433MHz.
How to use:
Make sure the channel selector of both transmitter and receiver at same position.
Insert the receiver's trigger output plug into your flash's jack.
Press the test button on your transmitter. The studio light should now flash.
Insert the transmitter's hot shoe socket into your camera's hot shoe jack (if your camera does not have a hot shoe use a PC sync cord and insert into the socket).
You should now be ready to start shooting (you can use the 3.5mm sync cable for cameras without hotshoe or hotshoe is engaged).
Package Contents:
1x Trigger.
1x Receiver.
2. LS Photography Flash Strobe Light 200 W, Sync Cord, Fuse, Test Button, Umbrella Input, Mount on Light Stand with, Radio Sync Transmitter & Receiver Professional Photography Use, Photo Studio, LGG626
Feature
200 W Flash light [1 PC]/ Radio Sync Trigger [1 PC]/ Radio Sync Receiver [1 PC]Index GN32m-GN42m / Recycle 6s/ Illumination Angle 55
Modeling Light: 60W / 110V-120V
4-Channel Flash Light Trigger & Receiver
Compatible with Most Flash Strobe Light & Camera
Description
Flash Strobe Light
Component: Flash Light, Power Cord, Sync Cable, Modeling Bulb
Output Power: 200 Watt
Flash Index: GN32m-GN42m
Recycle Time: 6s
Angle of Illumination: 55
Modeling Light: 60W/110V-120V
Input Power: AC120V/60Hz
Synch Voltage: DC6V
Fuse: 3A
Triggering: Inductor, Synch Cord, Test Button, Wireless Trigger
Radio Remote Trigger & Receiver
Trigger:
- 4-Channels Trigger for Flash Strobe Light
- Compatible with Most Flash Strobe Light & Camera
- Supports up to 4 Flash Strobe Lights
- Operates by 2 AAA Batteries
*** Battery NOT Included
Receiver:
- 4-Channel Radio Signal Receiver
- Compatible with Most Flash Strobe
3. Neewer 400W GN70 Studio Flash Strobe with Wireless Trigger Transmitter, Built-in 2.4G Wireless Receiver System, Recycle time 0.4-1.8 seconds, Bowens Mount, VE-400 Plus, German Engineered
Feature
German Designed and engineered for photographer who needs an increased level of lighting precision; Adopts CMOS chip technology and Lamp saving technology; Prolongs lamp life; Built-in optical slave, 7 preflashBuilt-in 2.4GHz Radio Receiver System with 16 channels in 4 groups; Compatible with wireless radio trigger; Secures fast response and stable transmission; Free of dead angle
LED display to show accurately power level; Fast recycling time 0.4-1.8s and 1/1200 flash duration; Cooling Fan, Overheating and Over Voltage Protection; Precision light-output adjustments to an accuracy of 1/10 f-stop; Stepless power-control range of 5-stop from full to 1/32(6 stop points) with Max. 400W
Wireless Flash Trigger Transmitter: 16 channels, transmitting distance up to 100m at open air; No limits with directions or angles; Can be used for any traditional and digital camera with hot shoe or PC control socket
Package includes: VE-400 Plus Studio Flash; Wireless Trigger Transmitter (battery included); 150W Modeling Lamp; Reflector; Power Cable; Sync Cord; User Manual
Description
Description:
Photography Studio Flash:
This flash light is designed and engineered for photographer who needs an increased level of lighting precision.
It adopts CMOS chip technology and Lamp saving technology, prolonging the lamp life effectively.
It has built-in 2.4GHz radio receiver system with 16 channels in 4 groups and the system is compatible with wireless radio trigger(not included) or remote controller(not included).
The light is sturdy and durable and easy to operate. And the LED display can show power level accurately.
It also has the characteristic of cooling fan, fast recycling time and flash duration; overheating, overvoltage and overcurrent protection.
Power Output: 400W
Guide Number: GN70 (2m, ISO 100)
Output Control Range: Full to 1/32 Stepless
Recycling Time to Full: 0.4-1.8s
Modeling Lamp Output: 150W
Color Temperature: 5600K+/-200K
Built-in 2.4GHz Receiver: Yes
Power Source: AC110-130V/50-60Hz
Weight: 77.6 ounces/2.2 kilograms
Size: 11.81 x 4.92 x 4.92 inches/30 x 12.5 x 12.5 centimeters (without reflector)
Wireless Trigger Transmitter:
The transmitter can be used for any traditional and digital camera with hot shoe or PC control socket and can trigger most sorts of studio flashes, such as Neewer Vision 4, VC-400HS, V-600HS, VE-300 PLUS, VE-400 PLUS, VL-300 PLUS Studio Flash.
Channel: 16
Transmit Frequency: 2.4GHz wireless remote system
Transmitter Power: 2 x 3V AAA Battery (Included)
Outdoor Operation Distance: Up to 100 meters
Package Contents:
1 x Flash with Flash Tube
1 x Wireless Trigger Transmitter (battery included)
1 x 150W Modeling Lamp
1 x Standard Reflector
1 x Power Cable
1 x Sync Cable
1 x User Manual
4. Neewer Photo Studio Strobe Flash Light and Softbox Lighting Kit:(2)300W Monolight Flash,(2)Light Stands,(2)Softbox,(1)RT-16 Wireless Trigger,(1)Bag for Video Shooting,Location and Portrait Photography
Feature
The kit include: (2) 300W 5600K Strobe Flash with Modeling Lamp, (2) 6.5 feet/2 meters Light Stands, (2) 20x28 inches/50x70 centimeters Soft box, (1) RT-16 Wireless Trigger(1 Transmitter+2 Receiver), (1) Bag300W 5600K strobe light: with high flash energy 300WS, Guide Number GN48, 60 steps from 1.0 to 6.0 in 0.1 increments; Recharging time:0.3-1.8s; Sync Distance:10 meters; Flash Duration:1/2000s,the light intensity is quite strong enough; can be handheld or mounted on a light stand; can work as main light, back light or hair light, and form different kinds of layout lighting
3-6.5 feet/92-200 centimeters Light Stand: Adjustable height, Solid safety 3 legs stages, capable for stable, heavy duty work. And use quick single action locks, providing fast precision height adjustment
20x28 inches/50x70 centimeters Softbox: Softbox diffuses the light and gives you perfect even lighting when you need for the best shots possible. The large size of the softbox makes it desirable for fashion photography, portraits and medium to large sized product shots
RT-16 Wireless Trigger (1 Transmitter+2 Receiver): This wireless trigger is control discreteness for camera to trigger hot shoe flashgun synchronously. Carry Bag: lightweight and durable
Description
Specifications :(2) Strobe Light:
Model: N-300W
Flash Energy: 300WS
Guide Number: GN48
Flash Energy Adjustment: 1.0-6.0 Digital Dimming
Modeling Lamp: GY6.35 75W
Modeling Lamp Adjustment: Prop, Full, Off
Recharging Time(s): 0.3-1.8
Sync Distance: < =10m
Color Temperature: 5600K +/- 200K
Sync Voltage: DC 5V
Flash Duration(s): 1/2000S
Trigger Mode: Photo sensor, Flash Trigger, Test Button Trigger
Working Voltage (US): 110V/50-60Hz
Fuse: 10A
Weight: 49.7oz/1.41kg
(2) Light Stand:
Maximum Height: 6.5 feet /2 meters
Folded Height: 3 feet /92 centimeters
Material: Metal
Tube Diameter: 25-22-19 millimeters
Max Load Capacity: 17.5 pounds/ 8 kilograms
(2) Softbox:
can be lit by flash, fluorescent, quartz, tungsten and flood lights
Removable front cover for camera lens access to the interior
Size: 22.5x52x3 centimeters
(1) RT-16 Wireless Trigger(1 Transmitter+2 Receiver):
High-speed and synchronous for 1/200 second
Max. Working distance: 30 meters (open area, without interference).
16 channels
the receiver has an on/off switch, and an LED to indicate triggering.
Channel Selector outside the transmitter and the receiver.
Power Input of Transmitter: 23A 12V battery (included).
Power Input of Receiver: 2 x AAA batteries (not included)
Plug size of receiver: 3.5 millimeters
Frequency: 433MHz
(1) Carry Bag :
Heavy-duty, Cardura webbed nylon
Size: 30x10x10 inches/77x25x25 centimeters
Color: Black
Package Contents :
2 x 300W 5600K Strobe Flash
2 x Light Stands
2 x Softbox
1 x RT-16 Wireless Flash Trigger and Receiver (1 Transmitter+2 Receiver)
1 x Carry Bag
5. Neewer Wireless STUDIO Flash TRIGGER RT-16 with 3 RECEIVERS 16-Channel
Feature
This wireless trigger is control discreteness for camera to trigger hot shoe flashgun synchronouslyEasy installation, low power consumption
sync speed for 1/200 second
Max. working distance: 30M (open area, without interference)
16 channels to avoid interference; The receiver has an on/off switch, and an LED to indicate triggering
Description
Features:
*This wireless trigger is control discreteness for camera to trigger hot shoe flashgun synchronously
*Easy installation, low power consumption *No any damage to camera
*High-speed and synchronous for 1/200 second
*Max. working distance: 30M (open area, without interference)
*16 channels to avoid interference *The receiver has an on/off switch, and an LED to indicate triggering.
] *New design: Channel Selector outside the transmitter and the receiver
Specifications:
Wireless Flash Trigger;16 channels selectable
Input of Transmitter: 23A 12V battery (included)
Power Input of Receiver: 2 AAA batteries Long lifetime of trigger battery, one year or over 20,000 continuously triggers
Plug size of receiver: 3.5mm Adapter size for receiver
plug: 3.5mm -- 6.35mm
PC sync cable included
Radio working frequency: 433MHz
How to use:
Make sure the channel selector of both transmitter and receiver at same positionInsert the receiver's trigger output plug into your flash's jackPress the test button on your transmitter.
The studio light should now flashInsert the transmitter's hot shoe socket into your camera's hot shoe jack (if your camera does not have a hot shoe use a PC sync cord and insert into the socket)You should now be ready to start shooting (you can use the 3.5mm sync cable for cameras without hot shoe or hot shoe is engaged).
Condition & Warranty: This item is 100% New! Never used.1 Year Warranty by Seller. Package Contents 1x Trigger 3x Receivers
6. Godox AD600B TTL 600Ws GN87 HSS Outdoor Studio Flash Strobe Speedlite Light+X1T-N Trigger TransmitterCompatible Nikon Cameras /32"X32"Softbox/Standard Reflector&Grid/Barn Door/Snoot(Bowens Mount)
Feature
**Optical and Built-in 2.4G wireless transmission to offer stable output. When using Godox 2.4G wireless X system, AD600B is compatible with Canon E-TTL II autoflash, Nikon i-TTL autoflash, SONY etc. As a slave unit, AD600B can use in combination with Godox TTL camera flash,TTL outdoor flash, TTL studio flash, etc.**AD600B has 600Ws and GN87, Stable color temperature at 5600200K over the entire power range. 25 steps of power adjustment(1/1 to 1/256) offer better lights effects. Fully support TTL autoflash, flash exposure compensation, 1/8000s high speed sync, first-curtain sync, second-curtain sync, manual flash, multi flash, C.Fn custom functions, etc.
**Use Godox 2.4G wireless X system to achieve TTL control or use Godox TTL wireless flash trigger X1 to wireless control TTL functions, wireless adjust flash's power levels, sound beep, as well as triggering the flash. There are 3.5mm sync cord jack and wireless control port to achieve multiple triggering methods.
**11.1V/8700mAh large capacity lithium battery pack to provide 500 full power flashes and recycle in 0.01-2.5 second. DC/AC are both applicable(Change to AC alternating current module after lithium battery pack detached).
**10W LED modeling lamp can adjust light brightness in three steps. Large and clear dot-matrix LCD panel offers convenient operation. With handle to adjust different shooting directions of the flash. USB firmware upgrades helps keep pace with the latest technology.
Description
AD600B is a TTL Bowens FlashModel:AD600B
Wireless Slave Unit Mode:
*Radio transmission mode (compatible with Nikon & Canon)
*Optical transmission mode (compatible with Nikon & Canon)
Flash Mode:Wireless off :M/Multi
Slave unit of radio transmission:TTL/ M/Multi
Slave unit of optical transmission:TTL/ M/Multi
Compatible Cameras under Radio Transmission (as slave unit):Nikon cameras, supporting i-TTL/M/RPT flash / Canon EOS cameras, supporting E-TTL II/M/RPT flash
Guide No. (m ISO 100):87 (m ISO 100)
Flash Duration:1/220 to 1/10000 seconds(T0.1) POWER:600W
Power Output:9 steps: 1/256~1/1
Stroboscopic Flash:Provided (up to 100 times, 100Hz)
Flash Exposure Compensation (FEC):Manual. FEB: 3 stops in 1/3 stop increments.
Sync mode:High-speed sync (up to 1/8000 seconds), first-curtain sync, and second-curtain sync
Delay Flash:0.01~30 seconds
Mask: ; Fan: ; Beeper: ; Modeling LampLED):10W
Optic Slave Flash:S1/S2
Flash Duration Indication:
Display: Dot-matrix panel
Wireless Flash (optical transmission and 2.4G transmission)
Wireless flash function Slave, Off
Controllable slave groups:Optical:3 (A, B, and C) 2.4G: 5 (A, B, C, D, and E)
Transmission range (approx.): Optical Indoors: 12 to 15 m / 39.4 to 49.2 ft.
Outdoors: 8 to 10 m / 26.2 to 32.8 ft.
2.4G: 80m
Channels: Optical 4 (1, 2, 3, and 4)
2.4G :32 (1~32)
Power Supply:Lithium battery pack (11.1V/8700mAh) Full Power Flashes: 500
Recycle Time: Approx. 0.01-2.5s
Battery Indicator:
Package
1*AD600B Main Flash
1*Battery
1*Lampshade
1* Flashtube
1*Charger
1*Power Cable
1*X1T-N Trigger for Nikon
1*Barn Door
1*Standard Reflector &Grid
1*80cm 5-in-1 Reflector
1*Flash Color Filter
1*80cm x 80cm softbox (include a white Bowens Speedring Adapter)
1*Snoot
1*15 x 17cm softbox
1*CONXTRUE USB LED Free Gift
7. Godox AD200 200Ws 2.4G TTL Flash Strobe Speedlite 1/8000s HSS 2900mAh Battery X1T-N Wireless Flash Transmitter Compatible Nikon DSLR Camera
Feature
Tiny Body Pocket Flash, Interchangeable bare bulb flash heads and speedlite flash head, fast recycle time up to 0.01-2.1s, fast duration up to 1/13000s, When using Godox 2.4G wireless X system. AD200 is compatible with Canon E-TTL, Nikon i-TTL and Sony TTL etc.200Ws, GN60(m ISO 100, with AD-S2 standard reflector, @28mm) and GN52 (m ISO 10, @35mm). Stable color temperature at 5600+/-200K over the entire power range. Professional lithium battery pack has large capacity(14.4v/2900mAh)to provide 500 full power flashes and fast recycle in 0.01-2.1 second
8 steps of power adjustment (1/1~1/128)offer better light effects. Fully support flash exposure compensation. 1/8000s high speed sync, first curtain sync, second curtain sync, modeling lamp(speedlite head only), manual flash, multi flash, C.Fn custom setting, etc.
AD200 pocket flash has strong power with lightweight and great portability. Easily packed in your pocket. With professional lithium battery pack and two different flash head offers diverse light effects. Built-in Godox 2.4G wireless X system and fully support of TTL functions
Use Godox 2.4G wireless X system to achieve TTL control or use Godox TTL wireless flash trigger X1 to wirelessly control functions, wireless adjust flash's power levels, sound beep, as well as triggering the flash. There are also 3.5mm sync cord jack and wirelss conotrol port to achieve multiple triggering methods
Description
Specification:Model: AD200
Wireless Slave Mode: Ratio transmission mode(Compatible with Nikon&Canon&Sony)
Flash Mode: Wireless Off, M/Multi, Slave unit of radio transmission, TTL/M/Multi
Guide No.(1/1 Output): Speedlite flash head: GN52(m ISO 100,@35mm)
Guide No.(1/1 Output): Bare bulb flash head: GN60(m ISO 100,with AD-S2 standard reflector, @28mm)
Flash Duration: Speedlite flash head: 1/220 to 1/13000s
Flash Duration: Bare bulb flash head: 1/220 to 1/11300s Power: 200W
Power Output: 8 steps: 1/128 ~1/1
Stroboscopic flash: Provided(up to 90 times, 99Hz)
Flash Exposure Compensation(FEC): Manual. FEB: +/-3 stops in 1/3 stops increments
Sync mode: High Speed Sync(up to 1/8000 seconds), first curtain sync, and second curtain sync
Delay Flash: 0.01~30 seconds
Mask: Yes
Beeper: Yes
Modeling Lamp(LED): Yes
Optic Slave Flash: S1/S2
Flash Duration Indication: Yes
Wireless flash function: Slave, Off
Controllable slave groups: 5(A,B,C,D,E)
Transmission Range: Approx. 100m
Channels: 32(1-32)
Power Supply: Lithium battery pack(14.4V/2900mAh) Full Power Flashes: 500
Recycle time: Approx. 0.01-2.1s
Battery Indicator: Yes
Power Indication: Power hiernate automatically after approx. 30 minutes of idle operation
Sync triggering mode: 3.5mm sync line, wireless control port
Color temperature: 5600+/-200K
Dimension: 168x75x50(flash head not included)
Weight: 560g(flash head & batter not included)
Package Included:
1 x AD200 Flash Body
1 x X1N-T Transmitter
1 x Speedlite Head
1 x Bare Bulb Head
1 x Bare Bulb Head Tube
1 x AD-E holder Bracket
1 x Battery
1 x Charger
1 x Power Cable
1 x Carrying Case
1 x Manual
1 x CONXTRUE USB LED Free Gift
8. Neewer 300W GN60 Studio Flash Strobe with Wireless Trigger Transmitter, Built-in 2.4G Wireless Receiver System, Recycle time 0.3-1.5 seconds, Bowens Mount, VE-300 Plus, German Engineered
Feature
Neewer VE-300 Plus Studio Flash Includes: (1) VE-300 Plus Studio Flash; (1)Wireless Trigger Transmitter (battery included); (1) 150W Modeling Lamp; (1) Standard Reflector; (1) Power Cable; (1) Sync Cord; (1) User ManualDesigned and engineered for photographer who needs an increased level of lighting precision; Adopts CMOS chip technology and Lamp saving technology; Prolongs lamp life; Built-in optical slave, 7 preflash; Cooling Fan and Overheating, Over Voltage Protection are available
Built-in 2.4GHz Radio Receiver System with 16 channels in 4 groups; Compatible with wireless radio trigger or remote controller (not include); Secures fast response and stable transmission; Free of dead angle
Precision light-output adjustments to an accuracy of 1/10 f-stop; Stepless power-control range of five-stops from full to 1/32(6 stop points) with Max. 300W; LED display to show accurately power level; Fast recycling time 0.3-1.5s and 1/1200 flash duration
Wireless Flash Trigger Transmitter: 16 channels, transmitting distance up to 100m at open air; No limits with directions or angles; Can be used for any traditional and digital camera with hot shoe or PC control socket
Description
Description:
Photography Studio Flash:
This flash light is designed and engineered for photographer who needs an increased level of lighting precision.
It adopts CMOS chip technology and Lamp saving technology, prolonging the lamp life effectively.
It has built-in 2.4GHz radio receiver system with 16 channels in 4 groups and the system is compatible with wireless radio trigger(not included) or remote controller(not included).
The light is sturdy and durable and easy to operate. And the LED display can show power level accurately.
It also has the characteristic of cooling fan, fast recycling time and flash duration; overheating, overvoltage and overcurrent protection.
Power Output: 300W
Guide Number: GN60 (2m, ISO 100)
Output Control Range: Full to 1/32 Stepless
Recycling Time to Full: 0.3-1.5s
Modeling Lamp Output: 150W
Color Temperature: 5600K+/-200K
Built-in 2.4GHz Receiver: Yes
Power Source: AC110-130V/50-60Hz
Weight: 74.1 ounces/2.1 kilograms
Size: 11.81 x 4.92 x 4.92 inches/30 x 12.5 x 12.5 centimeters (without reflector)
Wireless Trigger Transmitter:
The transmitter can be used for any traditional and digital camera with hot shoe or PC control socket and can trigger most sorts of studio flashes, such as Neewer Vision 4, VC-400HS, V-600HS, VE-300 PLUS, VE-400 PLUS, VL-300 PLUS Studio Flash.
Channel: 16
Transmit Frequency: 2.4GHz wireless remote system
Transmitter Power: 2 x 3V AAA Battery (Included)
Outdoor Operation Distance: Up to 100 meters
Package Contents:
1 x Flash with Flash Tube
1 x Wireless Trigger Transmitter (battery included)
1 x 150W Modeling Lamp
1 x Standard Reflector
1 x Power Cable
1 x Sync Cable
1 x User Manual
9. Neewer 4 Channel Wireless Studio Flash Trigger Set for Canon,Nikon,Pentax,Olympus DSLR Series,with Receiver for Neewer Godox CowboyStudio StudioPRO Strobe Monolight and External Speedlite(AC-04)
Feature
This set is designed for photographic studio and on-location work to trigger various flash lightsThe transmitter is attached on the hot shoe of the camera while the receiver is plugged into the studio flash
It has standby indicator and trigger signal indicators
Super strong anti-interference ability, sensitive reaction ability, convenient to operate
Circuit design has the function of standby sleep, low power consumption
Description
Description:
The remote trigger for studio flashes is used as the controller of synchronous trigger studio flashes of cameras.
The transmitter fits into nearly any type of camera, the receiver is compatible with most studio flashes.
Make sure the channel selector of both transmitter and receiver at same position
Specifications:
4 channels with hot shoe connector for external flashes
Transmitter Power: 23A 12V battery
Receiver Power: 100-240V AC power Maximum Working Distance: 30 m (open area, without interference)
Operates on Frequency: 433 MHz
Highest responding time up to 1/320
Triggering life: up to 20,000 times
Package Contents:
1 x 4 Channel Transmitter
1 x Receiver
1 x Convert Adapter
10. Neewer CellsII-N High Sync Speed Wireless Flash Strobe Trigger Transmitter Receiver for Nikon DSLR Series,Witstro Series,Godox V850 V860,Neewer TT850 TT860
Feature
Single transceiver design, could be used as either a transmitter or a receiver.Could be used as a wireless trigger of studio flash, speedlite and also a wired or wireless camera shutter release (Normal Shooting & Long Exposure Shooting).
Super high sync speed up to1/8000s, meets the need of high sync photography.
16 non-interfering optional channels enable you to control multiple flashes synchronously.
Applies to Nikon DSLR Series,Witstro series, Godox V850 V860 etc.
Description
Descriptions:
This is one receiver of Godox Celles II set. It can be used as a wireless transmitter or a receiver for studio flash, speedlite, and camera shutter.Featuring multi-channel triggering, stable signal transmission, and sensitive reaction, it gives photographers great flexibility and control.
Fashion in design, light weight, use 2 AA battery, no AC power, friendly for travel and outdoors use.
Note: 1/8000s is achievable when the camera has a max camera shutter speed of 1/8000s. 1/8000s is not achievable because some models of Nikon cameras has a max camera shutter speed of only 1/4000s.
Specifications:
Model: Cells II-NDesign: Single Transceiver
Power Supply: 3V (2*AA) (Not included), no AC power
Transmit frequency: 433MHz wireless remote system
Channel: 16 channels
Workable distance:100m (open areas)
Max sync speed: 1/8000s
Dimension: 155*56.5*34.5mm (antenna included)
Net Weight: 84g (without battery)
Package Contents:
? 1x CellsII-N Trigger1x Sync Adapter
3 x Cable
1 x Lanyard
1 x Manual
