When you want to find heavy-duty hinge, you may need to consider between many choices. Finding the best heavy-duty hinge is not an easy task. In this post, we create a very short list about top 10 the best heavy-duty hinge for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 heavy-duty hinge:
Best heavy-duty hinge
1. Douper 200N/44lb Heavy Duty Gas Springs Lid Support Hinge with Soft Close Support Heavy Drop Lids and Work Perfectly for a Soft Close Pack of 2
Feature
Made of durable cold-rolled steel in Satin Nickel, quality assurancePressure: 200N/44lb (Per Strut), Max Weight Support--50lb/2pcs
Most recommended weight of your LID: 40lb-50lb,and have a 9 inch clearance.(Douper gas springs will fit almost all of the lids of box when a stay and soft close is needed only if the weight of your lid is between 40lb-50lb, and have a 9 inch clearance.)
Heavy duty hinge- 200N, Designed to support heavy drop lids of chest, toy box, heavy bench lid, etc, work perfectly for a soft close
Quality product, Comes with 2 pack, screws included for installation
Description
Overall Length: 11-3/5".Please see the left picture to know the size informaiton and how to install.
This is a 200N (support 50lb/2pcs ) heavy duty lid support hinge, suits heavy lids of cabinets, TATAMI, or other lids of desks.
Package includes: 2 x Lid hinge(Screws included).
--Important Notice, Please Read---
Other seller is selling fake "douper" by low price, we are the "douper" brand owner, and we never authorize them to sell our products.
We received many customer complaints against other sellers for Poor Quality.
If you purchase here and receive from other seller, please report to Amazon for item not as described and claim for sell fake products and Get FULL REFUND.
2. 1 Pair Barrel Gate Hinge 7" Heavy Duty with Grease Zerk fitting and Welding Plate by Bobco Metals
Feature
Pair holds up to 900lbs and is suitable for heavy swing gatesMade with ball bearings for fluent operation. Welding required for installation
(1 Pair) DIAM: 1-1/4", PIN: 3/4", GAP: 1-3/4" (H: 7" X PLATE W: 1-1/2" X L: 2-3/4")
Description
Barrel Hinges 7" DIAM: 1-1/4" H: 7" PIN: 3/4" PLATE (W): 1-1/2" L: 2-3/4" GAP: 1-3/4". A barrel is a component of a hinge that has a hollow cylinder shaped section where the rotational bearing force is applied to the pivot. It also has a screw shaped section for fastening and/or driving the pivot. A pair of 7" barrel hinges may hold up to 900lbs. Weld on the mounting plate pin sits on ball bearings for easy pivot. Welding required for installation.3. MOR/ryde JP54003 Heavy Duty Hinge-JK Model
Feature
MORRYDE JP54-003 HEAVY DUTY JK HINGE (07-15 WRANGLER JK)Description
JP54-003 MOR/ryde HEAVY DUTY HINGE-JK MODEL4. Boerboel Gate Solutions 73014253 Heavy-Duty Modern Wrap Hinge Pair, Black
Feature
Designed for wood gates or vinyl gate applicationsHolds gate up to 96" wide and 150 lbs
Max angle 180
Kit includes pair of stainless steel heavy-duty gate wrap hinges, 4 decorative nylon hinge covers and 24 1 " square/phillips Combo screws
Easy installation with 3-way adjustability: vertical, horizontal and tension control
Description
Boerboel heavy-duty wrap hinge kit 73014253 (Black). features tension control technology with unique 3-way adjustability - up, down and tension - for a perfectly balanced gate. Backed by a limited lifetime warranty, the heavy-duty wrap hinge works with a wide variety of vinyl and wood gates. Made of stainless steel.5. 4" X 4" Heavy Duty Black Powder Coated Steel Hinge Pair - Button Tip
Feature
Metal & Style: Classic Heavy Duty SteelFinish: Rust Resistant Black Powder Coat
Dimensions: 4" L x 4" W | to Button Top - 4-1/4" L x 4" W
Additional: Stainless Steel Removable Pin
Included: 2 Total Hinges, 16 Total Steel Screws - Countersunk/Color Matching Powder Coat
Description
A classic powder coated Steel Hinge for Heavy Duty Gates and Doors. Has button tips and removable stainless steel pin core. Comes with black powder coated screws to help prevent rusting.These hinges are sold as a pair, 2 total hinges.
6. 10 Pack - Vance Home Improvement Matte Black Heavy Duty Hinge Pin Adjustable Door Stop (Handyman Designed!) w/Black Tip -Trial Tested to Completely Protect Doors & Walls
Feature
HIGH QUALITY MATTE BLACK FINISH: Our pack of 10 Smooth Matte Black Door Stops looks classy on any door.NO MORE DENTS AND HOLES: Sturdy Door Stops prevent doors from slamming into walls, stopping them when you choose. Heavy Duty metal and absorbent tips, make sure that your doors and walls are completely safe!
EASY TO INSTALL: Installation of a Door Stop won't take more than 1-2 minutes.
TESTED IN THE USA: Each unit is tested for quality in the USA , so you know you're getting a quality item. You're safe from a knockoff that could cause costly damage on your walls.
100% PROTECTION - There are a lot of knockoff products on the market, and we set ourselves apart with our guarantee. We stand by our original, quality products. To make sure we have your trust, if you aren't amazed by our product, we'll offer you a full refund or replacement (whichever you would prefer), no questions asked!!
Description
Vance Home Improvement Door Stops are complete door stops. Designed by a handyman, the sturdy reinforced metal of each door stop is coupled with rubber tips.Your walls WILL be protected regardless whether it is swung hard or gentle. Rubber tips on the doors leave no damage to doors at all. Door stop is solid brass so it's NOT going to break.
Installation is designed to be extremely simple. Simply take a hammer and a small screwdriver under the door hinge. Tap a few times until it can be pulled out. Put the Door stop with the rectangle rubber piece against the wall. Keep the washer under the door stop and put the Hinge Pin on. Hammer it down a few times and you are done!
**BONUS ADVICE** Many people have had their door hinges painted. To avoid peeling the paint when installing a door stop, when tapping the hammer down on the top of the hinge pin, keep a towel underneath! It will keep the paint on the door hinge.
Make a small investment to keep your doors and walls safe for years to come!
7. TamBee T-Strap Shed Hinge Gate Strap Heavy Duty Hinge Door Barn Gates Hinges Black Wrought Hardware Iron Rustproof (4, 8inch)
Feature
Heavy-duty application.Affordably easy to reclaim doors and cabinets
Tight pin for left or right hand applications
Thickness - 2.5mm / 0.1inch, Mounting Screws Not Included
Dimension - 195mm*100mm*2.5mm( 8 inch*4 inch*0.1inch)
Description
Tee Hinge. These outstanding Tee hinges crafted of cast iron are popular on doors. A fabulous detail for a modern sleek look or for that Old Colonial charm. Affordably reclaim old doors or update a gate door.Hinges measures 8" from pin to point. Shed Windows and More, they carry the largest selection of shed windows, shed hardware, shutters, skylights, vents, flower boxes, etc for all kinds of outdoor buildings, such as, sheds, playhouses, animal shelters and more.
Package Included: 4 x T hinges (Mounting Screws Not Included)
8. 10 Pack - Designers Impressions Matte Black Heavy Duty Hinge Pin Adjustable Door Stop with Black Tip : 6357
Feature
High Quality Matte Black FinishProtects Doors from Hitting Walls
Attaches to Hinge on Door
Black Tip
9. Heavy Duty 2" x 24" Stainless Steel Piano Hinge - .060" Thick - " S.S. Screws Included
Feature
HEAVY DUTY! - Each leaf is a robust .060" thick! (most other hinges are only .035" - .040" thick)2" OPEN WIDTH - This still enables you to hang doors as thin as 3/4" but thicker doors can be handled just as easily. Length is 24"
DURABLE MATERIAL - 304 Stainless steel will stand up to years of abuse in any environment!
FANTASTIC FINISH - Who says practical things can't also be beautiful? Satin finish resists finger marks while offering a classy look.
SCREWS INCLUDED - No need to shelp off to the hardware store, because we include stainless steel #6 x 3/4" screws for your convenience!
Description
A great hinge for any environment!For doors, fold-down seats, or a host of other applications, Desunia is pleased to present the ideal hinge for the job, at a price you can afford.
Specifications
This hinge measures 24" long, and is 2 " wide (when fully open). But the thing that really sets our hinge apart from the pack is its thickness, which is an unheard of 060". Just to put that in perspective, most other hinges are just .035" - .040 thick, so if you need something that will last for years in just about any environment, hit that "Add to Cart" button right now!
Fantastic Finish
Who says that practical things can't also be beautiful? Using 304 stainless steel means you can keep it outside year round without issues, but our hinge also has a really nice satin finish, a classy look that also discourages finger marks. Nice!
Screws Included
Don't you hate it when manufacturer's don't include screws? So do we! That's why we always include them! They're a #6 Philips head and are a full 3/4" long.
Installation Tips
- For a balanced look, hold the hinge against the wood and position it so the holes at each end are centered.
- Mark the cut line (pro tip: wrapping a few layers of masking tape around the hinge makes it easier to mark and helps keep the saw from "walking") and cut to length with a hack saw.
- Clean up any burrs using a bench grinder or file.
- Use a self-centering Vix Bit and pre-drill the minimum holes needed to temporarily hang the door.
- Install the door and check alignment. If adjustments are needed, you can fine-tune things by using some of the holes that are still undrilled.
- Once everything is just right, pre-drill and install the rest of the screws to complete the job. Done!
Here's what you get
- 1 Stainless Steel 2" wide x 24" long piano hinge
- Matching #6 x 3/4" installation screws
10. Red Hound Auto 4 Weld on Hinges Butterfly Trailer Compatible with Ramp Steel Heavy Duty Grease Fitting New
Feature
4 heavy duty butterfly door hingesApproximately 4-1/2" long; Weld-On Butterfly Ramp Door Hinge
Unpainted raw steel (welding required); Integrated grease fitting for easy greasing
Solid thick heavy duty steel
