When you want to find drip irrigation barb connector, you may need to consider between many choices. Finding the best drip irrigation barb connector is not an easy task. In this post, we create a very short list about top 10 the best drip irrigation barb connector for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 drip irrigation barb connector:
Best drip irrigation barb connector
1. One Stop Outdoor 100-Pack Universal Drip Irrigation Barb Adapter Coupling 1/8 - 1/4 Lateral Tubing Line Connector Insert for Hydroponics - Rain, Garden Watering
Feature
Fits all brands of 1/4" micro tubing , 1/4" drip line and 1/4" soaker hose with .140 ID to .170 IDSharp-barb design for secure and tight-fit installation without glue or clamps
Can also be used to attach the micro tubing to 1/2" or 3/4" drip tubing.
The fittings are pushed into the inside of the tubing for a very tight-fit connection.
Operating pressure: up to 30 PSI
Description
100-Pack Drip Irrigation Barb Adapter Coupling 1/8" - 1/4" Lateral Tubing Line Connector Insert for Hydroponics - Rain, Garden Watering Products specifications Operating pressure: up to 30 PSI Color: black Use with 1/4" micro tubing, 1/4" drip line and 1/4" soaker hose (.140 ID to .170 ID) Material: Acetal 1/4" Barbed Drip Fittings are used in the installation of all brands of 1/4" micro tubing, 1/4" drip line and 1/4" soaker hose (.140 ID to .170 ID). The fittings are pushed into the inside of the tubing for a very tight-fit connection. They can be used for a two-way layout or for a three-way layout of the different tubing. The fittings can also be used to attach the micro tubing to 1/2" or 3/4" drip tubing. They are made of high-impact plastic and have the largest inside diameter in the industry with a higher flow rate capability and lower head loss. Features Sharp-barb design for secure and tight-fit installation without glue or clamps Fits all brands of 1/4" micro tubing , 1/4" drip line and 1/4" soaker hose with .140 ID to .170 ID One-piece construction Made of high-impact, high-strength, UV-resistant plastic for durability and long life Large inside diameter for maximum flow2. BALDR Garden 1/4" Plastic Tubing Barbed Cross Connector Fittings Insert Barb Connector Cross For Drip Irrigation System-50 packs (4mm cross)
Feature
DETAILSAgricultural Drip Irrigation 1/4 inch Barbed Straight/Elbow/Tee/Cross Connector FittingPARAMETERMaterial: sturdy hard plastic,Color: black,Size: 1/4'',Qty:50 packs per bag
PRESSUREallows use with higher water pressures up to 50 PSI
STRUCTURESimple barbed connector for drip lines, easy to grip
APPLICATIONGreat for agriculture, lawn, garden, patio, greenhouse irrigation, watering, humidification
Description
About BALDRFound in October 2012,BALRD is a Sino-US joint venture,a professional environmental equipment manufacturer.
Through introduction of advanced water filtration technology and
air deodorant patented technology of BALDR INTERNATIONAL LLC
in the United States,we are committed to developing and producing
equipment of the water treatment,water filtration systems and air
deodorization.BALDR products are widely applied in agriculture irrigation,urban landscape irrigation,
golf course irrigation,industrial water recycle and municipal industrial air deodorization.
Major in : Agriculture Irrigation/Urban Landscape Irrigation/Golf Course irrigation/Water Filtration For Industry
About Products
*Material: sturdy hard plastic,Color: black,Size: 1/4'',Qty:50 pack one bag.
*Exclusive design allows use with higher water pressures up to 50 PSI.
*Simple barbed connector for drip lines. suitable size makes them easy to grip.
*Great for agriculture, lawn, garden, patio, greenhouse irrigation, watering, humidification.
*Large inside diameter for maximum flow.
3. One Stop Outdoor 10-Pack - 1/2" Inch Barbed Drip Tubing Connector/Adapter Cross TEE Fitting MNPT (Fits All Tubing Size 17mm .600 ID Insert Cross)
Feature
Connect 4 sections of 1/2" (17mm) drip tubing together.Special, extra sharp barb design for secure and easy installation without glue or clamps
Fits brown PC drip line and polyethylene drip tubing with .600 ID x .700 OD
Made of high-impact, high-strength, UV-resistant plastic for extended operation in harsh conditions
One-piece construction
Description
25-PACK - 1/2" Barbed Drip Tubing Adapter Cross TEE Threaded Fitting MNPT (17mm .600 ID Insert Cross) FIT 4 SECTIONS OF DRIP TUBING TOGETHER::::: 16 and 17 mm (1/2") Barbed Fittings The brown 1/2" Barbed Drip Fittings are used in the installation of drip line with 18" spacing and with .600 ID x .700 OD drip tubing. Used by home gardeners and professional alike, the brown fittings are made of high-impact plastic, and are available in a variety of configurations. Using a double barb, two pieces of drip line or drip tubing may be pushed over the barbed sides of the fittings for a very tight fit. Features Special, extra sharp barb design for secure and easy installation without glue or clamps Fits drip line and polyethylene drip tubing with .600 ID x .700 OD One-piece construction Made of high-impact, high-strength, UV-resistant plastic for extended operation in harsh conditions Available in a variety of configurations Products specifications Operating pressure: up to 30 PSI Color: brown Use with 1/2" drip tubing or drip line with .550 ID to .600 ID Material: Acetal Brown 1/2" (17 mm) Barbed Drip Fittings are available in a range of configurations for 1/2" drip line or drip tubing with .600 ID (17 mm); they provide a simple, low cost installation method. Using the double barbed fittings, drip line or drip tubing is pushed over the barbs for a very tight fit. To use the barbed fittings with drip tubing or drip line, force the drip line or drip tubing over the barbed side of the connector, tee, or elbow.4. 2PK of 1/2" ID Ball Valve Hose Barb Connectors for Drip Irrigation Hoses and Aquariums
Feature
OUR #1 BEST SELLER. 2PK of 1/2" ID ball valves with hose barb connectors.Perfect for aquaponics, aquariums, and drip irrigations. Available in 1/4" ID", 3/8" ID, 1/2" ID, and 5/8"-3/4" ID ball valves
Recommended use with 1/2" ID hose tubing.
For easy installation, apply heat (or boiling water) to hose tubing and insert into the barb connectors
Each end of the connectors has 2 barbs versus the competition
Description
Please NOTE that when ordering accessories with these ball valves, the accessories (ie barb connectors, tubings) are also 1/2" ID. Otherwise, wasted time and effort will result with mismatchesPlease NOTE that 1/2" ID (inside diameter) is NOT the same as 1/2" drip irrigation tubing. The hose tubing MUST be 1/2" ID1. Set includes 2PK of 1/2" ID ball valve hose barb connectors2. Large butterfly handle for easy low torque smooth turn handle. 3. Strong and durable. Built to last 4. No leak ball valves 5. Made of polypropylene 6. Recommended hose tubing of 5/8" OD X 1/2" ID7. Size: 3 3/4" x 1" x 2 1/4"8. With barb measurement: 16mm. Shank with no barb: 14mm9. Do NOT use with gas or chemical. For cold water use only.
5. Rain Bird T22-250S Drip Irrigation 1/4" Blank Distribution Tubing, 250' Roll, Black
Feature
Rugged, flexible tubing that's easy to unroll and stake in garden, flower bed, ground cover or other landscaped areasUse as the main line in a small Drip irrigation system or to branch off from larger 1/2" Drip tubing to micro-watering devices
Textured finish improves handling; making connections faster and easier
Extra flexibility for kink-free installation, unmatched resistance to chemicals, algae growth and UV damage
Unique Micro-Porous design creates an ultra-tight connection
Compatible with most brands of 1/4" Barbed Fittings, Spot Watering Emitters, Micro-Bubblers, Misters and Sprays
Designed for underground or above-ground installation
Description
Rain Bird T22-250S Drip Irrigation 1/4" Blank Distribution Tubing, 250' Roll, Black. Versatile 1/4" blank distribution tubing may be used as the main line in a small Drip irrigation system or to branch off from 1/2" Drip tubing to individual micro- watering devices and plants. Rain Birds 1/4" distribution tubing is the strongest and most flexible tubing available; constructed of UV-resistant polyethylene resin materials giving it the flexibility of vinyl with the hold of poly. Unique Micro-Porous design creates an ultra-tight connection; tubing expands over fittings then shrinks making it almost impossible to remove without cutting. Textured finish improves handling to make connections faster and easier. Compact coiling method allows tubing to remain coiled as its extracted; making it easy to use, store and eliminates waste. Tubing is easy to unroll and stake in gardens, flower beds, ground cover or other landscaped areas. Industry leading flexibility allows tighter turns with fewer elbows for fast, easy installation. Perfect for small, narrow and tight planting areas, as well as areas with tight curves or many switchbacks. Professional-grade for unmatched resistance to chemicals, algae growth and UV damage. Designed for underground or above-ground installation. Rain Bird 1/4" Tubing is commonly used with Spot Watering Emitters, Micro-Bubblers, Misters and Sprays; also to run water to 1/4 Emitter Tubing (from 1/2 distribution or emitter tubing and a wide variety of Drip manifolds).70 PSI pressure rating exceeds competitors specifications. Compatible with most brands of 1/4 barbed Drip fittings and micro-watering devices. High-quality Rain Bird fittings (sold separately) are available in coupling, elbow, tee, plug and valve models; plus stakes in plastic and galvanized versions. Specifications: black, 0.255" outside diameter, inside diameter 0.165", wall thickness .04", pressure rating 0 to 70 PSI. Also available (sold separately) in: 50' (T22-50S) and 100' (T22-100S) rolls. Rain Bird The Intelligent Use of Water6. DIG 16-066R Drip Irrigation Barb Insertion Tool
Feature
Use to insert 1/4 in. barbs and button drip emitters into 1/4 in. poly or vinyl micro tubingHeavy duty construction for repeated use in a micro tubing and barb assembly
Easy grip and insertion using a large handle
Constructed of UV-resistant, high impact plastic
Can help prevent repetitive motion injury when inserting a large number of barbs
Description
DIG's 16-066R Barb Insertion Tool is a heavy-duty device used in drip irrigation to insert a wide range of 1/4 in. barbed connectors into 1/4 in. micro tubing. The Barb Insertion Tool features an easy to hold handle with a large gripper to hold the micro tubing. To use, insert the barb into the holder chamber, grip the micro tubing and squeeze the handle to firmly insert the barb into the micro tubing.7. Rain Bird BC25-30PS Drip Irrigation Universal 1/4" Barbed Coupling Fitting, Fits All Sizes of 1/4" Drip Tubing, 30-Pack
Feature
Universal coupling fitting connects two sections of any brand 1/4" Drip irrigation tubing in a straight lineSelf-piercing barbed end for insertion directly into the side of 1/2" or larger Drip tubing
Unique barb design reduces insertion force; natural color blends with all earth tones
Working pressure rated from 0-50 PSI
Constructed of highly durable UV and chemical-resistant materials to assure long life
30-pack of 1/4" barbed Coupling connectors in convenient plastic bag
Description
Rain Bird BC25-30PS Drip Irrigation Universal 1/4" Barbed Coupling Fitting, Fits All Sizes of 1/4" Drip Tubing, 30-Pack. This barbed coupling fitting quickly connects two pieces of 1/4" Drip irrigation tubing in a straight line, or taps into the side of 1/2" or larger Drip irrigation tubing. Accepts all sizes of 1/4" Drip tubing and provides a durable, leak-tight connection. Unique barb design reduces insertion force and natural color blends with all earth tones. To extend water flow to individual plants: connect 1/4" Drip tubing to one end and insert self-piercing barbed end into 1/2" diameter or larger Drip tubing. Constructed of highly durable UV and chemical-resistant materials to assure long life. May be used above or below ground. Simple to insert by hand or use one of Rain Birds insertion tools: ET/1PK25S, HPUN1-1S, HPTCX, (sold separately) for faster installation in larger projects. Designed for working pressure of 0-50 PSI. Couplings come in a convenient re-sealable zip-lock bag for organization and ease of identification. ** Sold separately in 10-pack as model number BC25-10PS. Rain Bird The Intelligent Use of Water8. Orbit DripMaster 67431 1/4-Inch Barb Assortment, 30-Pack
Feature
Includes an assortment of the most commonly used 1/4-inch drip fittingsFor use with 1/4-inch distribution or soaker tubing
Includes: 10 couplings, 10 plugs, 5 tees, and 5 elbows
Durable construction provides years of reliable use
For outdoor use with cold water only
Description
Drip watering saves homeowners time, money and water. The Orbit 1/4-inch barb assortment pack gives you all of the common 1/4-inch barb parts that you will need for your drip system. Thirty pieces are included in the assortment pack. The barb design makes for fast and easy installation. Drip watering saves water in drought conditions.9. Rain Bird BC50/4PKS Drip Irrigation Universal Barbed Coupling Fitting, Fits All Sizes of 5/8", 1/2", .700" Drip Tubing, 4-Pack
Feature
Connector for use with 1/2" and 5/8" Drip irrigation tubingBarbed ends grab tubing for a secure leak-proof connection
Allows creation of a custom layout for your planting area
Compatible with all 1/2" Drip irrigation tubing measuring from .580" to .700" outside diameter
Constructed of highly durable UV and chemical-resistant materials to assure long life
Recommended for 0 to 50 PSI operating pressure
4-pack of 1/2" barbed Coupling connectors in convenient plastic bag
Description
Rain Bird BC50/4PKS Drip Irrigation Universal Barbed Coupling Fitting, Fits All Sizes of 5/8", 1/2", .700" Drip Tubing, 4-Pack. This universal barbed coupling is designed to quickly and easily connect two lengths of 1/2" Drip tubing in a straight line. High quality barbs grab all brands of 5/8", 1/2", and .700" Drip tubing creating a fast, secure, leak-proof connection that stays in place season after season. The perfect choice to repair or extend tubing in a Drip irrigation system. Unique barb design reduces insertion force and natural color blends well with all earth tones. Constructed of highly durable UV and chemical-resistant materials to assure long life. Recommended operating pressure: 0 to 50 PSI. Convenient plastic bag contains (4) couplings. Rain Bird "The Intelligent Use of Water"10. CandyHome 24 Pieces Drip Irrigation Kits for 1/2 Irrigation Tubing - 6 Barbed Y Type Tees, 6 Couplings, 6 Elbows, 6 Tubing End Cap Closures for Rain Bird and Compatible Drip or Sprinkler Systems
Feature
Package Includes: This 24-piece barb connector kit includes 6 barbed y type tees, 6 couplings, 6 elbows, 6 tubing end cap closures. Ideal for garden greenhouse, flower bed, patio, lawn.Long-Lasting: These 16mm drip irrigation fittings are made with high impact plastic construction. It can be left out year-round, buried or on the surface, in any weather.
Compatibility: These 16mm drip fittings are compatible with all major brands of drip tubing 1/2".
Easy To Install: Use these durable drip line connectors to connect 1/2" drip irrigation tubing. Secure and easy installation without glue, tools, or clamps. If desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting.
Risk Free Guaranteed: Quality guarantee and 5-star customer service. If you are not 100% completely satisfied with your drip irrigation parts, simply let us know and you will be offered a FULL refund or replacement.
Description
CandyHome Drip Irrigation Fittings Kit for 1/2" Irrigation Tubing 24 Piece Set - 6 Barbed Y Type Tees, 6 Couplings, 6 Elbows, 6 Tubing End Cap Closures for Compatible Drip or Sprinkler SystemsProduct Specifications:
For connecting emitterline and polyethylene tubing.
Use with 16mm emitterline and distribution tubing.
One piece construction UV resistant high impact plastic.
Secure and easy installation without glue or clamps.
Operating pressure: up to 50 PSI.
Include:
6 x Y Type Tees
6 x Couplings
6 x Elbows
6 x Line Ends
Warm Note:
To use the fittings with drip tubing, push the tubing very firmly over the barbed side of the connector, y type tee, or elbow for a very tight fit that won't leak.
If you wish to soften the tubing before installing the fitting, let the tubing rest in the hot sun or briefly apply a heat gun or blow dryer to the tubing end before inserting the fitting.
If your system runs at pressures higher than 25 PSI, you may want to use ratchet clamps to secure the tube on the fitting.
If you have any problem of our product, you can contact our customer service. We are delighted to help you and we will reply as soon as we can.
