When you want to find spindle inverter, you may need to consider between many choices. Finding the best spindle inverter is not an easy task. In this post, we create a very short list about top 10 the best spindle inverter for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 spindle inverter:
Best spindle inverter
1. MYSWEETY CNC Spindle Motor Kits, 2.2KW Water Cooled Spindle Motor 2.2KW Inverter + 80MM Clamp Mount +13PCS ER20 Collet + 5M Water Pipe + Water Pump for CNC Router
Feature
Package include: 1 x 2.2KW Spindle Motor, 1 x 2.2KW VFD, 1 x 75W Water Pump, 1 x 5M Water Pipes, 1 x 80mm Spindle, 13 x ER20 Collet, 1 x 70mm Brush, 10 x Drill Bits.Runout off: less than 0.001mm, voltage: 220V, Speed:0-24000rpm, AC Inverters, Frequency of Inverter: 0-400Hz.
The spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc.
13PCS ER20 Collet Set Gripping Range:(1mm,2mm,3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm,13mm).
100% satisfactory, if you have any problem, please contact us, we will help your money back.
Description
1.Spindle Motor:Size: 80mm
Power: 2200W
Voltage: 220V
Frequency: 0-400Hz
Speed: 0-24000rpm
Water Cooling ER11 collet
Runout off: less than 0.001mm
Germany SKS 4pcs bearing
Bearing type: 2 x 7005C P4 DT & 2 x 7002C P4 DT
Grease Lubrication
Power Interface: Optional GX16 waterproof air plug, there are marked 1234, 123 were
connected to the inverter power supply (U, V, W), 4 connected inverter ground
2.Inverter:
Type: 2.2KW/220V
Input: 220VAC/50Hz
Output: 0-220VAC 3-phase
Frequency: 0-400Hz
Size: 168x124x161mm
3.ER20 Collet Set:
Gripping Range: 1MM to 13MM (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)
Run-out tolerance 0.01mm (0.0006")
4.Water Pump:
Voltage: 220V
Structure: Single-stage Pump
Pressure: High Pressure
Application: Submersible
Usage: Water
5.5M Water Pipes:
Length: 5M
Can be connected between Water Pump and Spindle Motor
6.Spindle Motor Clamp Mount:
Diameter: 80mm
Material: Aluminum,Surface sandblasted
Application: Wood working industry rourter, such as wood door milling engraving and cutting, furniture producing
Package include:
1 x 2.2KW Spindle Motor
1 x 2.2KW VFD
1 x 75W Water Pump
1 x 5M Water Pipes
1 x 80mm Spindle Clamp (Free 3pcs screws)
13 x ER20 Collet (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)
1 x 70mm Brush
10 x Drill Bits
How to connect:
The package come with two Aviation plugs, just put the little one into the spindle, then use the large one to fix into the little one, you will see the marked number (1.2.3.4) on the top of large one, Pin 1 goes to terminal U on the vfd. Pin 2 goes to terminal V on the vfd. Pin 3 goes to terminal W on the vfd. Pin 4 is a ground/common.
2. VEVOR 1.5KW 110V VFD Variable Frequency Drive For Spindle Motor 1.5KW 2HP Control 110V Technique Inverter (1.5KW 110V)
Feature
PARAMETER-Power: 1.5 KW 110V;Frequency Control Range: 0.1~2500.0Hz;Input Frequency:40-60 HZ;Output Frequency:0-400 HZSETTING METHOD-External Voltage 0-5V0-10V4-20mA0-20mA. Frequency lower limit, starting frequency, stopping frequency, three skip frequencies can be respectively set
FUNCTIONS- Auto Voltage Regulation (AVR), Decelerating Stop or Coasting Stop, DC Braking, Frequency Track, PLC Program Control, Traverse Drawing ControlAuto Energy Saving, Carrier Adjustable (Up to 20KHz), etc.
OTHER FUNCTIONS-Fin over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, etc.
APPLICATION-1.5KW 110V VFD Variable Frequency Drive Inverter can be used as a motor speed control and a phase converter; always be used for Lathes, Mills, Car Hoists, Pumps & Conveyors, etc.
Description
1.5KW 110V Variable Frequency Drive Inverter VFD Speed Controller
This Variable Frequency Drive Inverter VFD can be used for constant torque loads (such as hard starting:Air compressor,HVAC units) and variable torque loads (such as pumps,fans,etc). It can be used as a motor speed control and a phase converter.
Frequency Control
Range: 0.1~2500.0Hz
Setting Resolution: Digital: 0.1Hz; Analog: 1 of max. Operating frequency
Operator Setting Method: Press directly to set.
Analog Setting Method: External Voltage 0-5V0-10V4-20mA0-20mA.
Other Functions: Frequency lower limit, starting frequency, stopping frequency, three skip frequencies can be respectively set.
Technical
Power: 1.5 KW
Input Voltage: AC 110V 15%
Output Voltage: AC 110V
Input Current: 14 A
Output Current: 20 A
Input Frequency:40-60 HZ
Output Frequency:0-400 HZ
Input phase: 3 phase
Output phase:3 phase
5-Digits Display & Status Indicator Lamp: Displaying frequency, current, revolution, voltage, counter, temperature, FOR or REV rotation, and fault, etc.
Communication Control: RS-485
Vibration: Below 0.5 G
Package Included:
1 x 1.5KW Variable Frequency Drive Inverter
1 x Product Manual
3. RATTMMOTOR CNC Spindle Motor Kit, 2.2KW 80mm Water Cooled Spindle Motor 110V ER20 400Hz 24000RPM+2.2KW VFD Drive Inverter 110V+80mm Spindle Motor Mount Clamp+ER20 Collets+80W Water Pump for CNC Router
Feature
2.2KW Water Cooled Spindle Motor ER20 220V, 2.2KW 220V HY InverterRunout off: less than 0.02mm, Speed:0-24000rpm, AC Inverters, Frequency of Inverter: 0-400Hz
14PCS ER20 Collet Set ( 3.175mm,1mm,2mm,3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm,13mm)
This spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc
Japan NSK 4pcs bearing
Description
Package include:1x 2.2KW ER20 water-cooled spindle motor 24000rpm 80mm 400Hz
1x 2.2KW VFD Inverter 220V input with 220V output
1x 80mm clamp cast aluminium bracket
1x 75W Water pump 220V 3.2M
1x 5M water pipes
1Set of ER20 collet(14pcs)(1mm,2mm,3.175mm,3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm,13mm)
1. 2.2KW Water Cooled Spindle Motor ER20
Material: Stainless Steel
Size: 80x213mm(Middle body diameter:80mmxLength:213mm)
Power: 2.2Kw
Voltage: 220VAC
Current: 8A
Frequency: 0-400Hz
Speed: 0-24000rpm
Accuracy: 0.003--0.005
Runout off: Less than 0.02mm
Bearing Lubrication: Grease
Collet size: ER20
Bearings: 4 bearings(C7005x2 + C7002x2),P4 class, Angular contact bearings
Main application: Wood, Aluminum, Stone, metal, glass, PVC industry
2. 2.2kw Inverter VFD 220V input
Tech parameters:
1) Input Voltage: 220V(+/-15%)
2) Output Voltage 208VAC-240VAC
3) Input Frequency: 48-63 Hz
4) Output Frequency: 0-400 Hz
5) Input Phase: 1 or 3 phase
6) Output Phase: 3 phase
3. 80mm clamp cast aluminium bracket
Diameter: 80mm
Material: Aluminum,Cast aluminum
4. 75W CNC spindle motor water pump 3.2m 220VAC
Specification:
Pump length:3.2m
Voltage:220-240VAC
Power:75W
Flow:3000L/H
Size:150x80x140mm
Application: fit for 0.8kw,1.5kw,2.2kw,3kw,water cooled spindle even 4kw and 5.5kw too
5.ER20 spring collet:
Product Description
Out dia (D1):11.5mm
Height (H):18mm
Hole dia (D2):1-13mm
Run-out tolerance 0.1mm
First class 1065 carbon steel
Hardened & precision ground
6.5M Water Pipes:
Length: 5M
Can be connected between Water Pump and Spindle Motor
How to connect:
Professional aviation Interface, Interface 1234 marked 123 respectively connected to the inverter output end of the(U, V, W),4 ground wire this interface safe ground
4. VFD 220V 1.5KW 2hp Variable Frequency Drive CNC Motor Inverter Converter for Spindle Speed Control HUANYANG HY-Series(1.5KW, 220V)
Feature
IMPORTANT NOTE: this VFD is ONLY applicable to three phase asynchronous motor and NOT support external resistor.Fan runs all the time even though the motor isn't.the unit output is 400hz when you receive it ,you need to change the parameter to match your motor (if your motor is other hz)This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.The input is 220v 1 or 3phase.You can just connected L1/L2 to any two of VFD input R/S/T
This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter.This item use Sine wave PWN(SPWM) for the control system.work well with the Mach 3 controller
Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines
If there are problems in use after you receive,please don't give us negative or natural feedback.Please contact us as soon as possible, we will help you solve problems or help you replace new one .
Description
critical video link https://youtu.be/XVvDsdHq1OQIMPORTANT NOTEthe drive is ONLY applicable to THREE PHASE ASYNCHRONOUS motor,please confirm your motor is three-phase asynchronous motor before purchase.To protect VFD, when you stop using it,please be sure to press the red button "stop" and power off
specification
power:1.5KW
horsepower:2HP
Input voltagesingle-phase or three-phase 220V + -15% 50Hz / 60Hz
Output voltage: 220V three-phase
Output frequency: 0-50Hz / 0-400Hz
Input Frequency: 47-63Hz
Output Current: 7A
Feature
PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability
Easy PLC function can realize 16 legs of speed and inverter control function
RS485 communication port, adopting standard international MODBUS main circuit control
CWith extremely strong anti-jamming capability
Low output ratting torque0.5HZ-150%, low speed running ability
Carrier adjustable by 16KHZ, completely soundless working environment
Broad voltage working area, normal running in 304V-456V
Auto voltage regulation (AVR) technique, for ensuring the inverter load capability
Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes
With perfect error protection and short circuit starting protection capability
parameter setting video for HY vfd https://youtu.be/2VXMxxa6lXM
5. MYSWEETY 1Set DIY 110V 1500W Air Cooled Spindle Motor 1.5KW Square CNC Machine Tool Spindle + 110V 1.5KW Inverter VFD + 13PCS ER11+ 70mm Brush + Drill Bits
Feature
Package include: 1x 110V/1.5KW Square Spindle Motor+1x 1.5KW/110V HY INVERTER+13x ER11 Collet+1x 70mm Brush+10x Drill Bits.Run out off: less than 0.005mm, speed:0-24000rpm, DC/AC Inverters, Frequency of Inverter: 0-400Hz
Bearing is P4 grade, 2x7005C P4 DT, 2x7003C P4 DT, increase spindle life.
High-speed electric main bearings used in all C class high-speed angular contact ball bearings, axial pre-load feature, improved support stiffness and live spindle grinding accuracy under high-speed rotation.
Main Application: engrave for wood, bamboo, normal PCB, PVC, PMMA, plastic, duotone board(ABS)and etc nonmetal, also can engrave on gold, silver, copper, aluminium, Pb etc soft metal surface working.
Description
110V 1.5KW Air Cooled Square CNC Spindle Motor + 13PCS ER11 Collet + 1.5KW 110V Inverter
1. Air Cooled Square Spindle:
Size: 36**16*15cm
Cooling: Air cooled
Material: Stainless steel
Power: 1.5KW
Voltage: 110V
Frequency: 0-400Hz
Speed: 0-24000rpm
Accuracy: 0.003-0.005
Grease Lubrication
Water Cooling ER11 collet (1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm)
Bearing type: 4 Bearing, Angular contact bearings, P4 grade, 2x7005C P4 DT and 2x7003C P4
Power Interface: optional GX16 air plug, there are marked 1234, 123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground.
Main Application: engrave for wood, bamboo, normal PCB, PVC, PMMA, plastic, duotone board(ABS)and etc nonmetal, also can engrave on gold, silver, copper, aluminium, Pb etc soft metal surface working.
2. Inverter:
Brand Name: HY Inverter
Type: 1.5KW/110V
Input Voltage: 110V Output Voltage: 110VAC
Input Frequency: 48-63 Hz
Output Frequency: 0-400 Hz
Input Phase: 1 or 3 phase
Output Phase: 3 phase
Run-out tolerance 0.01mm (0.0006")
Control Mode is SPWM, it is very easy to use and convenient.
Strong protection functions. Fin over-heat protection. Overload protection. Fuse protection. Restart after instant stop, stall protection.
3.70mm brush:
Type: dust cover brush
Diameter:70mm
70mm Brush Vacuum Cleaner Engraving machine Dust Cover for spindle motor.
4.Drill bits:
Diameter: 3.175mm
Tip:0.1mm
Angle: 20
Package include:
1x 110V/1.5KW Square Spindle Motor
1x 1.5KW/110V HY INVERTER
1 x 70mm Brush
10 x Drill Bits
13x ER11 Collet(1,1.5,2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7mm)
6. Vector Control CNC VFD Variable Frequency Drive Controller Inverter Converter 220V 7.5KW 10HP For Spindle Motor Speed Control HUANYANG GT-Series (220V, 7.5KW)
Feature
IMPORTANT NOTE: this VFD is ONLY applicable to three phase asynchronous motor and NOT support external resistor(this functions need to be customized). If your motor is heavy load, pls contact sales for model selection suggestion.GT series has better performance and stability and adopt DSP vector control to enable motor to achieve high torque in LOW SPEED rotation to increase motor working efficiency.The input is 1 or 3 phase.Work well with the Mach 3 controller
Rich of digital and analogy control terminals for versitile control , optional MODBUS (RS485) extension,diversified parameter setting.
Application:Machinery winding machine,mixer,extruder,slitter,winder,compressor,ventilator,pump,grinder,conveyor,elevator,centrifuger and other speed control machines.
If there are problems in use after you receive,please don't give us negative or natural feedback.Please contact us as soon as possible, we will help you solve problems or help you replace new one .
Description
GT-VFD introduction video link https://youtu.be/tjhPwYVSSz8IMPORTANT NOTEthe unit is ONLY applicable to THREE PHASE ASYNCHRONOUS motor,please confirm your motor is three-phase asynchronous motor before purchase.To protect VFD, when you stop using it,please be sure to press the red button "stop" and power off
specification
Suitable Motor:< 7.5KW(10HP)
power:7.5KW
horsepower:10HP
Input voltagesingle-phase or three-phase 220V + -15% 50Hz / 60Hz
Output voltage220V three-phase
Output frequency:0.5- 50/60Hz, 0.5-400Hz
Input Frequency: 50Hz/60Hz
Output Current:30A
Feature:
PID control;advanced calculous PID closed-loop arithmetic, quick responding speed and high suitability;
Easy PLC function can realize 16 legs of speed and inverter control function
RS485 communication port, adopting standard international MODBUS main circuit control
With extremely strong anti-jamming capability
Low output ratting torque 0.5HZ-150%, low speed running ability
Carrier adjustable by 16KHZ, completely soundless working environment
Broad voltage working area, normal running in 304V-456V
Auto voltage regulation (AVR) technique, for ensuring the inverter load capability
Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes
With perfect error protection and short circuit starting protection capability
Dead-time compensation and auto torque slip compensation function, can realize 180% high orque output at low frequency 0.25Hz
Unique EMC design, can minimize inverter's pollution to power
Overall reinforcement layer to suit all kinds of harsh enviroment
7. Litorange Vector Control VFD 1 Single Phase 220V 2.2KW 3HP Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor Speed Control General Purpose
Feature
Important Note: This VFD is ONLY applicable to three phase asynchronous motor and Support braking resistor.Power: 2.2KW 3HP. Input: 1 phase AC 220V 15% 50/60Hz. Output: 3 phase AC 0-220V 0-600Hz.VFD Tested Better performance Velocity Control Precision & Overload Capability.
Vector Control has better performance and stability and adopt DSP vector control to enable motor to achieve high torque in LOW SPEED rotation to increase motor working efficiency.
Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines.
Warranty: 1 Year guarantee & replacement.The problem rate of VFD is less than 0.5%. Due to VFD is a flexibly configurable device, please be sure to contact us and we will give you a satisfactory solution.
Description
Feature:VFD Tested Better performance Velocity Control Precision & Overload Capability.
PID control;advanced calculous PID closed-loop arithmetic, quick responding speed and high suitability;
Easy PLC function can realize 16 legs of speed and inverter control function.
Low output ratting torque 0.5HZ-150%, low speed running ability enhanced low-frequency loading capacity.
With perfect error protection and short circuit starting protection capability.
Dead-time compensation and auto torque slip compensation function,Unique EMC design.
Frequency Setting Channels: Three channels: setting by keyboard, setting by control terminals, setting by serial communication interface. These channels can be switched.
Swing Frequency Function: Suitable for textile and chemical fiber machine by controlling the triangular frequency.
AVR Function: Automatically keep the output voltage constant when power supply is not stable.
110V power can convert to 220V through a transformer, But the precondition is that you should have L1,L2 wire(two hot wires).
Characteristics of Controlling
Start Torque: 0.5Hz 150%
Rotation Speed Ratio: 1:200
Precision of Speed Regulation: 0.5%
Overload Capability:
Model G : 150% above the rated current for 60 seconds;
Model P : 120% above the rated current for 60 seconds.
DC Brake:
1 DC brake frequency:0.00max. frequency;
2 brake time:0.150.0s;
Jog Operation: Jog frequency range:0.00max.frequency; Accel./Decel. time of jog operation:0.13600s.
I/O Characteristics
Power: 2.2KW 3HP
Input Voltage: 1 Phase 220V 15%
Input Frequency: 50/60Hz
Output Current: 10A
Output Voltage: 3 Phase 0220V
Output Frequency Range: 0.00600Hz
8. RATTMMOTOR 2.2KW Air Cooled Spindle Motor ER20 Kit + 2200W 2.2kw 220V Inverter VFD 3HP + 80mm Clamp Mount + 14pcs/Set ER20 Spring Collet for CNC Router Engraving Milling Machine
Feature
2.2KW Air Cooled CNC Spindle Motor ER20 Collet, Voltage:220V 2.2KW Inverter VFD 220VRunout off:less than 0.05mm, Speed:0-24000rpm, AC 220V Variable Frequency Drive, Frequency of Inverter: 0-400Hz
80mm aluminum Clamp Bracket with 3Pcs screw
14PCS ER20 Collet Set Gripping Range:( 3.175mm,1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm)
The spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc.
Description
Package include:1 x 2.2KW ER20 Air-cooled spindle motor 220V
1 x 2.2KW Inverter VFD 220V input with 220V output
1 x 80mm clamp cast aluminium bracket
1set of ER20 collet(14pcs) ( 3.175mm, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)
1.spindle motor:
Specification:
Material: Stainless Steel
Size: 80x230mm(Middle body diameter:80mm x Length:230mm)
Power: 2.2Kw
Voltage: 220VAC
Current: 8.5A
Frequency: 0-400Hz
Speed: 0-24000rpm
Cooling: Air-cooled
Accuracy: 0.003--0.005
Runout off: Less than 0.05mm
Bearings: 4 bearings(C7005x2 + C7002x2),P4 class, Angular contact bearings
Power Interface: Optional GX16 waterproof air plug, there are marked 1234,123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground.
2.2kw Inverter VFD 220V
1) Input Voltage: 220V(+/-15%),
2) Output Voltage 208Vac-240VAC
3) Input Frequency: 48-63 Hz
4) Output Frequency: 0-400 Hz
5) Input Phase: 1 or 3 phase
6) Output Phase: 3 phase
3. 80mm cast aluminium bracket
Diameter: 80mm
Material:Aluminum,Surface sandblasted
4. ER20 Collet Set
Product Description
Out dia (D1):11.5mm
Height (H):18mm
Hole dia (D2):1-13mm (1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm,8mm,9mm,10mm,11mm,12mm,13mm)
Run-out tolerance 0.1mm (0.006")
First class 1065 carbon steel
Hardened & precision ground
Main application: Wood, Aluminum, Stone, metal, glass, PVC,PCB etc industry
9. 3KW 220V Er20 Collet Air Cooled CNC Spindle Motor and 3kw 220v Vfd Variable Frequency Drive
Feature
3kw Air-cooled Motor Spindle and Matching InverterFour bearing in our spindle motor
3kw Air-cooling High Speed High Precision Spindle
Motor Numerical Engraving/grinding/milling
Air-cooled Er20 Collet Chuck
Description
Technical Parameter of 3KW Air-cooled Spindle motor1.Spec: 200mm*100*85 mm (Diameter:200mm lenth*100mm width x 85mm height)
2.Power:3KW
3.Voltage:220V
4.Frequency:300HZ
5.Speed: 0-18000 R/min
6.AIR- Cooling
7.Runout off:Less than 0.005mm
8.Grease Lubrication
Technical Paramer for 3kw Variable Frequency Drive inverter
1.Input Voltage: 220V(We also stock 380V, please contact us for item stock)
2.Output voltage:208-240V(Analogous to Input voltage)
3.Input Frequency:48-63HZ
4.Output Frequency:0-400HZ
5.Input Phase:Suit for 1 phase input and 3 Phase input
6.Output:3 Phase
7.Warranty:1 year
10. 1.5KW Air Cooled Spindle Motor ER16 CNC Kit + 1500W 1.5kw Inverter Variable Frequency Drive 220V + 80mm Clamp Mount Bracket for CNC Router Engraving Milling Machine
Feature
1.5KW Air Cooled CNC Spindle Motor ER16 Collet, Voltage:220V 1.5KW Inverter VFD 220V,This kit will be from our USA warehouse by UPS free shipping delivery to US customerRunout off:less than 0.05mm, Speed:0-24000rpm, AC 220V Variable Frequency Drive, Frequency of Inverter: 0-400Hz
80mm aluminum Clamp Bracket with 3Pcs screw
Main application: Wood, Aluminum, Stone, metal, glass, PVC,PCB etc industry
The spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc.
Description
Package include:1 x 1.5KW ER16 Air-cooled spindle motor 220V
1 x 1.5KW Inverter VFD 220V input with 220V output
1 x 80mm clamp cast aluminium bracket
1.spindle motor:
Specification:
Material: Stainless Steel
Size: 80x200mm(Middle body diameter:80mm x Length:200mm)
Power: 1.5Kw
Voltage: 220VAC
Current: 8A
Frequency: 0-400Hz
Speed: 0-24000rpm
Cooling: Air-cooled
Accuracy: 0.003--0.005
Runout off: Less than 0.05mm
Bearing Lubrication: Grease
Collet size: ER16
Bearings: 4 bearings (C7004x2 + C7002x2),P4 class, Angular contact bearings
Power Interface: Optional GX16 waterproof air plug, there are marked 1234,123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground.
1.5kw Inverter VFD 220V
1) Input Voltage: 220V(+/-15%),
2) Output Voltage 208Vac-240VAC
3) Input Frequency: 48-63 Hz
4) Output Frequency: 0-400 Hz
5) Input Phase: 1 or 3 phase
6) Output Phase: 3 phase
3. 80mm cast aluminium bracket
Diameter: 80mm
Material:Aluminum,Surface sandblasted
Main application: Wood, Aluminum, Stone, metal, glass, PVC,PCB etc industry
